ACE CAD Enterprise PP01 Pen Paper User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3122130
Application ID	WlEBhtbbr7sNqpKnsPjGXQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	45.21kB (565179 bits)
Date Submitted	2016-09-03 00:00:00
Date Available	2016-09-03 00:00:00
Creation Date	2016-09-02 10:33:55
Producing Software	Adobe Acrobat Pro 11.0.0
Document Lastmod	2016-09-02 10:33:55
Document Title	Users Manual
Document Creator	Adobe Acrobat Pro 11.0.0
Document Author:	Henry

PenPaper 5x8 Digital Notepad for iPad
User Guide
Getting Started
The PenPaper digitally captures and sends everything you write or draw by using
pressure sensitive, battery-free and digital pen with ink on ordinary paper to your iPad in
real time via Bluetooth. With PenPaper Note App, select pen functions and view, edit,
organize and share your handwritten notes on your iPad.
In Windows, it is a Bluetooth tablet device supporting the Ink Tools in Microsoft Office.
Equipment Checklist
The following items are included in your PenPaper package:

Digital Pad

Battery-free & Pressure Sensitive Digital Inking Pen (DigiPen P200)

5” x 8” Paper Notepad (already held on the digital pad)

Three Replacement Ink Cartridges

USB Charge Cable

User Guide
The Parts of the PenPaper
Notepad Clip
USB Charge Connector
Left LED
Right LED
Power Button
Upper Boundary of
the Writing Area
Notepad
Holder
Upper
Button
Lower
Button
Tip
Digital Pad
www.acecad.com.tw
Digital Inking Pen
Charge the digital pad battery
Use the included USB charge cable to connect digital pad to an USB power adapter or
to your computer to charge the digital pad battery.

Charging: the right red LED lights up.

Full Charge: the right red LED turns off.

Low Battery: the right red LED slowly flashes.
Note!
You need to use a DC 5V USB power adapter to charge. (Such as USB power
adapter of your iPad or mobile phone.)
Note!
The full charge battery of digital pad lasts about 8 hours with continuous use.
Two Working Modes of PenPaper
Slide the switch on the right side of the digital pad to switch
the working mode of PenPaper.
Slide
Switch

Writing Mode for iPad: The switch is on the lower
position for working with the PenPaper Note App in
your iPad.
HID Tablet
Mode

HID Tablet Mode for Windows: The switch is on the
upper position for being a Bluetooth tablet device in
Windows, supporting the Ink Tools in Microsoft Office.
Writing
Mode
Paper Notepad, the Writing Area and Thickness

Paper Notepad: Use its notepad clip to hold a paper notepad in the notepad holder.

Writing Area and Thickness: Use a 5" x 8" paper notepad up to about 50 sheets
of paper whose thickness is the maximum writing thickness about 6 mm (0.236").
The writing area is within the notepad holder but its upper boundary is indicated by
the carving lines on the digital pad.
Turn PenPaper On or Off

Turn it On: Hold down the Power button until the right blue LED lights up. Then the
PenPaper is waiting for connection and the right blue LED rapidly flashes.

Turn it Off: Hold down the Power button until the right blue LED turns off.

Auto-Shutdown: If you have not use or put the digital pen on the digital pad within
the previous 30 minutes, the PenPaper automatically shuts down.
Use the PenPaper with the App in iPad
The Writing mode of PenPaper
To use the PenPaper with the App in iPad, the slide switch on the right side of the digital
pad must be slid to the writing mode of PenPaper.
Install PenPaper Note App in your iPad
Use “ACECAD”, “PenPaper” or “PenPaper Note” word to search for
PenPaper Note App in the App Store. Install the Free App. Then the App icon
named “PenPaper Note” appears on your iPad screen.
Pair your PenPaper with the PenPaper Note App
Before you can use the PenPaper with the App in your iPad, the PenPaper has to be
paired once with the PenPaper Note App.
1.
Open the PenPaper Note App
on your iPad.
2.
Tap the Pair tool
3.
Follow the instructions in the dialog to pair your PenPaper with the App.
Connect your PenPaper to the PenPaper Note App via Bluetooth
After you turn on the PenPaper, the App will connect to the paired PenPaper via
Bluetooth by the following actions:

Open the PenPaper Note App.

Open a Book file on the Bookshelf in the App.

