ACD Elektronik M260SE Mobile terminal M260SE with docking station DS210 User Manual Eigenschaften TITEL

ACD Elektronik GmbH Mobile terminal M260SE with docking station DS210 Eigenschaften TITEL

Contents

User manual

 M260SE_Brief_Overview_FCC_V1.00_en_es.docx  1 / 33            Brief Overview/Resumen breve                                       M260SE Set (M260SE/DS260) U.S. Edition 2016/EE. UU. Edición 2016 Version: 1.00        © 2015 ACD Group All Rights Reserved/Todos los derechos reservados  This document may not be duplicated or made accessible to third parties without written permission by ACD.  Este documento no se puede reproducir ni facilitar a terceros sin consentimiento por escrito de ACD.
 M260SE_Brief_Overview_FCC_V1.00_en_es.docx  2 / 33 Table of Contents/Índice  English 1 Scope of Delivery ......................................................................................... 3 2 Intended Use ................................................................................................ 4 3 Handling ....................................................................................................... 5 3.1 Prior to the initial Commissioning of the M260SE ..................................................... 5 3.2 Handling of the Device and Docking Station ............................................................ 7 3.2.1 Charging the Power Supply Unit for the DS260 & M260SE ................................ 8 3.2.2 Replacing the battery in the Handheld Terminal M260SE................................... 8 3.2.3 Inserting the M260SE into the DS260 ................................................................. 9 3.2.4 Removing the M260SE from the DS260 .............................................................. 9 3.2.5 Switching on the M260SE Handheld Terminal .................................................. 10 3.2.6 Suspend Mode ................................................................................................... 10 3.2.7 Switching off the M260SE Handheld Terminal .................................................. 11 3.2.8 Status of the DS260 Docking Station LEDs....................................................... 11 3.2.9 µSD card ............................................................................................................ 12 3.2.10 RFID ................................................................................................................... 12 4 Cleaning and Maintenance Information ...................................................... 13 4.1 Display .................................................................................................................... 13 4.2 Charging and Communication Contacts ................................................................. 13 5 Service and Spare Parts ............................................................................ 14 6 󰜁Manufacturer Representations and Warranties ......................................... 15  Espanol 8 Volumen de suministro ............................................................................... 18 9 Uso previsto ............................................................................................... 19 10 Manipulación .............................................................................................. 20 10.1 Antes de la primera puesta en funcionamiento del M210SE .................................. 20 10.2 Manipulación del dispositivo y de la estación de carga .......................................... 22 10.2.1 Carga de la unidad de alimentación de la DS210 y del M210SE ...................... 23 10.2.2 Inserción de la batería en el terminal de mano M210SE................................... 23 10.2.3 Inserción del M210SE en la DS210 ................................................................... 24 10.2.4 Encendido del terminal de mano M210SE ........................................................ 24 10.2.5 Modo de suspensión .......................................................................................... 25 10.2.6 Apagado del terminal de mano M210SE ........................................................... 25 10.2.7 Estado de los LED de la estación de carga DS210 ........................................... 26 11 Información de limpieza y mantenimiento .................................................. 27 11.1 Pantalla ................................................................................................................... 27 11.2 Contactos de carga y comunicación ....................................................................... 27 11.3 Lector, cámara y ventana de luz de la cámara ....................................................... 27 12 Asistencia técnica y piezas de repuesto ..................................................... 28 13 Declaración de conformidad FCC .............................................................. 29 14 Declaraciones y garantías del fabricante ................................................... 30
 M260SE_Brief_Overview_FCC_V1.00_en_es.docx  3 / 33 1  Scope of Delivery The package contains the following items:  1   Device incl. battery 2   Replacement battery (optional) 3   Battery charger (optional) 4   Docking station (optional) 5   Connection kit for docking station – two parts (optional) 6   Brief overview M260SE Set (M260SE/DS260) (quick start manual)  Check package for completion and possible damages.   Figure 1: Package content    ATTENTION The M260SE battery is a lithium polymer battery pack. Lithium polymer battery packs can explode if exposed to fire. Do not disassemble the battery pack and do not expose it to fire or heat (greater than 140 °F).    ATTENTION Never position the device in close proximity to heat sources (heating fans or similar equipment) and never expose it to direct sunlight, excessice dust sources or shocks.    ATTENTION The touch pen may only be used for operation of the touch screen. It should not be used for any other purposes. 1 2 4 5 6 5 3
