AcoustMax ALLMGR Portable Bluetooth LED Speaker User Manual

ACOUSTMAX INTERNATIONAL CO., LTD Portable Bluetooth LED Speaker Users Manual

Users Manual

MMAANNIIWWAAYY SSMMAARRTT LLAAMMPP SSPPEEAAKKEERR IInnssttrruuccttiioonn MMaannuuaall PLEASE READ BEFORE OPERATING THIS EQUIPMENT. Model: MW-L1
IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. Water and Moisture The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a set basement. Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings. Heat The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. Power Source The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cord exits the unit to where it is plugged into an AC outlet. Cleaning The unit should be cleaned only as recommended. Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. Attachments Do not use attachments not recommended by the product manufacturer. Lightning and Power Surge Protection Unplug the unit from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. Overloading Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire of electric shock. Damage Requiring Service This unit should be serviced by qualified service personnel when: The power supply cord or plug has been damaged. Objects have fallen into or liquid has been spilled into the enclosure. The unit has been dropped or the enclosure damaged. The unit exhibits a marked change in performance or does not operate normally. Periods of Nonuse If the unit is to be left unused for an intended period of time, such as a month or longer, the power cord should be unplugged from the unit to prevent damage or corrosion. Servicing The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. PACKAGE CONTENTS 1 x LED Bluetooth Speaker 1 x AC-DC Adapter 1 x 3.5mm Audio Cable 1 x Instruction Manual
LOCATION OF CONTROLS Front View Bottom View Top View
1. LED/Volume control button a. Short tap this button continously to change the color of LED light, then rotate it within 2 seconds to adjust brightness of the light.   b. In Bluetooth playback mode: rotate it to adjust the volume, press and hold this button（> 2 seconds ) to play/pause current playback. c. In Bluetooth mode: when receiving an incoming call on your cell phone, tap this button once to answer the phone, tap this button again to end the call. 2. Lamp shade 3. Built-in microphone 4. Power On/Off button Press and hold this button to turn the unit On or Off. Short press to switch on/off the light during power on mode. 5. DC Jack(12V, 1.5A) 6. Aux-in Jack 7. USB charging socket (Output: 5V,1A) 8. Operating mode indicator Start-Up of the Device/Introduction Choose a suitable location for the device. Suitable would be a dry, level, non-slip surface. CAUTION: Do not carry the device by the control knob! Power Supply The unit is powered by an external AC-DC power adapter with an output of 12V DC / 1.5A (included). 1. Make sure the grid voltage corresponds to the figures on the rating plate. 2. Connect the device with the plug connector by inserting its plug into the "DC 12V" jack of the device. 3. Insert the grid plug into a properly installed three prong socket. CAUTION: Only use the supplied power adaptor for this device. Do not use for other devices. Only use power adaptor with 12V（ ）other adaptors may cause damage to the device. NOTE: Disconnect from mains power supply during longer periods of non-use.
USB Charging Socket You can charge your smartphone through this jack. Use the USB cable of your smartphone for the connection. NOTE: -Due to the different smartphone types that are offered today, and their different charging capacities, the loading duration is dependent on the smartphone used and its operating condition. -Due to the design only a power supply of 1A can be ensured. Devices such as tablets PCs that need charging currents of up to 2500mA, cannot be charged. -A playback of audio-files through this connector is not possible App Information: You can also download the appropriate app to this device on your smartphone or tablet PC. The app gives you additional control options (amongst others, 3 alarm times and a sleep timer). The iLink app is available for android and iOS. Scan the corresponding QR code to go directly to the download. NOTE: Depending on the provider, downloading the app may require payment. Google Play App Store Important Note for Operation via App Once you are connected as described in the chapter “Playing Back Music Files” “Wireless via Bluetooth” you must connect the app with the device. 1. Open the app. 2.Click on the icon menu (1). 3.Select the menu item for the Bluetooth connection(2). 4.Should the device not appear in the list, click the search icon 5.Connect the app with the device by clicking on “AKBT80 Light”. 6.Now you can operate the device using the app.
