ACCO M01154 Kensington Presentair(TM) User Manual

ACCO Brands, Inc. Kensington Presentair(TM)

User Manual

Presentair™ Bluetooth® Presenter, Laser & StylusQUICK START GUIDERegister New Product Now To Activate Warranty!S/N:register.kensington.comKensington Computer Products GroupA Division of ACCO Brands333 Twin Dolphin Drive, Sixth floorRedwood Shores, CA 94065ACCO Brands EuropeOxford RoadAylesburyBucks, HP21 8SZUnited Kingdomwww.kensington.comACCO AustraliaLevel 2, 8 Lord StBotany NSW 2019AustraliaPatents PendingDesigned in California, U.S.A. by KensingtonMade in ChinaFor technical support visit:Pour tout support technique veullez visiter:www.kensington.comComplete warranty terms are available at: www.warranty.kensington.comQUICK START GUIDETechnical Support Technical support is available to all registered users of Kensington products.Web SupportYou may find the answer to your problem in the Frequently Asked Questions (FAQ) section of the Support area on the Kensington Website: www.support.kensington.com.Telephone Support There is no charge for technical support except long-distance charges where applicable. Please visit www.kensington.com for telephone support hours.U.S. 800-535-4242 or 650-572-2700Canada 800-268-3447 Please note the following when calling support:• Callfromaphonewhereyouhaveaccess to your device.• Bepreparedtoprovidethefollowinginformation: – Name, address, and telephone number – Name of the Kensington product – Make and model of your computer – System software and version – Symptoms of the problem and what led to them901-2624-00KLHardware ResetIf the device stops functioning properly or has become unresponsive, perform a hardware reset by pressing the reset button gently using a small paperclip. The front LED blinks once during reset.Need More?For additional instructions and disclosures, see the full Instruction Guide online at: www.kensington.com/man/K39524Kensington and the ACCO name and design are registered trademarks of ACCO Brands. The Kensington Promise is a service mark of ACCO Brands. Presentair is a trademark of ACCO Brands. All other registered and unregistered trademarks are the property of their respective owners.© 2012 Kensington Computer Products Group, a division of ACCO Brands USA LLC. Any unauthorized copying, duplicating, or other reproduction of the contents hereof is prohibited without written consent from Kensington Computer Products Group. All rights reserved. 05/12CLASS 2 LASER SAFETY STATEMENTATTENTION:LASER RADIATIONDO NOT STARE INTO BEAMCLASS 2 LASER PRODUCTWAVELENGTH: 650+/- 20nmOPTICAL POWER: <1mWIEC 60825-1: 2007-EN60825-1: 2007 ED 2.0This laser device complies with International Standard IEC/EN 60825-1: ED 2. 2007, Class 2 Laser Product and also complies with 21 CFR 1040.10 and 1040.11, except for deviations pursuant to laser Notice No. 50, dated June 24, 2007: 1. Emission of a parallel beam of visible light;2. Maximum Power of 1 milliwatt CW, wavelength range 650±20 nanometers;3. Operating temp between 0 ° C (32° F) to 40° C (104° F).• Donotdisassemblethedevice• Donotusethedeviceoutsideofitsspecifiedoperating temperature range. If the device is exposed to an environment outside of its prescribed operation, turn off the device and allow the temperature to stabilize within the specified operating range before using the device.
Power ButtonPower On/Off and Bluetooth pairingBlue LEDPower On/Off1 From On State—To Turn Power OffPress and hold the Power Button. The Presentair rear blue LED blinks rapidly. Release button, the LED fades off and the power turns off. 2a From Off State—To Turn Power OnPress the Power Button for 1 second and release. The blue LED glows, the power turns on, then the LED turns off.OR2b From Off State—To Pair DevicePress and hold the Power Button from 3 to 6 seconds. The blue LED blinks slowly and Presentair enters Pairing Mode. Release button, it stays in pairing mode for 3 minutes or until paired to a device.Pairing On the computer you are pairing Presentair to, be sure the Bluetooth Wireless is on, active, and ready to connect to a device. Follow the Bluetooth pairing instructions from your computer manufacturer for connecting Presentair. Presentair appears as a mouse device for pairing.NOTE: Your computer’s Bluetooth configuration settings need to be set to allow devices to connect to this computer. Some Windows configuration and update settings may interfere with the Bluetooth connection or function. Ensure your Windows services for Bluetooth Service and Support are Started and set to Automatic (found in Administrative Tools > Services). Ensure your Windows Bluetooth power management is not set to turn off your Bluetooth Wireless (found in Device Manager > Bluetooth > Properties > Power Management). Updating Bluetooth Drivers to the latest version found on your equipment manufacturer’s website is recommended and may be necessary.If you experience problems pairing or using Presentair, additional instructions, FAQs, and solutions with illustrations are found in the online guide at: www.kensington.com/man/K39524Mode Switching Press and hold the Down Button to switch between Presentation and Media modes.Presentation mode = Orange LED Media mode* = Blue LED* Laser does not activate in Media Mode.ButtonPresenter Mode (LED=Orange)Media Mode(LED=Blue)Up Button Turns laser on as long as button is pressed.Play/PauseDown ButtonBlack screen StopLeft Button Page up Previous song/videoRight ButtonPage down Next song/videoGetting Started1 Charge your Presentair™ Bluetooth Presenter Remote on any USB port or charging adapter for 2 hours before initial use or when the front LED blinks orange, indicating the battery is low. a b NOTE: This device has USB charging function only, and will not appear on your system as a data device when plugged into a USB port.2 The Rear LED blinks orange during charging. When the Presenter Remote is fully charged, the Rear LED glows solid orange.* Power supply not includedOR*
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement: The product comply with the US portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or reduce output power if it doesn't affect the transmission/receiving quality. IC Statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement: The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Ce dispositif est conforme a la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prejudiciable, et (2) ce dispositif doit accepter tout brouillage recu, y compris un brouillage susceptible de provoquer un fonctionnement indesirable. Déclaration d'exposition aux radiations: Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada établies pour un environnement non contrôlé. Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l'appareil peut être conservé aussi loin que possible du corps de l'utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible.

Navigation menu