4 Sizzle ST-208DHF-G Music Cooler with Bluetooth Speakers User Manual Instruction Manual of Bluetooth Cooler Case
4 Sizzle, Inc. Music Cooler with Bluetooth Speakers Instruction Manual of Bluetooth Cooler Case
4 Sizzle >
user manual
Music Cooler with BT Speakers
FCC ID: 2AFN5-ST-208DHF-G
A.C. Power Supply
Blue tooth playing mode
1. Plug the A.C. adaptor into the slot marked Line in /D.C. 5V in the silver BT panel mounted on the
top of rolling cooler.
2. Switch the ON-OFF shift into ON position.
3. Press down the MODE button to shift this function key from Bluetooth. Radio and Audio Input in
order and set at Bluetooth mode.
4. Connect the cell phone with this BT silver panel after seeing Sweetly which is its identification code.
5. Play music downloaded from cell phone.
USB playing mode
1. Plug the A.C. adaptor into the slot marked Line in /D.C. 5V in the silver BT panel mounted on the
top of rolling cooler.
2. Switch the ON-OFF shift into ON position.
3. Press down the MODE button to shift this function key from Bluetooth. Radio and Audio Input in
order and set at USB Input mode.
4. Insert USB memory stick into the slot marked USB.
5. Music will be played automatically.
D.C. Power Supply
Same as playing under A.C. power supply condition regardless of Blue tooth playing or USB playing
mode in case of no A.C. power.
FM Broadcast Receiver. It is used to receive the FM radio signal.
SD/MMC is used to play audio files stored on the memory card .
The Responsible Party Information as follow:
Company Name
4 Sizzle, Inc.
Address
PO Box 4470, stateline NV 89449
Telephone
480-557-0291
Website
www.4sizzle.com
BONUS: The USB slot also acts as an emergency charger for your phone
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.