Basic Operation 1.Turn on the unit by pressing and hold the button on the bottom of the unit,the LED light will be on,meanwhile, the Operating mode indicator will flash in blue 2. Short tap the LED/Volume control button once, then rotate it to adjust brightness of the LED light. 3. Short tap the LED/Volume control button continously to change the color of LED light in the following cyclical manner: White—> Warm White—>Green—>Cyan—>Purple—>Blue—>Color Auto change 4. Short press the button on the to switch off/on the LED light 5.Press and hold the button to turn the unit off. OPERATING THE SPEAKER IN BLUETOOTH MODE This device offers you the possibility to use a Bluetooth enabled device. The functional radius is limited to approx.10 metres depending on the surroundings and the unit used. Due to the different device manufacturers, models, and software versions, a full functionality cannot be guaranteed. Pairing (Linking) A Bluetooth Enabled Cell Phone or Other Bluetooth Enabled Device To The Speaker If the speaker has never been paired with a Bluetooth device before, you need to follow the pairing instructions below to link the speaker with your Bluetooth device. 1. When the speaker is turned on, the Operating mode Indicator flashes in blue. The speaker is ready to pair (link) with your Bluetooth device. 2. Activate Bluetooth on the compatible device, and set it to search for compatible devices. 3. Select the speaker name:" MW-L1" from the list of found devices. Tips: Only one playback unit can be connected to the speaker. If the speaker is already connected to another playback unit, the speaker will not appear in the BT selection list. 4. If your device asks for a passkey (depending on the device manufacturers, model, and software version), then enter digits “0000” (four zeros) and press OK. 5. If pairing has been carried out successfully, a beep sound is heard, meanwhile, the Blue colour indicator stops flashing. If the speaker has been paired with the Bluetooth device before, you need to follow the pairing instructions below to link the speaker with your Bluetooth device. 1. After turning on the speaker, the speaker will search for the last paired device. The operating mode indicator will flash in blue. If the unit finds the paired Bluetooth device, a beep sound is heard and operating mode indicator will keep in blue and stop flashing. 2. After successfully pairing (linking), you can begin playing music from your Bluetooth device wirelessly to the speaker.
3. Rotate the LED/Volume control button to adjust the volume to adjust to the desired volume level, while the volume level reaches its maximum level, a “di” sound will be heard. 4. Press and hold the LED/Volume control button for 2 seconds to play/pause current playback. 5. To stop the unit, press and hold the button to turn the unit off. NOTES:  To be able to transfer audio data, Bluetooth needs to stay activated in your player, observe the operation manual of your player.  If a mobile phone on which you are playing music receives a call, the music will be interrupted. The sound however is not played back via the speaker. After you have ended the call, the devices are connected to each other again and playback continues.  The player will be disconnected when your device is moved beyond the operational range. If you want to reconnect your device to this player, place it within the operational range.  If the device is moved beyond the operational range, when it is brought back, please check if the device is still connected to the player.  If the connection is lost, follow the instructions above to pair your device to the player again. Using the Unit as a Hands-free Bluetooth Speakerphone 1. Link your cell phone to the LED speaker via Bluetooth as described above. 2. When receiving an incoming call on your cell phone, short tap the LED / Volume control button on the unit to switch the incoming call from cell phone to the speaker. Complete your call using the built-in microphone and speaker. 3. Adjust the volume control of your cell phone to obtain the desired sound level. 4. To end the call, just tap the LED / Volume control button again, the call will end. If you were playing music from your cell phone to the speaker before answering the call, the music will automatically resume playing when you hang up.
