A and H Design Group TRC-013TX Wireless remote control vibrator User Manual The Prostate Rabbit cs5 indd

Download:
Mirror Download [FCC.gov]
Document ID	3125537
Application ID	jqQwb2cUQhXdcpbe5RIGnQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	189.29kB (2366141 bits)
Date Submitted	2016-09-07 00:00:00
Date Available	2016-09-07 00:00:00
Creation Date	2016-08-19 15:12:51
Producing Software	Adobe PDF Library 9.9
Document Lastmod	2016-09-02 15:23:07
Document Title	The Prostate Rabbit-cs5.indd
Document Creator	Adobe InDesign CS5 (7.0)

OvervieW
All products by The Rabbit CompanyTM are made from
soft, smooth, body safe materials.
Our easy to use interface allows users to easily find the
right stimulation and intensity. get ready for sensual
satisfaction that can not be matched and will have you
craving for more.
The Prostate RabbitTM
THe PrOSTATe rABBiT
WireLeSS reMOTe CONTrOL
Power
Button
Led
indicator
Power
Button
Prostate/Anal
Massager
increase
intensity
rabbit
Function
Control
decrease
intensity
Prostate/Anal
vibration
Function Button
Clitoral/
Perineum
Stimulator
getting started
1. Before first use, charge your
rabbit for approximately 2 hours.
The USB charging cable can
be plugged into any USB port
or USB/AC power adapter (not
included).
3. Lubricate your rabbit (if
needed) with a water based,
silicone compatible lubricant.
4. Turn ON your rabbit by
quickly at the
pressing
bottom of your rabbit. The
light will flash, indicating
the power is on and in
standby mode.
• Flashing Light = Charging
• Solid Light = Fully Charged
• Rapid Flashing Light = Low
		battery, charge is needed
TOY CL
EA
2. Wash your rabbit with soap
and water, or toy cleaner suitable
for use with silicone items.
LUBE
NER
Push
again on your rabbit to
use the manual mode, or push
A on the remote to pair the
remote & rabbit.
Once in use, the base light will
change from flashing to solid.
FAQs can be found at
www.TheRabbitCompany.com
Email us at
customercare@TheRabbitCompany.com
for any unanswered questions
MANUAL CONTROL
5. To change the vibration pattern
via the base control, press the
6. To change the vibration intensity
via the remote control press and
release A (Increase Intensity) and A
(Decrease Intensity).
1. To turn the item ON quickly press
on your rabbit. The
will flash to
indicate the power is on. Push
again
to change the vibration pattern.
There are a total of 6 modes using the
manual control.
2. To power OFF your rabbit press
and hold for 2 seconds. LED will turn off
to indicate the power is OFF.
REMOTE CONTROL
1. First turn your rabbit on in standby
mode by quickly pressing
on the
bottom of your rabbit.
2. While the baselight is flashing, press
A to power on your remote to pair the
remote & rabbit.
3. Once the item is paired the base
light
will become solid and you can
control your rabbit by remote.
4. Press and release A on the remote to
increase vibration intensity.
5. Press and release A on the remote to
decrease vibration intensity.
turn on the independent prostate/anal
massager.
8. To change the individual vibrator in
the rabbit attachment (clitoral/perineum
stimulator), press and release
9. Holding
for 3 seconds will turn OFF
the independant rabbit vibrator. Pressing
and releasing
will turn it back ON.
10. To turn the item ON/OFF press and
release A on the remote.
11. To completely turn off your rabbit,
press and hold
on your rabbit.
6. To change the independent vibrator
in the prostate/anal massager, press and
release
7. Holding
for 3 seconds will turn
off the independent prostate/anal
massager. Holding
for 3 seconds will
10
11
CHArgiNg
CHANgiNg YOUr reMOTe CONTrOL BATTerY
• Insert the charging plug into
the designated charging area
• Slide open the remote
control battery compartment
as shown.
• Button cell CR 2032 has
been preinstalled into the
remote control.
• Flashing light indicates item
is charging
• Remove the paper slip inside
the battery compartment
to activate the power in the
remote control.
• Solid light indicates item is
fully charged
Flashing light = Charging
• Rabbits require approximately
2 hours for full charge
• Suggested to remove the
battery from the remote
control for extended stroage.
Store the remote control and
the battery seperately.
OPEN
Solid light = Fully Charged
12
13
travel lock
• The Rabbit Company™ items include
a travel lock for safe and convenient
travel.
