A Four Tech Co RHP5 Wireless Headphone User Manual

A Four Tech Co Ltd Wireless Headphone Users Manual

Users Manual

6 CHECK AND RESET No Sound Ensure the AC adapter is fully inserted into the AC outlet and into the power connection input on the transmitter. Ensure the headphone ON/OFF switch is in its ON position. Headphone batteries may be too low. Charge batteries. Ensure the computer or other audio source is on and tuned to a channel with audio. Adjust the volume control on the headphone to turn up the volume. The connected audio/video equipment is not playinq (CD, Tape, etc.). Check the audio source. Distortion The volume of headphone is low, adjust the volume to your listening level again Ensure the stereo indicator light is on. If not, adjust the tuning control on the headphone until the indicator light “Red” is on. Headphone batteries may be too low. Charge the batteries or replace with new ones if they do not charge The headphone is too far from transmitter, move closer The input level of the audio signal is too low. Turn up the volume of the audio source equipment. FCC Caution :To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices).

Navigation menu