OPERATING THE SPEAKER IN AUX-IN MODE If you are using an iPod, MP3/MP4 player or other mobile phone which cannot connect this unit via Bluetooth directly, you can still play it on the speaker via an audio connecting cable. 1. Plug one end of the 3.5mm audio cable (included) into the headphone or line out jack on your player; plug the other end of cable into the unit AUX-IN jack of the speaker. 2. Turn on the external audio source and play your device. 3. Press and hold the button to turn on the unit, the operating mode indicator will light up in Red. 4. The volume level can now be controlled through the main unit. Operate all other functions on the external device as usual. Notes: 1. If you're connected to the Line out Jack of your external device, then you only need to adjust the volume control of this speaker. If you're connected to the Headphone Jack of your external device, then you may need to adjust both the volume control of your external device and the volume control of this unit to find the most desirable volume setting. 2. Press the Power ON/OFF button to turn off the unit when you finish listening. 3. Don't forget to switch off the power of your external device as well. Troubleshooting Guide Should you experience difficulties in the use of this player, please refer to the following chart. Fault Cause Solution Unit cannot be operated. Unit crashes and “hangs” Disconnect from the mains for around 5 seconds. Then switch the unit on again. No audio signal via the Bluetooth connection Speaker is not paired to the audio source. Check whether a connection exists. If necessary, pair the speaker again to the audio source. Volume too low Increase the volume on the speaker Increase the volume on the audio source. Speaker cannot be connected Pairing does not work Check whether the audio source supports the A2DP protocol Audio source is switched off Switch on the audio source Bluetooth is switched off at the audio source. Switch on the Bluetooth function in the audio source. Bluetooth version is not supported. Use a different playback unit. Poor sound quality from a Bluetooth® device Bluetooth device is almost out of range of the LED speaker Move your Bluetooth device closer to the LED speaker
Specification Power adaptor (included) Input AC 100-240V ~ 50/60Hz Output DC 12V1.5A Power Consumption 19W Standby Power Consumption <0.5W Output Power(RMS) 10W Frequency Response 40Hz-18KHz Signal to Noise Ratio (SNR) > 80dB Bluetooth Version V 4.0 Bluetooth operation range Up to 10 metres, straight line distance and no obstacles LED Numbers 18 (White)/18 (Warm White)/ 9 (RGB) Working Temperature 0℃~ +35℃ Working Humidity 20%~80% The right to make technical and design modifications in the course of continuous product development remains reserved. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
LLUU UUMMIINN,,PLEA,, PPoorrttaIInnASE READAAMM Laabbllee LLnnssttrruuccD BEFORE LLiiffeesstt LLEEDD BB ccttiioonn MME OPERATttyylleess BBlluueettooMMaannuuTING THISooootthh SSaall S EQUIPMMoSSppeeaakkENT. odel: AL-Lkkeerr LMGR
IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. Water and Moisture The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a set basement. Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings. Heat The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. Power Source The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cord exits the unit to where it is plugged into an AC outlet. Cleaning The unit should be cleaned only as recommended. Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. Attachments Do not use attachments not recommended by the product manufacturer. Lightning and Power Surge Protection Unplug the unit from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. Overloading Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire of electric shock. Damage Requiring Service This unit should be serviced by qualified service personnel when: The power supply cord or plug has been damaged. Objects have fallen into or liquid has been spilled into the enclosure. The unit has been dropped or the enclosure damaged. The unit exhibits a marked change in performance or does not operate normally. Periods of Nonuse If the unit is to be left unused for an intended period of time, such as a month or longer, the power cord should be unplugged from the unit to prevent damage or corrosion. Servicing The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. PACKAGE CONTENTS 1 x LED Bluetooth Speaker 1 x AC-DC Adapter 1 x 3.5mm Audio Cable 1 x Instruction Manual
