A and H Design Group BV-011RX Wireless remote control vibrator (Cinco Anal Beads) User Manual
A&H; Design Group, Ltd. Wireless remote control vibrator (Cinco Anal Beads)
User Manual
CINCO ANAL BEADS
USER GUIDE
2 3
OVERVIEW
b-VibeTM products are made with silky smooth, body-
safe silicone. Our products are phthalate-free and
latex-free.
The easy to use interface allows users to easily reach
their desired stimulation and intensity level. Get ready
for sensual satisfaction and exploration that will have
you craving for more.
b-VibeTM Cinco Anal Beads
ENGLISH
4 5
Easily
Insertable Tip
Powerful
Motor 3
Powerful
Motor 1
Powerful
Motor 2
Base
Control
Button Magnetic
Charging
Contact
LED
Indicator
CINCO ANAL BEADS WIRELESS REMOTE CONTROL
Decrease
Intensity
Power
Button
Vibration
Function
Button
Increase
Intensity
7
GETTING STARTED
1. Before first use, charge your
anal beads for approximately 2
hours. The USB charging cable
can be plugged into any USB port
or USB/AC power adapter (not
included).
• Flashing Light = Charging
• Solid Light = Fully charged
• Rapid Flashing Light = Low
battery. Charge is needed
2. Wash your anal beads with
soap and water or toy cleaner
suitable for use with silicone
items.
FAQs can be found at
www.bvibe.com
Email us at
customerservice@bvibe.com
for any unanswered questions
3. Lubricate your anal beads
with a water based, silicone
compatible lubricant.
4. Turn ON your anal beads by
pressing quickly at the
bottom of your anal beads.
The light will flash, indicating
the power is on and in standby
mode.
Push again to use the
manual mode, or push
on the remote to pair
the remote & anal beads.
Once in use, the base light will
change from flashing to solid.
TOY CLEANER
LUBE
8 9
5. To change the vibration mode/
pattern and intensity via the base
control, press the A. There are a
total of 15 modes when using
manual control. Vibration intensity
can only be increased via use of
the remote control.
6. To change the vibration intensity
and/or the mode/pattern via the
remote control, press and release A
(Increase Intensity) and A (Decrease
Intensity). Press and release A to
change the vibration mode/pattern.
1. To turn the item ON quickly press A
The A will flash to indicate the power
is on. Push again to change the vibration
pattern. There are a total of 15 modes
using the manual control. Vibration
intensity can only be increased via use of
the remote control.
2. To power OFF your anal beads press
and hold A for 2 seconds. LED will turn
off to indicate the power is OFF.
MANUAL CONTROL
12
10 11
1. First turn your anal beads on in standby
mode by quickly pressing on your
anal beads.
2. While the baselight is flashing, power
on your remote to pair the remote & anal
beads.
3. Once the item is paired the base light
will become solid and you can control
your anal beads by remote.
4. Press and release to increase
vibration intensity.
5. Press and release to decrease
vibration intensity. There are a total of 6
vibration intensity levels.
6. The vibration modes can be changed
by pressing and releasing A. There
are 15 vibration modes when using the
remote control.
7. To turn the item ON/OFF press and
release A on the remote.
8. To completely turn off your anal
beads, you must press and hold A on
your anal beads.
REMOTE CONTROL
12 13
CHARGING YOUR ANAL BEADS CHANGING YOUR REMOTE CONTROL BATTERY
• Attach the USB charging plug
to the designated magnetic
charging area on the base of
the product.
• Flashing light indicates item is
charging.
• Solid light indicates item is
fully charged.
• Rapid flashing indicates
charging is required.
• Your anal beads require
approximately 2 hours for
full charge.
• Slide open the remote
control battery compartment
as shown.
• Button cell CR 2032 has been
preinstalled into the remote
control.
• Remove the paper slip inside
the battery compartment
to activate the power in the
remote control.
• Store the remote control
and the battery separately to
prolong the battery life.
