ADC Telecommunications F0064-111 InterReach® Fusion Remote Access Unit User Manual fusionBOOK

ADC Telecommunications Inc. InterReach® Fusion Remote Access Unit fusionBOOK

Contents

User manual 1

D-620616-0-20Rev AInterReach® Fusion® WidebandInstallation, Operation, and Reference Manual
D-620616-0-20 Help Hot Line (U.S. only): 1-800-530-9960Rev A CONFIDENTIAL
D-620616-0-20 Help Hot Line (U.S. only): 1-800-530-9960Rev A CONFIDENTIALThis manual is produced for use by LGC Wireless personnel, licensees, and customers. The information contained herein is the property of LGC Wireless. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of LGC Wireless.LGC Wireless reserves the right to make changes, without notice, to the specifications and materials contained herein, and shall not be responsible for any damages caused by reliance on the material as presented, including, but not limited to, typographical and listing errors.Your comments are welcome – they help us improve our products and documentation. Please address your comments to LGC Wireless, Inc. corporate headquarters in San Jose, California:Address 2540 Junction AvenueSan Jose, California95134-1902 USAAttn: Marketing Dept.Phone 1-408-952-2400Fax 1-408-952-2410Help Hot Line 1-800-530-9960 (U.S. only)+1-408-952-2400 (International)Web Address http://www.lgcwireless.come-mail info@lgcwireless.comservice@lgcwireless.comCopyright © 2008 by LGC Wireless, Inc. Printed in USA. All rights reserved.TrademarksAll trademarks identified by ™ or ® are trademarks or registered trademarks of LGC Wireless, Inc. All other trademarks belong to their respective owners.
InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev ALimited WarrantySeller warrants articles of its manufacture against defective materials or workmanship for a period of one year from the date of shipment to Purchaser, except as provided in any warranty applicable to Purchaser on or in the package containing the Goods (which warranty takes precedence over the following warranty). The liability of Seller under the foregoing warranty is limited, at Seller’s option, solely to repair or replacement with equivalent Goods, or an appropriate adjustment not to exceed the sales price to Purchaser, provided that (a) Seller is notified in writing by Purchaser, within the one year warranty period, promptly upon discovery of defects, with a detailed description of such defects, (b) Purchaser has obtained a Return Materials Authorization (RMA) from Seller, which RMA Seller agrees to provide Purchaser promptly upon request, (c) the defective Goods are returned to Seller, transportation and other applicable charges prepaid by the Purchaser, and (d) Seller’s examination of such Goods discloses to its reasonable satisfaction that defects were not caused by negligence, misuse, improper installation, improper maintenance, accident or unauthorized repair or alteration or any other cause outside the scope of Purchaser’s warranty made hereunder. Notwithstanding the foregoing, Seller shall have the option to repair any defective Goods at Purchaser’s facility. The original warranty period for any Goods that have been repaired or replaced by seller will not thereby be extended. In addition, all sales will be subject to standard terms and conditions on the sales contract.Licensed OperatorsLGC Wireless’ equipment is designed to operate in the licensed frequency bands of mobile, cellular, and PCS operators. In the USA, the EU, and most countries this equipment may only be used by the licensee, his authorized agents or those with written authorization to do so. Similarly, unauthorized use is illegal, and subjects the owner to the corresponding legal sanctions of the national jurisdiction involved. Ownership of LGC Wireless equipment carries no automatic right of use.
InterReach Fusion Wideband Installation, Operation, and Reference Manual 1D-620616-0-20 Rev A CONFIDENTIALTable of ContentsSECTION 1 General Information . . . . . . . . . . . . . . . . . . . . . . 1-11.1 Firmware Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11.2 Purpose and Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11.3 Conventions in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . 1-21.4 Standards Conformance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-31.5 Related Publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3SECTION 2 InterReach Fusion Wideband System Description . . . . . . . . . . . . . . . . . . . . . . 2-12.1 System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12.2 System Hardware Description . . . . . . . . . . . . . . . . . . . . . . . . 2-32.3 System OA&M Capabilities Overview . . . . . . . . . . . . . . . . . 2-52.3.1 System Monitoring and Reporting . . . . . . . . . . . . . . . . . . . . . 2-62.3.2 Using Alarm Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-62.4 System Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-72.5 System Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-82.6 System Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-92.6.1 RF End-to-End Performance . . . . . . . . . . . . . . . . . . . . . . . . . 2-10SECTION 3 Fusion Wideband Main Hub . . . . . . . . . . . . . . . . 3-13.1 Fusion Wideband Main Hub Overview . . . . . . . . . . . . . . . . . 3-13.2 Fusion Wideband Main Hub Front Panel . . . . . . . . . . . . . . . . 3-43.2.1 Optical Fiber Uplink/Downlink Ports . . . . . . . . . . . . . . . . . . . 3-53.2.2 Communications RS-232 Serial Connector . . . . . . . . . . . . . . 3-53.2.3 Main Hub LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-53.3 Fusion Wideband Main Hub Rear Panel . . . . . . . . . . . . . . . . 3-83.3.1 Fusion Wideband Main Hub Rear Panel Connectors . . . . . . . 3-83.3.1.1 9-pin D-sub Connector . . . . . . . . . . . . . . . . . . . . . . . . . 3-83.3.1.2 N-type Female Connectors . . . . . . . . . . . . . . . . . . . . . . 3-93.4 Main Hub Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-103.5 Faults, Warnings, and Status Messages . . . . . . . . . . . . . . . . 3-11
CONFIDENTIAL2InterReach Fusion Wideband Installation, Operation, and Reference ManualD-620616-0-20 Rev A3.5.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-113.5.2 View Preference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12SECTION 4 Fusion Wideband Expansion Hub . . . . . . . . . . . 4-14.1 Expansion Hub Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14.2 Expansion Hub Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . 4-34.2.1 75 Ohm Type F Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-44.2.2 Manufacturing RS-232 Serial Connector . . . . . . . . . . . . . . . . 4-44.2.3 Optical Fiber Uplink/Downlink Connectors . . . . . . . . . . . . . . 4-44.2.4 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-54.3 Expansion Hub Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-84.4 Faults, Warnings, and Status Messages . . . . . . . . . . . . . . . . . . 4-94.5 Expansion Hub Specifications . . . . . . . . . . . . . . . . . . . . . . . 4-10SECTION 5 Remote Access Unit . . . . . . . . . . . . . . . . . . . . . . 5-15.1 RAU Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15.2 Remote Access Unit Connectors . . . . . . . . . . . . . . . . . . . . . . . 5-55.2.1 50 Ohm Type-N Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-55.2.2 75 Ohm Type-F Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-55.3 RAU LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-55.4 Faults and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-65.5 Remote Access Unit Specifications . . . . . . . . . . . . . . . . . . . . 5-7SECTION 6 Designing a Fusion Wideband Solution . . . . . . 6-16.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-16.2 Downlink RSSI Design Goal . . . . . . . . . . . . . . . . . . . . . . . . . 6-36.3 Maximum Output Power per Carrier . . . . . . . . . . . . . . . . . . . 6-46.3.1 2500 MHz WiMAX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-56.4 System Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-66.5 Estimating RF Coverage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-86.5.1 Path Loss Equation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-96.5.2 RAU Coverage Distance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-106.5.3 Examples of Design Estimates . . . . . . . . . . . . . . . . . . . . . . . 6-126.6 Link Budget Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-146.6.1 Elements of a Link Budget for Narrowband Standards . . . . . 6-146.6.2 Narrowband Link Budget Analysis for a Microcell Application . . . . . . . . . . . . . . . . . . . . . . . . . . 6-176.6.3 Elements of a Link Budget for CDMA Standards . . . . . . . . . 6-196.6.4 CDMA Link Budget Analysis for a Microcell Application . 6-226.6.5 Considerations for Re-Radiation (Over-the-Air) Systems . . . 6-256.7 Optical Power Budget . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-266.8 Connecting a Main Hub to a Base Station . . . . . . . . . . . . . . 6-276.8.1 Uplink Attenuation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-276.8.2 RAU Attenuation and ALC . . . . . . . . . . . . . . . . . . . . . . . . . . 6-28
CONFIDENTIALInterReach Fusion Wideband Installation, Operation, and Reference Manual 3D-620616-0-20 Rev A6.8.2.1 Using the RAU 10 dB Attenuation Setting . . . . . . . . . 6-296.8.2.2 Using the Uplink ALC Setting . . . . . . . . . . . . . . . . . 6-30SECTION 7 Installing Fusion Wideband . . . . . . . . . . . . . . . . 7-17.1 Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17.1.1 Component Location Requirements . . . . . . . . . . . . . . . . . . . . 7-27.1.2 Cable and Connector Requirements . . . . . . . . . . . . . . . . . . . . 7-27.1.3 Distance Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-37.2 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-37.2.1 Installation Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-37.2.2 General Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-47.2.3 Fiber Port Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 7-47.3 Preparing for System Installation . . . . . . . . . . . . . . . . . . . . . . 7-67.3.1 Pre-Installation Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-67.3.2 Installation Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-67.3.3 Tools and Materials Required . . . . . . . . . . . . . . . . . . . . . . . . . 7-87.3.4 Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-97.4 Fusion Wideband Installation Procedures . . . . . . . . . . . . . . 7-107.4.1 Installing a Fusion Wideband Main Hub . . . . . . . . . . . . . . . . 7-117.4.2 Installing Expansion Hubs . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-257.4.3 Installing RAUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-327.4.3.1 Troubleshooting Using RAU LEDs During Installation . 7-337.4.4 Configuring the Fusion Wideband System . . . . . . . . . . . . . . 7-347.5 Splicing Fiber Optic Cable . . . . . . . . . . . . . . . . . . . . . . . . . . 7-407.6 Interfacing the Fusion Wideband Main Hub to an RF Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-427.6.1 Connecting a Single Fusion Wideband Main Hub to an RF Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-427.6.2 Connecting Multiple Fusion Wideband Main Hubs to an RF Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-477.7 Connecting Contact Alarms to a Fusion Wideband System . 7-537.7.1 Alarm Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-547.7.2 Alarm Sense . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-577.7.3 Alarm Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-597.8 Alarm Monitoring Connectivity Options . . . . . . . . . . . . . . . 7-617.8.1 Direct Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-617.8.2 Modem Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-627.8.2.1 Setting Up Fusion Wideband Modem Using AdminBrowser . . . . . . . . . . . . . . . . . . . . . . . . . 7-627.8.2.2 Setting Up a PC Modem Using Windows . . . . . . . . . . 7-637.8.3 100 BASE-T Port Expander Connection . . . . . . . . . . . . . . . . 7-717.8.4 POTS Line Sharing Switch Connection . . . . . . . . . . . . . . . . 7-727.8.5 Ethernet LAN Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-747.8.6 SNMP Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-75
CONFIDENTIAL4InterReach Fusion Wideband Installation, Operation, and Reference ManualD-620616-0-20 Rev ASECTION 8 Replacing Fusion Wideband Components . . . . 8-18.1 Replacing an RAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18.2 Replacing a Fusion Wideband Expansion Hub . . . . . . . . . . . . 8-38.3 Replacing a Fusion Wideband Main Hub . . . . . . . . . . . . . . . . 8-4SECTION 9 Maintenance, Troubleshooting, and Technical Assistance . . . . . . . . . . . . . . . . . 9-19.1 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-19.2 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-29.3 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-39.3.1 Troubleshooting Using AdminBrowser . . . . . . . . . . . . . . . . . . 9-49.3.1.1 Troubleshooting Recommendations . . . . . . . . . . . . . . . 9-49.3.1.2 Fault/Warning/Status Indications . . . . . . . . . . . . . . . . . . 9-59.3.2 Troubleshooting Using LEDs . . . . . . . . . . . . . . . . . . . . . . . . . 9-59.4 Troubleshooting CATV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-109.5 Technical Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10APPENDIX A Cables and Connectors . . . . . . . . . . . . . . . . . . . A-1A.1 75 Ohm CATV Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-1A.2 Fiber Optical Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-6A.3 Coaxial Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-7A.4 Standard Modem Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-7A.5 TCP/IP Cross-over Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-8A.6 DB-9 to DB-9 Null Modem Cable . . . . . . . . . . . . . . . . . . . . .A-9APPENDIX B Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1B.1 Fusion Wideband System Approval Status . . . . . . . . . . . . . .B-1B.2 Human Exposure to RF . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-2APPENDIX C Faults, Warnings, Status Tables . . . . . . . . . . . . C-1C.1 Faults Reported by Fusion Wideband Main/SingleStar Hubs C-1C.2 Faults Reported for System CPU . . . . . . . . . . . . . . . . . . . . . . C-5C.3 Faults for Fusion Wideband Expansion Hubs . . . . . . . . . . . . C-6C.4 Faults for RAUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-8C.5 Warning/Status Messages for Fusion Wideband Main/SingleStar Hubs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-10C.6 Warning/Status Messages for System CPUs . . . . . . . . . . . . C-15C.7 Warning/Status Messages for Fusion Expansion Hubs . . . . C-16C.8 Warning /Status Messages for RAUs . . . . . . . . . . . . . . . . . .C-19
CONFIDENTIALInterReach Fusion Wideband Installation, Operation, and Reference Manual 1D-620616-0-20 Rev AList of FiguresFigure 2-1 Fusion Wideband System Hardware . . . . . . . . . . . . . . . . . . . . . . . . .2-4Figure 2-2 Fusion Wideband One Port System Hardware . . . . . . . . . . . . . . . . . .2-4Figure 2-3 Three Methods for OA&M Communications . . . . . . . . . . . . . . . . . .2-5Figure 2-4 System Monitoring and Reporting . . . . . . . . . . . . . . . . . . . . . . . . . .2-6Figure 2-5 Fusion Wideband’s Double Star Architecture . . . . . . . . . . . . . . . . . .2-7Figure 2-6 Downlink (Base Station to Wireless Devices) . . . . . . . . . . . . . . . . . .2-8Figure 2-7 Uplink (Wireless Devices to Base Station) . . . . . . . . . . . . . . . . . . . .2-8Figure 3-1 Main Hub in a Fusion Wideband System . . . . . . . . . . . . . . . . . . . . .3-2Figure 3-2 Main Hub Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3Figure 3-3 Fusion Wideband Main Hub Front Panel . . . . . . . . . . . . . . . . . . . . . .3-4Figure 3-4 Fusion Wideband Main Hub Rear Panel . . . . . . . . . . . . . . . . . . . . . .3-8Figure 3-5 Preferences Check Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-12Figure 4-1 Expansion Hub in a Fusion Wideband System . . . . . . . . . . . . . . . . .4-1Figure 4-2 Expansion Hub Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2Figure 4-3 Expansion Hub Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3Figure 4-4 Expansion Hub Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-8Figure 5-1 Remote Access Unit in a Fusion Wideband System . . . . . . . . . . . . .5-2Figure 5-2 Remote Access Unit Block Diagram (Multiband) . . . . . . . . . . . . . . .5-2Figure 6-1 Determining APL between the Antenna and the Wireless Device . .6-8Figure 6-2 ALC Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-29Figure 7-1 Flush Mounting Bracket Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-12Figure 7-2 Bracket Detail For Wall Mount Rack (PN 4712) . . . . . . . . . . . . . . .7-13Figure 7-3 Installing Directly to the Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-14