LOCATIO Front Vie Bottom V Top View ON OF COew View w NTROLS
1. LED/Vo a. Sh2 seconds  b. Inbutton（c. In button onc 2. Lamp s3. Built-in4. PowPress andShort pres5. DC Jac6. Aux-in 7. USB ch8. Operat Start-UpChoose aCAUTIONDo not ca Power SThe unit is(included)1. Make s2. Connecthe device3. Insert tCAUTIONOnly use Only use device. NOTE: Disconnec olume conhort tap thiss to adjust n Bluetooth（> 2 secoBluetooth ce to answshade n microphwer On/Ofd hold this ss to switcck(12V, 1.5Jack harging soting modep of the Da suitable loN: arry the devSupply s powered). sure the grict the device. he grid pluN: the suppliepower adact from mantrol buttos button cobrightnessh playbackonds ) to plmode: whwer the phohone ff button button to tch on/off th5A) ocket (Oue indicatorDevice/Inocation for vice by the by an exteid voltage ce with theug into a pred power aaptor with 1ains power on ontinously ts of the lighk mode: roay/pause chen receivone, tap thturn the une light duritput: 5V,1r ntroductithe devicee control knernal AC-Dcorresponde plug connroperly instadaptor for12V（supply duto change tht. otate it to current plaving an incis button anit On or Ofing power A) ion e. Suitablenob! DC power ads to the finector by intalled threer this devic）otherring longethe color oadjust theayback. coming caagain to enff. on mode. would be adapter wiigures on tnserting itse prong soce. Do not ur adaptorsr periods oof LED lighte volume, ll on your d the call. a dry, leveth an outputhe rating ps plug into cket. use for oth may causof non-use.t, then rotapress andcell phoneel, non-sliput of 12V Dplate. the "DC 12her devicesse damage. ate it withind hold thise, tap thisp surface.DC / 1.5A2V" jack ofs. e to the n s s f
USB ChYou can cfor the coNOTE: -Due to thcapacitiescondition.-Due to ththat need -A playba App InfoYou can aThe app gtimer). The iLidirectly toNOTE: De Goog ImportaOnce you“Playing Byou must 1. Open th2.Click on3.Select th4.Should ticon 5.Connec“AKBT80 6.Now youharging Scharge younnection. he differents, the loadi he design ocharging cck of audioormationalso downlogives you ank app is ao the downlepending ogle Play ant Note f are conneBack Musicconnect thhe app. n the icon mhe menu itthe devicect the app wLight”. u can operSocket ur smartphot smartphong duratioonly a powcurrents ofo-files thron: oad the apadditional cavailable foload. on the prov Afor Operected as dec Files”he app withmenu (1). tem for thee not appeawith the derate the deone througone types tn is depener supply of up to 250ugh this coppropriate acontrol optor android vider, downApp Store ration viaescribed in “Wirelessh the device Bluetoothar in the lisevice by clicevice usinggh this jackhat are offndent on thof 1A can b00mA, cannonnector isapp to this tions (amoand iOS. Snloading th a App n the chapts via Bluetoce. h connectiost, click the cking on g the app.k. Use the fered todayhe smartphbe ensurednot be chas not possidevice onngst othersScan the che app mayter ooth” on(2). search USB cabley, and theirhone used d. Devices rged. ble your smars, 3 alarm correspondy require pe of your smr different cand its opesuch as tartphone or times and ding QR copayment. martphonecharging erating ablets PCstablet PC.a sleep ode to go e s .
Basic O1.Turn onlight will b2. Short taLED light.3. Short tathe followWhite—> 4. Short pr5.Press and OPERATThis devicradius is lDue to thefunctional Pairing (LTo The SIf the speapairing ins 1. When speake2. Activat3. SelectTips: Onlyconnected4. If yoursoftwa5. If pairicolour If the spethe pairin1. After tuoperatbeep s2. After sdeviceOperation the unit bybe on,meanap the LED. ap the LEDing cyclicaWarm Whiress the d hold the TING THce offers yoimited to ae different ity cannot Linking) Apeaker aker has nstructions bthe speaker is readyte Bluetoot the speaky one playbd to another device asare versionng has beerindicator seaker has ng