ABITRON Control Systems 434TR1 Transceiver Module User Manual Technische Dokumentation
ABITRON Control Systems GmbH Transceiver Module Technische Dokumentation
integration manual
Integration Manual Synthesizer Transceiver Transmitter CSxxxTRT-1 with Feedback function KH66983xxx61 End users may not be provided with this module installation instructions Version 1.00 1.00 Date 21.11.2014 02.02.2015 Name ORD FRM Comment Initial release documentation Frequency Allocation CS458TRT-1 changed (CH24&25) ABITRON Control Systems GmbH Wiesnerstraße 20 A-4950 Altheim © by ABITRON Control Systems GmbH 01 Description The CSxxxTRT-1 is a transceiver RF-Module, wich has multiple functions. The RF-Module can be used as following: 1. Transmitter or Receiver half duplex (Use the TX/RX Inpt to change the Mode Transmitter/Receiver) 2. Feedback Master (Decoder) or Feedback Slave (Encoder) for 3 LED-FB configuration. The functions can be selected with the SIP.Switches for the frequency allocation and with the solder jumpers for the Transmitter/Receiver or feedback slave selection. The counterpart of this module is the TRR (CSxxxTRR-1) with a receiver mounting and is more suitable to be used in a receiver-system. This module has a ISP(In System Programming) Port, wich makes it flexible for later firmware changes. The CSxxxTRT can work with serial data of 2400 to 9600 baud. The CSxxxTRT can work with serial data of 2400 to 19200 baud. Integration instructions: - This module may only used with the antenna listed in this document - This module can only be used for devices not "body worn" and the separation distance between the user and the device must be greater than 20 cm. FCC § 15.105 Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. ICES-003 This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Name: Date: created: modified: ORD 21.11.2014 FRM 02.02.2015 „Synthesizer Transceiver Transmitter CSxxxTRT-1“ „with Feedback function“ page 1 of 14 Item.-No KH66983xxx61 02 Block Diagram Name: Date: created: modified: ORD 21.11.2014 FRM 02.02.2015 „Synthesizer Transceiver Transmitter CSxxxTRT-1“ „with Feedback function“ page 2 of 14 Item.-No KH66983xxx61 03 Technical Data Supply Voltage: Current drain: Outputs: 3,4-12 VDC (empfohlen 3.4-5VDC) <50 mA TTL Data Output (Open drain with 4.7K pull up) DK-Sync Output (Open drain with 4.7K pull up) Telegram Out (Open drain with 10K pull up) 3xIO can be connected directly with LED‘s Antenna (connect with 50 Ohm antenna) 3xIO can be used as FB-Input 0-5V, for higher voltage use a seriel resistor Dekrement/Green LED Input (0-12V) TX/RX Input (0-12V) antenna (connect with 50 Ohm antenna) TTL Data Input (0-5V) 2400-19200 -20o C to 70o C TX to RX or RX to TX 10mS for temperature –10 to 50 C 20mS for temperature –20 to 70 C FSK Narrow Inputs: Temperature range: Change Time Modulation Name: Date: created: modified: ORD 21.11.2014 FRM 02.02.2015 „Synthesizer Transceiver Transmitter CSxxxTRT-1“ „with Feedback function“ page 3 of 14 Item.-No KH66983xxx61 04 Connection Diagram 04.1 Standard Connection 04.2 Modi 04.2.1 Connecting as Transmitter or Receiver CSxxxTRT-1 as Reciever CSxxxTRT-1 as Transmitter There is a delay of 2s fo the decrementalswitch to prevent an accidental channel change and to make sure that the coder has enough time to transmitt the ESTOP command. Name: Date: created: modified: ORD 21.11.2014 FRM 02.02.2015 „Synthesizer Transceiver Transmitter CSxxxTRT-1“ „with Feedback function“ page 4 of 14 Item.