3Si Security Systems AT140901A Asset Tracking and Alert Device User Manual 3SI Regulatory Notices AT140901US 2014 12 11

3Si Security Systems Inc. Asset Tracking and Alert Device 3SI Regulatory Notices AT140901US 2014 12 11

user guide

FCC ID: Q6KAT140901A Model: AT140901USa) NOTICE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.b) NOTICE: Changes or modifications made to this equipment not expressly approved by 3SI Security System, Inc may void the FCC authorization to operate this equipment.INDUSTRY CANADA ID: 5043A-AT140901AModel: AT140901USa.) NOTICE: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : •l'appareil ne doit pas produire de brouillageImportant Safety InformationWarning: Use of a non-3SI supplied battery may present a risk of fire, explosion, leakage, or other hazard.• Don’t disassemble, crush, puncture, shred, or otherwise attempt to change the form of your battery.• Don’t use tools, sharp objects, or excessive force to insert or remove the battery as this can damage the battery.• Don’t let the device or battery come in contact with liquids. Liquids can get into the device’s circuits, leading to corrosion• Use with an already tested/certified micro-USB wall charger.Regulatory Noticesoperate this equipment.c) Radiofrequency radiation exposure Information: This equipment complies with FCC radiation exposure limits set forth foran uncontrolled environment. This equipment should be installed andoperated with minimum distance of 20 cm between the radiator andyour body. This transmitter must not be co-located or operating inconjunction with any other (than provided by 3SI) antenna ortransmitter.d) NOTICE:This transmitter is authorized by rule under the Low Power Radio Service(47 CFR part 95) and must not cause harmful interference to TV receptionor United States Navy SPASUR installations. You do not need an FCClicense to operate this transmitter. This transmitter may only be used toprovide: auditory assistance to persons with disabilities, persons whorequire language translation, or persons in educational settings; healthcare services to the ill; law enforcement tracking services underagreement with a law enforcement agency; or automated maritimetelecommunications system (AMTS) network control communications.Two-way voice communications and all other types of uses notmentioned above are expressly prohibited.•l'appareil ne doit pas produire de brouillageet •l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.b.) NOTICE: Changes or modifications made to this equipment not expressly approved by 3SI Security System, Inc may void the IC authorization to operate this equipment.Toute modification non autorisée par 3SI Security Systems,Incapportée à cet équipement pourrait entrainer l'annulation de l'autorisation de la IC d'opérer cet équipement.c.) Radio frequency radiation exposure Information: This equipment complies with IC radiation exposure limits setforth for an uncontrolled environment. This equipment should be installedand operated with minimum distance of 20 cm between the radiator andyour body. This transmitter must not be co-located or operating inconjunction with any other antenna or transmitter.Cet équipement est conforme aux exigences d’exposition auxradiofréquences de la IC pour un environnement non contrôlé. Il devraitêtre installé et opéré d'une distance minimum de 20 cm entre le radiateur etvotre corps. Le transmetteur ne doit pas être situé ou opéré en conjonctionavec une autre antenne ou transmetteur.d.) Antenna StatementUnder Industry Canada regulations, this radio transmitter may only operateusing an antenna of a type and maximum (or lesser) gain approved for thetransmitter by Industry Canada. To reduce potential radio interference toother users, the antenna type and its gain should be so chosen that theequivalent isotropically radiated power (e.i.r.p.) is not more than thatnecessary for successful communication.Conformément à la réglementation d'Industrie Canada, le présent émetteurradio peut fonctionner avec une antenne d'un type et d'un gain maximal (ouinférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but deréduire les risques de brouillage radioélectrique à l'intention des autresutilisateurs, il faut choisir le type d'antenne et son gain de sorte que lapuissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensiténécessaire à l'établissement d'une communication satisfaisante.Normas Oficiales MexicanasModel: AT140901USNOTICE: This device complies with the NOM safety standards:•NOM-001-SCFI-1993•NOM-003-SCFI-2000•NOM-016-SCFI-1993•NOM-019-SCFI-20002014-12-11 AT140901REG

Navigation menu