4MOD Technology 10301001 Luminion Hemis User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3455976
Application ID	m6gudaZVjoHGwxaZP//NWg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.79kB (72318 bits)
Date Submitted	2017-07-08 00:00:00
Date Available	2017-07-08 00:00:00
Creation Date	2017-07-07 22:58:05
Producing Software	Foxit PhantomPDF Printer Version 6.1.0.0923
Document Lastmod	2017-07-07 22:58:05
Document Title	User manual

Luminion HEMIS PRODUCT – USER MANUAL
Model name: MAT010301001
FCC ID: R5D10301001
IC: 22682–10301001
Before settting up Luminion HEMIS you need to download the MyHemis
application from Ubiant (available on Google Play store or Apple AppStore) in your
smartphone. You also need to have an installed and working HEMIS Gateway at your
home.
While MyHemis application and HEMIS Gateway are available, you can add
Luminion HEMIS product to your account by either scanning the product NFC tag, or
scanning the QrCode on the bottom (if NFC is not supported by your phone). Then
you need to power up Luminion HEMIS by using the provided adapter in the box.
Once the setup routine is finished, the Luminion will be connected to your
Hemis gateway. You can see that the Luminion will blink purple to show that
everything is okay.
Your Luminion is now running. The different lights on Lumition Hemis will
turn on according to your setting in the smartphone application.
Federal Communications Commission (FCC) Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generate, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
RF exposure warning
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
The device complies with the RF specifications when the device is used near your at a
distance of 20.0 cm from your body. Keep your device 20.0 cm away from your body to
meet the requirement earlier mentioned.
Industry Canada (IC)
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Cet appareil est conforme à la norme RSS d'Industrie Canada. Son
fonctionnementestsujet aux deux conditions suivantes:
(1) ledispositif ne doit pas produire de brouillagepréjudiciable, et
(2) cedispositifdoit accepter tout brouillagereçu, y compris un brouillage susceptible
de provoquer un fonctionnementindésirable.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Déclarationd'exposition aux radiations:
Cetéquipementestconforme aux limitesd'exposition aux rayonnements IC établies
pour un environnement non contrôlé. Cetéquipementdoitêtreinstallé et utilisé avec
un minimum de 20cm de distance entre la source de rayonnement et votre corps.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 3
Author                          : 
Create Date                     : 2017:07:07 22:58:05+08:00
Creator                         : 
Modify Date                     : 2017:07:07 22:58:05+08:00
Producer                        : Foxit PhantomPDF Printer Version 6.1.0.0923
Subject                         : 
Title                           : 

EXIF Metadata provided by EXIF.tools