User Manual
Helmet Speaker User Manual Thank you (or purchasmg our product TRVHSOOW please read this manual caremHy before using! NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation, This equipment generates uses and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation it this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more ofthe follovving measures: , Reorient or relocate the receiving antenna. , increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the ICCCIVCY l5 COHHCCth. - Jonsult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies With Part 15 ofthe FCC Rules, Operation is subject to the followmg two conditions: (1) this device may not cause harmful interference. and (2) this device must accept any interference received, including interference that may cause undesired operation. 1. Important Information PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USING KEEP INSTRUCTIONS FOR FUTURE REFERENCE IMPORTANT SAFETY INSTRUCTION 1. Do not use speaker near water. 2. Clean only with a dry cloth. Disconnect power cord from outlet before cleaning. 3. Only use original power cord supplied with the speaker. 4. Do not place near heat sources including radiators, ovens, etc. 5. Do not use if power cord or speaker has been damaged. 6. Do not make any modifications to speaker. 7. Carefully arrange power cord so it can not be tripped over or pulled by children. 2. Package Manuat Speaker um| Power Cord 3. Button Functions 1tSkip Song (tap button once) / Volume Up (hold button down) 2tPrevious Song (tap button once) / Volume down (hold button down) 3tPlay/Pause 4. Interface Description 1).Power switch ON/OFF 2).Power Cord (input) Charging instructions: Insert power cord to charge. Red light indicates that unit is charging. Red light turns off when fully charged. Do not charge for more than 4 hours even if red light stays on. Unplug power cord once charging is complete. Play time More than 4 hours at 80% volume. Charging 5.Switch Operation Instruction 1).Turn on l—El OFF/ON 2).Turn off DC OFF/ON 6.Pairing Turn on power then search for “helmet speaker” on your device. If your device requests a pairing code, enter “0000". This speaker only supports one device pairing at a time so disconnect your 0 ing to pair. devices before attemp 7. Specification her Function Specification Distance 6.0M at Max Frequency Range 2.4GHZ-2.48GHZ Power Supply Built-in Chargeable Li-ion Battery Play time more than 4hrs at 80% volume RMS 30W Driver Impedance 80 Frequency Response 90HZ-20KHZ Size 32.5cm‘26cm‘24cm Weight 20009 Working Temperature 10 (1 ~40 C
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Warning : Info object (151 0 obj) not found at 393449EXIF Metadata provided by EXIF.tools