-No KH66983xxx61 04.2.2 Connecting as Feedback Master (Control side) There is a delay of 2s fo the decremental-switch to prevent an accidental channel change and to make sure that the coder has enough time to transmitt the ESTOP command. Set the decoder baud rate on 4800, if the intern Feedback Feature is used. 04.2.3 Connecting as Feedback Slave (Machine side) Name: Date: created: modified: ORD 21.11.2014 FRM 02.02.2015 „Synthesizer Transceiver Transmitter CSxxxTRT-1“ „with Feedback function“ page 5 of 14 Item.-No KH66983xxx61 04.3 Jumper Configuration J1 Offen Closed Closed J2 Offen Open Closed J3 Offen Open Open Function Normal FB-Master FB-Slave Standard Einstellung J3 = reserved SW1 is the channel changing input (Manueller Kanal, AUTX/ FCS/ SCAN) 04.4 Installation-/Application Note If the used RF-Module has a FCC/IC approval number, the number must be visible outside on the housing. Warning: [Any] changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Name: Date: created: modified: ORD 21.11.2014 FRM 02.02.2015 „Synthesizer Transceiver Transmitter CSxxxTRT-1“ „with Feedback function“ page 6 of 14 Item.-No KH66983xxx61 04.5 Frequency Allocation 04.5.1 CS220TRT-1 Manuel Settings Automatic Settings D1 = 0 D2 D1 = 1 D3 D4 D5 D6 Name: Date: Freq 223.1000 223.7000 233.9750 224.6000 225.0250 225.3250 CH created: modified: ORD 21.11.2014 FRM 02.02.2015 Gr.Nr. D4 D5 D6 Channels 5, 4, 3, 2, 1, 0 D2= 1 = FCS (Free Channel Search TX) und SCAN RX D3= 1 = AUTX ( Auto Channel Change TX) und SCAN-RX „Synthesizer Transceiver Transmitter CSxxxTRT-1“ „with Feedback function“ page 7 of 14 Item.-No KH66983xxx61 04.5.2 CS419TRT-1 Manuel Settings Automatic Settings D1 = 0 D2 D1 = 1 D3 D4 D5 D6 Freq 418.9500 418.9750 419.0000 419.0250 419.0500 419.0750 419.1000 419.1250 419.1500 419.1750 419.2000 419.2500 419.2250 418.7250 418.7500 418.7750 418.8000 418.8250 418.8500 418.8750 418.9000 418.9250 419.2750 419.3000 419.3250 419.3500 419.3750 419.4000 419.4250 418.7250 418.7500 418.7750 CH 10 11 12 13 14 15 16 17 18 19 21 20 22 23 24 25 26 27 28 Gr.Nr. D4 D5 D6 Channels 21, 19, 15, 10 18, 14, 11, 9 21, 19, 18, 17, 16, 15,14, 13, 12, 11, 10, 9 28, 26, 23, 19, 13, 5 25, 23, 20 16, 10, 2 24, 22, 19, 15, 9, 1 27, 21, 13, 11, 8, 4 26, 18, 14, 12, 6, 3 D2= 1 = FCS (Free Channel Search TX) und SCAN RX D3= 1 = AUTX ( Auto Channel Change TX) und SCAN-RX Frequency for China Name: Date: created: modified: ORD 21.11.2014 FRM 02.02.2015 „Synthesizer Transceiver Transmitter CSxxxTRT-1“ „with Feedback function“ page 8 of 14 Item.-No KH66983xxx61 04.5.3 CS429TRT-1 Manuel Settings Automatic Settings D4, D5, D6 = 0 D1 D2 D3 D4 D5 Name: Date: D6 Freq 429.2500 429.2625 429.2750 429.2875 429.3000 429.3125 429.3250 429.3375 429.3500 429.3625 429.3750 429.3875 429.4000 429.4125 429.4250 429.4375 429.4500 429.4625 429.4750 429.4875 429.5000 429.5125 429.5250 429.5375 429.5500 429.5625 429.5750 429.5875 429.6000 429.6125 429.6250 429.6375 429.6500 429.6625 429.6750 429.6875 429.7000 429.7125 429.7250 429.7375 CH 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 created: modified: ORD 21.11.2014 FRM 02.02.2015 Gr.Nr. D1 D2 D3 Channels 7,15,27,43,11,19,31,23,35,39 8,16,28,44,12,20,32,24,36,40 9,17,29,45,13,21,33,25,37,41 10,18,30,46,14,22,34,26,38,42 no Function no Function Scan all channels „Synthesizer Transceiver Transmitter CSxxxTRT-1“ „with Feedback function“ page 9 of 14 Item.