3M Residential Monitoring PB-830-2 Call Button and Pull Tag User Manual
3M Residential Monitoring, Inc. Call Button and Pull Tag Users Manual
Users Manual
Part Number - 350109601 Revision – A00-000
Wireless Resident Monitoring
Solutions
Emergency Call Button Operational
Instructions
The HomeFree system was designed to monitor special needs and Dementia
individuals in the care center environment. The Emergency Call Button is
one of the many unique elements of this system.
The Emergency Call Button is a small, lightweight push button unit worn by
the resident / nurse that alerts care center staff members whenever the
resident / nurse activates an emergency call alert. The Emergency Call
Button can be worn as a pendent, watch style or clip-on. The Emergency
Call Button is not for use outside the monitored area.
Activating the Emergency Call Button:
The Emergency Call Button is turned off by the manufacturer before
shipment and must be activated before use. To activate, hold the Emergency
Call Button firmly in your hand and press the panic button continuously for
2 seconds. The LED indicator flashes indicating that the Emergency Call
Button is in active mode.
Panic
Button
LED Indicator
Part Number - 350109601 Revision – A00-000
Once in active mode, the Emergency Call Button sends a status message to
the monitoring station (every 60 minutes) indicating the current battery
status as well as the location of the Emergency Call Button. This status
message is sent until the Emergency Call Button is deactivated.
Activating a Panic Alert
Press the panic button. The LED indicator flashes indicating that the
Emergency Call Button is in panic alert mode.
Once in panic alert mode, the Emergency Call Button sends a panic alert
message (every 20 seconds) to the monitoring station. This message is sent
until the panic alert is deactivated.
Deactivating a Panic Alert
Press the panic button 6 times in quick succession (within 5 seconds). The
LED indicator lights up for 3 seconds indicating that the panic alert has been
deactivated.
Even though the panic alert has been deactivated, the Emergency Call
Button is still in active mode. Therefore, the Emergency Call Button still
sends a status message to the monitoring station. This status message is sent
until the Emergency Call Button is deactivated.
Deactivating the Emergency Call Button
Holding the Emergency Call Button firmly in your hand, press the panic
button continuously for 10 seconds. The LED indicator lights up for 3
seconds. During this 3-second period, press the panic button 2 times in
succession. The Emergency Call Button is now in deactivated mode (turned
off).
Part Number - 350109601 Revision – A00-000
FCC Notices
Note: The following is applicable only to the 433MHz version of this product.
FCC ID: QUX-PB-830-2
FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 15 STATEMENT
The equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna, 2. Increase the separation between the
equipment and the receiver, 3. Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected, 4. Consult the dealer or an
experienced radio/TV technician for hel
p.
Caution
Any changes or modifications not expressly approved by the grantee of this
device could void the user's authority to operate the equipment.
In case of any problems please contact your local service
provider:
HomeFree Systems Inc.
Phone: 1-800-606-0661
Outside US call: +927-3-7671900
E-mail:contactusa@homefreesys.com
Web Site: www.homfreesys.com