AcoustMax ALLMGR Portable Bluetooth LED Speaker User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3742047
Application ID	RVNYuOhl1MMX17LtKK3KFQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	78.64kB (982960 bits)
Date Submitted	2018-02-06 00:00:00
Date Available	2018-02-06 00:00:00
Creation Date	2018-02-06 13:10:36
Producing Software	Adobe Acrobat Pro 10.0.0
Document Lastmod	2018-02-06 13:10:36
Document Title	Users Manual
Document Creator	Adobe Acrobat Pro 10.0.0
Document Author:	maniwayfjl

MANIWAY
SMART LAMP SPEAKER
Instruction Manual
PLEASE READ BEFORE OPERATING THIS EQUIPMENT.
Model: MW-L1
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to ensure your
personal safety.
However, improper use can result in potential electrical shock or fire hazards. Please read all safety and
operating instructions carefully before installation and use, and keep these instructions handy for future
reference. Take special note of all warnings listed in these instructions and on the unit.
Water and Moisture
The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry
tub, swimming pool or in a set basement.
Ventilation
The unit should be situated so that its location or position does not interfere with its proper ventilation.
For example, it should not be situated on a bed, sofa, rug or similar surface that may block the ventilation
openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which
may impede the flow of air through the ventilation openings.
Heat
The unit should be situated away from heat sources such as radiators, heat registers, stoves or other
appliances (including amplifiers) that produce heat.
Power Source
The unit should be connected to a power supply only of the type described in the operating instructions
or as marked on the appliance.
Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or pinched by items
placed upon or against them. It is always best to have a clear area from where the cord exits the unit to
where it is plugged into an AC outlet.
Cleaning
The unit should be cleaned only as recommended. Object and Liquid Entry Care should be taken so that
objects do not fall and liquids are not spilled into any openings or vents located on the product.
Attachments
Do not use attachments not recommended by the product manufacturer.
Lightning and Power Surge Protection
Unplug the unit from the wall outlet. This will prevent damage to the product due to lightning and
power-line surges.
Overloading
Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a
risk of fire of electric shock.
Damage Requiring Service
This unit should be serviced by qualified service personnel when:
The power supply cord or plug has been damaged.
Objects have fallen into or liquid has been spilled into the enclosure.
The unit has been dropped or the enclosure damaged.
The unit exhibits a marked change in performance or does not operate normally.
Periods of Nonuse
If the unit is to be left unused for an intended period of time, such as a month or longer, the power cord
should be unplugged from the unit to prevent damage or corrosion.
Servicing
The user should not attempt to service the unit beyond those methods described in the user’s operating
instructions.
Service methods not covered in the operating instructions should be referred to qualified service
personnel.
PACKAGE CONTENTS
LED Bluetooth Speaker
AC-DC Adapter
3.5mm Audio Cable
Instruction Manual
LOCATION OF CONTROLS
Front View
Bottom View
Top View
1. LED/Volume control button
a. Short tap this button continously to change the color of LED light, then rotate it within
2 seconds to adjust brightness of the light.


b. In Bluetooth playback mode: rotate it to adjust the volume, press and hold this
button（> 2 seconds ) to play/pause current playback.
c. In Bluetooth mode: when receiving an incoming call on your cell phone, tap this
button once to answer the phone, tap this button again to end the call.
2. Lamp shade
3. Built-in microphone
4.
Power On/Off button
Press and hold this button to turn the unit On or Off.
Short press to switch on/off the light during power on mode.
5. DC Jack(12V, 1.5A)
6. Aux-in Jack
7. USB charging socket (Output: 5V,1A)
8. Operating mode indicator
Start-Up of the Device/Introduction
Choose a suitable location for the device. Suitable would be a dry, level, non-slip surface.
CAUTION:
Do not carry the device by the control knob!
Power Supply
The unit is powered by an external AC-DC power adapter with an output of 12V DC / 1.5A
(included).
1. Make sure the grid voltage corresponds to the figures on the rating plate.
2. Connect the device with the plug connector by inserting its plug into the "DC 12V" jack of
the device.
3. Insert the grid plug into a properly installed three prong socket.
CAUTION:
Only use the supplied power adaptor for this device. Do not use for other devices.
