8BITDO TECH SNFPROV2 8Bitdo SF30 Pro v2 Bluetooth GamePad User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3749744
Application ID	YvKz2CKOwJ/wiqnVftni9w==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.56kB (256968 bits)
Date Submitted	2018-02-12 00:00:00
Date Available	2018-02-26 00:00:00
Creation Date	2018-01-31 14:06:15
Document Lastmod	2018-02-12 14:00:00
Document Title	Users Manual
Document Creator	WPS Office
Document Author:	sabrina.tian

User Manual
Product name:8Bitdo SN30 Pro v2 Bluetooth GamePad
Model: 80DI SF30ProV2
Basic operation
Press START to turn on the controller
Press and hold START for 3 seconds to turn off the controller
 Press and hold START for 8 seconds to force turn off the controller
Bluetooth connection
Switch
1. Press START+Y to turn on the controller first, then press and hold PAIR for 3 seconds to
enter pairing mode. LED will，LEDs will start to rotate from left to right.
2. Go to your Switch Home Page to click on Controllers, then click on Change Grip/Order and
wait for controller to sync up. LED will become solid when connection is successful.
3. Controller will auto reconnect to your Switch with the press of START once it has been paired.
 STAR button = Switch screenshot button, Home button = Switch HOME button.
Android
1. Press START+B to turn on the controller, LED 1 will start to blink.
2. Press and hold PAIR for 3 seconds to enter pairing mode. LED will rotate from left to right.
3. Go to your Android device’s Bluetooth setting, pair with [8Bitdo SF30 Pro] or [8Bitdo SN30
Pro]. LED will become solid when connection is successful.
4. Controller will auto reconnect to your Android device with the press of START once it has
been paired.

USB Connection: connect the controller to your Android device via USB Cable after step 1.
Windows
1. Press START+X to turn on the controller, LEDs 1, 2 will start to blink.
2. Press and hold PAIR for 3 seconds to enter pairing mode. LEDs will rotate from left to right.
3. Go to your Windows device’s Bluetooth setting, pair with [8Bitdo SF30 Pro] or [8Bitdo SN30
Pro]. LED will become solid when connection is successful.
4. Controller will auto reconnect to your Windows device with the press of START once it has
been paired
 USB Connection: connect the controller to your Windows device via USB Cable after step 1.
macOS
1. Press and hold START+A for 1 second to power on the controller, LEDs 1,2,3 will start to
blink.
2. Press and hold PAIR for 3 seconds to enter pairing mode. LEDs will rotate from left to right.
3. Go to your macOS device’s Bluetooth setting, pair with [Wireless Controller]. LED will
become solid when connection is successful.
4. Controller will auto reconnect to your Windows device with the press of START once it has
been paired.
 USB Connection: connect the controller to your macOS device via USB Cable after step 1.
Turbo function
1. Hold the button you would like to set turbo functionality to and then press the STAR button to
activate turbo functionality.
2. HOME LED will blink when turbo functionality has been applied successfully.
3. All buttons with Turbo functionality activated will cause the HOME LED to blink, showing
you that Turbo functionality is active on that button.
4. To deactivate turbo function, hold the button with turbo functionality activated press the
STAR button to deactivate turbo functionality. The HOME LED will no longer blink if you
have successfully disabled turbo functionality.
 Analog sticks are not included.
 This does not apply to Switch.
Battery
Status
LED Indicator
Low battery mode
POWER LED blinks
Battery charging
POWER LED stays solid
Battery fully charged
POWER LED turns off
·Built-in 480 mAh Li-on with 16 hours of play time. ·Rechargeable
via its USB-C cable with 1 – 2 hour charging time.

Battery charging time might vary depending to the environment the controller is
exposed to.
Power Saving
·Sleep mode - 1 minute with no Bluetooth connection.
·Sleep mode - 15 minutes with Bluetooth connection but no
use. ·Press START to wake up your controller.
Support and firmware upgrade
Please visit support.8bitdo.com for further information and additional support.
FCC Statement
15.19
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
15.21
Note: The grantee is not responsible for any changes or modifications not expressly approved by
the party responsible for compliance. Such modifications could void the user’s authority to
operate the equipment.
15.105(b)
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help
RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance of 5mm between the radiator
and your body.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : sabrina.tian
Description                     : 
Title                           : 
Comments                        : 
Company                         : 
Source Modified                 : D:20180131140615+06'06'
Create Date                     : 2018:01:31 14:06:15+06:00
Creator Tool                    : WPS Office
Modify Date                     : 2018:02:12 14:00+08:00
Metadata Date                   : 2018:02:12 14:00+08:00
Keywords                        : 
Producer                        : 
Document ID                     : uuid:a14c7582-2595-4a00-b82b-2648eceead66
Instance ID                     : uuid:d78f545e-9053-4520-9fe4-5332d8fa202d
Page Count                      : 4
Author                          : sabrina.tian
Subject                         : 
Trapped                         : false

EXIF Metadata provided by EXIF.tools