-No KH66983xxx61 04.5.4 CS434TRT-1 Channel Set A Manuel Settings Automatic Settings D1 = 0 D2 D1 = 1 D3 D4 D5 D6 Freq 433.0750 433.1000 433.1250 433.1500 433.1750 433.2000 433.2250 433.2500 433.2750 433.3000 433.3250 433.3500 433.3750 433.4000 433.4250 433.4500 433.4750 433.5000 433.5250 433.5500 433.5750 433.6000 433.6250 433.6500 433.6750 433.7000 433.7250 433.7500 433.7750 433.8000 433.8250 433.8500 CH 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Gr.Nr. D4 D5 D6 Channels 32, 22, 18, 16, 13, 5 31, 23, 19, 17, 11, 8 30, 28, 25, 21, 15, 7 29, 27, 24, 20, 14, 6 no Function no Function no Function no Function D2= 1 = FCS (Free Channel Search TX) und SCAN RX D3= 1 = AUTX ( Auto Channel Change TX) und SCAN-RX Max. Power 10mW ERP, 100% allowed Duty Cycle in Europe Max. Power 1mW ERP, 100% allowed Duty Cycle in Europe USA Candada Approval-Numbers FCC-ID: 2AC8P-434TR1 IC-ID: 12310A-434TR1 Name: Date: created: modified: ORD 21.11.2014 FRM 02.02.2015 „Synthesizer Transceiver Transmitter CSxxxTRT-1“ „with Feedback function“ page 10 of 14 Item.-No KH66983xxx61 04.5.5 CS434TRT-1 Channel Set B Manuel Settings Automatic Settings D1 = 0 D2 D1 = 1 D3 D4 D5 D6 Freq 433.1000 433.5500 434.0500 434.0750 434.1000 434.1250 434.1500 434.1750 434.2000 434.2250 434.2500 434.2750 434.3000 434.3250 434.3500 434.3750 434.4000 434.4250 434.4500 434.4750 434.5000 434.5250 434.5500 434.5750 434.6000 434.6250 434.6500 434.6750 434.7000 434.7250 434.7500 434.7750 CH 20 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 Gr.Nr. D4 D5 D6 Channels 68, 58, 54, 52, 49, 41 67, 59, 55, 53, 47, 44 66, 64, 61, 57, 51, 43 65, 63, 60, 56, 50, 42 38, 32, 28, 18, 10, 8, 5 37, 29, 25, 23, 17, 14, 4 36, 34, 31, 27, 21, 13, 3 35, 33, 30, 26, 20, 12, 2 D2= 1 = FCS (Free Channel Search TX) und SCAN RX D3= 1 = AUTX ( Auto Channel Change TX) und SCAN-RX Max. Power 10mW ERP, 100% allowed Duty Cycle in Europe Max. Power 1mW ERP, 100% allowed Duty Cycle in Europe USA Candada Approval-Numbers FCC-ID: 2AC8P-434TR1 IC-ID: 12310A-434TR1 Name: Date: created: modified: ORD 21.11.2014 FRM 02.02.2015 „Synthesizer Transceiver Transmitter CSxxxTRT-1“ „with Feedback function“ page 11 of 14 Item.-No KH66983xxx61 04.5.6 CS434TRT-1CS Manuel Settings Automatic Settings D1 = 0 D1 = 1 D2 D3 D4 D5 D6 Freq 433,8750 433,9000 433,9250 433,9500 433,9750 434,0000 434,0250 434,0500 434,0750 434,1000 434,1250 434,1500 434,1750 434,2000 434,2250 434,2500 434,2750 434,3000 434,3250 434,3500 434,3750 434,4000 434,4250 434,4500 434,4750 434,5000 434,5250 434,5500 434,5750 434,6000 434,6250 434,6500 CH 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 CS-CH A1 B1 A2 B2 A3 B3 A4 B4 A5 B5 A6 B6 A7 B7 A8 B8 A9 B9 A10 B10 A11 B11 A12 B12 A13 B13 A14 B14 A15 B15 A16 B16 Gr.Nr D4 D5 D6 64, 62, 60, 58, 56, 54, 52, 50, 48, 46, 44, 42, 40, 38, 36, 34 no Function no Function Channels 61, 57, 53, 49, 45, 41, 37, 33 62, 58, 54, 50, 46, 42, 