 M260SE_Brief_Overview_FCC_V1.00_en_es.docx  4 / 33 2  Intended Use The  M260SE  Set  (M260SE/DS260)  data  acquisition  system  is  a  solution  for  the  mobile  acquisition  and transfer of data.  Do not use the system in geographical areas where explosives may be used. Observe all warning information regarding the use of wireless devices. The supplied connection kit (see Point 1) is only intended for use with the M260SE Set.    NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can emit radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference with certain radio communications.    NOTE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.    NOTE Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
 M260SE_Brief_Overview_FCC_V1.00_en_es.docx  5 / 33 3  Handling   Read all instructions first before using the M260SE!   Do not drink any alcohol or take any drugs while using the M260SE and follow the saftey instructions carefully!   3.1  Prior to the initial Commissioning of the M260SE  In order to ensure that the battery inserted into the device at the factory is fully charged, insert the device into the supplied DS260 docking station (if included in the scope of delivery), also see  Section 3.2.  Using the supplied power supply unit, connect the docking station to the mains (Power LED shows a green light), also see Section 3.2.  The battery charging process has been completed when the 'CHARGE' LED is green.  You can now use the M260SE handheld terminal.  You can see the battery charging process in Figure 2.    ATTENTION Only original ACD power supply units and ACD-approved batteries may be used for the operation of the M260SE and the DS260. The utilization of non-approved components can lead to the destruction of the device. Remove the battery from the device if it is not used for an extended period of time.    ATTENTION The M260SE battery is a lithium polymer battery pack. Lithium polymer battery packs can explode if exposed to fire. Do not disassemble the battery pack and do not expose it to fire or heat (greater than 140 °F).    ATTENTION Prior to each use, the mobile data acquisition terminal, the docking station and the connection cables must be inspected for damages. Damaged parts must be replaced. Please contact ACD in either case.
 M260SE_Brief_Overview_FCC_V1.00_en_es.docx  6 / 33            1            2                3 Figure 2: Charging Process   1: 1. Faint Green LED:  Docking station has power and no device is inserted.  2:  1. Green LED:  Docking station has power and the device is inserted.   2. Red LED:  The battery in the device is charging.  3:  1. Green LED:  Docking station has power and the device is inserted.   2. Green LED:  The battery in the device is fully charged.
 M260SE_Brief_Overview_FCC_V1.00_en_es.docx  7 / 33 3.2  Handling of the Device and Docking Station   Read all instructions first before using the M260SE!   Do not drink any alcohol or take any drugs while using the M260SE and follow the saftey instructions carefully!   ATTENTION Only operate the touchscreen using the fingertips or with the touch-pen attached to the retainer strap on the rear. Never use a  pen or other sharp objects.   ATTENTION Never position the device in close proximity to heat sources (heating fans or similar equipment) and never expose it to direct sunlight, excessive dust sources or shocks.    ATTENTION In order to prevent excessive heat, the terminal, as well as the docking station and the power pack must not be covered while in use.   ATTENTION Make sure there is no risk of stumbling over connection cables or power packs.
 M260SE_Brief_Overview_FCC_V1.00_en_es.docx  8 / 33 3.2.1  Charging the Power Supply Unit for the DS260 & M260SE The M260SE and the spare battery may only be charged in the DS260 docking station with the respective power supply unit.   External power supply unit for DS260   Input voltage ~ 100 – 240 V AC; 0.8 A; 50 – 60 Hz   Output voltage   15 V DC; 2.4 A   Power cable (country-specific)   ATTENTION Unintended use of the interfaces should be avoided.  3.2.2  Replacing the battery in the Handheld Terminal M260SE The battery compartment is located on the rear of the device. In order to remove the battery, first remove the transverse hand strap by simply unhooking it. Now push the locking tab on the battery towards the battery surface (Figure 3.). The battery can now be removed from the tab. The battery can easily be inserted. In doing so, ensure that you insert the battery at a slight incline towards the contacts and hook it on the fixing tab whilst doing so. Then close the locking mechanism with a slight amount of pressure.            Figure 3: Inserting the Battery
 M260SE_Brief_Overview_FCC_V1.00_en_es.docx  9 / 33 3.2.3  Inserting the M260SE into the DS260   Figure 4: Inserting the M260SE into the DS260   3.2.4  Removing the M260SE from the DS260  Figure 5: Removing the M260SE from the DS260    ATTENTION Place the docking station correctly on a smooth and clean underground, which is not exposed to direct sunlight.