CONFIDENTIAL2InterReach Fusion Wideband Installation, Operation, and Reference ManualD-620616-0-20 Rev AFigure 7-4 Using Hub Rack-Mounting Brackets for Direct Wall Installation . 7-15Figure 7-5 Protective Ground Wire Connection . . . . . . . . . . . . . . . . . . . . . . . 7-18Figure 7-6 DC Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-19Figure 7-7 Power Screw Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-19Figure 7-8 Pan Head Screw Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-20Figure 7-9 Recommended Hub Wire Routing . . . . . . . . . . . . . . . . . . . . . . . . . 7-20Figure 7-10 Compression Lug and Mounting Screw Locations . . . . . . . . . . . . 7-21Figure 7-11 Grounding Wire Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-22Figure 7-12 Power Wires and Studs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-22Figure 7-13 Wire Polarity Illustration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-23Figure 7-14 DC Illustration Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-23Figure 7-15 Flush Mounting Bracket Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-25Figure 7-16 Bracket Detail For Wall Mount Rack (PN 4712) . . . . . . . . . . . . . . 7-26Figure 7-17 Using Hub Rack-Mounting Brackets for Direct Wall Installation . 7-27Figure 7-18 Installing Directly to the Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-28Figure 7-19 Internet Protocol (TCP/IP) Properties Window . . . . . . . . . . . . . . . 7-35Figure 7-20 Local Area Connection Properties Window . . . . . . . . . . . . . . . . . . 7-36Figure 7-21 Set Time and Date Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-37Figure 7-22 AdminBrowser Configuration Window . . . . . . . . . . . . . . . . . . . . . 7-37Figure 7-23 AdminBrowser Configuration Window (continued) . . . . . . . . . . . 7-38Figure 7-24 Simplex Base Station to a Fusion Wideband Main Hub . . . . . . . . 7-43Figure 7-25 Duplex Base Station to a Fusion Wideband Main Hub . . . . . . . . . 7-44Figure 7-26 Connecting a Fusion Wideband Main Hub to Multiple Base Stations 7-45Figure 7-27 Connecting a Fusion Wideband Main Hub to a Roof-top Antenna 7-46Figure 7-28 Connecting Two Fusion Wideband Main Hub’s RF Band Ports o a Simplex Repeater or Base Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-49Figure 7-29 Connecting Two Fusion Wideband Main Hub’s RF Band Ports to a Duplex Repeater or Base Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-52Figure 7-30 Connecting MetroReach to Fusion Wideband . . . . . . . . . . . . . . . 7-54Figure 7-31 Using a BTS to Monitor Fusion Wideband . . . . . . . . . . . . . . . . . . 7-55Figure 7-32 Using a BTS and AdminBrowser to Monitor Fusion Wideband . . 7-56Figure 7-33 Using Fusion Wideband to Monitor Unison . . . . . . . . . . . . . . . . . 7-57Figure 7-34 Alarm Sense Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-58Figure 7-35 5-port Alarm Daisy-Chain Cable . . . . . . . . . . . . . . . . . . . . . . . . . . 7-59Figure 7-36 Alarm Sense Adapter Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-60Figure 7-37 OA&M Direct Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-61Figure 7-38 OA&M Modem Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-62Figure 7-39 Default Dial-in Settings (Fusion Wideband Hub) . . . . . . . . . . . . . 7-63Figure 7-40 Network Connections Window . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-64
CONFIDENTIALInterReach Fusion Wideband Installation, Operation, and Reference Manual 3D-620616-0-20 Rev AFigure 7-41 New Connection Wizard - Welcome Window . . . . . . . . . . . . . . . . .7-64Figure 7-42 New Connection Wizard - Network Connection Type Window . . .7-65Figure 7-43 New Connection Wizard - Network Connection Window . . . . . . .7-65Figure 7-44 New Connection Wizard - Connection Name Window . . . . . . . . . .7-66Figure 7-45 New Connection Wizard - Phone Number to Dial Window . . . . . .7-66Figure 7-46 New Connection Wizard - Connection Availability Window . . . . .7-67Figure 7-47 New Connection Wizard - Completing New Connection Window .7-67Figure 7-48 Connect Fusion Wideband Hub Window . . . . . . . . . . . . . . . . . . . .7-68Figure 7-49 Fusion Wideband Hub Properties Window . . . . . . . . . . . . . . . . . . .7-68Figure 7-50 Modem Configuration Window . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-69Figure 7-51 Fusion Wideband Hub Properties - Security Tab Window . . . . . . .7-69Figure 7-52 Fusion Wideband Hub Properties - Networking Tab Window . . . .7-70Figure 7-53 Internet Protocol Properties Window . . . . . . . . . . . . . . . . . . . . . . . .7-70Figure 7-54 OA&M Connection using a 232 Port Expander . . . . . . . . . . . . . . .7-71Figure 7-55 OA&M Connection Using a POTS Line Sharing Switch . . . . . . . .7-72Figure 7-56 Cascading Line Sharing Switches . . . . . . . . . . . . . . . . . . . . . . . . . .7-73Figure 7-57 OA&M Connection Using Ethernet and ENET/232 Serial Hub . . .7-74Figure 7-58 Fusion Wideband SNMP Configuration Options . . . . . . . . . . . . . .7-75Figure A-1 CommScope 2065V for RG-59 . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2Figure A-2 CommScope 2279V for RG-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3Figure A-3 CommScope 2293K for RG-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4Figure A-1 Standard Modem Cable Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-7Figure A-2 Wiring Map for TCP/IP Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8Figure A-3 DB-9 Female to DB-9 Female Null Modem Cable Diagram . . . . . A-9
CONFIDENTIAL4InterReach Fusion Wideband Installation, Operation, and Reference ManualD-620616-0-20 Rev A
InterReach Fusion Wideband Installation, Operation, and Reference Manual 1D-620616-0-20 Rev A CONFIDENTIALList of TablesTable 2-1 Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9Table 2-2 Wavelength and Laser Power Specifications . . . . . . . . . . . . . . . . . . . 2-10Table 2-3 Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10Table 2-4 Frequency Bands Covered by Fusion Wideband RAUs . . . . . . . . . . . 2-10Table 2-5 2500 MHz RF End-to-End Performance . . . . . . . . . . . . . . . . . . . . . . . 2-11Table 2-6 2500 MHz RF End-to-End Performance . . . . . . . . . . . . . . . . . . . . . . . 2-11Table 3-1 Fusion Wideband Hub Status LED States . . . . . . . . . . . . . . . . . . . . . . . 3-7Table 3-2 Fusion Wideband Hub Port LED States . . . . . . . . . . . . . . . . . . . . . . . . 3-7Table 3-3 9-pin D-sub Pin Connector Functions . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9Table 3-4 Main Hub Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10Table 4-1 Expansion Hub Unit Status and DL/UL Status LED States . . . . . . . . . 4-5Table 4-2 Fusion Wideband Expansion Hub Port LED States . . . . . . . . . . . . . . . 4-7Table 4-3 9-pin D-sub Pin Connector Functions . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8Table 4-4 Expansion Hub Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10Table 5-1 Frequency Bands Covered by Fusion Wideband RAUs . . . . . . . . . . . . 5-3Table 5-2 System Gain (Loss) Relative to CATV Cable Length . . . . . . . . . . . . . . 5-4Table 5-3 Remote Access Unit LED States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6Table 5-4 Remote Access Unit Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7Table 6-1 WiMAX Power per Carrier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5Table 6-2 System Gain (Loss) Relative to CATV Cable Length . . . . . . . . . . . . . . 6-7Table 6-3 Coaxial Cable Losses (Lcoax) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8Table 6-4 Average Signal Loss of Common Building Materials . . . . . . . . . . . . . 6-9Table 6-5 Frequency Bands and the Value of the First Term in Equation (3) . . . 6-10Table 6-6 Estimated Path Loss Slope for Different In-Building Environments . 6-10Table 6-7 Approximate Radiated Distance from Antenna for 1800 MHz DCS Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11Table 6-8 Approximate Radiated Distance from Antenna for 2.1 GHz UMTS Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11
CONFIDENTIAL2InterReach Fusion Wideband Installation, Operation, and Reference ManualD-620616-0-20 Rev ATable 6-9 Link Budget Considerations for Narrowband Systems . . . . . . . . . . . . 6-15Table 6-10 Narrowband Link Budget Analysis: Downlink . . . . . . . . . . . . . . . . . . 6-17Table 6-11 Narrowband Link Budget Analysis: Uplink . . . . . . . . . . . . . . . . . . . .6-18Table 6-12 Distribution of Power within a CDMA Signal . . . . . . . . . . . . . . . . . . 6-19Table 6-13 Additional Link Budget Considerations for CDMA . . . . . . . . . . . . . . 6-20Table 6-14 CDMA Link Budget Analysis: Downlink . . . . . . . . . . . . . . . . . . . . . . 6-22Table 6-15 CDMA Link Budget Analysis: Uplink . . . . . . . . . . . . . . . . . . . . . . . . 6-24Table 7-1 Distance Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3Table 7-2 Installation Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6Table 7-3 Tools and Materials Required for Component Installation . . . . . . . . . . 7-8Table 7-4 Optional Accessories for Component Installation . . . . . . . . . . . . . . . . . 7-9Table 7-5 Troubleshooting Main Hub LEDs During Installation . . . . . . . . . . . . 7-24Table 7-6 Troubleshooting Expansion Hub LEDs During Installation . . . . . . . . 7-31Table 7-7 Troubleshooting RAU LEDs During Installation . . . . . . . . . . . . . . . . 7-34Table 7-8 Alarm Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-53Table 9-1 Troubleshooting Main Hub Port LEDs During Normal Operation . . . . 9-6Table 9-2 Troubleshooting Main Hub Status LEDs During Normal Operation . . 9-7Table 9-3 Troubleshooting Expansion Hub Port LEDs During Normal Operation 9-8Table 9-4 Troubleshooting Expansion Hub Status LEDs During Normal Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-9Table 9-5 Summary of CATV Cable Wiring Problems . . . . . . . . . . . . . . . . . . . .9-10Table C-2 Faults for System CPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-5Table C-4 Faults for RAUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-8Table C-5 Warnings/Status Messages for Fusion Wideband Main Hubs . . . . . . .C-11Table C-6 Warning/Status Messages for System CPUs . . . . . . . . . . . . . . . . . . . .C-15Table C-8 Warning/Status Messages for RAUs . . . . . . . . . . . . . . . . . . . . . . . . . .C-19
InterReach Fusion Wideband Installation, Operation, and Reference Manual 1-1D-620616-0-20 Rev A CONFIDENTIALSECTION 1 General InformationThis section contains the following subsections:• Section 1.1 Firmware Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1• Section 1.2 Purpose and Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1• Section 1.3 Conventions in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2• Section 1.4 Standards Conformance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3• Section 1.5 Related Publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-31.1 Firmware ReleaseFor the latest Software and Firmware Release and associated documentation, access the LGC Wireless Customer Portal at lgcwireless.com.1.2 Purpose and ScopeThis document describes the InterReach Fusion Wideband system.• Section 2 InterReach Fusion Wideband System DescriptionThis section provides an overview of the Fusion Wideband hardware and OA&M capabilities. This section also contains system specifications and RF end-to-end performance tables.• Section 3 Fusion Wideband Main HubThis section illustrates and describes the Fusion Wideband Main Hub. This section includes connector and LED descriptions, and unit specifications.
Conventions in this Manual1-2 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A• Section 4 Fusion Wideband Expansion HubThis section illustrates and describes the Expansion Hub, as well as connector and LED descriptions, and unit specification.• Section 5 Remote Access UnitThis section illustrates and describes the Remote Access Unit. This section also includes connector and LED descriptions, and unit specifications.• Section 6 Designing a Fusion Wideband SolutionThis section provides tools to aid you in designing your Fusion Wideband system, including tables of the maximum output power per carrier at the RAU and formu-las and tables for calculating path loss, coverage distance, and link budget.• Section 7 Installing Fusion WidebandThis section provides installation procedures, requirements, safety precautions, and checklists. The installation procedures include guidelines for troubleshooting using the LEDs as you install the units.• Section 8 Replacing Fusion Wideband ComponentsThis section provides installation procedures and considerations when you are replacing an Fusion Wideband component in an operating system.• Section 9 Maintenance, Troubleshooting, and Technical AssistanceThis section provides contact information and troubleshooting tables.• Appendix A Cables and ConnectorsThis appendix provides connector and cable descriptions and requirements. It also includes cable strapping, connector crimping tools, and diagrams.• Appendix B ComplianceThis section lists safety and radio/EMC approvals.• Appendix C Faults, Warnings, Status TablesThis section lists all system alarm messages.1.3 Conventions in this ManualThe following table lists the type style conventions used in this manual.Convention Descriptionbold Used for emphasisBOLD CAPS Labels on equipmentSMALL CAPS Software menu and window selections
Help Hot Line (U.S. only): 1-800-530-9960 1-3D-620616-0-20 Rev A CONFIDENTIALStandards ConformanceThis manual lists measurements first in metric units, and then in U.S. Customary Sys-tem of units in parentheses. For example:0° to 45°C (32° to 113°F)This manual uses the following symbols to highlight certain information as described.NOTE: This format emphasizes text with special significance or impor-tance, and provides supplemental information.CAUTION: This format indicates when a given action or omitted action can cause or contribute to a hazardous condition. Damage to the equipment can occur.WARNING: This format indicates when a given action or omitted action can result in catastrophic damage to the equipment or cause injury to the user.ProcedureThis format highlights a procedure.1.4 Standards Conformance• Fusion Wideband uses the TIA-570-B cabling standards for ease of installation.• Refer to Appendix B for compliance information.1.5 Related Publications• AdminBrowser User Manual, LGC Wireless part number D-620607-0-20•MetroReach Focus Configuration, Installation, and Reference Manual; LGC Wireless part number 8500-10•InterReach Unison Installation, Operation, and Reference Manual; LGC Wireless part number 8700-50
Related Publications1-4 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A
InterReach Fusion Wideband Installation, Operation, and Reference Manual 2-1D-620616-0-20 Rev A CONFIDENTIALSECTION 2 InterReach Fusion Wideband System DescriptionThis section contains the following subsections:• Section 2.1 System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1• Section 2.2 System Hardware Description . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3• Section 2.3 System OA&M Capabilities Overview . . . . . . . . . . . . . . . . . . . . 2-5• Section 2.4 System Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7• Section 2.5 System Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8• Section 2.6 System Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-92.1 System OverviewInterReach Fusion Wideband is an intelligent fiber optics/CATV, multi-band (fre-quencies) wireless networking system designed to handle both wireless voice and data communications over licensed frequencies. It provides high-quality, ubiquitous, seamless access to the wireless network in smaller buildings.Fusion Wideband provides RF characteristics designed for large public and private facilities such as campus environments, airports, shopping malls, subways, conven-tion centers, sports venues, and so on. Fusion Wideband uses microprocessors to enable key capabilities such as software-selectable band settings, automatic gain con-trol, ability to incrementally adjust downlink/uplink gain, end-to-end alarming of all components and the associated cable infrastructure, and a host of additional capabili-ties.The Fusion Wideband system supports major wireless standards and air interface pro-tocols in use around the world, including:• Frequencies: 850 MHz, 900 MHz, 1800 MHz, 1900 MHz, 2100 MHz• Voice Protocols: AMPS, TDMA, CDMA, GSM/EGSM,WCDMA
System Overview2-2 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A• Data Protocols: CDPD, EDGE, GPRS, WCDMA, CDMA2000, 1xRTT, EV-DO, and PagingThe Fusion Wideband system supports two configurable bands:• Band 1 in 60 MHz and can be configured for 2100 MHz• Band 2 in 75 MHz and can be configured for 1800 MHzBoth bands support all protocols.Refer to Table 2-4 for a specific list of supported RAUs.Key System Features• Multi-Band, supports two full band frequencies for spectrum growth.•Superior RF performance, particularly in the areas of IP3 and noise figure.•High downlink composite power and low uplink noise figure enables support of a large number of channels and larger coverage footprint per antenna.•Software configurable Main and Expansion Hubs allow the frequency bands to be configured in the field.•Either single-mode or multi-mode fiber can be used, supporting flexible cabling alternatives (in addition to standard CATV 75 Ohm cabling). You can select the cabling type to met the resident cabling infrastructure of the facility and unique building topologies.•Extended system “reach.” Using single-mode fiber, fiber runs can be a long as 6 kilometers (creating a total system “wingspan” of 12 kilometers). Alternatively, with multi-mode fiber, fiber runs can be as long as 500 meters.•Standard 75 Ohm CATV cable, can be run up to 130 meters for RG-59 cable (140 meters for RG-6; 235 meters for RG-11 using CommScope 2065V, 2279V, and 2293K cables).•Flexible RF configuration capabilities, including:• System gain:– Ability to manually set gain in 1 dB steps, from 0 to 15 dB, on both down-link and uplink.•RAU:– RAU uplink and downlink gain can be independently attenuated 10 dB in 1 dB steps.– Uplink level control protects the system from input overload and can be optimized for either a single operator or multiple operators/protocols.– VSWR check on RAU reports if there is a disconnected antenna.•Firmware Updates are downloaded (either locally or remotely) to the system when any modifications are made to the product, including the addition of new software capabilities and services.
