3Dconnexion SMW SpaceMouse Wireless User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2316315
Application ID	k7bhY7WYxZQDgnheurB6Vw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.47kB (205844 bits)
Date Submitted	2014-07-04 00:00:00
Date Available	2014-07-04 00:00:00
Creation Date	2017-10-22 03:09:44
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-22 03:09:44
Document Title	Microsoft Word - 说明书.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

SpaceMouse Wireless
®
Important Information
Guidelines for Safe and Efficient Use
1.Do not attempt to disassemble this product unless it is for end-of-life disposal.
2.Do not expose your product to liquid, humidity, or moisture.
3.Do not operate your product when the temperature is outside the specified operation
range of 0°C (32°F)
to 40°C (104°F).
Battery Warning!
This product has a non-user-serviceable battery. Please do not attempt to change the
battery yourself.
Instead, contact 3Dconnexion Technical Support for repair or replacement
information.
Risk of explosion or personal injury if batteries are exposed to conducting materials,
liquid, fire, or heat.
Dispose of spent or damaged device including batteries according to local laws.
Wireless Product
Hereby, 3Dconnexion declares that this radio-frequency product is in compliance with
the essential
requirements and other relevant provisions of CE (R&TTE Directive 1999/5/EC). The
Declaration of
Conformity (CE Doc) can be retrieved from www.3dconnexion.com/compliance.
Environment and Disposal
This product is compliant to RoHS Directive 2002/95/EC, WEEE Directive
2002/96/EC, Packaging and
Packaging Waste Directive 94/62/EC, and Battery Directive 2006/66/EC for
environment conformity.
Compliance Marks
This product is compliant to the following compliance marks:
FCC ID:2AAHQ-SMW
UL Control No:4RX3
KC ID: MSIP-RRM-R2P-SMW
Changes or modifications not expressly approved by the responsible party for
compliance could void
the user’s authority to operate the equipment.
Please visit www.3dconnexion.com/compliance for additional compliance
information.
Warranty Information
This product comes with a 2-year limited hardware warranty.
Please refer to www.3dconnexion.com/warranty for further information.
Technical Support
Contact information can be found on the web at www.3dconnexion.com/support.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radiofrequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
FCC Caution
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
FCC Warning
This equipment has been tested and found to comply with the regulations for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received including interference that may
cause undesired operation.
1 Purpose
This document lists the product specification of 3Dconnexion SpaceNavigator (project name is
Juno). The purpose is to give a high level functional description of the device and to provide an
overview of electrical as well as mechanical properties. Furthermore this document outlines
test conditions to ensure sustaining quality, reliability and specification conformity.
This document covers SpaceNavigator with new sensor technology KILI, for SpaceNavigator
with Everest technology refer to GPS-3DX-400007.
2 Product Description
2.1
General
3Dconnexion SpaceNavigator is a USB-based 3D mouse aimed at designers, modelers,
animators and graphic artists.
SpaceNavigator is designed for use with either right or left hand in addition to the common
mouse. With one hand on the Navigator and the other hand on the mouse, performance of 3D
applications can be increased considerably. SpaceNavigator enables the user to pan, zoom
and rotate 3D-models simultaneously, while at the same time editing can be done with the
mouse. In addition to that, the product comes with 2 buttons which provide quick access to
frequently used commands.
2.2
Description
Controller
Button 2
Cap
Button 1
Base
Figure 1: SpaceNavigator
Figure 1 shows a picture of SpaceNavigator. The product consists primarily of a Controller Cap,
which contains a 6 degrees-of-freedom optical sensor. Six blue LEDs under the Cap provide
an appealing optical design. Furthermore, two buttons are integrated in the base and provide
quick access to important commands. All two buttons are freely programmable.
The Controller Cap can be moved in 6 degrees of freedom: Horizontal shift in x-direction and
z-direction, vertical shift in y-direction, rotational tilt around x-axis and z-axis, plus twist around
y-axis. In the same way the user moves the Cap of SpaceNavigator, the model moves on the
screen. Thus, panning, zooming and rotation can be done simultaneously.
The usage of the Controller Cap can be described as follows:
Horizontal movement in x-direction:

Move the Cap straight right parallel to the desk to pan the model towards the right.

Move the Cap straight left parallel to the desk to pan the model towards the left.
Vertical movement in y-direction:

Pull the Cap up away from desk to pan the model upwards.

Push the Cap down to desk to pan the model downwards.
Horizontal movement in z-direction:

Move the Cap straight away from you parallel to desk to zoom out on the model.

Move the Cap straight towards you parallel to desk to zoom in on the model.
Turning around y-axis:

Twist the Cap clockwise or counterclockwise to rotate the model correspondingly.
Rotational tilt around x- or z-axis:

Tilt the Cap around x- or z-axis to rotate the model around the corresponding axis.
To prevent the 3D mouse from sliding away while handling it, the base of SpaceNavigator is
made of stainless steel and equipped with a non-slid rubber food.
When the PC enters sleep mode or the driver is shut down, SpaceNavigator turns off its
illumination.
2.3
Compatibility
SpaceNavigator is compatible with the following platforms:

Intel Pentium processor based Systems, 32 and 64bit

AMD processor based Systems, 32 and 64bit

Sun UltraSPARC based systems

IBM RS6000 based systems

HP PA RISC based systems
Additional requirements: 50 Megabytes free disk space for driver and plug-in installation, a
CD-ROM device, a free USB 1.1 or 2.0 port. Serial-to-USB adapter is not supported. The
driver supports only one device per system.
The following operating systems are supported:

Windows Vista

Windows 2000 SP4

Windows XP SP2

IBM AIX 5.2

HP UX 11.0 and higher

Sun Solaris 8 and higher

SuSe Linux 9.3 and higher

Red Hat Enterprise Linux 4 (Kernel 2.6.8 and higher)
SpaceNavigator supports the following Applications:
Over 100 applications are supported, including all the leading 3D CAD/CAM/CAE, Animation,
Modeling, Digital Design and Office Productivity applications. Some examples are listed
below:

AutoCAD

Autodesk Inventor

Autodesk Architectural Desktop

Autodesk 3ds Max

CATIA

Pro/ENGINEER

Solid Edge

SolidWorks

Alias (Autodesk) Maya

SOFTIMAGE|XSI

UGS NX

Newtek Lightwave (Future Date)

Autodesk Revit (Future Date)

Dassault 3DXML

UGS Teamcenter

PTC Product View

Autodesk DWF (Future Release)

eDrawings

Actify Spinfire

Adobe Acrobat

Adobe Photoshop

Google Earth

Google SketchUp
Quickstart guide

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : Administrator
Create Date                     : 2013:09:13 15:37:21+08:00
Modify Date                     : 2013:09:17 10:14:15-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - 说明书.doc
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2013:09:17 10:14:15-07:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:b044644f-aef0-4e5a-af14-8c3e88164296
Instance ID                     : uuid:c7ad3301-7b39-4bd4-a771-3ea3ee0972fe
Page Count                      : 6

EXIF Metadata provided by EXIF.tools