 M260SE_Brief_Overview_FCC_V1.00_en_es.docx  10 / 33 3.2.5  Switching on the M260SE Handheld Terminal In  order  to  switch  on  the  device,  press  the  “C”  button  and  the  “orange  enter”  button  to  the  right  of  “0” simultaneously until the LED beneath it lights up.  You can then release the buttons. The  desktop of your operating system or your usual work environment appears on the display.  You can see the buttons, you have to press to switch on the device as shown in Figure 6.    Figure 6: Switching on the M260SE   3.2.6  Suspend Mode In  suspend  mode,  the  operating  system  and  the  application  running  on  it  are  stopped.  The  display  is switched off and consequently becomes dark. Suspend mode can be accessed by simultaneously pressing the “C” button and the “orange enter” button to the right of “0”. Upon leaving suspend mode (switching on the M260SE),  the  application  and  the  operating  system  starts  to  run  from  the  same  point.  Thanks  to  both measures, the M260SE only uses a small amount of power.    Figure 7: Suspend Mode of the M260SE
 M260SE_Brief_Overview_FCC_V1.00_en_es.docx  11 / 33 3.2.7  Switching off the M260SE Handheld Terminal The device is switched off by pressing the three buttons “C”-, “” and “orange enter” right of the “0”, whereby the “0” button must first be pressed and held. Then also press and hold the “” button. Then also press and hold the “orange enter” button. Press and hold these three buttons for at least 10 seconds.    Figure 8: Switching off the M260SE   3.2.8  Status of the DS260 Docking Station LEDs The DS260 status LEDs are located on the front of the docking station.   Figure 9: Status of the DS260 LEDs  Die LED POWER leuchtet schwach grün, sobald die DS260 mit Spannung versorgt wird. Wird ein Handterminal M260SE in die DS260 eingelegt, dann leuchtet die POWER-LED heller, da sich die DS260 dann nicht mehr im Standbymodus befindet.  Die LED CHARGE leuchtet rot, wenn das M260SE geladen wird. Ist das M260SE geladen, so leuchtet die LED grün. Der Temperaturbereich zum Laden des M260SE Akku’s ist 0 °C bis 45 °C. In der DS260 ist ein Temperatursensor integriert. Wenn außerhalb dieses Bereichs versucht wird zu Laden, so wird dieses unterbunden und die CHARGE-LED blinkt rot.  Die LED CONNECT ist in der Version DS260 Standard ohne Funktion.   ATTENTION Unintended use of the interfaces should be avoided.