Flashing light = Charging
Solid light = Fully Charged
OPEN
14 15
TRAVEL LOCK
• All b-Vibe items include travel lock for
safe and convenient travel
Via the remote:
Simultaneously press and hold the A
and A buttons for 3 seconds. Flashing
light on the remote will indicate the
item is locked.
To unlock simply press and hold A
and A again for 3 seconds. Flashing
light will indicate lock is disabled.
Via the anal beads:
Hold A for 5 seconds, flashing light on
the base of the anal beads will indicate
the item is locked. For unlocking, hold
A again for 5 seconds, flashing light
will indicate the item is unlocked.
12
3
123
45
VIBRATING MODES
• There are 6 vibration intensities.
• There are 15 vibration modes, explained below:
Vibration Pattern 4
Vibration Pattern 5
1. Low
2. Speed II
3. Speed III
4. Speed IV
5. Speed V
6. Maximum
Vibration Intensity Vibration Pattern
Vibration Pattern 3
Vibration Pattern 2
Vibration Pattern 8
Vibration Pattern 6
Vibration Pattern 1
Vibration Pattern 7
16 17
1. Always clean your anal beads
thoroughly before and after each use.
2. We recommend premium water-
based lubricant. Silicone-based
lubricants are not recommended and
can cause damage to the product.
3. To properly clean your anal beads,
wash with luke-warm water and a
respected antibacterial soap. Rinse
clean and pat dry using a lint-free
cloth or towel. Do not use cleaners
containing alcohol, petrol or acetone.
4. Avoid leaving your anal beads in
direct sunlight and never expose it to
extreme heat.
b-Vibe CARE
Cleaning, Storage & Safety
TOY CLEANER
LUBE
VIBRATING MODES
Vibration Pattern 15
1. Low
2. Speed II
3. Speed III
4. Speed IV
5. Speed V
6. Maximum
Vibration Intensity Vibration Pattern
Vibration Pattern 13
Vibration Pattern 14
Vibration Pattern 10
Vibration Pattern 9
Vibration Pattern 11
Vibration Pattern 12
18 19
5. Our products are designed to
be splash-proof. This means that
a session in the shower or washing
in running water will not cause
damage, but prolonged exposure —
such as using in the bath — would
be harmful. Do not fully submerse
your anal beads in water.
6. Never charge your anal beads
while they are wet. Ensure that
the charging pins on the base of
the anal beads are completely dry
before connecting to the charging
cord.
If your anal beads appear to
function abnormally, turn OFF and
consult our customer care section
on bvibe.com, where you will
find help tips. Should you require
further assistance please contact:
customerservice@bvibe.com
Never charge your
anal beads while
they are wet.
Materials
Size
Weight
Battery
Charging
Use Time
Max Noise Level
Interface
Body Safe Silicone
/ ABS
137 x 63 x 28 mm
74 g
Battery li-ion
320mAh
2 hours
1 hour
< 68 dB
Single Button
Manual Control
4 Button Remote
Control
SPECIFICATIONS
20 21
The crossed-out dustbin symbol indicates that these items should not be
treated as household waste, but rather brought to the appropriate collection
point for recycling electrical and electronic equipment.
DISPOSAL INFORMATION
Disposal of old electronic equipment (applicable in the EU and other
European countries with separate waste collection systems):
Declaration of Conformity
Hereby, b-Vibe declares that this Cinco Anal beads product is in compliance
with essential requirements and other relevant provisions of Directive 1999/5/
EC. A copy of the Declaration of Conformity can be found at www.bvibe.com.
RADIO AND TELECOMMUNICATION TERMINAL EQUIPMENT (R&TTE)
22 23
FCC STATEMENT
Complete user instructions in additional
languages and FAQ can be found at:
www.bvibe.com
Email us at
customerservice@bvibe.com
for any unanswered questions
Designed and Developed by
b-VibeTM
Made in China
© 2016 b-VibeTM
bvibe.com