Tap the Connect tool
on the digital page in the App.
Note!
When connecting, the Connect tool
and the Pair tool
blue, and the right blue LED on the digital pad slowly flashes.
in the App are
Note!
When disconnecting, the Connect tool
and the Pair tool
in the App are
gray, and the right blue LED on the digital pad rapidly flashes or turns off.
Use the connected PenPaper to write or draw with the App
To use the PenPaper with the App, the App must connect to the PenPaper via
Bluetooth.
1.
On the iPad, tap the App to open it.
2.
Tap the Add tool
3.
Tap a book file to select it. The selected book file will be surrounded by the orange
frame.
4.
Tap the selected book file or double-tap the unselected book file to open it.
to create a new book file.
5.
The current digital page in this book file will be displayed on the screen.
6.
The paper notepad within the writing area on the digital pad corresponds directly to
the current whole digital page.
Tip!
Your handwriting or drawing on the PenPaper is displayed in its App according
to the options you select in its App, such as pen style, color and line width.
The Pen tools in the App support the digital inking pen of the PenPaper.
The pen tools include the Pressure Sensitive Pen tool
tool
Tip!
7.
and the Pencil tool
, the Regular Pen
By using the PenPaper to write or draw, your handwriting and drawing is very
fine and precise, with the perfect pressure sensitive performance.
Tap a Pen tool. Using the digital pen to write or draw on the paper notepad holed on
digital pad, your handwriting or drawing will be displayed in real time on the current
digital page in the App.
Tip!
Please refer to the Tip tool
in the App for more functions.
Tip!
The Upper button of the digital pen is the same as the Redo tool
Tip!
The Lower button of the digital pen is the same as the Undo tool
Note!
When you write by using the digital pen, don’t press the upper or lower button
of the digital pen.
Note!
Don’t use the digital pen to write or click on the iPad screen.
In-Range to write or draw
In-Range: When you bring your digital pen close to the paper notepad within the writing
area on the digital pad, the left green LED lights up and a red point appears on the
current digital page in the App.
When you bring your digital pen In-Range, you can write or draw on the paper notepad,
the left red LED lights up and your handwriting or drawing will be displayed in real time
on the current digital page in the App.
Note!
If you put the digital pen to the paper notepad quickly from a higher position
than the In-Range, your handwriting or drawing may not be captured to the
current digital page in the App.
Use the PenPaper with Windows
Slide
Switch
The HID Tablet mode of PenPaper
To use the PenPaper with Windows, the slide switch on
the right side of the digital pad must be slid to the HID
Tablet mode of PenPaper.
HID Tablet
Mode
Writing
Mode
Pair your PenPaper with Windows
Before you can use the PenPaper with Windows, the PenPaper has to be paired once
with Windows.
1.
Turn off the digital pad.
2.
Press and hold the Power button on the digital pad (about 3 seconds) until the right
blue LED rapidly flashes.
3.
In your Windows, add the PenPaper HID as a Bluetooth device.
4.
When successfully paired, the PenPaper will be connected to Windows and the
right blue LED slowly flashes.
Bluetooth HID Tablet Device in Windows
When connecting, the PenPaper is a Bluetooth HID
tablet device in Windows and for all Windows
applications. You can use the digital pen on the writing
area of the horizontal pad to move the mouse pointer on
the screen.
Writing area of the
horizontal pad
The writing area of the horizontal pad corresponds
directly to the whole screen. For example, if you move
the pen to the lower-left corner of the horizontal writing area, the mouse pointer will
move to the lower-left corner of the screen.
The button actions of the pressure sensitive digital pen
The actions of the pen pressure sensing tip, upper and lower buttons, of the digital pen
is defined by Windows. When connecting, you also can find and refer to Pen and Touch
dialog in the Control Panel.
For example, the actions are shown below:
Primary Barrel Button:
Pressure Sensing Tip:
Hold the button down
then tap the digital pad
(as Mouse Right-click).
Single-tap (as Mouse Single-click)
Double-tap (as Mouse Double-click)
Press and hold (as Mouse Right-click)
Eraser Button:
Hold the button down then use
the pen tip to erase on digital pad.
Support the Ink Tools in Microsoft Office
When connecting, the Ink Tools will be activated in Microsoft Office when you use the
digital pen on the digital pad.
Pressure Sensitive function compatible with Windows
The pressure sensitive function of the digital pen is compatible with Windows without
any additional driver. The function is available only for the applications supporting this
specification offered by Windows.
For example: Microsoft Office and Adobe Photoshop CC.
Appendixes
Replace the Cartridge of the Digital Pen
To replace the cartridge of the pen, you may use a small clip to
gently pull the old one out. Then insert a new one and press the
cartridge tip firmly against a hard surface until it snaps into place.
Purchase New Replacement Ink Cartridges
The specification of ink cartridge used for the digital pen is 2.3 mm/0.09" (Diameter) x
67 mm/2.64" (Length).
Note!
