3B Technology LT2627A01 27 inch LCD Monitor User Manual

3B Technology Co., Ltd. 27 inch LCD Monitor

a href="https://usermanual.wiki/3B-Technology" itemprop="url"> 3B Technology >

User manual

TFT LCD DisplayUSER'S MANUAL
WarningsWarning:To reduce the risk of electric shock do not remove cover.No user serviceable parts inside. Refer servicing to qualified service personnel.The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of insinuated"dangerous voltage" within the product's enclosure that may be ofsufficient magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanyingthe appliance.Warning:"To prevent fire of shock hazard, do not expose the set to rain or moisture". Do not rubor strike the Active Matrix LCD with "anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently".Caution:Power:This set operates on a DC supply provided by the AC-DC adaptor, the voltage is asindicated on the label on the back cover. Use only the AC-DC adaptor supplied withthe set and never apply an AC mains to the set directly. The AC-DC adaptor operates on an AC mains supply, the voltage is as indicated on the label of the AC-DC adaptor.a. Connect the DC plug of the AC-DC adaptor to the 15V socket of the set.b. Connect the AC-DC adaptor and it's power cord.c. Connect the power cord to an AC mains.In the event of thunderstorms or power cuts, please pill out the mains plug of the AC-DC adaptor and the aerial plug. Do not allow anything to rest upon or roll over thepower cord, and do not place the set where the power cord is subject to damage.Serviceother hazards. If the unit does not operate properly, unplug it and call your dealer.Antenna Connect the antenna cable to the connection marked Ant. (on the rear). Forbest reception, use an outdoor antenna.LocationPosition your unit so that no bright light or sunlight will shine directly on the screen. Do not expose the unit to vibration, moisture, dust or heat. Also ensure that the unit is placed in a position that allows a free flow of air. Do not cover the ventilationopenings on the back cover. You can install the unit on a wall or place it on a table-top or similar flat surface. Mounted the unit securely to eliminate the risk of injury fromthe unit falling. Contact your dealers to purchase the optional ceiling mount.CleaningUnplug the unit before cleaning the face or the LCD Screen. Dust the unit by wiping the screen and cabinet with a soft, clean cloth. If the screen requires additional cleaninguse a clean, damp cloth. Do not use liquid or aerosol cleaners.Non-active pixelsOccasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red.Please note that this does not affect the performance of your product.RISK OF ELECTRIC SHOCKDO NOT OPENWARNING
Download:
Mirror Download [FCC.gov]
Document ID468061
Application IDkfUFA8bxx+H/Q54jergyLQ==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize25.16kB (314459 bits)
Date Submitted2004-09-13 00:00:00
Date Available2004-09-10 00:00:00
Creation Date2003-06-10 06:32:15
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2004-06-25 15:20:04
Document TitleUser manual
FCC ID Filing: PLLLT2627A01

Navigation menu