7 Step Technology HALO SMART WATCH User Manual DZ09
HongKong 7 Step Technology Co., Limited SMART WATCH DZ09
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3624546 |
| Application ID | UgLKSKEjm18VpJbyPSdg9g== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 306.71kB (3833855 bits) |
| Date Submitted | 2017-11-01 00:00:00 |
| Date Available | 2017-11-01 00:00:00 |
| Creation Date | 2014-11-17 18:28:50 |
| Producing Software | Corel PDF Engine Version 15.0.0.486 |
| Document Lastmod | 2017-10-27 21:53:31 |
| Document Title | 手表说明书-DZ09.cdr |
| Document Creator | CorelDRAW X5 |
| Document Author: | Administrator |
User Manual Product Name: SMART WATCH Model:HALO Manufacture: HongKong 7 Step Technology Co., Limited FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information: This SMART WATCH meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged for the head and 4.0 W/kg averaged for the wrist over one gram of tissue. Device types: SMART WATCH (FCC ID: 2ANZYHALO) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the front to mouth is 0.237W/kg and when properly worn on the Wrist is 1.708W/kg.. This device was tested for typical body-worn operations with the back of the handset kept Front to mouth is 10mm.Wrist is 0mm. To maintain compliance with FCC RF exposure requirements, use accessories that maintain Front to mouth is 10mm,Wrist is 0mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance Front to mouth is 10mm.Wrist is 0mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Administrator Create Date : 2014:11:17 18:28:50+08:00 Modify Date : 2017:10:27 21:53:31+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : Administrator Title : 手表说明书-DZ09.cdr Creator Tool : CorelDRAW X5 Metadata Date : 2017:10:27 21:53:31+08:00 Producer : Corel PDF Engine Version 15.0.0.486 Document ID : uuid:dc760053-c670-41e1-8133-c3ad472de7ef Instance ID : uuid:1f6c99a4-73fc-41e2-bcc9-9039e048f2db Page Count : 2 Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract)EXIF Metadata provided by EXIF.tools