3M Residential Monitoring FDU-800 Fall Detection Unit User Manual ElmoTech Ltd

3M Residential Monitoring, Inc. Fall Detection Unit ElmoTech Ltd

User Manual

Fall Detection Unit
USER MANUAL
February 2005
HomeFree Systems Ltd Pendant (Panic Button) User Manual
1
Table of Contents
1. Fall Detection Unit Operational Instructions........................3
1.1. Connecting the Fall Detection Unit ...........................................4
1.2. Activating / Deactivating the Fall Detection Unit .....................4
1.2.1. Setting the Fall Alarm Volume..................................................5
1.2.2. Setting the Fall Alarm Delay .....................................................5
1.3. Initiating a Fall Alarm................................................................5
1.3.1. Bypassing the Fall Alarm ..........................................................6
2. FCC Notices..............................................................................7
HomeFree Systems Ltd Pendant (Panic Button) User Manual
2
HomeFree Systems Ltd Pendant (Panic Button) User Manual
1. Fall Detection Unit Operational
Instructions
The HomeFree system was designed to monitor special needs and
Dementia individuals in the care center environment. The Fall
Detection Unit is one of the many unique elements of this system.
The Fall Detection Unit is a small, battery operated device, connected
to a chair or bed monitoring mat, that can be used to notify care center
staff members whenever the resident gets out of the chair or bed. The
Fall Detection Unit is positioned on the chair or at the bedside. The
Fall Detection Unit is not for use outside the monitored area.
Mat Connection
Jack
Alarm Reset / B
y
pass
Button
Alarm Volume
Panel
LED Indicator
Alert Delay Panel
3
HomeFree Systems Ltd Pendant (Panic Button) User Manual
4
1.1. Connecting the Fall Detection Unit
Plug the chair / bed mat into the mat connection jack, ensuring that the
cable between the mat and the Fall Detection Unit can move freely and
is clear of any moving parts. Place the chair / bed mat into its required
position (refer to the placement instructions for the appropriate chair /
bed mat). Place the Fall Detection Unit on the chair or at the bedside.
1.2. Activating / Deactivating the Fall
Detection Unit
Insert the batteries (battery type) in order to activate the Fall Detection
Unit. Loosen the screw located on the back lower panel of the Fall
Detection Unit and gently remove the cover. Insert the required
batteries into the battery holder. The LED indicator illuminates and a
single beeping sound is heard. Gently replace the cover and tighten the
screw holding the back lower panel.
ONCE IN ACTIVE MODE, THE FALL ALERT UNIT AUTOMATICALLY
SENDS A TRANSMISSION (EVERY 18-22 SECONDS – NON PERIODIC
TRANSMISSIONS) INDICATING THE CURRENT BATTERY STATUS AND
CURRENT LOCATION INFORMATION. THIS STATUS MESSAGE IS SENT AS
LONG AS THE FALL DETECTION UNIT IS ACTIVATED.
To deactivate the Fall Detection Unit, simply remove the batteries from
the unit.
HomeFree Systems Ltd Pendant (Panic Button) User Manual
5
1.2.1. Setting the Fall Alarm Volume
The level of the audible fall alarm depends on the level defined on the
Alarm Volume panel. Holding the Fall Alert Unit tightly, press the
Alarm button until the desired level is selected. The alarm level options
are; silent, low or loud. The illuminated LED indicates the alarm level
selected.
1.2.2. Setting the Fall Alarm Delay
The delay time of the audible fall alarm depends on the level defined on
the Alarm Delay panel. Holding the Fall Alert Unit tightly, press the
Delay button until the desired level is selected. The delay level options
are; 3-second delay (non-illuminated LED) or 5-second delay
(illuminated LED). The LED status indicates the delay level selected.
1.3. Initiating a Fall Alarm
The Fall Detection Unit begins to monitor for falls after the resident sits
or lies on the chair / bed mat for more than 15 consecutive-seconds. If
the resident gets up from the chair or bed once the unit has gone into
monitoring mode, an audible fall alarm is activated.
ONCE IN ALARM MODE, THE FALL DETECTION UNIT SENDS AN ALARM
TRANSMISSION (EVERY 18-22 SECONDS – NON PERIODIC
TRANSMISSIONS) TO THE MONITORING STATION. THIS MESSAGE IS
SENT UNTIL THE FALL ALARM IS RESET.
HomeFree Systems Ltd Pendant (Panic Button) User Manual
6
To reset the fall alarm, hold the Fall Detection Unit tightly and press the
Reset button for approximately 5 seconds. The audible alarm is
deactivated. The Fall Detection Unit will continue monitoring once
there is pressure on the chair / bed mat for more than 15 consecutive
seconds.
1.3.1. Bypassing the Fall Alarm
Holding the Fall Detection Unit tightly, press the Reset button for
approximately 5 seconds. The fall monitoring is deactivated for
approximately 30 seconds. The resident can now get up from the chair
or bed without initiating and alarm.
HomeFree Systems Ltd Pendant (Panic Button) User Manual
7
2. FCC Notices
This note is applicable to the American FDU-800
NOTE
The FDU-800 complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
This device has been tested and found to comply with the limits
of the Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
device generates, uses and can radiate radio frequency energy
and, if installed and used in accordance with the instruction,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this device does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to correct the interference by one or more of the
following measures
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the
receiver.
HomeFree Systems Ltd Pendant (Panic Button) User Manual
8
• Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Any changes or modifications not expressly approved by the
grantee of this device could void the user’s authority to operate
the equipment.
For Customer Support contact:
Home Free Systems Inc.
Wireless Tele home Care Solutions
6629 West Mill Road
Milwaukee, WI 53218
USA
Toll Free 1-800-606-0661
Fax +1-414-358-8100
Web: http://www.homefreesys.com

Navigation menu