VIBRATING MODES
23
Internal Stimulators
External Stimulators
1. Constant
For the remote:
2. Wave
Simultaneously press and hold the A
and A buttons for 3 seconds. Flashing
light will indicate the item is locked.
3. Pulse
To unlock simply press and hold A
and A again for 3 seconds. Flashing
light will indicate lock is disabled.
For the rabbit:
Hold
for 5 seconds, flashing
light will indicate the item is locked.
For unlocking, hold
again for 5
seconds, flashing light will indicate the
item is unlocked.
14
23
45
4. Ascend
5. Oscillate
6. Random
15
HARE CARETM
Cleaning, Storage & Safety
TOY CL
EA
NER
1. Always clean your rabbit
thoroughly before and after
each use.
2. We recommend using a premium
water-based lubricant when needed.
Silicone-based lubricants are not
recommended and can cause
damage to the product. Never use
hand cream, or massage oils as
lubricants for your intimate areas.
3. To properly clean your rabbit,
use a suitable cleanser such as
The Rabbit Company’s Hare Care™
Cleansing Spray. If this is not
available, wash the silicone area of
your rabbit with luke-warm water
and a respected antibacterial soap.
16
Rinse clean and pat dry using a
lint-free cloth or towel. Do not
use cleaners containing alcohol,
petrol or acetone.
4. Avoid leaving your rabbit in
direct sunlight and never expose
it to extreme heat.
LUBE
5. Our products are designed to
be splash-proof. Never immerse
your rabbit in water.
If your rabbit appears to function
abnormally, turn off and consult
our customer care section on
TheRabbitCompany.com where
you will find help tips. Should
you require further assistance
please contact:
customercare@TheRabbitCompany.com
17
SPECIFICATIONS
18
Materials
Body Safe Abs / Silicone
Size
102 x 107 x 39 mm
Weight
130 g
Battery
Li-ion 720mAh
Charging
2 hours
Use Time
1 hour
Max Noise Level
< 68 dB
Interface
Single Button Manual Control
5 Button Remote Control
Modes
12
DISPOSAL INFORMATION
Disposal of old electronic equipment (applicable in the EU and other European
countries with separate waste collection systems):
The crossed-out dustbin symbol indicates that these items should not be
treated as household waste, but rather brought to the appropriate collection
point for recycling electrical and electronic equipment.
19
R&TTE STATEMENT:
Declaration of Conformity
However, there is no guarantee that interference will not occur in a particular installation.
Hereby, b-Vibe declares that this Rimming Plug product is in compliance with
essential requirements and other relevant provisions of Directive 1999/5/EC. A
copy of the Declaration of conformity can be found at www.bvibe.com
which can be determined by turning the equipment off and on, the user is encouraged
If this equipment does cause harmful interference to radio or television reception,
to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
Declaration of Conformity
We declare on our sole responsibility that this equipment complies with the essential
requirements of the Radio and Telecommunications Terminal Equipment Directive,
1999/5/EC, and that any applicable Essential Test Suite measurements have been
performed.
protection against harmful interference in a residential installation. This equipment
CE versions of the Wireless remote control vibrator (Model No: TRC-013 BLK, TRC-013 NAV)
which display the CE symbol on the product label, comply with the essential
generates, uses and can radiate radio frequency energy and, if not installed and used
requirements of the European Radio and Telecommunication Terminal Directive
in accordance with the instructions, may cause harmful interference to radio communications.
1999/5/CE.
20
21
Complete user instructions in additional
languages can be found at:
www.TheRabbitCompany.com
FAQs can be found at
www.TheRabbitCompany.com
Sold as a novelty only. Made and packed in China. All rights
reserved. The shape and appearance of the products in this guide
are a trademark and trade dress of B.C.B.V.I © 2016
Visit www.trcpatents.com for more info.
Email us at
customercare@TheRabbitCompany.com
for any unanswered questions
21
Warning: This product is for adults only. To avoid injury or
aggravation of pre-existing conditions, this device should not be
used on swollen or inflamed areas, or skin lacerations. No medical
claims are warranted or implied by the use of this product.