Help Hot Line (U.S. only): 1-800-530-9960 2-3D-620616-0-20 Rev A CONFIDENTIALSystem Hardware Description•OA&M capabilities, including fault isolation to the field replaceable unit, report-ing of all fault and warning conditions, and user-friendly web browser user inter-face OA&M software package.2.2 System Hardware DescriptionThe InterReach Fusion Wideband system consists of three modular components:• 19" rack-mountable Main Hub (connects to up to 4 Expansion Hubs, except for the One Port Main Hub configuration that supports 1 Expansion Hub)• Converts RF signals to optical IF on the downlink; optical IF-to-RF on the uplink• Microprocessor controlled (for alarms, monitoring, and control)• Auto-configurable bands• Simplex interface to RF source• Periodically polls all downstream RAUs for system status, and automatically reports any fault or warning conditions•19” rack mountable Expansion Hub (connects to up to 8 Remote Access Units)• Optical signal conversion to electrical on the downlink; electrical to optical on the uplink• Microprocessor controlled (for alarms, monitoring, and control)• Software configurable band (based on commands from the Main Hub)• Supplies DC power to RAUs over CATV cable.•Remote Access Unit (RAU)• Converts IF signals to RF on the downlink; RF-to-IF on the uplink• Microprocessor controlled (for alarms, monitoring, and control)• Multi-band protocol independent, frequency specific unitsThe minimum configuration of a Fusion Wideband system is one Main Hub, one Expansion Hub, and one RAU (1-1-1). The maximum configuration of a system is one Main Hub, four Expansion Hubs, and 32 RAUs (1-4-32). Multiple systems can be combined to provide larger configurations.NOTE: The Fusion Wideband One Port Main Hub (PN: FSN-W1-MH-1P) configuration is a cost reduced version of the Fusion Wideband Main Hub and supports only one Expansion Hub (up to 8 RAUs).The Fusion Wideband One Port Main Hub is “software locked” to 1 port 2 fiber ports. Additional ports are disabled internally. Please do not attempt to
System Hardware Description2-4 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev Aremove the front panel fiber port plate, since doing so will void the product warranty.Figure 2-1 Fusion Wideband System HardwareFigure 2-2 Fusion Wideband One Port System Hardware
Help Hot Line (U.S. only): 1-800-530-9960 2-5D-620616-0-20 Rev A CONFIDENTIALSystem OA&M Capabilities Overview2.3 System OA&M Capabilities OverviewInterReach Fusion Wideband is microprocessor controlled and contains firmware to enable much of the operations, administration, and maintenance (OA&M) functionality.Complete alarming, down to the field replaceable unit (that is, Fusion Wideband Main Hub, Expansion Hub, and Remote Access Unit) and the cabling infrastructure, is available. All events occurring in a system, defined as a Fusion Wideband Main Hub and all of its associated Expansion Hubs and Remote Access Units, are automat-ically reported to the Main Hub. The Main Hub monitors system status and communi-cates that status using the following methods:• Normally closed (NC) alarm contact closures can be tied to standard NC alarm monitoring systems or directly to a base station for basic alarm monitoring.• Connection Methods:• The Main Hub’s front panel RJ-45 port connects directly to a PC (for local Ethernet access). • The Main Hub’s front panel RS-232 serial port connects directly to a modem (for remote access). • Remote access is also available with an optional 100BASE-T LAN switch con-nections to the RJ-45 port.Figure 2-3 Three Methods for OA&M CommunicationsAdminBrowser OA&M software runs on the Fusion Wideband Main Hub micropro-cessor and communicates to its downstream Expansion Hubs and associated RAUs. Using AdminBrowser, you can perform the following from any standard web browser (Internet Explorer) running on your PC/laptop system:• Configure a newly installed system• Change system parametersPSTNRS-232RS-232 EthernetPC/Laptoprunning a ModemFusion Wideband Main HubModemFusion Wideband Main HubEthernetLANSwitchF-conn.Fusion Wideband Main HubFusion Wideband Main HubStandard BrowserUse AdminBrowser to configureor monitor a local or a remoteFusion Wideband system.TCP/IP123RJ-45 EthernetAdmin BrowserRS-232Modem
System OA&M Capabilities Overview2-6 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A• Perform an end-to-end system test• Query system status Refer to the AdminBrowser User Manual (D-620607-0-20) for information about installing and using AdminBrowser software.2.3.1 System Monitoring and ReportingEach Fusion Wideband Main Hub in the system constantly monitors itself, its Expan-sion Hubs, and their downstream RAUs for internal fault and warning conditions. The results of this monitoring are stored in memory and compared against new results.When a Main or Expansion Hub detects a change in status, it reports a fault or warn-ing alarm. Faults are also indicated locally by red status LEDs. Both faults and warn-ings are reported to AdminBrowser software and displayed on a PC/laptop connected to the Main Hub’s RJ-45 port. Passive antennas connected to the RAUs are not moni-tored automatically. Perform a System Test to retrieve status information about antennas.Using AdminBrowser, you can install a new system or new components, change sys-tem parameters, and query system status. Figure 2-4 illustrates how the system reports its status to AdminBrowser.Figure 2-4 System Monitoring and Reporting 2.3.2 Using Alarm ContactsYou can connect the DB-9 female connector on the rear panel of the Fusion Wide-band Main Hub to a local base station or to a daisy-chained series of Fusion and/or MetroReach Focus systems.Each RAU passes its status to the Hub.If a fault is detected, the ALARM LED is red. If no fault is detected, the LED is green.The Expansion Hub queries the status of each RAU and compares it to the previously stored status.If a fault is detected, LEDs on the front panel turn red.Fusion WidebandMain HubAdminBrowserRAURAUUse a standardbrowser to communi-cate with remotely or locally installed Fusion Wideband systems run-ning AdminBrowser.If a fault or warning condition is reported, the AdminBrowser graphical user inter-face indicates the prob-lem on your standard PC browser.web browserFusion WidebandExpansionHubPC/Laptoprunning astandardThe Main Hub queries status of each Expan-sion Hub and each RAU and compares it to previously stored status. If a fault is detected, LEDs on the front panel turn red.AdminBrowser
Help Hot Line (U.S. only): 1-800-530-9960 2-7D-620616-0-20 Rev A CONFIDENTIALSystem ConnectivityWhen you connect MetroReach Focus or a BTS to the Fusion Wideband, the Fusion Wideband Main Hub outputs the alarms (alarm source) and MetroReach Focus or the BTS receives the alarms (alarm sense). This is described in Section 7.7.1 on page 7-54.2.4 System ConnectivityThe double star architecture of the Fusion Wideband system, illustrated in Figure 2-5, provides excellent system scalability and reliability. The system requires only one pair of fibers for eight antenna points. This makes any system expansion, such as add-ing an extra antenna for additional coverage, potentially as easy as pulling an extra CATV cable.Figure 2-5 Fusion Wideband’s Double Star ArchitectureMain HubRS-232PORT 1 PORT 2 PORT 3 PORT 4Expansion Hub Expansion HubFiberExpansion HubExpansion HubCATVCATV (RG-59, 6, or 11) CATVup to 8 RAUs per Expansion HubRAU RAU RAURJ-45
System Operation2-8 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A2.5 System OperationFigure 2-6 Downlink (Base Station to Wireless Devices)Figure 2-7 Uplink (Wireless Devices to Base Station)Main HubRAUThe Main Hub receives downlink RF signals from a base station using 50 Ohm coaxial cable.The Main Hub converts the RF signals to IF, then to optical signals and sends them to Expansion Hubs (up to four) using optical fiber cable.The Expansion Hub converts the optical sig-nals to electrical signals and sends them to RAUs (up to eight) using 75 Ohm CATV cable.The RAU converts the IF signals to RF and sends them to passive antennas using 50 Ohm coaxial cable.Expansion HubMain HubRAUThe Main Hub sends uplink RF signals to a base station using 50 Ohm coaxial cable.The Main Hub receives the optical signals from the Expansion Hubs (up to four) using optical fiber cable and con-verts them to RF sig-nals.The Expansion Hub receives the IF signals from the RAUs (up to eight) using CATV cable and converts them to optical signals.The RAU receives uplink RF signals from the passive antenna using 50 Ohm coaxial cable and converts them to IF signals.Expansion Hub
Help Hot Line (U.S. only): 1-800-530-9960 2-9D-620616-0-20 Rev A CONFIDENTIALSystem Specifications2.6 System SpecificationsTable 2-1 Physical SpecificationsParameter Main Hub Expansion Hub Remote Access UnitIF/RF Connectors 4-type “N”, female (50 Ohm), 1 Downlink/Uplink pair per band 8-type “F”, female (CATV 75 Ohm) One F, female (CATV -75 Ohm)One N, female (coaxial - 50 Ohm)External Alarm Connector (contact source) One, 9-pin D-sub, female One, 9-pin D-sub, female —ADMIN/LAN Interface Connectors One RJ-45, femaleOne 9-pin D-sub, male for optional modemOne RJ-45, femaleOne 9-pin D-sub, male—Fiber Connectors**It is critical to system performance that only SC/APC fiber connectors are used throughout the fiber network, including fiber distribution panels.4 pair, SC/APC One pair, SC/APC —LED Alarm and Status Indicators Unit Status (One pair):•Power• Main Hub StatusDownstream Unit Status (One per fiber port):• Expansion Hub/RAUUnit Status (One pair):•Power• Expansion Hub StatusFiber Link Status (One pair):•DL Status•UL StatusPort Status:• One per F connector port•Link/RAUUnit Status (One pair):•Link•AlarmPower (AC Option)Power (DC Option)Rating: 100–240V AC, 1A, 50–60 HzOperating Range: 90–132V AC/170-250V AC auto-rangingRating: 38–64V DC, 2.5ARating: 100–240V AC, 6A, 50–60 HzOperating Range: 90–132V AC/170-250V AC auto-ranging—Power Consumption (W) 30 4 RAUs: 305 typical8 RAUs: 530 typical—Enclosure Dimensions†(height × width × depth)†Excluding angle-brackets for 19'' rack mounting of hub.Note: The Fusion Wideband Main Hub’s typical power consumption assumes that the CATV RG-59 cable length is no more than 130 meters, the RG-6 cable length is no more than 140 meters, and RG-11 cable length is no more than 235 meters using CommScope 2065V, 2279V, a nd 2293K cables.89 mm × 438 mm × 381 mm(3.5 in. × 17.25 in. × 15 in.) (2U)89 mm × 438 mm × 381 mm(3.5 in. × 17.25 in. × 15 in.) (2U)54 mm x 286 mm x 281 mm(2.13 in. × 11.25 in. × 11.13 in.)Weight < 5.5 kg (< 12 lbs.) < 6.6 kg (< 14.5 lbs.) < 2.1 kg (< 4.6 lbs.)
System Specifications2-10 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A2.6.1 RF End-to-End PerformanceThe following tables list the RF end-to-end performance of each protocol.NOTE: The system gain is adjustable in 1 dB steps from 0 to 15 dB, and the gain of each RAU can be attenuated up to 10 dB in 1dB steps.Table 2-2 Wavelength and Laser Power SpecificationsMeasured Output PowerWavelength Main Hub Expansion Hub1310 nm +20 nm 890 uW 3.8 mWTable 2-3 Environmental SpecificationsParameter Main Hub and Expansion Hub RAUOperating Temperature 0° to +45°C (+32° to +113°F) –25° to +45°C (–13° to +113°F)Non-operating Tempera-ture –20° to +85°C (–4° to +185°F) –25° to +85°C (–13° to +185°F)Operating Humidity; non-condensing 5% to 95% 5% to 95%Table 2-4 Frequency Bands Covered by Fusion Wideband RAUs Fusion Wideband RAU Part NumberFusion WidebandBandRF PassbandDownlink (MHz) Uplink (MHz)MAIN HUB/RAU BandRAU Band-width2500/2500 FSN-2500-1-WMAX 2500 2496-2690 2694–2690 1 60 MHz2500 2496–2690 2694–2690 2 60 MHz
Help Hot Line (U.S. only): 1-800-530-9960 2-11D-620616-0-20 Rev A CONFIDENTIALSystem Specifications2500/2500 RAUTable 2-5 2500 MHz RF End-to-End PerformanceTypicalParameter Downlink UplinkAverage gain with 130 m RG-59 at 25°C (77°F) (dB) 15 15Ripple with 130 m RG-59 (dB) 4.5 4.5Output IP3 (dBm) 38Input IP3 (dBm) –5Output 1 dB Compression Point (dBm) 26Noise Figure 1 MH, 1 EH, 8 RAUs (dB) 17Noise Figure 1 MH, 4 EH, 32 RAUs (dB) 23Table 2-6 2500 MHz RF End-to-End PerformanceTypicalParameter Downlink UplinkAverage gain with 130 m RG-59 at 25°C (77°F) (dB) 15 15Ripple with 130 m RG-59 (dB) 4.5 4.5Output IP3 (dBm) 38Input IP3 (dBm) –5Output 1 dB Compression Point (dBm) 26Noise Figure 1 MH, 1 EH, 8 RAUs (dB) 17Noise Figure 1 MH, 4 EH, 32 RAUs (dB) 23
System Specifications2-12 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A
InterReach Fusion Wideband Installation, Operation, and Reference Manual 3-1D-620616-0-20 Rev A CONFIDENTIALSECTION 3 Fusion Wideband Main HubThis section contains the following subsections:• Section 3.1 Fusion Wideband Main Hub Overview . . . . . . . . . . . . . . . . . . . . 3-1• Section 3.2 Fusion Wideband Main Hub Front Panel . . . . . . . . . . . . . . . . . . . 3-4• Section 3.3 Fusion Wideband Main Hub Rear Panel . . . . . . . . . . . . . . . . . . . 3-8• Section 3.4 Main Hub Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10• Section 3.5 Faults, Warnings, and Status Messages . . . . . . . . . . . . . . . . . . . 3-113.1 Fusion Wideband Main Hub OverviewThe Fusion Wideband Main Hub (shown in Figure 3-1) distributes two individual (Band 1 and 2) downlink RF signals from a base station, repeater, or MetroReach Focus system to up to four Expansion Hubs, which in turn distribute the signals to up to 32 Remote Access Units. The Main Hub also combines uplink signals from the associated Expansion Hubs.Fusion Wideband is a multi-band system. One RF source (Band 1 or RF1) goes to the 60 MHz band and the other RF source (Band 2 or RF2) goes to the 75 MHz band. The system installs in a 19" equipment rack and is usually co-located with the RF source in a telecommunications closet.