 M260SE_Brief_Overview_FCC_V1.00_en_es.docx  12 / 33  3.2.9  µSD card To expand memory space, you find a µSD card slot inside the device. The µSD card is accessible from the battery case.                Figure 10: Insert the µSD card into the µSD card slot  The microSD card may only be inserted  by a  briefed  person. First carefully lift the  black cover film using tweezers. The cover film strap, under which the microSD card slot is location, must be carefully folded over and retained in place. You have to insert the µSD card into the slot with contacts bottom-up. The card will be fixed if the card is locked noticeably. Then fold the cover film strap back over and run your finger over it in order to re-seal it. Afterwards  insert  the  battery  and  boot  the  M260SE.  Now  the  µSD  card  will  be  visible  in  the  Windows Explorer under the name SDMMCCard2.   ATTENTION Unintended use of the interfaces should be avoided.  3.2.10  RFID The RFID reader is available in two different designs:   HF RFID   LF RFID  The RFID reader is located on the top of the device, behind the black cover (see Fig. 11). In order to read an RFID tag, hold the device vertically and centrally over the RFID tag.             HF-RFID                      LF-RFID Figure 11: Position RFID reader
 M260SE_Brief_Overview_FCC_V1.00_en_es.docx  13 / 33 4  Cleaning and Maintenance Information  Turn off the device before starting any cleaning or maintenance process!   ATTENTION  Do not use any corrosive chemicals, cleaning solutions or strong cleaning agents in order to clean the device.    ATTENTION All components must be disposed of properly at the end of their technical lifetime.  Clean the device when dirty and by placing it firmly onto a surface (e.g. table). This ensures a secure hold and the device cannot slip out of your hand during the cleaning process.  4.1  Display Clean the display with a soft, dry cloth. In order to do, always switch off the device as the display responds to all contact and could therefore compromise or interfere with the active program.  Do not apply any severe pressure on the display.   4.2  Charging and Communication Contacts If transfer problems occur, clean the charging and communication contacts with a soft, moist cloth. When dealing with the DS260, the power plug must be disconnected beforehand.
 M260SE_Brief_Overview_FCC_V1.00_en_es.docx  14 / 33 5  Service and Spare Parts If you have service requests please contact:  Hegele Logistic, LLC 855 N. Wood Dale Rd., Suite A Wood Dale, IL 60191 United States Telephone: +1 847 690 0430 Fax: +1 630 354 6840 Email: repaircenter@hegelelogistic.com   If you require spare parts please contact:  ACD Elektronik GmbH Engelberg 2 88480 Achstetten Germany Telephone: +49 7392 708 499 Fax: +49 7392 708 490 Email: info@acd-elektronik.de      Use Original Spare Parts Only.
 M260SE_Brief_Overview_FCC_V1.00_en_es.docx  16 / 33 7  Manufacturer’s Representations and Warranties  ACD Elektronik GmbH         Engelberg 2           88480 Achstetten          Germany      Phone: +49 7392 708-0 Fax:     +49 7392 708-190   These  Representations  and  Warranties  are  applicable  to  all  customers  (the  “Customers”  and  each, individually, a “Customer”) purchasing products (the “Products”) manufactured by ACD Elektronik GmbH (the “Company”).      1.  Warranty and Limitations:  1.1.  Company warrants solely to the original purchaser of the Products that for the Warranty Period (as defined below), the Products will be free from defects in materials and workmanship under normal use, and will conform to Company’s published specifications of the Products. Notwithstanding the foregoing, Company retains its right to deviate from its published specifications due to the latest innovations and improvements in function and design of the Products.  1.2.  The foregoing warranty is subject to the proper storage, transportation and use of the Products, and does not include defects due to normal wear and tear or deterioration.   1.3.  Customer  shall  immediately,  but  in  any  event  no  later  than  eight  (8)  days  following  delivery  or installation  of  the  Product,  inspect  the  Products  for  conformity  and  visible  defects.    Customer  shall  give Company immediate written notice of any non-conformities or visible defects regarding the Products. In the event that Customer fails to provide the Company within eight (8) days following delivery or installation of the Products with notice of any non-conformities or visible defects, any warranty claims in this regard shall be deemed waived.   1.4.  Customer  shall  immediately  notify  Company  in  writing  of  any  other  defects  of  the  Products  and return  such  defective  Product.    Company’s  sole  obligation  under  the  foregoing  warranty is,  at  Company’s option, to replace or exchange the defective Product or issue a merchandise credit for the defective Product.  Any  replaced  or  exchanged  Products  shall  be  subject  to  the  warranty  set  forth  in  1.1.,  following  their replacement  or  exchange.    If  Company  has  received  notification  from  Customer,  and  no  defects  of  the Product could be discovered, Customer shall bear the costs that Company incurred as a result of the notice. It shall be in Company’s sole discretion to determine if the Product has a defect.   1.5. With  respect  to  orders  made  to  custom,  any  defects  of  the  Products  caused  by  Customer’s specifications are excluded from the warranty set forth in 1.1.   1.6.  Company also makes no warranty that the Products manufactured under an order made to custom do not infringe the intellectual property or other proprietary rights of any third party and Customer is solely responsible for assuring that such Products do not so infringe.  1.7. The “Warranty Period” begins on the date of delivery of the Product to Customer, and continues to be in effect for two (2) years.    1.8.  Company does not authorize any person or party to assume or create for it any other obligation or liability in connection with the Products except as set forth herein.
