ACCO M01314-D Wireless dongle for life User Manual
ACCO Brands, Inc. Wireless dongle for life Users Manual
ACCO >
Users Manual
24-month battery life
Two automatic mode change to energy-saving mode which
lower the power consumption to 9mW. Under the standard
status, 1*AA battery can last for 24 months. Low-carbon
environment save time and extend the battery life.
Nano receiver
The nano receiver can be perfectly
stored in the bottom of the mouse.
Even when you are using the
mouse, it can be perfectly hidden
inside the USB port which make
you forget about it.
Operation distance
Resolution
Engine
Accelaration
IR sensor
In order to keep the mouse for best using, A07G only require
minimum maintenance. To avoid dust, we suggest using soft cloth
or cotton yarn with little warm water to clean the nano receive
after pulling it from the USB port. Do the cleaning once in one
month. Do not use soap or trong detergent for cleaning. For best
use the mouse in controlling and oving, strongly suggest you
purchase high grade mouse pad. The mouse foot may be wear out
by some mouse pad, which make you use the mouse unfavorably
and force you change new mouse.
1
×
A07G Mouse
1
×
Nano receiver
1
×
AA battery
1
×
User guide
Package contents: Installation
Open the battery cover and insert one AA
battery. Switch the ON/OFF button to ON
please pay attention to the the positive and
negative polarity
Plug the Nano receiver into an available USB
port on your laptop or desktop.
Automatical sleep energy-saving mode
When stop using the mouse, it will automatically switch to two
grades of sleep mode, which is super energy-saving.
Time Sleep status Power consumption
After 0.2 seconds First grade
After 20 seconds Second grade
User Guide
User Guide
Thanks for buying Fuhlen products,
please read this user guide carefully before use.
Feature
Super silent keys function
The mouse has silent microswitch,
its key stroke noise is lower than
other mouse over 90%. The super
silent keys brings you good comfort
grip. No need to worry about the
annoying key stroke noise in the still
of night.
High precision IR sensor
The mouse has high precision IR
sensor with high positioning
accuracy. It can adapt with surface
in different material and brings you
high precision of the cursor control.
IR sensor
Technical data
Operation current
Power supply
Power consumption
Frequency band
Maintenance
Wireless mouse for life™
M01314-M
Kensington Computer Products Group,
A Division of ACCO Brands, LLC
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
This device complies with Industry
Canada licence-exempt RSS standard(s). Operation is subject to the
following
two conditions: (1) this device may not cause nterference, and (2)
this device must accept any interference, ncluding interference that
may cause undesired operation of the device Changes or
modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the
equipment.
NOTE:THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO
OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS
TO THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils radio exempts de
licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
Complies with the Canadian ICES-003 Class B specifications.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
This equipment complies with FCC RF radiation exposure limits
set forth for an uncontrolled environment. This device and its
antenna must not be co-located or operating in conjunction with
any other antenna or transmitter.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help.