1MORE EB100 1MORE ACTIVE BLUETOOTH IN-EAR HEADPHONES User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2799979
Application ID	jk01ZQNF0+Sgpn7sgpzojA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	38.07kB (475841 bits)
Date Submitted	2015-11-02 00:00:00
Date Available	2015-11-02 00:00:00
Creation Date	2015-10-13 18:12:02
Producing Software	Adobe PDF library 10.01
Document Lastmod	2015-10-29 09:09:16
Document Title	Users Manual
Document Creator	Adobe Illustrator CS6 (Windows)

Product Specification
Model: EB100
Product Name: 1More Active Bluetooth In-ear Headphones
Noise-reduction Method: CSR CVC6.0
Charging time: 1 to 2 Hours
Wireless Range: Up to 10 m (32 ft)
Bluetooth: Bluetooth 4.0
Standby Time: 380 Hours
Talk time: 8 hours
Weight: 22g (0.78oz)
Decrease volume: Press “Down”.
Operation Guide
Turn on/off the headphones:
Press and hold the “Play”buttonfor 3 seconds to turn on the headphones;
press and hold “Play” for 3 seconds to turn off the headphones.
Security pairing: if the pairing phone has Bluetooth prior to3.0, please use the
default security code “0000”.
If out of wireless connection range: after 1 beep, the headphoneswill try
toreconnect. This reconnecting period will last for 5 minutes. Then red and blue
light will flash for 2 minutes. Lastly, after 3-minute of wait, the headphones
begin to turn off if they are not connected to any device (a red light illuminates
and goes off, and1 beep indicates power off).
If Bluetooth on the phone is off: after 1 beep, the headphones will try to
reconnect. This reconnecting period will last for 5 minutes. Then red and blue
light will flash for 2 minutes. Lastly, after 3-minute of wait, the headphones begin
to turn off if they are not connected to any device (a red light illuminates and
goes off, and 1 beep indicates power off).
Pairing a mobile phone:
• The headphones automatically start pairing as soon as it turns on.
• When it is off, press and hold “Play” for 5 seconds to be discoverable and
start pairing.
Battery indicator*: Bluetooth battery level is displayed on the notification center.
Volumeindicator*: While adjusting volume through control buttons, volume
level is displayed on the phone.
*Currently on IOS.
Disconnect the phone:
When there are two phones connected to the headphones, only one of the
phones will be supported.
Press and hold both the “Up” and the “Down”button for 5 seconds.
Calls:
Answer/End a call: Press and release “Play” to answer a call; press “Play”
again to end the call
Decline a call: press and hold “Play”
Last number redial: During the standby period, double press “Play”.
Multiple calls at the same time:
Press and release “Play” to answer an incoming call; press and release “Play”
to switch back to the first call.
While on a call, press and hold “Play” to end an in-progress call and to switch
back to the first call.
Press and hold “Play” to decline an incoming call.
1More Active Bluetooth® In-Ear Headphones
1More Bluetooth Headphones Troubleshooting
Audio/Video:
Play/Pause:Press “Play”.
Last song: Press and hold “Up”.
Next song: Press and hold “Down”.
Increase volume: Press “Up”.
CVC noise reduction (1); battery (2)
Power/Battery; Left/Right
Charging time < 2 Hours: supports 8 hours of talking time, red light blinks
every 2 minutes when battery is low.
Tips:
1.lease read this user’s guide closely and keep this guide for future reference.
2.Please fully charge the battery before your first use.
3.If the headphones areunused for more than 3 months, we recommend you to
charge them to improve battery capacity.
4.Use chargers that are manufactured by legitimate factories and approved by
FCC (Federal Communications Commission).
5.If your phone cannot find the headphones, please make sure that the
Bluetooth on your phone is in Discovery Mode. If your phone has not been
connected to for a while, the Bluetooth pairing function will be shut down
automatically;please restart the Bluetooth in Discovery Mode. If there is an i
ssue with your phone, please restart it. If there is an issue with the headphones,
please restart them or restore factory settings.
Warning:
1.Do not, for any reason, take apart or modify the headphones because it might
cause fire. Do not use electrical breakdown or completely break the headphones.
2.Do not place the headphones under extremely low or high temperatures
(below 32 °F or over 113 °F).
3.Avoid using the LED indicators close to children’s and animals’ eyes.
4.Do not use the headphones under thunderstorms. This will cause the
headphones to function abnormally and increase the probability of electric shock.
5.Do not use oil or volatile liquids to clean the headphones.
6.Do not let the headphones touch any liquids.
CHG LED: Charging indicator, solid red light when charging. The light goes
off when charging completes.
1More Bluetooth Headphones Troubleshooting
Name
1More Active Bluetooth®
In-Ear Headphones
Problems
1. No or poor audio.
2. During phone calls, the other person cannot
hear your voice.
3. Cannot charge your Bluetooth headphones.
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Format                          : application/pdf
Title                           : 运动蓝牙耳机说明书
Metadata Date                   : 2015:10:29 09:09:16+08:00
Modify Date                     : 2015:10:29 09:09:16+08:00
Create Date                     : 2015:10:13 18:12:02+09:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 80
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 9038 bytes, use -b option to extract)
Instance ID                     : uuid:96cf4344-e10f-48fe-838b-a0dcf8eb103f
Document ID                     : xmp.did:01F16D305171E5119951E6B5C17E5B2D
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:00F16D305171E5119951E6B5C17E5B2D
Derived From Document ID        : xmp.did:00F16D305171E5119951E6B5C17E5B2D
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:00F16D305171E5119951E6B5C17E5B2D, xmp.iid:01F16D305171E5119951E6B5C17E5B2D
History When                    : 2015:10:13 17:43:54+08:00, 2015:10:13 18:11:59+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 456.141667
Max Page Size H                 : 164.951861
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Helvetica, FZLTXHK
Font Family                     : Arial, Helvetica, 方正兰亭细黑_GBK
Font Face                       : Regular, Regular, Regular
Font Type                       : Open Type, TrueType, TrueType
Font Version                    : Version 5.06, Version 1.3 (Hewlett-Packard), Version 1.00
Font Composite                  : False, False, False
Font File Name                  : arial.ttf, Helvetica.ttf, 兰亭细黑 GBK_0.TTF
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE Cool Gray 5 C, PANTONE Bright Red C
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants L       : 72.549004
Swatch Groups Colorants A       : 0
Swatch Groups Colorants B       : 0
Swatch Groups Group Name        : 明亮
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000004
Swatch Groups Colorants Magenta : 90.000000
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 10.01
Page Count                      : 1
Creator                         : Adobe Illustrator(R) 16.0
For                             : Administrator,
Bounding Box                    : 100 -595 1321 -211
Container Version               : 11
Creator Version                 : 16

EXIF Metadata provided by EXIF.tools