A O Smith Btx 100 Specification Sheet

BTX-100 to the manual c95b4613-35a4-46d0-9e31-743072dd4bd5

: A-O-Smith A-O-Smith-Btx-100-Specification-Sheet-162922 a-o-smith-btx-100-specification-sheet-162922 a-o-smith pdf

Open the PDF directly: View PDF .
Page Count: 2

Commercial Gas Water Heaters

96% THERMAL EFFICIENCY

VERSATILE POWER DIRECT-VENT

BTX-100

Page 1 of 2

AOSCG10101April 2008

The Cyclone Xi™ is a light-duty, power direct-vent, fully condensing commercial gas water

heater with an internal helical heat exchanger. This helical heat exchanger helps Cyclone Xi

achieve 96% thermal efficiency and deliver outstanding hot water output.

HELICAL INTERNAL HEAT EXCHANGER

n Completely surrounded by water in tank, provides much greater heat transfer

surface than standard straight flue tube

n Produces 96% thermal efficiency, which saves money on operating costs,

increases hot water output compared to standard-efficiency water heaters

n Minimizes standby losses by trapping heat in the tank

VERSATILE POWER DIRECT-VENT DESIGN

n Power Direct-Vent System allows up to 120 feet using PVC, CPVC, or ABS pipe. Can be

vented vertically thru-the-roof or horizontally thru-the-wall

n 2” pipe, vents up to 20 equivalent feet

n 3” pipe, vents up to 60 equivalent feet

n 4” pipe, vents up to 120 equivalent feet

n Optional concentric vent kit available

CONDENSING DESIGN

n 96% efficient condensing deign

n Equipped with condensate drain tee

HIGH OUPUT WITH SMALL FOOTPRINT

n 22” diameter, combined with 96% efficiency, 50-gallon tank and 100,000 BTU

input means Cyclone Xi can be installed in less space than a larger 75-gallon

unit, with equal or better performance

n Total height is 68-1/2” to top of unit

SIDE-MOUNTED HOT AND COLD RECIRCULATING TAPS

n Allows Cyclone Xi to be installed as part of combination space heating/water

heating applications, or any system requiring a recirculating hot water loop

n Plugs for the recirculating taps are factory installed

ADVANCED ELECTRONIC CONTROL

n Large LCD display

n Precise temperature control

n

Advanced diagnostics

PERMAGLAS® ULTRA COAT™ GLASS LINING

n A. O. Smith exclusive process provides superior protection against corrosion

n Protects all interior tank surfaces including inside and outside of helical

heat exchanger

TWO HEAVY-DUTY ANODE RODS

n Provides advanced protection against corrosion

AVAILABLE IN NATURAL GAS AND PROPANE

TOP FIRED LOW-NOX GREEN CHOICE® GAS BURNER

n “Eco-friendly” design reduces NOx emissions

and complies with Southern California and Texas requirements

FACTORY-INSTALLED TEMPERATURE AND PRESSURE RELIEF VALVE

MAXIMUM HYDROSTATIC WORKING PRESSURE: 150 PSI

CODES AND STANDARDS

n Design-certified by UL (Underwriters Laboratories) according to

ANSI Z21.10.3-CSA4.3 standards governing storage-type water heaters

n

These models meet or exceed the thermal efficiency and standby loss requirements of

ASHRAE 90.1 (current standard)

GAS-FIRED GAS-FIRED

Commercial Gas Water Heaters

96% THERMAL EFFICIENCY

VERSATILE POWER DIRECT-VENT

Page 2 of 2

AOSCG10101

THREE-YEAR LIMITED TANK WARRANTY

n For complete warranty details, consult written warranty shipped with heater or contact A. O. Smith

SPECIFICATIONS

MODEL

NUMBER

BTU

INPUT

PER

HOUR

GALLONS

OR

LITRES

TANK

SIZE

RECOVERY - GALLONS OR

LITRES PER HOUR AT

DEGREE RISE SHIPPING

WEIGHT

40°F 100°F 140°F

22°C 56°C 78°C

BTX-100 100,000 Gallons

50 291 116 83 255 lbs

Litres

189 1102 439 314 115.7 kg’s

Maximum Supply Pressure: 14 inches W.C. (3.48kPa) n Minimum Supply Pressure for Natural Gas: 3.50” (.87kPa) n Minimum Supply Pressure for Propane Gas: 8.00” (1.99kPa)

Minimum pressure must be maintained under both load and no load (dynamic and static) conditions. n Electrical Characteristics - 120V, 60Hz, Amperes <5

Approved for Canada

DIMENSIONS

BTX-100 A B C D

E

F

INCHES 68-1/2 49-1/4

22 15-3/4 3 8

CM 174 125.09 55.88 40 7.62

20.32

Top inlet and outlet: 3/4” male NPT n Side inlet and outlet: 3/4” female NPT n Gas inlet: 1/2” NPT n Available natural gas and propane

SUGGESTED SPECIFICATION

(Natural or Propane) gas water heater(s) shall be A. O. Smith Cyclone Xi model # BTX-100, with 96% thermal efciency, a storage capacity of 50 gallons, an input rating of 100,000 BTUs per hour, a

recovery rating of 116 gallons per hour at 100ºF rise and a maximum hydrostatic working pressure of 150 psi. Water heater(s) shall be of power direct-vent design, using 2”, 3” or 4” PVC pipe for

horizontal and/or vertical vent runs. Water heater(s) shall have: 1: Seamless, glass lined steel tank construction and a spiral-shaped heat exchanger placed entirely inside the tank, which shall be glass

lined on the ue gas side to protect against acidic condensate. 2: Advanced electronic control w/ LCD display and actual diagnotic. 3: A 3-year limited warranty against tank leaks. Water heater(s) shall

meet or exceed ASHRAE 90.1 (current standard), and be design-certied by UL (Underwriters Laboratories) according to ANSI Z21.10.3-CSA4.3 standards governing storage tank water heaters.

www.hotwater.com

For Technical Information and Automated Fax Service, call 800-527-1953. A.O. Smith Corporation reserves the right to make product changes or improvements without prior notice.

OPTIONAL CONCENTRIC VENT KIT

3” DIAMETER

PVC VENT/EXHAUST

3” DIAMETER PVC

INTAKE/COMBUSTION AIR

1 1/2” *21 1/8”

4 1/2” DIAMETER

1 3/16 ”

**39”