AAMP of Florida AAMP Global ISBT23 MusicStream User Manual
AAMP of Flordia, dba AAMP of America MusicStream
User Manual
MusicStream
Adds Bluetooth® music streaming to any AUX or RCA input
IN-CAR CONNECTIVITY
Tech Support:
support@isimplesolutions.com
866-788-4237
WARNING:
This equipment may be reset by unintentional electrostatic discharge during operation. Exposure to direct sunlight or extreme heat may cause damage or
malfunction.
FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
1. Re-orientate or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that of which the receiver is connected.
4. Consult the dealer or an experienced radio / television technical for help.
ISBT23
Installation
Connect the black wire to ground and the red wire to a
switched 12v power source.
Note: If the application is in an environment where
moisture could be present, the marine grade heat shrink
tubing should be placed over the power wires prior
to connecting. Once connections are made, move the
tubing over the connection and apply heat.
using the RCA to 3.5mm tieline if necessary.
Secure the MusicStream to a safe and hidden location
trying to avoid metal cages or large metal shields.
Pairing and Operation
Start the vehicle or turn the key to the on position to power up the MusicStream.
Using the smartphone or portable audio device, scan for available Bluetooth devices.
Select “MusicStream” from the list.
Once connected, start playing music.
Note: The MusicStream will automatically re-connect to the paired device when returning to the vehicle for future use.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance of 20 cm between the radiator and your body.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.