Fusion Wideband Main Hub Overview3-2 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AFigure 3-1 Main Hub in a Fusion Wideband SystemFigure 3-2 shows a detailed view of the major RF and optical functional blocks of the Main Hub.NOTE: The Fusion Wideband One Port Main Hub (PN: FSN-W1-MH-1P) configuration is a cost reduced version of the Fusion Wideband Main Hub and supports only one Expansion Hub (up to 8 RAUs).Fusion Wideband Main Hub Fusion Wideband Expansion Hub RAUDownlink Path: The Main Hub receives 2 individual (Band1 and 2) downlink RF signals from a base station, repeater, or MetroReach Focus system using 50 Ohm coaxial cable. It converts the signals to IF then to optical and sends them to up to four Expansion Hubs using fiber optic cable.The Main Hub also sends OA&M communication to the Expansion Hubs using the fiber optic cable. The Expansion Hubs, in turn, communicate the OA&M information to the RAUs using CATV cable.Uplink Path: The Main Hub receives uplink optical signals from up to four Expansion Hubs using fiber optic cables. It con-verts the signals to IF then to RF and sends them to the respective Band1 and 2 base station, repeater, or MetroReach Focus system using 50 Ohm coaxial cable.The Main Hub also receives status information from the Expansion Hubs and all RAUs using the fiber optic cable.Downlink to Main HubUplink from Main HubDownlink from Main HubUplink to Main HubRF1 and 2RF1 and 2
Help Hot Line (U.S. only): 1-800-530-9960 3-3D-620616-0-20 Rev A CONFIDENTIALFusion Wideband Main Hub OverviewFigure 3-2 Main Hub Block DiagramCAL Tone
Fusion Wideband Main Hub Front Panel3-4 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A3.2 Fusion Wideband Main Hub Front PanelFigure 3-3 Fusion Wideband Main Hub Front Panel1. Four fiber optic ports (labeled PORT 1, PORT 2, PORT 3, PORT 4)• One standard female SC/APC connector per port for MMF/SMF input (labeled UPLINK)• One standard female SC/APC connector per port for MMF/SMF output (labeled DOWNLINK)2. Four sets of fiber port LEDs (one set per port)• One LED per port for port link status and downstream unit status 3. One set of unit status LEDs• One LED for unit power status (labeled POWER)• One LED for unit status (labeled MAIN HUB STATUS)4. One 9-pin D-sub male connector for system remote dial-up communication and diagnostics using a modem (labeled MODEM)5. One RJ-45 female connector for system communication and diagnostics using a PC/laptop with direct connect or using a LAN switch (labeled ADMIN/LAN)6. Power switchNOTE: The Fusion Wideband One Port Main Hub (PN: FSN-W1-MH-1P) configuration is a cost reduced version of the Fusion Wideband Main Hub and supports only one Expansion Hub (up to 8 RAUs).123645121212InterReachWideband FusionMain Hub
Help Hot Line (U.S. only): 1-800-530-9960 3-5D-620616-0-20 Rev A CONFIDENTIALFusion Wideband Main Hub Front Panel3.2.1 Optical Fiber Uplink/Downlink PortsThe optical fiber uplink/downlink ports transmit and receive optical signals between the Main Hub and up to four Expansion Hubs using industry-standard SMF or MMF cable. There are four fiber ports on the front panel of the Main Hub; one port per Expansion Hub. Each fiber port has two female SC/APC connectors:• Optical Fiber Uplink ConnectorThis connector (labeled UPLINK) is used to receive the uplink optical signals from an Expansion Hub.• Optical Fiber Downlink ConnectorThis connector (labeled DOWNLINK) is used to transmit the downlink optical sig-nals to an Expansion Hub.CAUTION: To avoid damaging the Main Hub’s fiber connector ports, use only SC/APC fiber cable connectors when using either single-mode or multi-mode fiber. Additionally, it is critical to system performance that only SC/APC fiber connectors are used throughout the fiber network, includ-ing fiber distribution panels.3.2.2 Communications RS-232 Serial ConnectorRemote MonitoringUse a standard serial cable to connect a modem to the 9-pin D-sub male serial con-nector for remote monitoring or configuring. The cable typically has a DB-9 female and a DB-9 female connector. Refer to Appendix A.6 on page A-9 for the cable pinout diagram.Remote monitoring is also available by connecting the RJ-45 (ADMIN/LAN) port to a LAN switch for remote Ethernet LAN access or direct dial-up router access.Local MonitoringUse a crossover Ethernet cable (PN-4069-ADB) to connect a laptop or PC to the RJ-45 female connector for local monitoring or configuring using the AdminBrowser resident software. The cable typically has a RJ-45 male connector on both ends. Refer to Appendix A.5 on page A-8 for the cable pinout.3.2.3 Main Hub LED IndicatorsThe unit’s front panel LEDs indicate faults and commanded or fault lockouts. The LEDs do not indicate warnings or whether the system test has been performed. Use the LEDs to provide basic information only, or as a backup when you are not using Admin-Browser.
Fusion Wideband Main Hub Front Panel3-6 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AUpon power up, the Main Hub goes through a 20-second test to check the LED lamps. During this time, the LEDs blink through the states shown in Table 3-1, letting you visually verify that the LED lamps and the firmware are functioning properly. Upon completion of initialization, the LEDs stay in one of the first two states shown in Table 3-1.The Main Hub automatically sends the program bands command to all connected RAUs. A mismatched band causes a fault message to be displayed in AdminBrowser and places the RAU in a disabled condition.NOTE: Refer to Section 9.3.2 for troubleshooting using the LEDs.NOTE: AdminBrowser should be used for troubleshooting the system. Only use LEDs for backup or confirmation. However, if there are communi-cation problems within the system, the LEDs may provide additional infor-mation that is not available using AdminBrowser.Unit Status LEDsThe Main Hub has one pair of status LEDs, labeled POWER and STATUS, which can be in one of the states shown in Table 3-1. These LEDs can be:steady greensteady redoff - no color (valid only during 90 second power cycle)flashing red (60 ppm)There is no off state when the unit’s power is on.
Help Hot Line (U.S. only): 1-800-530-9960 3-7D-620616-0-20 Rev A CONFIDENTIALFusion Wideband Main Hub Front PanelFiber Port LEDsThe Main Hub has one fiber port LED for each of the four fiber ports. The LED can be in one of the states shown in Table 3-2. This LED can be:offsteady greensteady redflashing red (60 ppm)Table 3-1 Fusion Wideband Hub Status LED States LED State IndicatesGreenGreen• The Main Hub is connected to power and all power supplies are operating.• The Main Hub is not reporting a fault; however, the system test may need to be performed or a warning condition may exist. Use AdminBrowser to deter-mine this.GreenRed• The Main Hub is connected to power and all power supplies are operating. Use AdminBrowser to power status.• The Main Hub is reporting a fault.GreenGreen (60-ppm)• The Main Hub is connected to power and all power supplies are operating.Use Admin Browser to determine power status.• The Main Hub is reporting a lockout condition.GreenRed (60-ppm)• The Main Hub is connected to power and all power supplies are operating.• The Main Hub DL input signal level is too high.RedRed• One or more power supplies are out-of-specification.Table 3-2 Fusion Wideband Hub Port LED States LED State IndicatesOff • The Expansion Hub is not connected.Green • The Expansion Hub is connected.• There are no faults from the Expansion Hub or any connected RAU.Red (60 PPM) • There was a loss of communications with the Expansion Hub.POWERSTATUSPOWERSTATUSPOWERSTATUSPOWERSTATUSPOWERSTATUSPORTPORTPORT
Fusion Wideband Main Hub Rear Panel3-8 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A3.3 Fusion Wideband Main Hub Rear PanelFigure 3-4 Fusion Wideband Main Hub Rear Panel1. AC power cord connector2. Two air exhaust vents3. Two N-type, female connectors for each band (Band 1 and Band 2):• Uplink (labeled UL1 and UL2)• Downlink (labeled DL1 and DL2)4. One 9-pin D-sub female connector for contact alarm monitoring (labeled ALARMS)5. Ground lug for connecting unit to frame ground (labeled GROUND)3.3.1 Fusion Wideband Main Hub Rear Panel Connectors3.3.1.1 9-pin D-sub ConnectorThe 9-pin D-sub connector (labeled ALARMS) provides a contact alarm for fault and warning system alarm monitoring.Red (Steady) • The Expansion Hub is disconnected.• The Expansion Hub or any connected RAU reported a fault.Green (60-ppm) • The Expansion Hub or any connected RAU reported a lockout condition.Table 3-2 Fusion Wideband Hub Port LED States (continued)LED State IndicatesPORTPORT123Band 1 Band 2 Band 3UL1 UL2 UL3DL1 DL2 DL345AC PowerAlarms
Help Hot Line (U.S. only): 1-800-530-9960 3-9D-620616-0-20 Rev A CONFIDENTIALFusion Wideband Main Hub Rear PanelTable 3-3 lists the function of each pin on the 9-pin D-sub connector.This interface can both generate two source contact alarms (Fault and Warning) and sense 3 single external alarm contacts (Alarm Sense Input 1 through 3).3.3.1.2 N-type Female ConnectorsThere are two 50 Ohm N-type connector pairs for each of the 2 bands on the rear panel of the Hub:• The DOWNLINK connector receives downlink RF signals from a repeater, local base station, or MetroReach Focus system.• The UPLINK connector transmits uplink RF signals to a repeater, local base sta-tion, or MetroReach Focus system.CAUTION:The UPLINK and DOWNLINK ports cannot handle a DC power feed from the local base station. If DC power is present, a DC block must be used or the Fusion Wideband hub may be damaged.Table 3-3 9-pin D-sub Pin Connector FunctionsPin Function1 Alarm Sense Input (DC Ground)2 Alarm Sense Input 33 Alarm Sense Input 24 Warning Source Contact (positive connection)5 Warning Source Contact (negative connection)6 DC Ground (common)7 Fault Source Contact (positive connection)8 Alarm Sense Input 19 Fault Source Contact (negative connection)
Main Hub Specifications3-10 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A3.4 Main Hub SpecificationsTable 3-4 Main Hub SpecificationsSpecification DescriptionEnclosure Dimensions (H × W × D)a: a. Excluding angle brackets for the 19” rack mounting of the Hub.89 mm x 438 mm x 381 mm (3.5 in. x 17.25 in. x 15 in.) 2UWeight <5.5 kg (<12 lb)Operating Temperature 0° to +45°C (+32° to +113°F)Non-operating Temperature –20° to +85°C (–4° to +185°F)Operating Humidity, non-condensing 5% to 95%External Alarm Connector (contact closure) 1 9-pin D-sub, femaleMaximum: 40 mA @ 40V DCTypical: 4 mA @ 12V DCADMIN/LAN Interface Connector 1 RJ-45, female1 9-pin D-sub, male for optional modemFiber Connectors 4 Pair, SC/APCbb. It is critical to system performance that only SC/APC fiber connectors are used throughout the fiber network, including fiber distribution panels.NOTE: The Fusion Wideband One Port Main Hub (PN: FSN-W1-MH-1P) configuration is a cost reduced ver-sion of the Fusion Wideband Main Hub and supports only one Expansion Hub (up to 8 RAUs).RF Connectors 4 N, female (50 Ohm), 1 Downlink/Uplink pair per bandLED Fault and Status Indicators Unit Status (1 pair):•Power• Main Hub StatusDownstream Unit/Link Status (1 per fiber port):• Link/E-Hub/RAUAC Power Rating 100/240V AC, 1A, 50-60 HzOperating Range: 90-132V AC/170-250V AC auto-rangingPower Consumption (W) 30MTBF 117,972 hours
Help Hot Line (U.S. only): 1-800-530-9960 3-11D-620616-0-20 Rev A CONFIDENTIALFaults, Warnings, and Status Messages3.5 Faults, Warnings, and Status Messages3.5.1 DescriptionThe Fusion Wideband Main Hub monitors and reports changes or events in system performance to:• Ensure that fiber receivers, amplifiers and IF/RF paths are functioning properly.• Ensure that Expansion Hubs and Remote Access Units are connected and function-ing properly.An event is classified as fault, warning, or status message.• Faults are service impacting.• Warnings indicate a possible service impact.• Status and informational messages are generally not service impacting.The Fusion Wideband Main Hub periodically queries attached Expansion Hub and Remote Access Units for their status. Both faults and warnings are reported to a con-nected PC/laptop running a standard browser communicating with the Admin-Browser software. Only faults are indicated by the faceplate LEDs.For more information regarding the events, refer to:• Appendix C for Main Hub faults.• Appendix C for Main Hub warnings.• Appendix C for Main Hub status messages.• Section 9 for troubleshooting Main Hub LEDs.
Faults, Warnings, and Status Messages3-12 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A3.5.2 View PreferenceAdminBrowser 1.0 or higher enables you to select (using the screen shown in Figure 3-5) the type of events to be displayed.Figure 3-5 Preferences Check BoxesTo modify the setting, using AdminBrowser, select Alarms J Set Alarm Preference and select the desired choice. After you click OK, AdminBrowser refreshes and updates the tree view according to the new setting. NOTE: The setting is strictly visual and only in AdminBrowser. There is no affect on the hardware itself. By default, the event filtering is set to “Enable viewing of Faults only”.The only exception to when the event filtering is ignored is during the Install/Config-ure command. All events are displayed regardless of the event filtering setting. This ensures a smooth installation.