Only use power adaptor with 12V（
）other adaptors may cause damage to the
device.
NOTE:
Disconnect from mains power supply during longer periods of non-use.
USB Charging Socket
You can charge your smartphone through this jack. Use the USB cable of your smartphone
for the connection.
NOTE:
-Due to the different smartphone types that are offered today, and their different charging
capacities, the loading duration is dependent on the smartphone used and its operating
condition.
-Due to the design only a power supply of 1A can be ensured. Devices such as tablets PCs
that need charging currents of up to 2500mA, cannot be charged.
-A playback of audio-files through this connector is not possible
App Information:
You can also download the appropriate app to this device on your smartphone or tablet PC.
The app gives you additional control options (amongst others, 3 alarm times and a sleep
timer).
The
iLink app is available for android and iOS. Scan the corresponding QR code to go
directly to the download.
NOTE: Depending on the provider, downloading the app may require payment.
Google Play
App Store
Important Note for Operation via App
Once you are connected as described in the chapter
“Playing Back Music Files”
“Wireless via Bluetooth”
you must connect the app with the device.
1. Open the app.
2.Click on the icon menu (1).
3.Select the menu item for the Bluetooth connection(2).
4.Should the device not appear in the list, click the search
icon
5.Connect the app with the device by clicking on
“AKBT80 Light”.
6.Now you can operate the device using the app.
Basic Operation
1.Turn on the unit by pressing and hold the
button on the bottom of the unit,the LED
light will be on,meanwhile, the Operating mode indicator will flash in blue
2. Short tap the LED/Volume control button once, then rotate it to adjust brightness of the
LED light.
3. Short tap the LED/Volume control button continously to change the color of LED light in
the following cyclical manner:
White—> Warm White—>Green—>Cyan—>Purple—>Blue—>Color Auto change
4. Short press the
button on the to switch off/on the LED light
5.Press and hold the
button to turn the unit off.
OPERATING THE SPEAKER IN BLUETOOTH MODE
This device offers you the possibility to use a Bluetooth enabled device. The functional
radius is limited to approx.10 metres depending on the surroundings and the unit used.
Due to the different device manufacturers, models, and software versions, a full
functionality cannot be guaranteed.
Pairing (Linking) A Bluetooth Enabled Cell Phone or Other Bluetooth Enabled Device
To The Speaker
If the speaker has never been paired with a Bluetooth device before, you need to follow the
pairing instructions below to link the speaker with your Bluetooth device.
1. When the speaker is turned on, the Operating mode Indicator flashes in blue. The
speaker is ready to pair (link) with your Bluetooth device.
2. Activate Bluetooth on the compatible device, and set it to search for compatible devices.
3. Select the speaker name:" MW-L1" from the list of found devices.
Tips: Only one playback unit can be connected to the speaker. If the speaker is already
connected to another playback unit, the speaker will not appear in the BT selection list.
4. If your device asks for a passkey (depending on the device manufacturers, model, and
software version), then enter digits “0000” (four zeros) and press OK.
5. If pairing has been carried out successfully, a beep sound is heard, meanwhile, the Blue
colour indicator stops flashing.
If the speaker has been paired with the Bluetooth device before, you need to follow
the pairing instructions below to link the speaker with your Bluetooth device.
1. After turning on the speaker, the speaker will search for the last paired device. The
operating mode indicator will flash in blue. If the unit finds the paired Bluetooth device, a
beep sound is heard and operating mode indicator will keep in blue and stop flashing.
2. After successfully pairing (linking), you can begin playing music from your Bluetooth
device wirelessly to the speaker.
3. Rotate the LED/Volume control button to adjust the volume to adjust to the desired
volume level, while the volume level reaches its maximum level, a “di” sound will be
heard.
4. Press and hold the LED/Volume control button for 2 seconds to play/pause current
playback.
5. To stop the unit, press and hold the
button to turn the unit off.
NOTES:
 To be able to transfer audio data, Bluetooth needs to stay activated in your player,
observe the operation manual of your player.
