ACE BAYOU DUAL21DL X ROCKER CHAIR User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4123280
Application ID	xqFv5igRpGXslr1WwOEiMg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	231.01kB (2887638 bits)
Date Submitted	2018-12-29 00:00:00
Date Available	2018-12-29 00:00:00
Creation Date	2018-06-21 13:39:45
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-08-20 10:20:55
Document Title	Users Manual
Document Creator	Adobe Illustrator CS3

Evo Pro
User Manual Item no: 5152501
Need Help? Email: Service@XRockerNation.co.uk
Phone: 01274 683 109 www.XRockerNation.co.uk
IMPORTANT: You must keep your original retail receipt as proof of purchase.
Welcome to X Rocker!
Thank you for purchasing this X Rocker gaming
chair. You are now close to enhancing your
favourite games with glorious audio!
To get started, please assemble the chair using
the assembly instructions on the separate leaflet
and then follow the instructions in this manual to
get rocking!
Table of contents
ϯ
ϰ
ϱ
ϲ
ϳ
ϴ
ϵ
ϭϬ
Box contents and control panel overview
Wireless Connection guide: TV (All consoles)
Wired Connection guide: TV (All consoles)
Connect by controller (PS4 systems only)
Bluetooth Connection Guide
Troubleshooting tips
Health and safety information
Power supply safety information
B
9.84ft/3m
0.492ft/0.15m
B1 - 3m 3.5mm to 3.5mm Audio cable
B2 - 15cm RCA to female 3.5mm audio cable
+ B1
+ B2
B3 - RCA female to female adapters
B4 - 0.15m 3.5mm to 3.5mm Audio cable
B5 – Power Supply Cable
0.5ft/0.15m
+ B3
+ B4
+ B5
+ B6
B6 – Wireless Transmitter
Control panel overview
Wireless connection guide: TV
(All consoles)
To connect using the wireless transmitter, connect the Wireless
transmitter (B6) to your TV set using the 3.5mm to 3.5mm cable (B1)
TV/Mobile/Tablet
B1
Once connected, Set the control panel on the chair and the Wireless
transmitter to the same band (1,2,3)
To get the best sound, make sure that the volume on the TV is set to
approximately 50% of the maximum. Depending on the TV you may need
to set the volume level separately in the TV sound settings menu. (Please
refer to TV manual for guidelines.)
Wired connection guide: TV
(All consoles)
TV/Mobile/Tablet
B1
1. Connect B1 Cable to X Rocker control panel MP3 INPUT sockets.
2. Connect other end of B1 3.5mm end into the headphone socket of
your television.
3. Once connected to your TV, increase volume to 50% of the maximum
for the best sound level. **
** Depending on your TV you may need to increase the headphone
volume separately in the TV sound settings.
Connect by controller:
(PS4 systems only)
B1
1. Connect the B1 cable to the bottom of the PS4 controller via the
headset socket.
2. Connect the other end of the B1 cable to the chair via the green port.
3. With the PS4 turned on, go to the main menu (or locate the main
menu screen). Press and hold the PS button on the PS4 controller until
the quick menu appears on screen.
4. In this menu select [Adjust sound and devices]
5. Then select [output to headphones]
6. Change the setting from [Chat Only] to [All audio]
7. Make sure the volume in the previous menu is set to the maximum.
8. Set the control panel Wireless switch to the ‘OFF’ position.
Bluetooth connection guide
Step 1:
Switch the X Rocker Avanti’s wireless switch to the Bluetooth position.
Step 2:
On the Audio output device
go into its Bluetooth settings,
turn Bluetooth on if it is not
on already and search for
XROCKER. Upon finding this,
select the XROCKER option.
If a passcode is required the four
digit code will be ‘0000’.
Troubleshooting tips
Issue
Troubleshooting steps
No power going to control panel
• Make sure that the power cable is
connected correctly.
• Make sure that the power supply at the
power source is working correctly.
• With the chair turned to the ON position,
give the power cable a slight wiggle in the
port. If any lights flicker (or not)
then please contact support (details below).
No sound
• Review the connection methods on
the previous page and try alternative
connection methods if possible.
• Confirm that the device/system is
correctly configured as per previous
connection guide.
• Make sure that the wireless channel
switcher is in the corresponding position
that suits your connection method.
(1,2,3 for wireless and AUX for wired
connections).
Wireless transmitter cuts out during
gameplay/No vibration or subwoofer
sound via analogue connection
• Please make sure that the volume of
the source device is at a higher level to
strengthen the audio signal.
The cables connected to my
X Rocker have been broken
accidentally
• Please contact X Rocker support
(service@XRockerNation.co.uk) regarding
this issue.
Interference over wireless connection
• In this case, try another of the three
wireless bands to isolate the signal.