38, 34 63, 59, 55, 51, 47, 43, 39, 35 64, 60, 65, 52, 48, 44, 40, 36 63, 61, 59, 57, 55, 53, 51, 49, 47, 45, 43, 41, 39, 37, 35, 33 D2= 1 = FCS (Free Channel Search TX) und SCAN RX D3= 1 = AUTX ( Auto Channel Change TX) und SCAN-RX Comparision to CS434 Gr.Nr J1 J2 J3 Description 8 Channel uneven A 8 Channel uneven B 8 Channel even A 8 Channel even B 16 Channel A 16 B Max. Power 10mW ERP, 100% allowed Duty Cycle in Europe Max. Power 1mW ERP, 100% allowed Duty Cycle in Europe USA Candada Approval-Numbers FCC-ID: 2AC8P-434TR1 IC-ID: 12310A-434TR1 Name: Date: created: modified: ORD 21.11.2014 FRM 02.02.2015 „Synthesizer Transceiver Transmitter CSxxxTRT-1“ „with Feedback function“ page 12 of 14 Item.-No KH66983xxx61 04.5.7 CS458TRT-1 Manuel Settings Automatic Settings D1 = 0 D2 D1 = 1 D3 D4 D5 D6 Freq 458.5000 458.5250 458.5500 458.5750 458.6000 458.6250 458.6500 458.6750 458.7000 458.7250 458.7500 458.7750 458.8000 458.8250 458.8500 458.8750 458.9000 458.9250 458.9500 458.9750 459.0000 459.0250 459.0500 459.0750 459.1000 459.1250 459.1500 459.1750 459.2000 458.5000 458.5250 458.5500 Kanal 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Gr.Nr. D4 D5 D6 Channels 18, 15, 10, 3, 1 17, 14, 9, 2, 0 18, 12, 8, 5, 3 17, 11, 7, 4, 2 27, 19, 16, 14, 10, 0 24, 15, 13, 9, 6, 1 26, 18, 12, 8, 5, 3 25, 17, 11, 7, 4, 2 D2= 1 = FCS (Free Channel Search TX) und SCAN RX D3= 1 = AUTX ( Auto Channel Change TX) und SCAN-RX UK Kanäle USA Candada Approval-Numbers FCC-ID: 2AC8P-458TR1 IC-ID: 12310A-458TR1 Name: Date: created: modified: ORD 21.11.2014 FRM 02.02.2015 „Synthesizer Transceiver Transmitter CSxxxTRT-1“ „with Feedback function“ page 13 of 14 Item.-No KH66983xxx61 04.5.8 CS869TRT-1 Manuel Settings Automatic Settings D1 = 0 D2 D1 = 1 D3 D4 D5 D6 Freq 869.3000 869.3250 869.3500 869.3750 869.4000 869.7000 869.7250 869.7500 869.7750 869.8000 869.8250 869.8500 869.8750 869.9000 869.9250 869.9500 869.9750 870.0000 869.4250 869.4500 869.4750 869.5000 869.5250 869.5500 869.5750 869.6000 869.6250 869.6500 869.6750 868.0000 868.2500 868.5000 Ch 52 53 54 55 56 68 69 70 71 72 73 74 75 76 77 78 79 80 57 58 59 60 61 62 63 64 65 66 67 10 20 Gr.Nr. D4 D5 D6 Channels 75, 71, 68, 54, 52 76, 72, 69, 55, 53 79, 77, 73, 70, 56 78, 76, 73, 69, 55 66, 62, 59, 57 67, 63, 60, 58 24, 19, 16, 7, 3, 1 23, 18, 15, 6, 2, 0 D2= 1 = FCS (Free Channel Search TX) und SCAN RX D3= 1 = AUTX ( Auto Channel Change TX) und SCAN-RX Erlaubter Duty Cycle 100% Erlaubter Duty Cycle 1% Erlaubter Duty Cycle 0.1% Erlaubter Duty Cycle 10% Name: Date: created: modified: ORD 21.11.2014 FRM 02.02.2015 „Synthesizer Transceiver Transmitter CSxxxTRT-1“ „with Feedback function“ page 14 of 14 Item.-No KH66983xxx61
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : Dejan Oroz Create Date : 2015:02:13 12:36:34+01:00 Modify Date : 2015:02:14 11:39:51+01:00 Subject : Vorlage Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : Dejan Oroz Description : Vorlage Title : Technische Dokumentation Creator Tool : Microsoft® Word 2013 Metadata Date : 2015:02:14 11:39:51+01:00 Producer : Acrobat Distiller 10.1.7 (Windows) Document ID : uuid:c0aab4d5-13ad-4d38-a3e8-5ad8ea09d77f Instance ID : uuid:bf0b2fc7-3871-4189-b6ed-c85d4327434b Page Count : 15EXIF Metadata provided by EXIF.tools