3e Technologies 525-V21 WiLAN Mini-PCI Module User Manual INSTRUCTIONS FOR

Download:
Mirror Download [FCC.gov]
Document ID	1222007
Application ID	7LwJXsKzA7gMju8ON0ySgw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.55kB (19433 bits)
Date Submitted	2010-01-04 00:00:00
Date Available	2010-01-06 00:00:00
Creation Date	2009-12-14 17:07:08
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2009-12-14 17:07:42
Document Title	INSTRUCTIONS FOR
Document Creator	Acrobat PDFMaker 6.0 for Word
Document Author:	Rich Brazda

INSTRUCTIONS FOR
USE OF QVT-525-V21
RF SAFETY INFORMATION
To comply with FCC RF exposure compliance requirements, the
antennas used with the 3e-525 family products must be installed with a minimum
separation distance of 20cm, 35cm for any approved directional antenna, from all
persons and must not be co-located or operated in conjunction with any other
antenna or transmitter. Installation should be accomplished using the authorized
cables and / or connectors provided with the device or available from the
manufacturer / distributor for use with this device. Changes or modifications not
expressly approved by the manufacturer or party responsible for this FCC
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 and part 90 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance to the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct
the interference at their own expense.
Installation should be accomplished using the authorized cables and / or
connectors provided with the device or available from the manufacturer /
distributor for use with this device. Changes or modifications not expressly
approved by the manufacturer or party responsible for this FCC compliance could
void the user’s authority to operate the equipment.
TUNE-UP PROCEDURE
1. Configure the radio module for operation in the 2.4 GHz, 4.9 GHz, or 5.8 GHz
band using the radio configuration software. Note: only one band is
available at a time.
2. Configure the power setting for Auto using the radio configuration
software.
3. Measure the power output during transmit.
4. Verify that the power reading is between 18 dBm and 24 dBm.
LABELING INSTRUCTIONS
1. The radio module used for the 3e-525 Family products is the Wistron
DCMA-82 module (3eTI Part Number 5441400001). This single device covers
each the 2.4GHz, 4.9GHz, and 5.8GHz operational modes.
2. Place the label with the QVT-525-V21 label designated for use with the
DCMA-82 radio (3eTI Part Number 31000971-002 – LABEL,FCC,QVT-525V21,DCMA-82).
3. The DCMA-82 module with the label from step 2 (above) must be installed
per 3eTI manufacturing instructions.
4. Add an FCC label designated for use with the enclosure (3eTI Part Number
31000971-001 – LBL,FCC,QVT-525-V21,ENCLOSURE) in place of the FCC
label on the outside of the product enclosure. Remove any existing FCC
label on this enclosure prior to installing the new label. Note: the correct
location for installation of this label is called out in the Manufacturing
Assembly Instructions for the product.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 2
Language                        : EN-US
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:8dedfed6-a24e-4f43-bde8-bc338b16a6ab
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Company                         : Transcrypt
Source Modified                 : D:20091214230658
Headline                        : 
Create Date                     : 2009:12:14 17:07:08-06:00
Creator Tool                    : Acrobat PDFMaker 6.0 for Word
Modify Date                     : 2009:12:14 17:07:42-06:00
Metadata Date                   : 2009:12:14 17:07:42-06:00
Document ID                     : uuid:656ad89b-17de-4fd9-a27f-e7eb715a18c4
Version ID                      : 2
Format                          : application/pdf
Title                           : INSTRUCTIONS FOR
Creator                         : Rich Brazda
Subject                         : 
Tagged PDF                      : Yes
Author                          : Rich Brazda

EXIF Metadata provided by EXIF.tools