 If a mobile phone on which you are playing music receives a call, the music will be
interrupted. The sound however is not played back via the speaker. After you have ended
the call, the devices are connected to each other again and playback continues.
 The player will be disconnected when your device is moved beyond the operational range.
If you want to reconnect your device to this player, place it within the operational range.
 If the device is moved beyond the operational range, when it is brought back, please
check if the device is still connected to the player.
 If the connection is lost, follow the instructions above to pair your device to the player
again.
Using the Unit as a Hands-free Bluetooth Speakerphone
1. Link your cell phone to the LED speaker via Bluetooth as described above.
2. When receiving an incoming call on your cell phone, short tap the LED / Volume control
button on the unit to switch the incoming call from cell phone to the speaker. Complete
your call using the built-in microphone and speaker.
3. Adjust the volume control of your cell phone to obtain the desired sound level.
4. To end the call, just tap the LED / Volume control button again, the call will end. If you
were playing music from your cell phone to the speaker before answering the call, the
music will automatically resume playing when you hang up.
OPERATING THE SPEAKER IN AUX-IN MODE
If you are using an iPod, MP3/MP4 player or other mobile phone which cannot connect this
unit via Bluetooth directly, you can still play it on the speaker via an audio connecting cable.
1. Plug one end of the 3.5mm audio cable (included) into the headphone or line out jack on
your player; plug the other end of cable into the unit AUX-IN jack of the speaker.
2. Turn on the external audio source and play your device.
3. Press and hold the
button to turn on the unit, the operating mode indicator will light
up in Red.
4. The volume level can now be controlled through the main unit. Operate all other
functions on the external device as usual.
Notes:
1. If you're connected to the Line out Jack of your external device, then you only need to
adjust the volume control of this speaker. If you're connected to the Headphone Jack of
your external device, then you may need to adjust both the volume control of your
external device and the volume control of this unit to find the most desirable volume
setting.
2. Press the Power ON/OFF button to turn off the unit when you finish listening.
3. Don't forget to switch off the power of your external device as well.
Troubleshooting Guide
Should you experience difficulties in the use of this player, please refer to the following
chart.
Fault
Cause
Solution
Unit cannot be
operated.
No audio signal via
the Bluetooth
connection
Unit crashes and “hangs”
Disconnect from the mains for around 5
seconds. Then switch the unit on again.
Speaker is not paired to
the audio source.
Check whether a connection exists. If
necessary, pair the speaker again to the
audio source.
Volume too low
Pairing does not work
Speaker cannot be
connected
Poor sound quality
from a Bluetooth®
device
Audio source is switched
off
Bluetooth is switched off
at the audio source.
Bluetooth version is not
supported.
Increase the volume on the speaker
Increase the volume on the audio
source.
Check whether the audio source
supports the A2DP protocol
Switch on the audio source
Switch on the Bluetooth function in the
audio source.
Use a different playback unit.
Bluetooth device is almost
Move your Bluetooth device
out of range of the LED
closer to the LED speaker
speaker
Specification
Power adaptor (included)
Input AC 100-240V ~ 50/60Hz
Output DC 12V 1.5A
Power Consumption
19W
Standby Power Consumption
<0.5W
Output Power(RMS)
10W
Frequency Response
40Hz-18KHz
Signal to Noise Ratio (SNR)
> 80dB
Bluetooth Version
V 4.0
Bluetooth operation range
Up to 10 metres, straight line distance and no obstacles
LED Numbers
18 (White)/18 (Warm White)/ 9 (RGB)
Working Temperature
0℃~ +35℃
20%~80%
Working Humidity
The right to make technical and design modifications in the course of continuous product
development remains reserved.
This device has been tested according to all relevant current CE guidelines, such as
electromagnetic compatibility and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
AM Lifestyles
LUMIN, Portable LED Bluetooth S peaker
Instruction Manual
PLEA
ASE READ
D BEFORE
E OPERAT
TING THIS
S EQUIPM ENT.
Mo
odel: AL-L
LMGR
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to ensure your
personal safety.
However, improper use can result in potential electrical shock or fire hazards. Please read all safety and
operating instructions carefully before installation and use, and keep these instructions handy for future
reference. Take special note of all warnings listed in these instructions and on the unit.
Water and Moisture
The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry
tub, swimming pool or in a set basement.
Ventilation
The unit should be situated so that its location or position does not interfere with its proper ventilation.
For example, it should not be situated on a bed, sofa, rug or similar surface that may block the ventilation
openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which
may impede the flow of air through the ventilation openings.
Heat
The unit should be situated away from heat sources such as radiators, heat registers, stoves or other
appliances (including amplifiers) that produce heat.
Power Source
The unit should be connected to a power supply only of the type described in the operating instructions
or as marked on the appliance.
Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or pinched by items
placed upon or against them. It is always best to have a clear area from where the cord exits the unit to
where it is plugged into an AC outlet.
Cleaning
The unit should be cleaned only as recommended. Object and Liquid Entry Care should be taken so that
objects do not fall and liquids are not spilled into any openings or vents located on the product.
Attachments
Do not use attachments not recommended by the product manufacturer.
Lightning and Power Surge Protection
Unplug the unit from the wall outlet. This will prevent damage to the product due to lightning and
power-line surges.
Overloading
Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a
risk of fire of electric shock.
Damage Requiring Service
This unit should be serviced by qualified service personnel when:
The power supply cord or plug has been damaged.
Objects have fallen into or liquid has been spilled into the enclosure.
The unit has been dropped or the enclosure damaged.
The unit exhibits a marked change in performance or does not operate normally.
Periods of Nonuse
If the unit is to be left unused for an intended period of time, such as a month or longer, the power cord
should be unplugged from the unit to prevent damage or corrosion.
Servicing
The user should not attempt to service the unit beyond those methods described in the user’s operating
instructions.
Service methods not covered in the operating instructions should be referred to qualified service
personnel.
PACKAGE CONTENTS
LED Bluetooth Speaker
AC-DC Adapter
3.5mm Audio Cable
Instruction Manual
LOCATIO
ON OF CONTROLS
Front Vie
ew
Bottom V
View
Top View
1. LED/Vo
olume con
ntrol butto
on
a. Sh
hort tap thiss button co
ontinously tto change the
t color of
o LED lightt, then rota
ate it within
2 secondss to adjust brightness
s of the ligh
ht.
Š
Š
b. In
n Bluetooth
h playback
k mode: ro
otate it to adjust the
e volume, press and
d hold thiss
button（
（> 2 seco
onds ) to play/pause ccurrent pla
ayback.
c. In Bluetooth mode: wh
hen receivving an inc
coming call on your cell phone
e, tap thiss
wer the pho
one, tap th is button again
to end the call.
button oncce to answ
2. Lamp s
shade
3. Built-in
n microph
hone
4.
Pow
wer On/Offf button
Press and
d hold this button to turn
the un
nit On or Offf.
Short presss to switcch on/off the light duriing power on mode.
5. DC Jac
ck(12V, 1.5
5A)
6. Aux-in Jack
7. USB ch
harging so
ocket (Output: 5V,1 A)
8. Operatting mode
e indicatorr
Start-Up
p of the Device/In
ntroductiion
Choose a suitable lo
ocation for the device
e. Suitable would be a dry, leveel, non-slip
p surface.
CAUTION
N:
Do not ca
arry the devvice by the
e control kn
nob!
Supply
Power S
The unit iss powered by an exte
ernal AC-D
DC power adapter
with an outpuut of 12V DC
D / 1.5A
(included)).
1. Make ssure the griid voltage correspond
ds to the fiigures on the
t rating pplate.
2. Connecct the devicce with the
e plug conn
nector by in
nserting its
s plug into the "DC 12
2V" jack off
the device
e.
3. Insert the grid plu
ug into a prroperly insttalled three
e prong socket.
CAUTION
N:
Only use the supplie
ed power adaptor
forr this devic
ce. Do not use
u for othher devices
s.
Only use power ada
aptor with 12V（
）otherr adaptors may causse damage
e to the
device.
NOTE:
Disconnecct from ma
ains power supply du ring longer periods of
o non-use..
USB Ch
harging Socket
You can ccharge you
ur smartpho
one throug
gh this jack
k. Use the USB cablee of your sm
martphone
for the connection.
NOTE:
he differentt smartpho
one types t hat are offfered today
y, and theirr different charging
-Due to th
capacitiess, the loading duration is depen
ndent on th
he smartph
hone used and its ope
erating
condition.
-Due to th
he design only
a power supply o
of 1A can be
b ensured
d. Devices such as ta
ablets PCss
that need charging currents
off up to 250
00mA, cann
not be charged.
-A playback of audio
o-files through this co
onnector is
s not possible
App Info
ormation
n:
You can a
also downlo
oad the ap
ppropriate a
app to this device on your smarrtphone or tablet PC..
The app g
gives you additional
control
opttions (amongst others
s, 3 alarm times and a sleep
timer).
The
iLink app is available
fo
or android and iOS. Scan
the correspond
ding QR co
ode to go
directly to
o the downlload.
NOTE: De
epending on
o the prov
vider, down
nloading th
he app may
y require ppayment.
Googgle Play
App
A Store
Importa
ant Note for
f Operration via
a App
Once you are conne
ected as de
escribed in
n the chaptter
“Playing B
Back Musicc Files”
“Wirelesss via Blueto
ooth”
you must connect th
he app with
h the devicce.
1. Open th
he app.
2.Click on
n the icon menu
(1).
3.Select th
he menu ittem for the
e Bluetooth
h connectio
on(2).
4.Should tthe device
e not appea
ar in the lisst, click the search
icon
5.Connecct the app with
w the de
evice by cliccking on
“AKBT80 Light”.
6.Now you
u can operrate the de
evice using
g the app.
Basic O
Operation
1.Turn on the unit byy pressing and hold tthe
button on the
e bottom off the unit,th
he LED
light will b
be on,mean
nwhile, the
e Operatin
ng mode indicator
will flash i n blue
2. Short ta
ap the LED
D/Volume control bu
utton once
e, then rota
ate it to adjjust brightn
ness of the
LED light..
3. Short ta
ap the LED
D/Volume control
bu
utton continously to change
thee color of LED
light in
the following cyclica
al manner:
White—> Warm White—>Green
n—>Cyan—
—>Purple—
—>Blue—>C
Color Auto cchange
4. Short prress the
button on the
t to switcch off/on the LED ligh
ht
5.Press andd hold the
button to turn the unit off.
TING TH
HE SPEAK
KER IN B
BLUETOOTH MO
ODE
OPERAT
This devicce offers yo
ou the pos
ssibility to u
use a Bluettooth enab
bled devicee. The func
ctional
radius is limited to approx.10
metres
dep
pending on
n the surroundings annd the unitt used.
Due to the
e different device ma
anufacturerrs, models, and softw
ware versioons, a full
functionality cannot be guaran
nteed.
Pairing (L
Linking) A Bluetooth Enabled
d Cell Pho
one or Other Bluetoo
oth Enable
ed Device
To The Speaker
If the spea
aker has never been paired witth a Blueto
ooth device
e before, yoou need to
o follow the
pairing insstructions below
to lin
nk the spe aker with your
Blueto
ooth devicee.
1. When the speakker is turned on, the O
Operating mode
Indic
cator flashees in blue. The
er is readyy to pair (lin
nk) with yo
our Bluetoo
oth device.
speake
2. Activatte Bluetooth on the compatible
device, an
nd set it to search forr compatiblle devices..
3. Selectt the speakker name:" AL-LMGR
R" from the
e list of found devicess.
Tips: Onlyy one playb
back unit can
c be con
nnected to the speake
er. If the sppeaker is already
connected
d to anothe
er playback
k unit, the speaker will
w not appe
ear in the B
BT selectio
on list.
4. If yourr device assks for a pa
asskey (de
epending on the devic
ce manufaacturers, model, and
softwa
are version
n), then entter digits “0
0000” (fourr zeros) an
nd press OK
K.
5. If pairing has bee
en carried out successsfully, a beep
sound
d is heard, meanwhile
e, the Blue
colourr indicator stops
flash
hing.
If the spe
eaker has been paired with th
he Bluetoo
oth device
e before, yyou need to
t follow
the pairin
ng instructions belo
ow to link the speak
ker with yo
our Blueto
ooth devic
ce.
1. After tu
urning on the
t speake
er, the spe aker will se
earch for the last pai red device
e. The
operatting mode indicator will
w flash in blue. If the
e unit finds
s the pairedd Bluetooth
h device, a
beep ssound is he
eard and operating
mode indica
ator will ke
eep in blue and stop flashing.
2. After ssuccessfully pairing (linking), yo
ou can beg
gin playing music from
m your Blu
uetooth
device
e wirelesslyy to the spe
eaker.
3. Rotate
e the LED/V
Volume co
ontrol buttton to adju
ust the volume to adjjust to the desired
volume
e level, wh
hile the volu
ume level reaches its
s maximum
m level, a ““di” sound
d will be
heard..
4. Press and hold the LED/Vo
olume con
ntrol butto
on for 2 seconds to pplay/pause current
ack.
playba
5. To sto
op the unit, press and
d hold the
button to
o turn the unit
u off.
NOTES:
• To be a
able to tra
ansfer aud
dio data, B
Bluetooth needs to stay activaated in yo
our player,,
observe
e the opera
ation manu
ual of your player.
• If a mo
obile phone
e on which you are
e playing music
rece
eives a ca ll, the mus
sic will be
interrup
pted. The sound howe
ever is not played ba
ack via the speaker. A
After you ha
ave ended
the call,, the device
es are con
nnected to each other again and
d playbackk continues
s.
• The player will be disconnec
cted when yyour devic
ce is moved
d beyond thhe operatio
onal range
e.
If you w
want to reco
onnect you
ur device to
o this playe
er, place it within the operational range.
• If the device is moved
beyond the o perational range, wh
hen it is bbrought bac
ck, please
check iff the device
e is still connected to
o the playe
er.
• If the co
onnection is lost, folllow the in
nstructions above to pair your device to the playerr
again.
e Unit as a Hands-frree Blueto
ooth Speakerphone
Using the
1. Link you
ur cell phone to the LED
speakker via Blue
etooth as described
aabove.
2. When re
eceiving an incoming
g call on yo
our cell pho
one, short tap the LE
ED / Volum
me controll
button on the uniit to switch
h the incom
ming call frrom cell ph
hone to thee speaker. Complete
your call using the
e built-in microphone
e and speaker.
e control off your cell p
phone to obtain
the desired
souund level.
3. Adjust tthe volume
4. To end the call, ju
ust tap the LED / Vollume conttrol button
n again, th e call will end.
If you
our cell ph one to the
e speaker before ansswering th
he call, the
were playing mussic from yo
will automa
atically resu
ume playin
ng when yo
ou hang up
p.
music w
OPERATIING THE SPEAKER
R IN AUX- IN MODE
If you are
e using an iPod, MP3//MP4 playeer or other mobile ph
hone whichh cannot co
onnect thiss
unit via Blluetooth directly, you
u can still p
play it on th
he speaker via an auddio conneccting cable.
1. Plug one end of the
t 3.5mm
m audio cab
ble (include
ed) into the
e headphonne or line out
o jack on
player; plug
g the otherr end of caable into th
he unit AUX
X-IN jack oof the spea
aker.
your p
2. Turn o
on the exte
ernal audio
o source an
nd play you
ur device.
3. Press and hold the
buttton to turn
n on the un
nit, the ope
erating modde indicato
or will lightt
up in R
Red.
4. The vo
olume leve
el can now be controllled throug
gh the main
n unit. Opeerate all otther
functio
ons on the external device
as u
usual.
Notes:
1. If you''re connectted to the Line out Jaack of your external device, theen you only need to
adjust the volum
me control of
o this speaaker. If you're conne
ected to thee Headpho
one Jack off
your e
external device, then you may n
need to adjjust both the
t volumee control off your
extern
nal device and
a the volume contrrol of this unit
u to find
d the mostt desirable volume
setting
g.
2. Press tthe Power ON/OFF button
to tu
urn off the unit when
n you finishh listening.
3. Don't fforget to switch off the power o
of your extternal deviice as well..
Troubleshooting
g Guide
Should yo
ou experien
nce difficullties in the use of this
s player, pllease referr to the following
chart.
Fault
Soluution
Cause
Unit cannot be
operated.
No audio signal via
ooth
the Blueto
connectio
on
Unit cras
shes and ““hangs”
Disconnec
ct from thee mains forr around 5
seconds. Then
switcch the unit on again.
Speakerr is not paired to
the audio source.
Check whether a coonnection exists.
If
necessary
y, pair the sspeaker ag
gain to the
audio source.
Volume too low
Pairing does
not w
work
Speaker ccannot be
connected
nd quality
Poor soun
from a Blu
uetooth®
device
Audio source is sswitched
off
Bluetootth is switcched off
at the au
udio source
e.
Bluetootth version
n is not
supporte
ed.
Increase the
t volumee on the sp
peaker
Increase the
t volumee on the au
udio
source.
Check whether the aaudio sourrce
supports the
t A2DP pprotocol
Switch on the audio source
Switch on
n the Blueetooth func
ction in the
audio source.
Use a diffe
erent playbback unit.
Bluetootth device iss almost
Move your Bluetoothh device
out of range
of tthe LED
closer to the LED sppeaker
speakerr
Specific
cation
Power adaptor (inclu
uded)
Input A
AC 100-240
0V ~ 50/60
0Hz
Output DC 12V 1.5A
Power Co
onsumption
19W
Standby P
Power Con
nsumption
<0.5W
Output Po
ower(RMS)
10W
Frequencyy Responsse
40Hz-1
18KHz
Signal to Noise Ratio (SNR)
> 80dB
Bluetooth Version
V 4.0
Bluetooth operation range
Up to 1
10 metres, straight lin
ne distancee and no obstacles
LED Num
mbers
18 (Wh
hite)/18 (W
Warm White
e)/ 9 (RGB))
Working T
Temperature
0℃~ + 35℃
20%~8
80%
Working H
Humidity
echnical an
nd design m
modificatio
ons in the course
of ccontinuous product
The right to make te
ment remain
ns reserved.
developm
This devicce has bee
en tested according
to
o all releva
ant currentt CE guidellines, such
h as
electroma
agnetic com
mpatibility and
a low vo
oltage direc
ctives, and
d has beenn constructe
ed in
accordancce with the
e latest saffety regulattions.
his equipment has be
een tested and found
d to comply
y with the liimits for a Class B
NOTE: Th
digital devvice, pursu
uant to Part 15 of the FCC Rule
es. These limits are ddesigned to
o provide
reasonablle protectio
on against harmful in
nterference
e in a residential instaallation. Th
his
equipmen
nt generate
es, uses an
nd can radiiate radio frequency
energy andd, if not ins
stalled and
used in acccordance with the in
nstructionss, may caus
se harmfull interferennce to radio
communiccations. Ho
owever, the
ere is no g
guarantee that
interfe
erence will not occur in a
particular installation
n.
If this equ
uipment does cause harmful
intterference to radio orr television reception, which
can be de
etermined by
b turning the equipm
ment off an
nd on, the user
is enccouraged to try to
correct the
e interference by one
e or more o
of the following meas
sures:
-- Reorien
nt or reloca
ate the rece
eiving ante
enna.
-- Increase the sepa
aration betw
ween the e
equipment and receiv
ver.
-- Connecct the equip
pment into an outlet o
on a circuit different from
that too which the receiver
is connectted.
-- Consultt the dealer or an exp
perienced rradio/TV te
echnician for
f help.
CAUTION: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : maniwayfjl
Create Date                     : 2018:02:06 13:10:36+01:00
Modify Date                     : 2018:02:06 13:10:36+01:00
Title                           : 
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2018:02:06 13:10:36+01:00
Creator Tool                    : Adobe Acrobat Pro 10.0.0
Format                          : application/pdf
Creator                         : maniwayfjl
Document ID                     : uuid:96f4c29b-5fb2-4626-bd86-1097e0694939
Instance ID                     : uuid:1ad7daad-2a6f-4296-bcde-576818add9e4
Producer                        : Adobe Acrobat Pro 10.0.0
Page Count                      : 20

EXIF Metadata provided by EXIF.tools