3M Cogent ACD100H Mini-Gate User Manual

3M Cogent, Inc. Mini-Gate Users Manual

Users Manual

3M 1. MCogeCOperatioMainInterfacCompareper3modes:1) 2) 3) ent201CogentonalInstrcersonalinformPrint:CompCard+Print:Card+pin+P113MTtMini‐Modructionmationinthisparisonbyfin:ComparisonPrint:ComparTM Co‐Gateel:ACDpage.ngerprintbycardandrisonbycardogent UserM100HfingerprintandfingerprMiniManuaintandpassw-Gatealword1e 
3M2. MCogePMenuInterfaent201CutCardcloseace113MTCardandfingetotheCardFingerprTM CogerprintComReadingarearintComparisogent parisonmodea,andtheninsonmodeMinienputfingerpri-Gateint2e 
3M3. MCoge1) 2) 3) 4) Setting1) 2) ent201PAdministratScreen,SouSetting:OpAbout:ProdOperationMIn/Out:S113MTress”Menu”,tor:Setupanund:SetuptierationModeductinformatSeMode:SetupSetupinterneTM CoandTransfernadministratme,volume,e,In/Out,SentionettingInterfapcomparisonetogent rmaintomenoruser.backlightannsor,SystemcemodeMininundbackgroun-Gatedtheme.3e 
3M3.1O3.2 MCoge3) 4) OperationMoOperationMSensorent201Sensor:SSystem:SeodeMode:SetupcSe113MTSetupsensoretupsynchrocomparisonmIn/Oensor:setupTM Cormode.onizationandmode,3modut:setupintpSensormodogent initial.es:Print、Caernete,2modesMiniard+Print、Ca:-Gateard+Pin+Prin4e t
3M3.3 MCoge1)2)Io\Out3.3.1IpseChoose‘No3.3.2Seca1. Eent201) SpeedPri) QualityPretupotUseDHCP’arSetupEUTConnetio113MTorityriorityandfollowinnConnettoTM Constructionstoointernet‐>Oogent osetupIP,SOpenupSecaMiniSubnetMaskrSetuponPC-Gate,Gateway,C5e Port
3MMCoge2. Uent201Userdistribut113MTion:TransmTM Comitfingerprintogent tdatatoEUT.MiniBesureitis-GatePrintMode.6e 
3MMCoge3. Sent201Setupcompa113MTUsrisonmodebTM CoserdistributiobySecarSetupogent onmodepMini-Gate7e 
3MMCogeent201113MTTM Coogent Mini-Gate8e 
3M MCoge4. C‘CTechnicaent201CarddistributCard+Print’oaldatash113MTionwriteperor‘Card+Pin+PeetTM CorsonalinformPrint’mode.ogent ationintoHIMiniDCard.Be-Gatesureitis9e 
3M Cogent 2011                    1                             Data Issued  Product Use         Key Standard Feature & Functionality                     May 12, 2011  Cogent’s MiniBio-Gate offers a complete range of highly sophisticated, accurate, and customizable biometric physical access control terminal that support a variety of environments for which access security is needed   MiniBio-Gate is so-called for portable and housed in rugged plastic casing, provide contactless card, pin combination and fingerprint identification as access ways.   MiniBio-Gate is a fingerprint access device that enhances the security systems of physical access control. Provide with data network interfaces, a keypad and a graphic display screen. People using this device are guided through the authentication or identification process with friendly messages also be used standalone to control the access to a given entry. .   Powered by Marvell PXA310-B1 806 MHz Processor   128 MB DDR/ 128MB Flash for Memory     Support pin combination and fingerprint and contactless card as access ways.   Provides the highest level of performance and accuracy available.  Customizable Wiegand Setup  SecurSetup Administration Software   Perfect HID or SCM Reader for users   Support broadband connectivity through Ethernet        3MTM Cogent Mini-Gate
3M Cogent 2011                    2                              Technical Specifications  General Characteristics                                   CPU: Marvell PXA310-B1 806 MHz processor     Memory: 128 MB DDR / 128MB Flash   Expansion Memory: Micro SD (2GB or higher, internal)   Display: 1.77 inches TFT Color LCD     Indication LED: 3 LED   Keypad: 3*5 keys   Audio: Speaker and Microphone   PC interface: USB2.0   Output Relay: Available   Wiegand I/O: Input/output (4 TTL I/O), Programmable Up To 128 bits   Power: 12V DC/P.O.E optional   Current: 230mA @ 12V Standby / 450mA @ 12V Operational   Operating Temperature: 0 ~ 50˚ C   Storage temperature: 0 ~ 60˚ C   Optical Sensor: CSD100 (500DPI):0.71 * 0.58 inches (18 * 14.6 mm) 352x288 pixels     Enrollment Method: Single Finger, Multiple Enrollments   Extraction & Identification Time: ~ 1.5 seconds for 1 : 1   FRR: FRR 0.1% - 0.001%   FAR: FAR 0.01% - 0.0001%   Security Level: Configurable   Allowable Finger Rotation: +/- 15 degree  3MTM Cogent Mini-Gate
3M Cogent 2011                    3                             RF Card Reader    Network Interface    Software  Dimensions      Contact 3M Cogent                          SCM Reader: Mifare / PIV Card, ISO14443A Compliant  HID Reader: iCLASS / Mifare / PIV card, ISO14443A Compliant    Ethernet: 10/100M bps, TCP/IP  RS485: Available   Operating System: WinCE 6.0 Core or Linux   Length: 180mm   Width: 60mm  Depth: 42mm   www.cogentsystems.com   Phone: +86 755-86013579  Fax: 0755-86013575   Shenzhen Office: 1706 Fiyta Hi-tech Building, 17th Floor Gaoxinnanyi Avenue Southern District of Hi-tech Park Nanshan District, Shenzhen, Guangdong, China 3MTM Cogent Mini-Gate
 FCC INFORMATION  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.  This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu