A Four Tech Co GX68 2.4G RF Keyboard User Manual Usr manual

Download:
Mirror Download [FCC.gov]
Document ID	1173620
Application ID	2MVZ9rRZIc+7snfg5Uu29w==
Document Description	Usr manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.24kB (278037 bits)
Date Submitted	2009-09-23 00:00:00
Date Available	2009-09-23 00:00:00
Creation Date	2009-09-18 20:15:53
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2009-09-22 17:51:17
Document Title	Microsoft Word - 2.4G RF Wireless Keyboard Manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Jeff

2.4G RF Keyboard
User’s Guide
Model: GX-68
www.a4tech.com
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1)
THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Federal Communications Commission Requirements
The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio
communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient of relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID
THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in
Supplement C to OET65. The equipment has very low levels of RF energy that it is deemed to comply without testing of specific absorption ratio (SAR).
-1-
Knowing the keyboard
2.4GHz wireless technology Errorless 2-Way Communication Technology
The 2.4GHz RF wireless technology is fine-tuned with exclusive 1,048,576 ID-codes; it offers precise and smooth wireless
operation in active wireless environments. It allows many wireless devices to operate simultaneously in one area without interfering
in the range up to 15 meters.
Errorless 2-way communication technology features error correction capability that speeds up data transmission and increases
wireless precision. It saves valuable battery power and cost.
Specifications
RF Data Transmit Rate
Modulation Type
500k bps
GFSK
Frequency
ID Codes
2.407GHz ～2.473GHz
524,288 sets
-2-
Wireless Range
Any electrical device, such as the computer monitor, Zip drives, speakers, etc., can cause interference with the wireless keyboard. Most likely,
this will effect tracking of pointing devices or the range of the device. To make sure that your keyboard transmits and receives properly, refer to
the following instructions:
1. For optimal performance, place the receiver at least 8 inches (20 centimeters) away from
other electrical devices, such as the computer monitor, Zip drives, speakers…etc.
Keep 8 inches
2. The effective distance of wireless keyboard should be no farther than 15 meters. This will
ensure optimal communication between the keyboard and the USB receiver.
NOTE: You should always get at least a 4 meters range. If you find that your cordless device gets less than 4 meters range, please
replace the batteries with a fresh set, perform the synchronization procedure for the keyboard and test the range again. If the range is still
below 4 feet, please test your device on another system, preferably in a different environment. If you find it gets the same range on
another system, please contact us support to obtain information about a warranty replacement. However, if the range improves on
another system, then it may be an environmental variable. Use the suggestions above to resolve the environmental interference issue.
-3-
Operating Warnings: For optimal performance and RF (Radio Frequency) reception:
Avoid using the wireless keyboard on a metal desk or a desk with a metal frame can cause problems with pointing device behavior and range.
Hardware Installation
Plug receiver into USB port of your computer or notebook.
Insert the supplied battery, making sure that the positive (+) and negative (-) ends of
the battery match the polarity indicators inside the battery housing. and power will be
automatically on. Now you can use the keyboard.
-4-
Software Installation
1. Before installing the keyboard software, please uninstall any previous installed
keyboard software.
2. Insert enclosed CD to start installation.
3. Follow on-screen instructions to complete the installtion.
4. The icon
will appear on your desktop, then you have successfully installed
the software.
5. To launch the software,
double click the icon
on
your desktop or go to
Start—Programs—8 in
Right, then the icon will
appear in the taskbar at the
right corner of your screen.
-5-
Software Instructions
How to Pair the Wireless Devices
The keyboard have been preset the ID Code in the factory. But under the circumstances you lose receiver or want to use with the other receiver
in the same product series, you need to refresh the ID Code before using it.
Step 1: Right click on the icon
taskbar
in the
and select
Step 2: Press “Start Pair ID” to
refresh ID Code.
“Pair ID Program”
Step 3: Remove the keyboard batteries and insert again in 15 seconds， 6 digits of
matching code will be displayed on the menu as shown “Keyboard Pair ID OK”.
-6-
Notice: To ensure that your keyboard sends and receives perfectly, please read below instructions for your reference:
1. To avoid electromagnetic interference, place the receiver at least 8 inches (20 cm) away from other electrical devices, such as the computer, the
monitor or external storage devices.
2. The operation distance depends on the working environment and can reach to 15 meters without any interference, to get optimal performance,
please adjust the distance between keyboard and receiver according to different situations.
3. Avoid using the wireless keyboard on a metal surface. Metals such as iron, aluminum, or copper shield the radio frequency transmission and
slow down the keyboard’s response time or cause the mouse to fail temporarily.
Troubleshooting
If the keyboard are not working:
1. Check battery installation.
2. Check receiver installation.
3. Try another USB port.
-7-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2009:09:22 17:51:17+08:00
Create Date                     : 2009:09:18 20:15:53+08:00
Metadata Date                   : 2009:09:22 17:51:17+08:00
Format                          : application/pdf
Title                           : Microsoft Word - 2.4G RF Wireless Keyboard Manual.doc
Creator                         : Jeff
Document ID                     : uuid:f9e51658-6e4b-4743-b8d1-f527ca2399fc
Instance ID                     : uuid:539bcb31-32be-4e1a-b5f2-d30ddd242305
Page Count                      : 8
Author                          : Jeff

EXIF Metadata provided by EXIF.tools