Health and safety information
• Avoid immersing or allowing the X Rocker to come into contact
with liquids.
• Please consult X Rocker Support before unscrewing any of the electrical
components on the chair.
• Please be mindful of any cabling laid out between the X Rocker and
power source/audio device.
• Please be mindful of cabling attached when moving/swivelling
the X Rocker.
• If the cables or electrical equipment are broken then this may present
a choking risk, please contact Support for replacements and dispose of
these parts safely.
• Do not stand on the X Rocker or exceed the 120kg weight limit via
other means.
• Do not lean back on the chair to the point in which the pedestal would
lift off the ground.
• X Rocker armrests are designed for support and comfort during
gameplay, please do not use these as support for getting in/out of
the chair.
• Playing audio for long periods at loud volumes may contribute to
difficulties in hearing.
• Please be considerate to others when playing audio through the
X Rocker speakers at higher volumes.
ATTENTION:
A. For Power Adapter, the apparatus shall not be exposed to dripping
or splashing and that no objects filled with liquids, such as vases,
shall be placed on the apparatus;
B. For Power Adapter, the MAINS plug is used as the disconnect device,
the disconnect device shall remain readily operable;
by manufacturer.
Power Supply unit trademark: BI;
Model name: 36-090300-AdU;
Input: AC100-240V~50/60 Hz, 1.2A;
Output: DC 9V---3
Where you see the Crossed Out Wheelie Bin symbol it means that this product can
be recycle and should not be disposed of in normal household rubbish. If you are in
the EU, please take it to a collection point for the disposal of Waste Electrical and
Electronic Equipment (WEEE) for recycling. For all other countries please adhere
to local recycling laws for electrical and electronic equipment. The recycling and
processing of Waste Electrical and Electronic Equipment will make a significant
contribution towards helping protect the enviroment by reducing landfill waste.
Product complies with the European Safety Regulations
10
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
FCC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IC
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts. L'exploitation
est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas causer d'interférences, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
IC Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Déclaration d’IC sur l’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux radiations définies par le Canada pour des environnements
non contrôlés.
Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre antenne ou un autre émetteur.
Need Help? Email: service@acecasual.com Web: www.xrockernation.com Phone: 866-969-2603
Need Help? Email: Service@XRockerNation.co.uk
Phone: 01274 683 109
www.XRockerNation.co.uk
IMPORTANT: You must keep your original retail
receipt as proof of purchase.
Declaration of Conformity
We
ACE BAYOU CORP
(Name of Applicant or his authorized representative)
1340 Poydras Street Suite 1870 New Orleans, LA 70112 USA
(Address)
Declare under our own responsibility that the product
Product description : X ROCKER NEW EVO PRO
Model : 5152501
(Model, descriptions, versions, supplementary characteristics)
to which this declaration refers conforms with the relevant standards or other
documents
EN 301 357 V2.1.1, EN 301 489-9 V2.1.1
(Titles, dates of publication of documents mentioned)
According to the regulations in RED 2014/53/EU
(if necessary: directives, main regulations)
2018-8-01
(Place, date)
Alei Cao
(Name and signature of person responsible)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Has XFA                         : No
Language                        : en-GB
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Create Date                     : 2018:06:21 13:39:45+01:00
Metadata Date                   : 2018:08:20 10:20:55+08:00
Modify Date                     : 2018:08:20 10:20:55+08:00
Creator Tool                    : Adobe Illustrator CS3
Thumbnail Width                 : 184
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 10283 bytes, use -b option to extract)
Instance ID                     : uuid:4d3b3e1f-f210-4717-b395-70698b4f291e
Original Document ID            : xmp.did:55eee949-ae38-4c03-9546-b92fc41e48cb
Document ID                     : xmp.id:25917dfc-fe99-4a5b-8ab5-280562028d6a
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:4e02762d-b087-4990-a4b8-e2bd96c10a78
Derived From Document ID        : xmp.did:8053a353-2c83-4012-af39-3edfbe94c9fa
Derived From Original Document ID: xmp.did:55eee949-ae38-4c03-9546-b92fc41e48cb
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Macintosh)
History Changed                 : /
History When                    : 2018:06:21 13:39:45+01:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : True
Max Page Size W                 : 419.528015
Max Page Size H                 : 595.276001
Max Page Size Unit              : Points
Font Name                       : Calibri, ArialMT
Font Family                     : Calibri, Arial
Font Face                       : Regular, Regular
Font Type                       : Open Type, Open Type
Font Version                    : Version 6.21, Version 7.00
Font Composite                  : False, False
Font File Name                  : calibri.ttf, arial.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Group Name               : 默认色板组
Swatch Group Type               : 0
Page Count                      : 13
Creator                         : Adobe Illustrator CS3

EXIF Metadata provided by EXIF.tools