InterReach Fusion Wideband Installation, Operation, and Reference Manual 4-1D-620616-0-20 Rev A CONFIDENTIALSECTION 4 Fusion Wideband Expansion HubThis section contains the following subsections:• Section 4.1 Expansion Hub Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . on 4-1• Section 4.2 Expansion Hub Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . on 4-3• Section 4.3 Expansion Hub Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . on 4-8• Section 4.4 Faults, Warnings, and Status Messages . . . . . . . . . . . . . . . . . on 4-9• Section 4.5 Expansion Hub Specifications . . . . . . . . . . . . . . . . . . . . . . . on 4-104.1 Expansion Hub OverviewThe Expansion Hub acts an interface between the Main Hub and the Remote Access Unit(s) by converting optical signals to electrical signals and vice versa, as shown in Figure 4-1. It also supplies control signals and DC power to operate the Remote Access Unit(s) as well as passing status information from the RAUs to the Main Hub.Figure 4-1 Expansion Hub in a Fusion Wideband SystemFusion Wideband Expansion HubFusion Wideband Main HubRAUDownlink Path: The Expansion Hub receives downlink (Band1 and 2) optical signals from the Main Hub using fiber optic cable. It converts the signals to electrical and sends them to up to eight Remote Access Units (RAUs) using CATV cables. The Expansion Hub also receives configuration information from the Main Hub using the fiber optic cable and relays it to the RAUs using CATV cable.Uplink Path: The Expansion Hub receives uplink (Band1 and 2) IF signals from up to eight RAUs using CATV cables. It converts the signals to optical and sends them to a Main Hub using fiber optic cable.The Expansion Hub also receives RAU status information using CATV cable and sends it and its own status information to the Main Hub using the fiber optic cable.Downlink to Expansion HubUplink from Expansion HubDownlink from Expansion HubUplink to Expansion Hub
Expansion Hub Overview4-2 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AFigure 4-2 Expansion Hub Block Diagram
Help Hot Line (U.S. only): 1-800-530-9960 4-3D-620616-0-20 Rev A CONFIDENTIALExpansion Hub Front Panel4.2 Expansion Hub Front PanelFigure 4-3 Expansion Hub Front Panel1. One port LED per type F connector port for link status and downstream RAU sta-tus (8 pair total).2. Eight CATV cable, type F connectors (labeled PORT 1, 2, 3, 4, 5, 6, 7, 8)3. One pair of unit status LEDs• One LED for unit power status (labeled POWER)• One LED for unit status (labeled E-HUB STATUS)4. One set of fiber connection status LEDs• One LED for fiber downlink status (labeled DL STATUS)• One LED for fiber uplink status (labeled UL STATUS)5. One fiber optic port which has two connectors• One standard female SC/APC connector for MMF/SMF output (labeled UPLINK)• One standard female SC/APC connector for MMF/SMF input (labeled DOWNLINK)6. One 9-pin D-sub male connector for LGC factory testing (labeled CONSOLE)7. One RJ-45 female connector for system communication and diagnostics using a PC/laptop with direct connect or using a LAN switch (labeled ADMIN/LAN)8. Power Switch1 2 3 4 5867
Expansion Hub Front Panel4-4 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A4.2.1 75 Ohm Type F ConnectorsThe eight type F connectors on the Expansion Hub are for the CATV cables used to transmit and receive signals to and from RAUs. Use only 75 ohm type F connectors on the CATV cable.The CATV cable also delivers DC electrical power to the RAUs. The Expansion Hub’s DC voltage output is 54V DC nominal. A current limiting circuit protects the Hub if any port draws excessive power.NOTE: For system performance, it is important to use only low loss solid cop-per center conductor CATV cable with quality type F connectors that use captive centerpin connectors. Refer to Appendix A for approved cables and connectors.4.2.2 Manufacturing RS-232 Serial ConnectorConsole PortThis console port is only used by LGC Wireless manufacturing test purposes. DO NOT CONNECT ANYTHING TO IT.Local MonitoringUse a crossover Ethernet cable (PN-4069-ADB) to directly connect a laptop or PC to the RJ-45 female connector for local monitoring or configuring the Expansion Hub and associated RAUs using the AdminBrowser-EH resident software. The cable typi-cally has a RJ-45 male connector on both ends. Refer to Appendix A.5 on page A-8 for the cable pinout and the AdminBrowser manual.4.2.3 Optical Fiber Uplink/Downlink ConnectorsThe optical fiber uplink/downlink port transmits and receives optical signals between the Expansion Hub and the Main Hub using industry-standard SMF or MMF cable. The fiber port has two female SC/APC connectors:• Optical Fiber Uplink ConnectorThis connector (labeled UPLINK) is used to transmit (output) uplink optical signals to the Main Hub.• Optical Fiber Downlink ConnectorThis connector (labeled DOWNLINK) is used to receive (input) downlink optical sig-nals from the Main Hub.CAUTION: To avoid damaging the Expansion Hub’s fiber connector ports, use only SC/APC fiber cable connectors. Additionally, use only
Help Hot Line (U.S. only): 1-800-530-9960 4-5D-620616-0-20 Rev A CONFIDENTIALExpansion Hub Front PanelSC/APC fiber connectors throughout the fiber network, including fiber distribu-tion panels. This is critical for ensuring system performance.4.2.4 LED IndicatorsThe unit’s front panel LEDs indicate fault conditions and commanded or fault lockouts. The LEDs do not indicate warnings or whether the system test has been performed. Only use the LEDs to provide basic information or as a backup when you are not using AdminBrowser.Upon power up, the Expansion Hub goes through a five-second test to check the LED lamps. During this time, the LEDs blink through the states shown in Table 4-2, letting you visually verify that the LED lamps and the firmware are functioning properly.NOTE: Refer to Section 9 for troubleshooting using the LEDs.Unit Status and DL/UL Status LEDsThe Expansion Hub unit status and DL/UL status LEDs can be in one of the states shown in Table 4-1. These LEDs can be:steady greensteady redoff Table 4-1 Expansion Hub Unit Status and DL/UL Status LED States LED State IndicatesGreen / GreenGreen / Green• The Expansion Hub is connected to power and all power supplies are operating.• The Expansion Hub is not reporting a fault or lockout condition; but the system test may need to be performed or a warning condition could exist (use AdminManager to determine this).• Optical power received is above minimum (the Main Hub is con-nected) although the cable optical loss may be greater than recom-mended maximum.• Optical power transmitted (uplink laser) is normal and communica-tions with the Main Hub are normal.Green / GreenRed / Green• Optical power received is above minimum (the Main Hub is con-nected) although the cable optical loss may be greater than recom-mended maximum.• Optical power transmitted (uplink laser) is normal and communica-tions with the Main Hub are normal.• The Expansion Hub is reporting a fault.POWEREH STATUS DL STATUSUL STATUSPOWEREH STATUS DL STATUSUL STATUS
Expansion Hub Front Panel4-6 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AGreen / GreenGreen / Green (60-ppm)• Optical power received is above minimum (the Main Hub is con-nected) although the cable optical loss may be greater than recom-mended maximum.• Optical power transmitted (uplink laser) is normal and communica-tions with the Main Hub are normal.• The Expansion Hub is reporting a commanded lockout.Green / RedRed / Green• A fault condition was detected, optical power received is below mini-mum. (the Main Hub is not connected, is not powered, or the Main Hub’s downlink laser has failed, or the downlink fiber is disconnected or damaged.)Green / GreenRed / Red• The Expansion Hub is reporting a fault condition.• Optical power received is above minimum (Main Hub is connected) although the cable optical loss may be greater than recommended maximum.• Optical power transmitted is below minimum (Expansion Hub uplink laser has failed; unable to communicate with Main Hub). UL STATUS LED state must be checked within the first 90 seconds after power on. If initially green, then red after 90 seconds, it means that there is no communication with the Main Hub. If red on power up, replace the Expansion Hub.Green / RedRed / Red• Optical power received is below minimum (the Main Hub is not con-nected, is not powered, or the Main Hub’s downlink laser has failed, or the downlink fiber is disconnected or damaged.)• Optical power transmitted is below minimum (the Expansion Hub uplink laser has failed; is unable to communicate with the Main Hub). UL STATUS LED state must be checked within the first 90 seconds after power on. If initially green, then red after 90 seconds, it means that there is no communication with the Main Hub. If red on power up, the uplink laser has failed, replace the Expansion Hub.Green /OffGreen / Off• Expansion Hub is in factory test mode, return it to the factory.Red/ Don’t CareRed/ Don’t Care• One or more power supplies are out of specification. The hub needs to be replaced.Green/ RedOff/ Off• Expansion Hub failure. The Hub must be replaced.Table 4-1 Expansion Hub Unit Status and DL/UL Status LED States (continued)LED State IndicatesPOWEREH STATUS DL STATUSUL STATUSPOWEREH STATUS DL STATUSUL STATUSPOWEREH STATUS DL STATUSUL STATUSPOWEREH STATUS DL STATUSUL STATUSPOWEREH STATUS DL STATUSUL STATUSPOWEREH STATUS DL STATUSUL STATUSPOWEREH STATUS DL STATUSUL STATUS
Help Hot Line (U.S. only): 1-800-530-9960 4-7D-620616-0-20 Rev A CONFIDENTIALExpansion Hub Front PanelRJ-45 Port LEDsThe Expansion Hub has a port LED, labeled PORT, for each of the eight 75 Ohm, Type F ports. The port LEDs can be in one of the states shown in Table 4-2. These LEDs can be:offsteady greensteady redflashing red (60 pulses per minute [PPM])Table 4-2 Fusion Wideband Expansion Hub Port LED StatesLED State IndicatesOff • The RAU is not connected.Green • The RAU is connected.• No faults from the RAU.Red (60 PPM) • The RAU was disconnected.• The RAU is not communicating.• The RAU port power is tripped.Red (Steady) • The RAU is disconnected.• The RAU is reporting a fault.Green (60-ppm) • The RAU is disconnected.• The RAU is reporting a lockout condition.PORTPORTPORTPORTPORT
Expansion Hub Rear Panel4-8 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A4.3 Expansion Hub Rear PanelFigure 4-4 Expansion Hub Rear Panel1. AC power cord connector2. Two air exhaust vents3. One 9-pin D-sub female connector for contact alarm monitoring (labeled ALARMS)4. Ground lug for connecting unit to frame ground (labeled GROUND)Table 4-3 9-pin D-sub Pin Connector FunctionsThis interface can monitor three single external alarm contacts (Alarm Sense Input 1 This interface monitors the output contact closures from a Universal Power Supply (UPS). Verify the output contact closure state (normally closed or normally open) of the UPS, and set the appropriate contact definition using AdminBrowser.• Faults are service impacting.Pin Function1 Alarm Sense Input (DC Ground)2 Alarm Sense Input 33 Alarm Sense Input 24N/C5N/C6 DC Ground (common)7N/C8 Alarm Sense Input 19N/C1234
Help Hot Line (U.S. only): 1-800-530-9960 4-9D-620616-0-20 Rev A CONFIDENTIALFaults, Warnings, and Status Messages• Warnings indicate a possible service impact.• Status messages are generally not service impacting.4.4 Faults, Warnings, and Status MessagesBoth fault and warning conditions of the Expansion Hub and attached RAUs are reported to the Main Hub. Only faults are indicated by LEDs.For more information, refer to Appendix C, “Faults, Warnings, Status Tables,” on page C-1.NOTE: You can select what type of events AdminBrowser displays. Refer to Section 3.5.2 View Preference on 3-12.
Expansion Hub Specifications4-10 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A4.5 Expansion Hub SpecificationsTable 4-4 Expansion Hub SpecificationsSpecification DescriptionEnclosure Dimensions (H × W × D) 89 mm x 438 mm x 381 mm (3.5 in. x 17.25 in. x 15 in.) 2UWeight < 6.6 kg (< 14.5 lb.)Operating Temperature 0° to +45°C (+32° to +113°F)Non-operating Temperature –20° to +85°C (–4° to +185°F)Operating Humidity, non-condensing 5% to 95%CATV Connectorsaa. It is important that you use only recommended CATV 75 Ohm cable with quality F connectors.8 F, female (CATV - 75 Ohm)Fiber Connectorsbb. It is critical to system performance that only SC/APC fiber connectors are used throughout the fiber network, including fiber distribution panels.1 Pair, SC/APCLED Alarm and Status Indicators Unit Status (1 pair):•Power• E-Hub StatusFiber Link Status (1 pair):•DL Status•UL StatusPort Status (1 pair per CATV port):• Link/RAUExternal Alarm Connector (contact sense monitor) 1 9-pin D-sub, femaleAC Power (Volts) (47–63 Hz) Rating: 100/240V AC, 6A, 50-60 HzOperating Range: 90-132V AC/170-250V AC auto-rangingPower Consumption (W) 4 RAUs: 305 typical8 RAUs: 530 typicalMTBF 54,477 hours
InterReach Fusion Wideband Installation, Operation, and Reference Manual 5-1D-620616-0-20 Rev A CONFIDENTIALSECTION 5 Remote Access UnitThis section contains the following subsections:• Section 5.1 RAU Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1• Section 5.2 Remote Access Unit Connectors . . . . . . . . . . . . . . . . . . . . . . . . . 5-5• Section 5.3 RAU LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5• Section 5.4 Faults and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6• Section 5.5 Remote Access Unit Specifications . . . . . . . . . . . . . . . . . . . . . . . 5-75.1 RAU OverviewThe Remote Access Unit (RAU) is an active transceiver that connects to an Expan-sion Hub using industry-standard CATV cable, which delivers RF signals, configura-tion information, and electrical power to the RAU.An RAU passes converted 1F to RF (Downlink) and converted RF to 1F (Uplink) sig-nals between an Expansion Hub and an attached passive antenna where the signals are transmitted to wireless devices as shown in Figure 5-1.
RAU Overview5-2 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AFigure 5-1 Remote Access Unit in a Fusion Wideband SystemFigure 5-2 Remote Access Unit Block Diagram (Multiband)Fusion Wideband Expansion Hub RAUDownlink Path: The RAU receives downlink IF signals from a Fusion Wideband Hub using 75 Ohm CATV cable. It con-verts the signals to RF and sends them to a passive RF antenna using 50 Ohm coaxial cable. Also, the RAU receives con-figuration information from the Fusion Wideband Hub using the 75 Ohm CATV cable.Uplink Path: The RAU receives uplink RF signals from a passive RF antenna using 50 Ohm coaxial cable. It converts the signals to IF and sends them to a Fusion Wideband Hub using 75 Ohm CATV cable. Also, the RAU sends its status infor-mation to the Fusion Wideband Hub using CATV cable.The RAU receives 54VDC power from the Fusion Wideband Hub port through the 75 Ohm CATV cable center pin.Downlink to RAUUplink from RAUFusion Wideband Main HubDownlink to antennaUplink from antenna
Help Hot Line (U.S. only): 1-800-530-9960 5-3D-620616-0-20 Rev A CONFIDENTIALRAU OverviewThe Fusion Wideband RAUs are manufactured to a specific set of bands: one 60 MHz Band 1 and one 60 MHz Band 2. Table 5-1 lists the Fusion Wideband RAUs, the Fusion Wideband Band, and the frequency bands they cover. Table 5-1 Frequency Bands Covered by Fusion Wideband RAUsFusion Wideband RAU Part NumberFusion WidebandBandRF PassbandDownlink (MHz) Uplink (MHz)MAIN HUB/RAU Band RAU Bandwidth2500/2500 FSN-2500-1-WMAX 2500 2496–2690 2694–2690 1 60 MHz2500 2496–2690 2694–2690 2 60 MHz
RAU Overview5-4 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A* Exceeding the distance of copper-clad cable will result in the attached RAU becoming non-functional. If the distance of a cable run is at its maximum and is of concern, LGC recom-mends the use of solid copper cable to ensure successful operation.Table 5-2 System Gain (Loss) Relative to CATV Cable Length Cable TypeComm-Scope Part Number Plenum RatedSolid Copper ConductorCopper Clad ConductorZero-loss RF Maximum Length (meters)DistanceRF is 10dB Below Input RF (meters)RG-592065V Yes X 130 1802022V Yes X 100 100*5572R No X 95 95*5565 No X 130 180RG-62279V Yes X 140 1902275V Yes X 140 150*5726 No X 140 140*5765 No X 140 190RG-112293K Yes X 235 3202285K Yes X 235 300*5913 No X 235 300*
Help Hot Line (U.S. only): 1-800-530-9960 5-5D-620616-0-20 Rev A CONFIDENTIALRemote Access Unit Connectors5.2 Remote Access Unit Connectors5.2.1 50 Ohm Type-N ConnectorThe RAU has one female type-N connector. The connector is a duplexed RF input/output port that connects to a standard 50Ω passive antenna using coaxial cable.5.2.2 75 Ohm Type-F ConnectorThe RAU has one type-F female connector that connects it to a Fusion Wideband Hub using CATV 75 Ohm cable. Use RG-59, 6, or 11 solid copper center conductor cables.NOTE: For system performance, it is important that you use only low loss, solid copper center conductor CATV cable with quality F connectors that use captive centerpin conductors. Refer to Appendix A for specific information.5.3 RAU LED IndicatorsUpon power up, the RAU goes through a two-second test to check the LED lamps. During this time, the LEDs blink green/green red/red, letting you visually verify that the LED lamps and the firmware are functioning properly.NOTE: Refer to Section 9 for troubleshooting using the LEDs.Status LEDsThe RAU status LEDs can be in one of the states shown in Table 5-3. These LEDs can be:offsteady greensteady redThere is no off state when the unit’s power is on.