instrucurning on tting mode sound is hesuccessfulle wirelesslyn y pressingnwhile, theD/Volume D/Volume cal manner: te—>Greenbutton on t button HE SPEAKou the posapprox.10 mdevice mabe guaranA Bluetootever beenbelow to linker is turney to pair (linth on the cker name:"back unit cer playbacksks for a pan), then enten carried stops flashbeen pairtions belothe speakeindicator weard and oy pairing (y to the spe and hold te Operatincontrol bucontrol bun—>Cyan—the to switcto turn the KER IN Bssibility to umetres depanufacturernteed. h Enabledpaired witnk the sped on, the Onk) with yocompatible AL-LMGRcan be conk unit, the asskey (deter digits “0out succeshing. ed with thow to link er, the spewill flash in operating mlinking), yoeaker. the bung mode iutton onceutton conti—>Purple—ch off/on thunit off. BLUETOuse a Bluetpending onrs, modelsd Cell Photh a Bluetoaker with yOperating mour Bluetoodevice, anR" from thennected to speaker wepending o0000” (fourssfully, a bhe Bluetoothe speakaker will seblue. If themode indicaou can begtton on theindicator e, then rotanously to c—>Blue—>Ce LED lighOTH MOtooth enabn the surro, and softwone or Othooth deviceyour Bluetomode Indicoth device.nd set it to e list of fouthe speakewill not appen the devicr zeros) anbeep soundoth deviceker with yoearch for te unit findsator will kegin playing e bottom ofwill flash iate it to adjchange theColor Auto cht ODE bled deviceundings anware versioer Bluetooe before, yoooth devicecator flashesearch fornd deviceser. If the spear in the Bce manufand press OKd is heard, e before, your Bluetohe last pais the pairedeep in blue music fromf the unit,thn blue just brightne color of Lchange e. The funcnd the unitons, a full oth Enableou need toe. es in blue.r compatibls. peaker is aBT selectioacturers, mK. meanwhileyou need tooth devicred deviced Bluetooth and stop fm your Bluhe LED ness of theLED light inctional t used. ed Deviceo follow theThe le devices.already on list. odel, and e, the Blueto follow ce. e. The h device, aflashing. uetooth e n e e . e a
3. Rotatevolumeheard.4. Press playba5. To sto NOTES: • To be aobserve• If a mointerrupthe call,• The plaIf you w• If the dcheck if• If the coagain. Using the1. Link you2. When rebutton your ca3. Adjust t4. To end were plmusic w e the LED/Ve level, wh. and hold tack. op the unit, able to trae the operaobile phonepted. The s, the deviceyer will be want to recoevice is mf the deviceonnection e Unit as aur cell phoeceiving aon the unill using thethe volumethe call, juaying muswill automaVolume cohile the voluhe LED/Vopress andansfer audation manue on whicound howees are condisconneconnect youmoved beye is still cois lost, fola Hands-frne to the Ln incomingit to switche built-in me control ofust tap the sic from yoatically resuontrol butume level olume cond hold the dio data, Bual of your h you areever is not nnected to cted when yur device toond the onnected tollow the inree BluetoLED speakg call on yoh the incommicrophonef your cell pLED / Volour cell phume playintton to adjureaches itsntrol butto button toBluetooth player. e playing mplayed baeach otheyour devico this playeperational o the playenstructions ooth Speaker via Blueour cell phoming call fre and speaphone to olume contone to theng when youst the vols maximumon for 2 seo turn the uneeds to music receack via the r again andce is moveder, place it range, wher. above to kerphoneetooth as done, short rom cell phker. obtain the dtrol buttone speaker ou hang upume to adjm level, a “conds to punit off. stay activaeives a caspeaker. Ad playbackd beyond thwithin the hen it is bpair your described atap the LEhone to thedesired soun again, thbefore ansp. just to the “di” soundplay/pause ated in yoll, the musAfter you hak continueshe operatio operationbrought bacdevice to above. ED / Volume speaker. und level. e call will eswering thdesired d will be current our player,sic will beave endeds. onal rangeal range.ck, pleasethe playerme controlComplete end. If youhe call, the, e d e. e r l e u e
