ACCO USA 1427441B01DA PS3 OPP WIRELESS CONTROLLER User Manual 1427441 01 PS3 WirelessController UM indd
Bensussen Deutsch & Associates, Inc. PS3 OPP WIRELESS CONTROLLER 1427441 01 PS3 WirelessController UM indd
ACCO USA >
User Manual
WIRELESS CONTROLLER Customer Service Service client Servicio a clientes for PS3 BDA Inc. 15525 Woodinville-Redmond Rd NE Woodinville, WA 98072 Customer Service@PowerA.com USER MANUAL Manuel de l’utilisateur Manual de usuario 2-Year Limited Warranty: Visit PowerA.com for details Garantía limitada de 2 años. Visita PowerA.com para obtener detalles Garantie limitée de 2 ans – Rendez-vous sur PowerA.com pour de plus amples informations Fig. 1 Front View Fig. 2 Top View SELECT Button START Button Fig. 3 LED Channel Indicator Directional Pad HOME Action Buttons ENGLISH SET UP 1. Insert the USB Controller Adaptor into any available USB port on the PS3 console. 2. Open the battery lid located on the back of the Wireless Controller and insert 3 “AAA” batteries (not included). SYNCING YOUR WIRELESS CONTROLLER Note: This Wireless Controller requires the use of the included USB Controller Adaptor. 1. Insert the USB Controller Adaptor into any available USB port on the PS3 console. 2. Press the “Connect” button on the USB Controller Adaptor. The LED light will begin flash rapidly. 3. Press the “Home” button on the Wireless Controller. 4. When the controller is properly synced to the PS3, the LED light on the USB Controller Adaptor and Controller channel indicator will stay illuminated. LED CHANNEL INDICATORS LED illuminations around the Wireless Controller “Home” button reference player connection from 1-4 players. Note: The Wireless Controller will enter a “sleep mode” after 3-5 minutes of inactivity. Press the “Home” button to reactivate the controller. The controller will automatically sync after returning to active mode. BATTERY LEAKAGE WARNING Leakage of battery fluid can cause personal injury as well as damage to your remote. If battery leakage occurs, thoroughly wash the affected skin and clothes. Keep battery fluid away from your eyes and mouth. Leaking batteries may make popping sounds. To avoid battery leakage: • Do not mix used and new batteries (replace all batteries at the same time). • Do not mix different brands of batteries. • PowerA recommends alkaline batteries. Do not use Lithium ion, Channel 1 Channel 2 Channel 3 nickel cadmium (nicad), or carbon zinc batteries. • Do not leave batteries in the remote for long periods of non-use. • Do not recharge alkaline or non-rechargeable batteries. • Do not put the batteries in backwards. Make sure that the positive (+) and negative (-) ends are facing in the correct directions. Insert the negative end first. • When removing batteries, remove the positive end first. • Do not use damaged, deformed or leaking batteries. • Remove exhausted batteries from the remote • Rechargeable batteries must be removed from the remote before being charged • Rechargeable batteries should be charged under adult supervision • Do not short circuit the supply terminals TROUBLESHOOTING PROBLEM The Wireless Controller will not connect. SOLUTION • Make sure you have followed all the syncing instructions • If the controller continues to have connection issues, reset the controller. To reset the controller re-install the batteries. Press the “Home” button, and the controller should connect properly to your PS3. PROBLEM The controller is connected, but is not responding. SOLUTION • The controller may have entered sleep mode. Press the “Home” button to return to active mode. • Confirm that the controller is assigned channel #1. Refer to the “Controller Settings” section of your PS3 User Guide for instructions. • You may need to replace your batteries. • If you have tried all of the above, make sure your PS3 is not surrounded by too many other electronic devices, wireless devices or metal objects, as these may cause interference. Try relocating your PS3 away from these types of items. FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation Fig. 4 USB Controller Adaptor Channel 4 is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. TouchSense® Technology Licensed from Immersion Corporation. Protected by one or more of the following patents:U.S. Patents: 5831408, 5844392, 5857986, 5907487, 5959613, 6020875, 6088017, 6104158, 6219032, 6246390, 6252583, 6271833, 6275213, 6278439, 6343349, 6400352, 6411276, 6424333, 6715045, 6801008, 7131073, 7199790, 7209117, 7299321, 7327348, 7345672, and 7502011.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2016:07:05 10:33:54-07:00 Creator : Adobe InDesign CC 2015 (Macintosh) Modify Date : 2016:10:25 14:00:45+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2016:10:25 14:00:45+08:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Instance ID : uuid:b7369b75-44f6-4df8-92ef-87da4c6c11fc Original Document ID : xmp.did:83795133412068118A6DAA3DB2E75982 Document ID : xmp.id:021e0c32-a4ac-4d5e-a839-448a9aa7e6bf Rendition Class : proof:pdf Version ID : 1 Derived From Instance ID : xmp.iid:e90a5d39-0393-461e-a4d4-aacbc059d0f4 Derived From Document ID : xmp.did:808c9fbe-79fe-4125-a54c-61cf6d0f4ebd Derived From Original Document ID: xmp.did:83795133412068118A6DAA3DB2E75982 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2016:07:05 10:33:54-07:00 Format : application/pdf Title : 1427441-01_PS3_WirelessController_UM.indd Producer : Adobe PDF Library 15.0 Trapped : False GTS PDFX Version : PDF/X-4 Page Count : 2EXIF Metadata provided by EXIF.tools