Faults and Warnings5-6 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A5.4 Faults and WarningsBoth fault and warning conditions are reported to the Fusion Wideband Hub where they are stored. Only faults are indicated by the faceplate LEDs.For more information, refer to Appendix C.Table 5-3 Remote Access Unit LED StatesLED State IndicatesOffOff • The RAU is not receiving DC power.GreenGreen • The RAU is powered and is not indicating a fault condition. Communication with the Fusion Wideband Hub is normal; however, the system test may need to be performed or a warning con-dition may exist (use AdminBrowser to deter-mine this).GreenRed • The RAU is indicating a fault or lockout condi-tion, but communication with the Fusion Wide-band Hub is normal.RedRed • The RAU is reporting a fault and is not able to communicate with the Fusion Wideband HubGreen (60-ppm)Green (60-ppm) • The RAU is reporting a lockout condition, but communication with the Fusion Wideband Hub is normal.LINKALARMLINKALARMLINKALARMLINKALARMLINKALARM
Help Hot Line (U.S. only): 1-800-530-9960 5-7D-620616-0-20 Rev A CONFIDENTIALRemote Access Unit Specifications5.5 Remote Access Unit SpecificationsNOTE: For system performance, it is important that you use only low loss, solid copper center conductor CATV cable with quality F connectors that use captive centerpin conductors. Refer to Appendix A for more information.Table 5-4 Remote Access Unit SpecificationsSpecification DescriptionDimensions (H × W × D) 54 mm × 286 mm × 281 mm(2.13 in. × 11.25 in. × 11.13 in.)Weight < 2.1 kg (< 4.6 lb.)Operating Temperature –25° to +45°C (–13° to +113°F)Non-operating Temperature –25° to +85°C (–13° to +185°F)Operating Humidity, non-condensing 5% to 95%RF Connectors One Type-F, female (CATV - 75 ohms)One Type-N, female (coaxial 50 ohms) LED Alarm and Status Indicators Unit Status (1 pair):• Link• AlarmMaximum Heat Dissipation (W) 50 typical, 64 max (from the Hub)MTBF 211,600 hours
Remote Access Unit Specifications5-8 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A
InterReach Fusion Wideband Installation, Operation, and Reference Manual 6-1D-620616-0-20 Rev A CONFIDENTIALSECTION 6 Designing a Fusion Wideband SolutionThis section contains the following subsections:• Section 6.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1• Section 6.2 Downlink RSSI Design Goal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3• Section 6.3 Maximum Output Power per Carrier . . . . . . . . . . . . . . . . . . . . . . 6-4• Section 6.4 System Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6• Section 6.5 Estimating RF Coverage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8• Section 6.6 Link Budget Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14• Section 6.7 Optical Power Budget . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-26• Section 6.8 Connecting a Main Hub to a Base Station . . . . . . . . . . . . . . . . . 6-276.1 OverviewDesigning a Fusion Wideband solution is a matter of determining coverage and capacity needs. This requires the following steps:1. Determine the wireless service provider’s requirements: Refer to Section 6.2, “Downlink RSSI Design Goal,” on page 6-3.The following information is typically provided by the service provider:• Frequency (for example, 1900 MHz)• Band (for example, “A-F” band in the PCS spectrum)• Protocol (for example, CDMA, GSM, 1xRTT, GPRS, and so on)• Number of sectors and peak capacity per sector (translates to the number of RF carriers that the system will have to transmit)• Downlink RSSI design goal (RSSI, received signal strength at the wireless handset, for example, –85 dBm)
Overview6-2 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AThe design goal is always a stronger signal than the mobile phone needs. It includes inherent factors which affect performance.• RF source (base station or bidirectional amplifier or repeater), type of equip-ment if possible.2. Determine the downlink power per carrier from the RF source through the DAS: Refer to Section 6.3, “Maximum Output Power per Carrier,” on page 6-4.The maximum power per carrier is a function of modulation type, the number of RF carriers, signal quality issues, regulatory emissions requirements, and Fusion Wideband’s RF performance. Power per carrier decreases as the number of carri-ers increases. 3. Develop an RF link budget: Refer to Section 6.5, “Estimating RF Coverage,” on page 6-8.Knowing both the power per carrier and RSSI design goal, you can develop an RF downlink link budget which estimates the allowable path loss from an RAU’s antenna to the wireless handset.allowable path loss = power per carrier + antenna gain – design goalSatisfactory performance can be expected as long as path loss is below this level.4. Determine the in-building environment: Refer to Section 6.5, “Estimating RF Coverage,” on page 6-8.• Determine which areas of the building require coverage (entire building, public areas, parking levels, and so on.)• Obtain floor plans to determine floor space of building and the wall layout of the proposed areas to be covered. Floor plans are also useful when you are selecting antenna locations.• If possible, determine the building’s construction materials (sheetrock, metal, concrete, and so on.)• Determine the type of environment:– Open layout (for example, a convention center)– Dense, close walls (for example, a hospital)– Mixed use (for example, an office building with hard wall offices and cubi-cles)5. Determine the appropriate estimated path loss slope that corresponds to the type of building and its layout, and estimate the coverage distance for each RAU: Refer to Section 6.5, “Estimating RF Coverage,” on page 6-8.Use the path loss slope (PLS), which gives a value to the RF propagation charac-teristics within the building, to convert the RF link budget into an estimate of the coverage distance per antenna. This helps establish the quantities of Fusion Wide-band equipment you need. The actual path loss slope that corresponds to the spe-cific RF environment inside the building can also be determined empirically by performing an RF site-survey of the building. This involves transmitting a cali-
Help Hot Line (U.S. only): 1-800-530-9960 6-3D-620616-0-20 Rev A CONFIDENTIALDownlink RSSI Design Goalbrated tone for a fixed antenna and making measurements with a mobile antenna throughout the area surrounding the transmitter.6. Determine the items required to connect to the base station: Refer to Section 6.8, “Connecting a Main Hub to a Base Station,” on page 6-27.Once you know the quantities of Fusion Wideband equipment to be used, you can determine the accessories (combiners/dividers, surge suppressors, repeaters, attenuators, circulators, and so on.) required to connect the system to the base sta-tion.The individual elements that must be considered in designing a Fusion Wideband solution are explained in the following sections.NOTE: Access the LGC Wireless Customer Portal at LGCWireless.com for on-line dimensioning and design tools.6.2 Downlink RSSI Design GoalWireless service providers typically provide a minimum downlink signal level and an associated confidence factor when specifying coverage requirements. These two fig-ures of merit are a function of wireless handset sensitivity and margins for fading and body loss. Wireless handset sensitivity is the weakest signal that the handset can pro-cess reliably and is a combination of the thermal noise in the channel, noise figure of the handset receiver front end and minimum required SNR. Fade margins for multi-path fading (fast or small-scale) and log-normal shadow fading (slow or large-scale) are determined by the desired confidence factor, and other factors. Downlink RSSI design goal calculations for the GSM protocol are shown below for a 95% area cover-age confidence factor.Noise Power10 Log (KT)+10 Log (200 KHz); K=1.38X10–23, T=300 degrees Kelvin–121 dBmWireless Handset Noise Figure 8 dBRequired SNR 9 dBMultipath Fade Margin95% Reliability for Rician K=6 dB6dBLog-normal Fade Margin95% Area/87% Edge Reliability for 35 dB PLS and 9 dB Sigma10 dBBody Attenuation + 3 dBDownlink RSSI Design Goal (PDesignGoal)Signal level received by wireless handset at edge of coverage area–85 dBm
Maximum Output Power per Carrier6-4 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev ADownlink design goals on the order of –85 dBm are typical for protocols, such as GSM. Wireless service providers may choose a higher level to ensure that in-building signal dominates any macro signal that may be leaking into the building.6.3 Maximum Output Power per CarrierThe following tables show the recommended maximum power per carrier out of the RAU 50 Ohm Type-N connector for different frequencies, protocols, and numbers of carriers. These maximum levels are dictated by RF signal quality and regulatory emissions issues. In general, as the number of RF carrier increases, the maximum power per carrier decreases. If these levels are exceeded, signal quality will be degraded and/or regulator requirements will be violated. The maximum input power to the Hub is determined by subtracting the system gain from the maximum output power of the RAU. System gain is software selectable from 0 dB to 15 dB in 1 dB steps. Additionally, both the uplink and downlink gain of each RAU can be reduced by 10 dB in 1 dB steps.When connecting a Hub to a base station or repeater, attenuation on the downlink is typically required to avoid exceeding Fusion Wideband’s maximum output power recommendations.WARNING: Exceeding the maximum input power may cause perma-nent damage to the Hub. Do not exceed the maximum composite input power of 1W (+30 dBm) to the Hub at any time.NOTE: These specifications are for downlink power at the RAU output (excluding antenna).
Help Hot Line (U.S. only): 1-800-530-9960 6-5D-620616-0-20 Rev A CONFIDENTIALMaximum Output Power per Carrier6.3.1 2500 MHz WiMAXDesigning for Capacity GrowthFusion Wideband systems are deployed to enhance in-building coverage and/or to off-load capacity from a macro cell site. In many instances, subscriber usage increases with time and the wireless provider responds by increasing the load on the installed Fusion Wideband system. For example, the initial deployment might only require two RF carriers, but four RF carriers may be needed in the future based on capacity growth forecasts. There are two options for dealing with this scenario:1. Design the initial coverage with a maximum power per carrier for four RF carri-ers. This will likely result in additional RAUs.2. Design the initial coverage for two RF carriers, but reserve RAU ports on the Hub for future use. These ports can be used to fill potential coverage holes once the power per carrier is lowered to accommodate the two additional carriers.Table 6-1 WiMAX Power per CarrierNo. ofCarriersPower per Carrier (dBm)WIMAX116.5Note: Operation at or above these output power levels may prevent Fusion Wideband from meeting RF performance specifications or FCC Part 15 and EN55022 emissions requirements.
System Gain6-6 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A6.4 System GainThe system gain of the Fusion Wideband defaults to 0 dB or can be set up to 15 dB in 1 dB increments. In addition, uplink and downlink gains of each RAU can be inde-pendently decreased by 10 dB in one dB steps using AdminBrowser. The recommended maximum lengths of CATV cable are as follows:• For RG-59 cable 130 meters for CommScope PN 2065V. • For RG-6 cable 140 meters for CommScope PN 2279V.• For RG-11 cable 235 meters for CommScope PN 2293K.If the maximum distance is not required, then copper-clad over steel center-conductor cable may be use to reduce cable costs.If the CATV cable is longer than the recommended distance per cable type, the gain of the system will decrease, as shown in Table 6-2.
Help Hot Line (U.S. only): 1-800-530-9960 6-7D-620616-0-20 Rev A CONFIDENTIALSystem Gain* Exceeding the distance of copper-clad cable will result in the attached RAU becoming non-functional. If the distance of a cable run is at its maximum and is of concern, LGC recommends the use of solid copper cable to ensure successful operation.Table 6-2 System Gain (Loss) Relative to CATV Cable Length Cable TypeComm-Scope Part Number Plenum RatedSolid Copper ConductorCopper Clad ConductorZero-loss RF Maximum Length (meters)Distance Where RF is 10dB Below Input RF (meters)RG-592065V Yes X 130 1802022V Yes X 100 100*5572R No X 95 95*5565 No X 130 180RG-62279V Yes X 140 1902275V Yes X 140 150*5726 No X 140 140*5765 No X 140 190RG-112293K Yes X 235 3202285K Yes X 235 300*5913 No X 235 300*
Estimating RF Coverage6-8 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A6.5 Estimating RF CoverageThe maximum output power per carrier (based on the number and type of RF carriers being transmitted) and the minimum acceptable received power at the wireless device (that is, the RSSI design goal) essentially establish the RF downlink budget and, con-sequently, the maximum allowable path loss (APL) between the RAU’s antenna and the wireless device. Since in-building systems, such as the Fusion Wideband, are gen-erally downlink-limited, this approach is applicable in the majority of deployments.Figure 6-1 Determining APL between the Antenna and the Wireless DeviceAPL = (P – Lcoax + G) – RSSI (1)where:• APL = the maximum allowable path loss in dB• P = the power per carrier transmitted by the RAU in dBm•Lcoax = the coaxial cable loss between the RAU and passive antenna in dB• G = the gain of the passive antenna in dBiCoaxial cable is used to connect the RAU to an antenna. Table 6-3 lists coaxial cable loss for various cable lengths.You can calculate the distance, d, corresponding to the maximum allowable path loss using equations introduced in the following sections.Table 6-3 Coaxial Cable Losses (Lcoax)Length of Cable(.195 in. diameter) Loss at 850 MHz (dB) Loss at1900 MHz (dB)0.9 m (3 ft) 0.6 0.81.8 m (6 ft) 1.0 1.53.0 m (10 ft) 1.5 2.3RAUP = power per Distance = dG = Antenna GainRSSI = power at thewireless devicecarrier from the RAULcoax = Coaxial cable loss
Help Hot Line (U.S. only): 1-800-530-9960 6-9D-620616-0-20 Rev A CONFIDENTIALEstimating RF Coverage6.5.1 Path Loss EquationIn-building path loss obeys the distance power law1 in equation (2):PL = 20log10(4πd0f/c) + 10nlog10(d/d0) + Χs(2)where:• PL is the path loss at a distance, d, from the antenna• d = the distance expressed in meters•d0 = free-space path loss distance in meters• f = the operating frequency in Hertz.• c = the speed of light in a vacuum (3.0 × 108 m/sec).•n = the path loss exponent and depends on the building “clutter” and frequency of operation•Χs = a normal random variable that depends on partition material and geome-tries inside the building and is accounted for by the log-normal fade margin used in the downlink RSSI design goal calculationAs a reference, Table 6-4 provides estimates of signal loss for some RF barriers1.1. Rappaport, Theodore S. Wireless Communications, Principles, and Practice. Prentice Hall PTR, 1996.Table 6-4 Average Signal Loss of Common Building MaterialsPartition Type Loss (dB) Frequency (MHz)Metal wall 26 815Aluminum siding 20 815Foil insulation 4 815Cubicle walls 1.4 900Concrete block wall 13 1300Concrete floor 10 1300Sheetrock 1 to 2 1300Light machinery 3 1300General machinery 7 1300Heavy machinery 11 1300Equipment racks 7 1300Assembly line 6 1300Ceiling duct 5 1300Metal stairs 5 1300
Estimating RF Coverage6-10 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A6.5.2 RAU Coverage DistanceUse equations (1) and (2), on pages 6-8 and 6-9, respectively, to estimate the distance from the antenna to where the RF signal decreases to the minimum acceptable level at the wireless device.With d0 set to one meter and path loss slope (PLS) defined as 10n, Equation (2) can be simplified to:PL(d) = 20log10(4πf/c) + PLS·log10(d) (3)Table 6-5 gives the value of the first term of Equation (3) (that is., (20log10(4πf/c)) for various frequency bands.Table 6-6 shows estimated PLS for various environments that have different “clutter” (that is, objects that attenuate the RF signals, such as walls, partitions, stairwells, equipment racks, and so.).By setting the path loss to the maximum allowable level (PL = APL), equation (3) canTable 6-5 Frequency Bands and the Value of the First Term in Equation (3)FrequencyBand (MHz) Mid-Band Frequency (MHz) 20log10(4πf/c)Uplink Downlink1800 MHz DCS 1710-1785 1805-1880 1795 37.52.1 GHz UMTS 1920–1980 2110–2170 2045 38.7Table 6-6 Estimated Path Loss Slope for Different In-Building EnvironmentsEnvironment Type Example PLS for 850/900 MHz PLS for 1800/1900 MHzOpen Environmentvery few RF obstructions Parking Garage, Conven-tion Center 33.7 30.1Moderately Open Environmentlow-to-medium amount of RF obstructionsWarehouse, Airport, Man-ufacturing 35 32Mildly Dense Environmentmedium-to-high amount of RF obstructionsRetail, Office Space with approximately 80% cubi-cles and 20% hard walled offices36.1 33.1Moderately Dense Environmentmedium-to-high amount of RF obstructionsOffice Space with approx-imately 50% cubicles and 50% hard walled offices37.6 34.8Dense Environmentlarge amount of RF obstructions Hospital, Office Space with approximately 20% cubicles and 80% hard walled offices39.4 38.1
Help Hot Line (U.S. only): 1-800-530-9960 6-11D-620616-0-20 Rev A CONFIDENTIALEstimating RF Coveragebe used to estimate the maximum coverage distance of an antenna connected to anRAU, for a given frequency and type of in-building environment.d = 10^((APL - 20log10(4πf/c))/PLS) (4)For reference, Tables 6-7 through 6-8 show the distance covered by an antenna for various in-building environments. The following assumptions were made:• Path loss Equation (4)• 6 dBm output per carrier at the RAU output• 3 dBi antenna gain• RSSI design goal = –85 dBm (typical for narrowband protocols, but not for spread-spectrum protocols)Table 6-7 Approximate Radiated Distance from Antenna for 1800 MHz DCS ApplicationsFacilityDistance from AntennaMeters FeetOpen Environment 75 246Moderately Open Environment 58 191Mildly Dense Environment 50 166Moderately Dense Environment 42 137Dense Environment 30 100Table 6-8 Approximate Radiated Distance from Antenna for 2.1 GHz UMTS ApplicationsFacilityDistance from AntennaMeters FeetOpen Environment 69 226Moderately Open Environment 54 176Mildly Dense Environment 47 154Moderately Dense Environment 39 128Dense Environment 28 93
Estimating RF Coverage6-12 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A6.5.3 Examples of Design EstimatesExample Design Estimate for an 1900 MHz CDMA Application1. Design goals:• PCS (1920 MHz = average of the lowest uplink and the highest downlink fre-quency in 1900 MHz PCS band)• CDMA provider• 8 CDMA carriers in the system• –85 dBm design goal (to 95% of the building) — the minimum received power at the wireless device• Base station with simplex RF connections2. Power Per Carrier: The tables in Section 6.3, “Maximum Output Power per Car-rier,” on page 6-4 provide maximum power per carrier information. The 1900 MHz CDMA table indicates that Fusion Wideband can support eight carriers with a recommended maximum power per carrier of 6.5 dBm. The input power should be set to the desired output power minus the system gain.3. Building information:• 16 floor building with 9,290 sq. meters (100,000 sq. ft.) per floor; total 148,640 sq. meters (1,600,000 sq. ft.).• Walls are sheetrock construction, suspended ceiling tiles.• Antennas used are omni-directional, ceiling mounted.• Standard office environment, 80% hard wall offices and 20% cubicles.4. Link Budget: In this example, a design goal of –85 dBm is used. Suppose 3 dBi omni-directional antennas are used in the design. Then, the maximum RF propa-gation loss should be no more than 94.5 dB (6.5 dBm + 3 dBi + 85 dBm) over 95% of the area being covered. It is important to note that a design goal such as –85 dBm is usually derived taking into account multipath fading and log-normal shadowing characteristics. Thus, this design goal will only be met “on average” over 95% of the area being covered. At any given point, a fade may bring the sig-nal level underneath the design goal.Note that this method of calculating a link budget is only for the downlink path. For information to calculate link budgets for both the downlink and uplink paths, refer to Section 6.6 on page 6-14.5. Path Loss Slope: For a rough estimate, Table 6-6, “Estimated Path Loss Slope for Different In-Building Environments” on page 6-10, shows that a building with 80% hard wall offices and 20% cubicles, at 1920 MHz, has an approximate path loss slope (PLS) of 38.1. Given the RF link budget of 94.5 dB, the distance of coverage from each RAU will be 30.2 meters (99 ft). This corresponds to a coverage area of 2,868 sq. meters (30,854 sq. ft.) per RAU (refer to Section 6.5.1 for details on path loss estimation). For this case we assumed a circular radiation pattern, though the actual area covered depends upon the pattern of the antenna and the obstructions in the facility.