 M260SE_Brief_Overview_FCC_V1.00_en_es.docx  17 / 33  1.9.  All requests and notices under this Warranty shall be directed to:  ACD Elektronik GmbH Engelberg 2 88480 Achstetten Germany Phone: +49 7392 708-0  Email: info@acd-elektronik.de  1.10.  THE WARRANTY SET FORTH IN SECTION 1.1 IS MADE IN LIEU OF ALL OTHER WARRANTIES (WHETHER  EXPRESS OR IMPLIED), RIGHTS OR CONDITIONS, AND  CUSTOMER ACKNOWLEDGES THAT EXCEPT FOR SUCH LIMITED WARRANTY, THE PRODUCTS ARE PROVIDED “AS IS.” COMPANY SPECIFICALLY  DISCLAIMS,  WITHOUT  LIMITATION,  ALL  OTHER  WARRANTIES,  EXPRESS  OR IMPLIED,  OF  ANY  KIND,  INCLUDING,  WITHOUT  LIMITATION,  THE  IMPLIED  WARRANTIES  OF MERCHANTABILITY  AND  FITNESS  FOR  A  PARTICULAR  PURPOSE,  NON-INFRINGEMENT,  AND THOSE WARRANTIES ARISING FROM A COURSE OF PERFORMANCE, A COURSE OF DEALING OR TRADE USAGE.   2.  Limitation of Liability:  2.1.  IN  NO  EVENT  SHALL  COMPANY  BE  LIABLE  FOR  ANY  INDIRECT,  INCIDENTAL,  PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF  PROFITS,  REVENUE,  GOODWILL  OR  USE, INCURRED  BY CUSTOMER  OR  ANY  THIRD  PARTY, WHETHER IN AN ACTION IN CONTRACT, TORT, STRICT LIABILITY, OR IMPOSED BY STATUTE, OR OTHERWISE, EVEN IF  ADVISED OF  THE POSSIBILITY OF SUCH DAMAGES. COMPANY’S LIABILITY FOR DAMAGES ARISING OUT OF OR IN CONNECTION WITH THIS AGREEMENT SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCTS. IT IS AGREED AND ACKNOWLEDGED THAT THE  PROVISIONS  OF  THIS  AGREEMENT  ALLOCATE  THE  RISKS  BETWEEN  COMPANY  AND CUSTOMER,  THAT  COMPANY’S  PRICING  REFLECTS  THIS  ALLOCATION  OF  RISK,  AND  BUT  FOR THIS  ALLOCATION  AND  LIMITATION  OF  LIABILITY,  COMPANY WOULD  NOT  HAVE  ENTERED  INTO THIS AGREEMENT.  2.2.  IN JURISDICTIONS THAT LIMIT THE SCOPE OF OR PRECLUDE LIMITATIONS OR EXCLUSION OF REMEDIES OR DAMAGES, OR OF LIABILITY, SUCH AS LIABILITY FOR GROSS NEGLIGENCE OR WILLFUL  MISCONDUCT  OR  DO  NOT  ALLOW  IMPLIED  WARRANTIES  TO  BE  EXCLUDED,  THE LIMITATION  OR  EXCLUSION  OF  WARRANTIES,  REMEDIES,  DAMAGES  OR  LIABILITY  SET  FORTH ABOVE  ARE  INTENDED TO APPLY  TO THE MAXIMUM EXTENT  PERMITTED BY APPLICABLE LAW.  CUSTOMER  MAY  ALSO  HAVE  OTHER  RIGHTS  THAT  VARY  BY  STATE,  COUNTRY  OR  OTHER JURISDICTION.

Navigation menu