22
Designed and Developed by
The Rabbit CompanyTM
Made in China
© 2016 The Rabbit CompanyTM
23
TheRabbitCompany.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2016:08:19 15:12:51+08:00
Creator                         : Adobe InDesign CS5 (7.0)
Modify Date                     : 2016:09:02 15:23:07+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2016:09:02 15:23:07+08:00
Creator Tool                    : Adobe InDesign CS5 (7.0)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 5575 bytes, use -b option to extract), (Binary data 10240 bytes, use -b option to extract)
Instance ID                     : uuid:5482cac4-8879-4043-9144-63e6ce919b16
Original Document ID            : xmp.did:F77F117407206811AB08C103085F6733
Document ID                     : xmp.did:E7D97574072068118083C6F381E63D92
Rendition Class                 : proof:pdf
Version ID                      : 1
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:F77F117407206811AB08C103085F6733, xmp.iid:F87F117407206811AB08C103085F6733, xmp.iid:F97F117407206811AB08C103085F6733, xmp.iid:FB7F117407206811AB08C103085F6733, xmp.iid:ea0fcf08-f38f-4d35-a7a0-1e8fd1e40590, xmp.iid:dc74a0d9-d13f-460f-bc88-290efa9b4bf5, xmp.iid:0b11c299-0a06-435a-80ca-9ca4b15d05f8, xmp.iid:dfc72212-954b-4f9c-9545-6cc8970756df, xmp.iid:f85834c6-ec22-4b5f-a585-7999fdcc102e, xmp.iid:4f5aae90-4de7-466f-8873-293094c10875, xmp.iid:74258bac-091c-4f2a-9933-6229d84d68a2, xmp.iid:5382447a-1bae-4d58-a260-98978f1db090, xmp.iid:55f04467-45a5-49fd-b75b-6fc2603c42fa, xmp.iid:5c75318c-cbaf-459e-b9ec-b5ea35b05beb, xmp.iid:da5c4541-bf91-4dc2-b0bf-df126a5372e5, xmp.iid:abf52c33-b77c-47a6-b72d-87408ef0dda1, xmp.iid:08e15b7d-4822-410e-83f6-5a68783430ac, xmp.iid:54CA9298102068118083C6F381E63D92, xmp.iid:55CA9298102068118083C6F381E63D92, xmp.iid:AE55277407206811822AAA97C46C8D1F
History When                    : 2014:11:24 14:05:55+08:00, 2014:11:24 14:06:14+08:00, 2014:11:24 14:06:14+08:00, 2014:11:24 14:23:27+08:00, 2015:11:16 15:17:29+08:00, 2015:11:16 15:17:29+08:00, 2015:11:16 15:40:03+08:00, 2015:11:16 17:23:11+08:00, 2015:11:26 14:47:56+08:00, 2015:11:26 14:47:56+08:00, 2016:03:28 14:00:53+08:00, 2016:03:28 14:00:53+08:00, 2016:03:28 14:12:28+08:00, 2016:08:01 17:13:44+08:00, 2016:08:01 17:13:44+08:00, 2016:08:01 17:53:11+08:00, 2016:08:18 10:34:07+08:00, 2016:08:18 15:20:44+08:00, 2016:08:18 15:20:44+08:00, 2016:08:19 15:12:40+08:00
History Software Agent          : Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign CS6 (Macintosh), Adobe InDesign CC (Macintosh), Adobe InDesign CC (Macintosh), Adobe InDesign CC (Macintosh), Adobe InDesign CC (Macintosh), Adobe InDesign CC (Macintosh), Adobe InDesign CC (Macintosh), Adobe InDesign CC 2015 (Macintosh), Adobe InDesign CC 2015 (Macintosh), Adobe InDesign CC 2015 (Macintosh), Adobe InDesign CC 2015 (Macintosh), Adobe InDesign CC 2015 (Macintosh), Adobe InDesign CC 2015 (Macintosh), Adobe InDesign CC 2015 (Macintosh), Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /, /metadata, /, /, /metadata, /, /, /metadata, /, /, /metadata, /, /, /metadata, /, /, /;/metadata, /metadata, /;/metadata
Derived From Instance ID        : xmp.iid:f85834c6-ec22-4b5f-a585-7999fdcc102e
Derived From Document ID        : xmp.did:F77F117407206811AB08C103085F6733
Derived From Original Document ID: xmp.did:F77F117407206811AB08C103085F6733
Derived From Rendition Class    : default
Doc Change Count                : 61
Key Stamp Mp                    : AAAAAA==
Format                          : application/pdf
Title                           : The Prostate Rabbit-cs5.indd
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
GTS PDFX Version                : PDF/X-1:2001
GTS PDFX Conformance            : PDF/X-1a:2001
Page Count                      : 14

EXIF Metadata provided by EXIF.tools