Help Hot Line (U.S. only): 1-800-530-9960 6-13D-620616-0-20 Rev A CONFIDENTIALEstimating RF Coverage6. Equipment Required: Since you know the building size, you can now estimate the Fusion Wideband equipment quantities needed. Before you test any RF levels in the building, you can estimate that four antennas per level will be needed. This assumes no propagation between floors. If there is propagation, you may not need antennas on every floor.a. 4 antennas per floor × 16 floors = 64 RAUsb. 64 RAUs ÷ 8 (maximum 8 RAUs per Expansion Hub) = 8 Expansion Hubsc. 8 Expansion Hubs ÷ 4 (maximum 4 Expansion Hubs per Main Hub) = 2 Main HubsCheck that the fiber and CATV cable distances are as recommended. If the dis-tances differ, use the tables in Section 6.4, “System Gain,” on page 6-6 to deter-mine system gains or losses. The path loss may need to be recalculated to assure adequate signal levels in the required coverage distance.The above estimates assume that all cable length requirements are met. If Expansion Hubs cannot be placed so that the RAUs are within the distance requirement, addi-tional Expansion Hubs may need to be placed closer to the required RAUs locations.An RF Site Survey and Building Evaluation is required to accurately establish the Fusion Wideband equipment quantities required for the building. The site survey measures the RF losses within the building to determine the actual PLS, used in the final path loss formula to determine the actual requirements of the Fusion Wideband system.
Link Budget Analysis6-14 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A6.6 Link Budget AnalysisA link budget is a methodical way to account for the gains and losses in an RF system so that the quality of coverage can be predicted. The end result can often be stated as a “design goal” in which the coverage is determined by the maximum distance from each RAU before the signal strength falls beneath that goal.One key feature of the link budget is the maximum power per carrier explained in Section 6.3. While the maximum power per carrier is important as far as emissions and signal quality requirements are concerned, it is critical that the maximum signal into the Main Hub never exceed 1W (+30 dBm). Composite power levels above this limit will cause damage to the Main Hub.WARNING: Exceeding the maximum input power of 1W (+30 dBm) could cause permanent damage to the Main Hub.NOTE: Visit the LGC Wireless customer portal at LGCWireless.com for the on-line Link Budget Tool.6.6.1 Elements of a Link Budget for Narrowband StandardsThe link budget represents a typical calculation that might be used to determine how much path loss can be afforded in a Fusion Wideband design. This link budget ana-lyzes both the downlink and uplink paths. For most configurations, the downlink requires lower path loss and is therefore the limiting factor in the system design. It is for this reason that a predetermined “design goal” for the downlink is sufficient to predict coverage distance.The link budget is organized in a simple manner: the transmitted power is calculated, the airlink losses due to fading and body loss are summed, and the receiver sensitivity (minimum level a signal can be received for acceptable call quality) is calculated. The maximum allowable path loss (in dB) is the difference between the transmitted power, less the airlink losses, and the receiver sensitivity. From the path loss, the maximum coverage distance can be estimated using the path loss formula presented in Section 6.5.1.Table 6-9 provides link budget considerations for narrowband systems.
Help Hot Line (U.S. only): 1-800-530-9960 6-15D-620616-0-20 Rev A CONFIDENTIALLink Budget AnalysisTable 6-9 Link Budget Considerations for Narrowband SystemsConsideration DescriptionBTS Transmit Power The power per carrier transmitted from the base station outputAttenuation between BTS and Fusion WidebandThis includes all losses: cable, attenuator, splitter/combiner, and so forth. On the downlink, attenuation must be chosen so that the maximum power per carrier going into the Main Hub does not exceed the levels given in Section 6.3. On the uplink, attenuation is chosen to keep the maximum uplink signal and noise level low enough to prevent base station alarms but small enough not to cause degradation in the system sensitivity.If the Fusion Wideband noise figure minus the attenuation is at least 10 dB higher than the BTS noise figure, the system noise figure is approximately that of Fusion Wideband alone. Refer to Sec-tion 6.8 for ways to independently set the uplink and downlink attenuations between the base station and Fusion Wideband.Antenna Gain The radiated output power includes antenna gain. For example, if you use a 3 dBi antenna at the RAU that is transmitting 0 dBm per carrier, the effective radiated power (relative to an isotropic radi-ator) is 3 dBm per carrier.BTS Noise Figure This is the effective noise floor of the base station input (usually base station sensitivity is this effec-tive noise floor plus a certain C/I ratio).Fusion Wideband Noise Figure This is Fusion Wideband’s uplink noise figure, which varies depending on the number of Expansion Hubs and RAUs, and the frequency band. Fusion Wideband’s uplink noise figure is specified for a 1-1-8 configuration. Thus, the noise figure for a Fusion Wideband system (or multiple systems whose uplink ports are power combined) is NF(1-1-8) + 10*log(# of Expansion Hubs). This repre-sents an upper-bound because the noise figure is lower if any of the Expansion Hub’s RAU ports are not used.Thermal Noise This is the noise level in the signal bandwidth (BW). Thermal noise power = –174 dBm/Hz + 10Log(BW).Required C/I ratio For each wireless standard, a certain C/I (carrier to interference) ratio is needed to obtain acceptable demodulation performance. For narrowband systems, (TDMA, GSM, EDGE, iDEN, AMPS) this level varies from about 9 dB to 20 dB.Mobile Transmit Power The maximum power the mobile can transmit (power transmitted at highest power level setting).Multipath Fade Margin This margin allows for a certain level of fading due to multipath interference. Inside buildings there is often one or more fairly strong signals and many weaker signals arriving from reflections and dif-fraction. Signals arriving from multiple paths add constructively or destructively. This margin accounts for the possibility of destructive multipath interference. In RF site surveys the effects of multipath fading are typically not accounted for because such fading is averaged out over power level samples taken over many locations.Protocol Signal Bandwidth Thermal NoiseTDMA 30 kHz –129 dBmGSM 200 kHz –121 dBmiDEN 25 kHz –130 dBm
Link Budget Analysis6-16 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev ALog-normal Fade Margin This margin adds an allowance for RF shadowing due to objects obstructing the direct path between the mobile equipment and the RAU. In RF site surveys, the effects of shadowing are partially accounted for since it is characterized by relatively slow changes in power level.Body Loss This accounts for RF attenuation caused by the user’s head and body.Minimum Received Signal Level This is also referred to as the “design goal”. The link budget says that you can achieve adequate cov-erage if the signal level is, on average, above this level over 95% of the area covered, for example.Table 6-9 Link Budget Considerations for Narrowband Systems (continued)Consideration Description
Help Hot Line (U.S. only): 1-800-530-9960 6-17D-620616-0-20 Rev A CONFIDENTIALLink Budget Analysis6.6.2 Narrowband Link Budget Analysis for a Microcell Application• c = a + b• f = c + d + e• j = g + h + i• n = k + l + m• k: in this example, k represents the thermal noise for a TDMA signal, which has a bandwidth of 30 kHz• p = f – j – nTable 6-10 Narrowband Link Budget Analysis: DownlinkLine DownlinkTransmittera. BTS transmit power per carrier (dBm) 33b. Attenuation between BTS and Fusion Wideband (dB) –23c. Power into Fusion Wideband (dBm) 10d. Fusion Wideband gain (dB) 0e. Antenna gain (dBi) 3f. Radiated power per carrier (dBm) 13Airlinkg. Multipath fade margin (dB) 6h. Log-normal fade margin with 9 dB std. deviation, 95% area coverage, 87% edge coverage 10i. Body loss (dB) 3j. Airlink losses (not including facility path loss) 19Receiverk. Thermal noise (dBm/30 kHz) –129l. Mobile noise figure (dB) 7m. Required C/I ratio (dB) 17n. Minimum received signal (dBm) –105p. Maximum path loss (dB) +99
Link Budget Analysis6-18 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A• e: enter the noise figure and gain of each system component (a, b, c, and d) into the standard cascaded noise figure formula• i = f + e + g – h• m = j + k + l• p = n – m – iTherefore, the system is downlink limited but the downlink and uplink are almost balanced, which is a desirable condition.Table 6-11 Narrowband Link Budget Analysis: UplinkLine UplinkReceivera. BTS noise figure (dB) 4b. Attenuation between BTS and Fusion Wideband (dB) –10c. Fusion Wideband gain (dB) 0d. Fusion Wideband noise figure (dB) 1-4-32 22e. System noise figure (dB) 22.6f. Thermal noise (dBm/30 kHz) –129g. Required C/I ratio (dB) 12h. Antenna gain (dBi) 3i. Receive sensitivity (dBm) –97.4Airlinkj. Multipath fade margin (dB) 6k. Log-normal fade margin with 9 dB std. deviation, 95% area coverage, 87% edge coverage 10l. Body loss (dB) 3m. Airlink losses (not including facility path loss) 19Transmittern. Mobile transmit power (dBm) 28p. Maximum path loss (dB) 106.4Fsys = F1 + + + ....F2 – 1G1F3 – 1G1G2whereF = 10(See Rappaport, Theodore S. Wireless Communications, Principles, and Practice. Prentice Hall PTR, 1996.)(Noise Figure/10)G = 10(Gain/10)
Help Hot Line (U.S. only): 1-800-530-9960 6-19D-620616-0-20 Rev A CONFIDENTIALLink Budget Analysis6.6.3 Elements of a Link Budget for CDMA StandardsA CDMA link budget is slightly more complicated because you must consider the spread spectrum nature of CDMA. Unlike narrowband standards such as TDMA and GSM, CDMA signals are spread over a relatively wide frequency band. Upon recep-tion, the CDMA signal is de-spread. In the de-spreading process the power in the received signal becomes concentrated into a narrow band, whereas the noise level remains unchanged. Hence, the signal-to-noise ratio of the de-spread signal is higher than that of the CDMA signal before de-spreading. This increase is called processing gain. For IS-95 and J-STD-008, the processing gain is 21 dB or 19 dB depending on the user data rate (9.6 Kbps for rate set 1 and 14.4 Kbps for rate set 2, respectively). Because of the processing gain, a CDMA signal (comprising one Walsh code channel within the composite CDMA signal) can be received at a lower level than that required for narrowband signals. A reasonable level is –95 dBm, which results in about –85 dBm composite as shown below.An important issue to keep in mind is that the downlink CDMA signal is composed of many orthogonal channels: pilot, paging, sync, and traffic. The composite power level is the sum of the powers from the individual channels. Table 6-12 shows an example.This table assumes that there are 15 active traffic channels operating with 50% voice activity (so that the total power adds up to 100%). Notice that the pilot and sync chan-nels together contribute about 25% of the power. When measuring the power in a CDMA signal you must be aware that if only the pilot and sync channels are active, the power level will be about 6 to 7 dB lower than the maximum power level you can expect when all voice channels are active. The implication is that if only the pilot and sync channels are active, and the maximum power per carrier table says that you should not exceed 10 dBm for a CDMA signal, for example, then you should set the attenuation between the base station and the Main Hub so that the Main Hub receives 3 dBm (assuming 0 dB system gain).An additional consideration for CDMA systems is that the uplink and downlink paths should be gain and noise balanced. This is required for proper operation of soft-hand-off to the outdoor network as well as preventing excess interference that is caused by mobiles on the indoor system transmitting at power levels that are not coordinated with the outdoor mobiles. This balance is achieved if the power level transmitted by the mobiles under close-loop power control is similar to the power level transmitted under open-loop power control. Table 6-12 Distribution of Power within a CDMA SignalChannel Walsh Code Number Relative Power LevelPilot 0 20% –7.0 dBSync 32 5% –13.3 dBPrimary Paging 1 19% –7.3 dBTraffic 8–31, 33–63 9% (per traffic channel) –10.3 dB
Link Budget Analysis6-20 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AThe open-loop power control equation isPTX + PRX = –73 dBm (for Cellular, IS-95)PTX + PRX = –76 dBm (for PCS, J-STD-008)where PTX is the mobile’s transmitted power and PRX is the power received by the mobile.The power level transmitted under closed-loop power control is adjusted by the base station to achieve a certain Eb/N0 (explained in Table 6-13 on page 6-20). The differ-ence between these power levels, ΔP, can be estimated by comparing the power radi-ated from the RAU, Pdownink, to the minimum received signal, Puplink, at the RAU:ΔP = Pdownink + Puplink + 73 dBm (for Cellular)ΔP = Pdownink + Puplink + 76 dBm (for PCS)It’s a good idea to keep –12 dB < ΔP < 12 dB.Table 6-13 provides link budget considerations for CDMA systems.Table 6-13 Additional Link Budget Considerations for CDMAConsideration DescriptionMultipath Fade Margin The multipath fade margin can be reduced (by at least 3 dB) by using different lengths of optical fiber (this is called “delay diversity”). The delay over fiber is approximately 5µS/km. If the difference in fiber lengths to Expansion Hubs with overlapping coverage areas produces at least 1 chip (0.8µS) delay of one path relative to the other, then the multipaths’ signals can be resolved and processed independently by the base station’s rake receiver. A CDMA signal traveling through 163 meters of MMF cable is delayed by approximately one chip. Power per car-rier, downlink This depends on how many channels are active. For example, the signal is about 7 dB lower if only the pilot, sync, and paging channels are active compared to a fully-loaded CDMA signal. Furthermore, in the CDMA forward link, voice channels are turned off when the user is not speaking. On average this is assumed to be about 50% of the time. So, in the spreadsheet, both the power per Walsh code channel (rep-resenting how much signal a mobile will receive on the Walsh code that it is de-spreading) and the total power are used.The channel power is needed to determine the maximum path loss, and the total power is needed to deter-mine how hard the Fusion Wideband system is being driven.The total power for a fully-loaded CDMA signal is given by (approximately):total power = voice channel power + 13 dB + 10log10 (50%)= voice channel power + 10 dBInformation Rate This is simply 10log10(9.6 Kbps) = 40 dB for rate set 110log10(14.4 Kbps) = 42 dB for rate set 2