OPERATIIf you areunit via Bl 1. Plug oyour p2. Turn o3. Press up in R4. The vofunctioNotes: 1. If you'adjust your eexternsetting2. Press t3. Don't f TroubleShould yochart. Fault Unit cannoperated. No audio the BluetoconnectioSpeaker cconnected Poor sounfrom a Bludevice ING THE Se using an luetooth dine end of tplayer; plugon the exteand hold tRed. olume leveons on the 're connectthe volumexternal denal device ag. the Power forget to sshootingou experienot be signal via ooth on cannot be d nd quality uetooth® SPEAKERiPod, MP3/rectly, youthe 3.5mmg the otherernal audiothe butel can now external dted to the me control ovice, then and the voON/OFF bwitch off tg Guide nce difficulUnit crasSpeakerthe audiVolume Pairing dAudio soff Bluetootat the auBluetootsupporte Bluetootout of rspeakerR IN AUX-/MP4 playeu can still pm audio cabr end of cao source antton to turnbe controldevice as uLine out Jaof this speayou may nlume contrbutton to tuhe power olties in the Causeshes and “r is not paio source.too low does not wource is sth is switcudio sourceth versioned. th device isrange of tr IN MODEer or other play it on thble (includeable into thnd play youn on the unlled througusual. ack of youaker. If yoneed to adjrol of this uurn off theof your extuse of this“hangs” red to work switched ched off e. n is not s almost the LED E mobile phhe speakered) into thehe unit AUXur device.nit, the opegh the mainr external u're connejust both tunit to findunit whenternal devis player, plDisconnecseconds. TCheck whnecessaryaudio souIncrease tIncrease tsource. Check whsupports tSwitch onSwitch onaudio souUse a diffeMove youcloser to thone whichvia an aude headphonX-IN jack oerating modn unit. Opedevice, theected to thethe volumed the most n you finishice as well.lease referSoluct from theThen switcether a coy, pair the srce. the volumethe volumeether the athe A2DP pthe audio n the Bluerce. erent playbr Bluetoothhe LED sph cannot codio connecne or line oof the speade indicatoerate all oten you onle Headphoe control oft desirable h listening.. r to the follution e mains forch the unit onnection espeaker age on the spe on the auaudio sourprotocol source etooth funcback unit. h device peaker onnect thiscting cable.out jack onaker. or will lightther y need to one Jack off your volume owing r around 5 on again.exists. If gain to thepeaker udio rce ction in thes n t f e
Specific Power adPower CoStandby POutput PoFrequencySignal to Bluetooth Bluetooth LED NumWorking TWorking H The right developm This devicelectromaaccordanc NOTE: Thdigital devreasonablequipmenused in accommunicparticular If this equcan be decorrect the-- Reorien-- Increas-- Connecis connect-- Consultcation aptor (incluonsumptionPower Conower(RMSy ResponsNoise RatiVersion operation mbers TemperatuHumidity to make tement remaince has beeagnetic comce with thehis equipmvice, pursule protectiont generateccordance cations. Hoinstallationuipment doetermined be interferent or relocae the sepact the equipted. t the dealeuded) n nsumption ) se o (SNR) range re echnical anns reserveen tested ampatibility ae latest safent has beuant to Paron against es, uses anwith the inowever, then. es cause hby turning nce by oneate the recearation betwpment into r or an expInput AOutput 19W <0.5W10W 40Hz-1> 80dBV 4.0 Up to 118 (Wh0℃~ +20%~8nd design md. according toand low vofety regulateen tested t 15 of the harmful innd can radinstructionsere is no gharmful intthe equipme or more oeiving anteween the ean outlet operienced rAC 100-240DC 12V18KHz B 10 metres, hite)/18 (W35℃ 80% modificatioo all relevaoltage directions. and foundFCC Rulenterferenceiate radio fs, may causguarantee tterference ment off anof the folloenna. equipment on a circuiradio/TV te0V ~ 50/601.5A straight linWarm Whiteons in the cant currentctives, andd to complyes. These le in a residfrequency se harmfulthat interfeto radio ornd on, the uwing measand receivt different fechnician f0Hz ne distancee)/ 9 (RGB)course of ct CE guideld has beeny with the liimits are dential instaenergy andl interferenerence will r television user is encsures: ver. from that tofor help. e and no o) continuous lines, suchn constructeimits for a designed toallation. Thd, if not insnce to radionot occur receptioncouraged to which thbstacles product h as ed in Class B o provide his stalled ando in a , which o try to e receiver d
CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Navigation menu