The material of some ink cartridges may affect the performance of the digital
pen. Some ink cartridge with the different outside dimensions may damage the
digital pen.
Note!
The following ink cartridges have been tested and approved for use with the
digital pen:
Brand
ACECAD
Cross
Lamy
Sterling (Target)
SPALDING
STAEDTLER
Parker
Monteverde
Pelikan
Retro 51
Aurora Mini
Model
Ink Cartridge Series
8518-1
M21
01800T
RFR80A
930-ASBK3V
Ballpoint Pen Refill
D-1 Size Soft Roll
Refill 38
D-1 Size
Medium Point
Specifications
Digital Pad Specifications
Size
Width 6.02" (153mm) x Length 9.92" (252mm)
Thickness
The thinner part 0.228" (5.8 mm)
The thicker part 0.339" (8.6 mm)
Weight
Approx. 7.2 oz. (204 g) with rechargeable battery
Writing Area
5" x 7"
Writing Thickness
0.236" (6mm); approx. 50 sheets of paper
Notepad Holder
Holder for 5" x 8" size paper notepad
Battery Life
8 hours.
Power Source
Li-Polymer battery with UL1642 Authentication.
Wireless Connectivity
Bluetooth Smart
Digital Inking Pen Specifications
Size
130 mm (length) x 10.4 mm (diameter)
5.12" (length) x 0.41" (diameter)
Pressure Sensitive Levels
1024 Levels
Weight
12 g (0.42 oz.)
iPad Requirements
Equipment
iPad (3rd, 4th generation) / iPad Air series / iPad mini
series / iPad Pro series with Bluetooth Smart technology
iOS Operating System
iOS 8 or later
Windows Requirements
Windows Operating System
Windows 7 or later with Bluetooth Smart technology
Microsoft Office
Office 2010 or later
Environment
Operating Temperature
0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity
Less than 85% (no condensation)
Storage Temperature
-20 °C to 60 °C (-4 °F to 140 °F)
Note!
These specifications are subject to change without notice.
Trademark Information
ACECAD is a registered trademark of ACE CAD Enterprise Co., Ltd.
The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such
marks by ACE CAD Enterprise Co., Ltd. (ACECAD) is under license.
Other trademarks and trade names are those of their respective owners.
Copyright Notice
© 2016 ACE CAD Enterprise Co., Ltd. All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording, or
otherwise), without the prior written permission of the publisher.
Part Number: 91100-41520
English Version v1.0
Printed in Taiwan 2016.08
Federal Communications Commission (FCC) Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
FCC RF Radiation Exposure Statement:
1.
This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your
body.
Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Industry Canada - Class B This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus,”ICES-003 of Industry
Canada.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotopically radiated power (e.i.r.p.) is not more than that permitted for successful communication.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur
de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de Classe B
prescrites dans la norme sur le matérial brouilleur: “Appareils Numériques,” NMB-003 édictée par l’Industrie.
L'opération est soumise aux deux conditions suivantes: (1) cet appareil ne peut causer d'interférences, et (2) cet appareil doit
accepter toute interférence, y compris celles susceptibles de provoquer fonctionnement du dispositif.
Afin de réduire les interférences radio potentielles pour les autres utilisateurs, le type d'antenne et son gain doivent être
choisie que la puissance isotrope rayonnée équivalente (PIRE) est pas plus que celle premise pour une communication
réussie.
Part Number: 91100-41530
English Version v1.0
Printed in Taiwan 2016.08
ISED statement
This device complies with ISED Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR ISED Canada applicables aux appareils radio
exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
This device complies with RSS 247 of ISED Canada. This Class B device meets all the
requirements of the Canadian interference-causing equipment regulations.
Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
RF exposure statement:
ISED Canada Radiation Exposure Statement
This equipment complies with ISED Canada RSS-102 radiation exposure limit set forth for an
uncontrolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator and your body.
Déclaration d’exposition à la radiation : Cet équipement respecte les limites d’exposition
aux rayonnements ISED Canada définies pour un environnement non contrôlé. Cet
équipement doit être installé et mis en marche à une distance minimale de 20 cm qui sépare
l’élément rayonnant de votre corps.
L’émetteur ne doit ni être utilisé avec une autre antenne ou un autre émetteur ni se trouver à
leur proximité.
CAN ICES (B)/ NMB-3 (B)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Henry
Create Date                     : 2016:09:02 10:33:55+08:00
Modify Date                     : 2016:09:02 10:33:55+08:00
Title                           : 
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2016:09:02 10:33:55+08:00
Creator Tool                    : Adobe Acrobat Pro 11.0.0
Format                          : application/pdf
Creator                         : Henry
Document ID                     : uuid:0c91c201-3043-42dc-bb2a-03e0e1f8b82c
Instance ID                     : uuid:17491dc5-496a-414c-be55-31bb494bd6b1
Producer                        : Adobe Acrobat Pro 11.0.0
Page Count                      : 10

EXIF Metadata provided by EXIF.tools