Help Hot Line (U.S. only): 1-800-530-9960 6-21D-620616-0-20 Rev A CONFIDENTIALLink Budget AnalysisOther CDMA Issues• Never combine multiple sectors (more than one CDMA signal at the same fre-quency) into a Fusion Wideband system. The combined CDMA signals will inter-fere with each other.• Try to minimize overlap between in-building coverage areas that utilize different sectors, as well as in-building coverage and outdoor coverage areas. This is impor-tant because any area in which more than one dominant pilot signal (at the same frequency) is measured by the mobile will result in soft-handoff. Soft-handoff decreases the overall network capacity by allocating multiple channel resources to a single mobile phone.Process Gain The process of de-spreading the desired signal boosts that signal relative to the noise and interference. This gain needs to be included in the link budget. In the following formulas, PG = process gain:PG = 10log10(1.25 MHz / 9.6 Kbps) = 21 dB rate set 1PG = 10log10(1.25 MHz / 14.4 Kbps) = 19 dB rate set 2Note that the process gain can also be expressed as 10log10 (CDMA bandwidth) minus the information rate.Eb/No This is the energy-per-bit divided by the received noise and interference. It’s the CDMA equivalent of sig-nal-to-noise ratio (SNR). This figure depends on the mobile’s receiver and the multipath environment. For example, the multipath delays inside a building are usually too small for a rake receiver in the mobile (or base station) to resolve and coherently combine multipath components. However, if artificial delay can be introduced by, for instance, using different lengths of cable, then the required Eb/No is lower and the mul-tipath fade margin in the link budget can be reduced in some cases.If the receiver noise figure is NF (dB), then the receive sensitivity (dBm) is given by:Psensitivity = NF + Eb/No + thermal noise in a 1.25 MHz band – PG= NF + Eb/No – 113 (dBm/1.25 MHz) – PGNoise Rise On the uplink, the noise floor is determined not only by the Fusion Wideband system, but also by the num-ber of mobiles that are transmitting. This is because when the base station attempts to de-spread a particu-lar mobile’s signal, all other mobile signals appear to be noise. Because the noise floor rises as more mobiles try to communicate with a base station, the more mobiles there are, the more power they have to transmit. Hence, the noise floor rises rapidly:noise rise = 10log10(1 / (1 – loading))where loading is the number of users as a percentage of the theoretical maximum number of users.Typically, a base station is set to limit the loading to 75%. This noise ratio must be included in the link budget as a worst-case condition for uplink sensitivity. If there are less users than 75% of the maximum, then the uplink coverage will be better than predicted.Hand-off Gain CDMA supports soft hand-off, a process by which the mobile communicates simultaneously with more than one base station or more than one sector of a base station. Soft hand-off provides improved receive sensitivity because there are two or more receivers or transmitters involved. A line for hand-off gain is included in the CDMA link budgets worksheet although the gain is set to 0 dB because the in-building system will probably be designed to limit soft-handoff.Table 6-13 Additional Link Budget Considerations for CDMA (continued)Consideration Description
Link Budget Analysis6-22 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A6.6.4 CDMA Link Budget Analysis for a Microcell ApplicationTable 6-14 CDMA Link Budget Analysis: DownlinkLine DownlinkTransmittera. BTS transmit power per traffic channel (dBm) 30.0b. Voice activity factor 50%c. Composite power (dBm) 40.0d. Attenuation between BTS and Fusion Wideband (dB) –24e. Power per channel into Fusion Wideband (dBm) 9.0f. Composite power into Fusion Wideband (dBm) 16.0g. Fusion Wideband gain (dB) 0.0h. Antenna gain (dBi) 3.0i. Radiated power per channel (dBm) 12.0j. Composite radiated power (dBm) 19.0Airlinkk. Handoff gain (dB) 0.0l. Multipath fade margin (dB) 6.0m. Log-normal fade margin with 9 dB std. deviation, 95% area cover-age, 87% edge coverage 10.0n. Additional loss (dB) 0.0o. Body loss (dB) 3.0p. Airlink losses (not including facility path loss) 19.0Receiverq. Mobile noise figure (dB) 7.0r. Thermal noise (dBm/Hz) –174.0s. Receiver interference density (dBm/Hz) –167.0t. Information ratio (dB/Hz) 41.6u. Required Eb/(No+lo)7.0v. Minimum received signal (dBm) –118.4w. Maximum path loss (dB) +99.4
Help Hot Line (U.S. only): 1-800-530-9960 6-23D-620616-0-20 Rev A CONFIDENTIALLink Budget Analysis• b and c: see notes in Table 6-13 regarding power per carrier, downlink• e = a + d• f = c + d• i = e + g + h• j = f + g + h• p = –k + l + m + n + o• s = q + r• v = s + t + u• w = j – p – v• x = j (downlink) + m (uplink) + PwhereP = Ptx + Prx = –73 dB for Cellular–76 dB for PCS
Link Budget Analysis6-24 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev ATable 6-15 CDMA Link Budget Analysis: UplinkLine UplinkReceivera. BTS noise figure (dB) 3.0b. Attenuation between BTS and Fusion Wideband (dB) –30.0c. Fusion Wideband gain (dB) 0.0d. Fusion Wideband noise figure (dB) 22.0e. System noise figure (dB) 33.3f. Thermal noise (dBm/Hz) –174.0g. Noise rise 75% loading (dB) 6.0h. Receiver interference density (dBm/Hz) –134.6i. Information rate (dB/Hz) 41.6j. Required Eb/(No+lo)5.0k. Handoff gain (dB) 0.0l. Antenna gain (dBi) 3.0m. Minimum received signal (dBm) –91.1Airlinkn. Multipath fade margin (dB) 6.0o. Log-normal fade margin with 9 dB std. deviation, 95% area cover-age, 87% edge coverage 10.0p. Additional loss (dB) 0.0q. Body loss (dB) 3.0r. Airlink losses (not including facility path loss) 19.0Transmitters. Mobile transmit power (dBm) 28.0t. Maximum path loss (dB) 100.1
Help Hot Line (U.S. only): 1-800-530-9960 6-25D-620616-0-20 Rev A CONFIDENTIALLink Budget Analysis• e: enter the noise figure and gain of each system component (a, b, c, and d) into the standard cascaded noise figure formula• h = e + f + g• m = h + i + j –k – l• r = n + o + p + q• t = s – r – m6.6.5 Considerations for Re-Radiation (Over-the-Air) SystemsFusion Wideband can be used to extend the coverage of the outdoor network by con-necting to a roof-top donor antenna pointed toward an outdoor base station. Addi-tional considerations for such an application of Fusion Wideband are: • Sizing the gain and output power requirements for a bi-directional amplifier (repeater).• Ensuring that noise radiated on the uplink from the in-building system does not cause the outdoor base station to become desensitized to wireless handsets in the outdoor network.• Filtering out signals that lie in adjacent frequency bands. For instance, if you are providing coverage for Cellular B-band operation it may be necessary to filter out the A, A’ and A” bands which may contain strong signals from other outdoor base stations.Further information on these issues can be found in LGC Wireless’ application notes for re-radiation applications.Fsys = F1 + + + ....F2 – 1G1F3 – 1G1G2whereF = 10(See Rappaport, Theodore S. Wireless Communications, Principles, and Practice. Prentice Hall PTR, 1996.)(Noise Figure/10)G = 10(Gain/10)
Optical Power Budget6-26 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A6.7 Optical Power BudgetFusion Wideband uses SC/APC connectors. The connector losses associated with mating to these connectors is accounted for in the design and should not be included as elements of the optical power budget. The reason is that when the optical power budget is defined, measurements are taken with these connectors in place.The Fusion Wideband optical power budget for both multi-mode and sin-gle-mode fiber cable is 3.0 dB (optical).The maximum loss through the fiber can not exceed 3 dB (optical). The maximum lengths of the fiber cable should not exceed 500m (1,640 ft) for multi-mode and 6 km (19,685 ft) for single-mode. Both the optical budget and the maximum cable length must be taken into consideration when designing the system.NOTE: It is critical to system performance that only SC/APC fiber connectors are used throughout the fiber network, including fiber distribution panels.
Help Hot Line (U.S. only): 1-800-530-9960 6-27D-620616-0-20 Rev A CONFIDENTIALConnecting a Main Hub to a Base Station6.8 Connecting a Main Hub to a Base StationThe Fusion Wideband system supports up to two RF sources: one for Band 1, and one for Band 2. This section explains how each band can be connected to its associated base station.Each Fusion Main Hub band has separate system gain parameters. For example, Band 1 can be set for +5 dB of downlink system gain while Band 2 can have +15 dB of downlink system gain. Thus, each band can be configured as a separate system to allow for full integration to its associated base station.When connecting each of the Fusion Main Hub bands to its base station, the follow-ing equipment may be required: circulators, filter diplexers, directional couplers, combiner/splitters, attenuators, coax cables, and connectors. In addition, use the fol-lowing considerations to achieve optimal performance:1. The downlink power from the base stations must be attenuated enough so that the power radiated by the RAU does not exceed the maximum power per carrier listed in Section 6.3, “Maximum Output Power per Carrier,” on page 6-4.2. The uplink attenuation should be small enough that the sensitivity of the overall system is limited by Fusion Wideband, not by the attenuator. However, some base stations trigger alarms if the noise or signal levels are too high. In this case the attenuation must be large enough to prevent this from happening.CAUTION:The UPLINK and DOWNLINK ports cannot handle a DC power feed from a BTS. If DC power is present, a DC block must be used or the Fusion Wideband Main Hub may be damaged.If, in an area covered by Fusion Wideband, a mobile phone indicates good signal strength but consistently has difficulty completing calls, it is possible that the attenua-tion between Fusion Wideband and the base station needs to be adjusted. In other words, it is possible that if the uplink is over-attenuated, the downlink power will pro-vide good coverage, but the uplink coverage distance will be small.When there is an excessive amount of loss between the Fusion Wideband Main Hub uplink and its associated band’s base station, the uplink system gain can be increased to as much as 15 dB to prevent a reduction in the overall system sensitivity.6.8.1 Uplink AttenuationThe attenuation between the Main Hub’s uplink port and the associated band’s base station reduces both the noise level and the desired signals out of Fusion Wideband. Setting the attenuation on the uplink is a trade-off between keeping the noise and maximum signal levels transmitted from Fusion Wideband to the base station receiver low while not reducing the SNR (signal-to-noise ratio) of the path from the
Connecting a Main Hub to a Base Station6-28 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev ARAU inputs to the base station inputs. This SNR can not be better than the SNR of Fusion Wideband by itself, although it can be significantly worse.A good rule of thumb is to set the uplink attenuation such that the noise level out of Fusion Wideband is within 10 dB of the base station’s sensitivity.6.8.2 RAU Attenuation and ALCThe RAU attenuation and ALC are set using the AdminBrowser Edit Unit Proper-ties screen.Embedded within the uplink RF front-end of each Fusion Wideband RAU band is an ALC circuit. This ALC circuit protects the Fusion Wideband system from overload and excessive intermodulation products due to high-powered mobiles or other signal sources that are within the supported frequency band and are in close proximity to the RAU.Each individual Band (1or 2) of a Fusion Wideband RAU has an uplink ALC circuit that operates as a feedback loop. A power detector measures the level of each band’s uplink RF input and if that level exceeds –30 dBm, an RF attenuator is activated. The level of attenuation is equal to the amount that the input exceeds –30 dBm. The fol-lowing sequence describes the operation of the ALC circuit, as illustrated in Figure 6-2.1. The RF signal level into either Band of the RAU rises above the activation thresh-old (–30 dBm), causing that ALC loop to enter into the attack phase.2. During the attack phase, the ALC loop increases the attenuation (0 to 30 dB) until the detector reading is reduced to the activation threshold. The duration of this attack phase is called the attack time.3. After the attack time, the ALC loop enters the hold phase and maintains a fixed attenuation so long as the high-level RF signal is present.4. The RF signal level drops below the release threshold (–45 dBm) and the ALC loop enters the release phase.5. During the release phase, the ALC loop holds the attenuation for a fixed period then quickly releases the attenuation. An important feature of the ALC loop is that in Step 3, the attenuation is maintained at a fixed level until the signal drops by a significant amount. This prevents the ALC loop from tracking variations in the RF signal itself and distorting the waveform modulation.
Help Hot Line (U.S. only): 1-800-530-9960 6-29D-620616-0-20 Rev A CONFIDENTIALConnecting a Main Hub to a Base StationFigure 6-2 ALC Operation6.8.2.1 Using the RAU 10 dB Attenuation SettingEach RAU band can, independently of the other RAUs in a system, have its uplink or downlink gain attenuated by 10dB in 1dB steps for each RAU band (1 or 2). This is accomplished by selecting the appropriate UPLINK and/or DOWNLINK attenuation for each RAU band in the Edit Unit Properties screen of AdminBrowser for the selected RAU.•Downlink Attenuation: The downlink attenuator provides a mechanism to reduce the signal strength from an RAU band. For instance, this could be for an RAU band located near a window in a tall building that is causing excessive leakage to the macro-network. In such a case it is important to attenuate the downlink only. The uplink should not be attenuated. If the uplink is attenuated, the uplink sensitiv-ity is reduced and mobile phones in the area of that RAU band will have to trans-mit at a higher power. This would increase interference to the outdoor network from such mobiles.•Uplink Attenuation: The uplink attenuator attenuates environmental noise picked up by an RAU band located in an area where heavy electrical machinery is operat-ing. In such environments the electrical noise can be quite high and it is useful to reduce the amount of such noise that gets propagated through the distributed antenna system. Attenuating the uplink of an RAU band located in areas of high electrical noise helps preserve the sensitivity of the rest of the system.The effect of activating the uplink or downlink attenuators is to reduce the coverage area of the adjusted RAU band. The coverage radius will be reduced by roughly a fac-tor of 2. More specifically, if d is the coverage distance without attenuation and d’ is the coverage radius with the attenuation, thenwhere PLS is path loss slope (dBm).Input SignalLevelActivationLevel-30dBmReleaseLevel-45dBmOutput SignalLevelTimeHoldPhaseReleasePhaseAttackPhase12345PLSdBdd/1010'=
Connecting a Main Hub to a Base Station6-30 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A6.8.2.2 Using the Uplink ALC SettingUplink automatic level control (UL ALC) circuitry for each band within the RAU provides automatic level control on high-power signals in the uplink path. This func-tionality is required to prevent RF signal compression caused by a single or multiple wireless devices in very close proximity to the RAU band. Compression causes signal degradation and, ultimately, dropped calls and data errors, and should be prevented. Two settings are available to optimize UL ALC performance:•Multiple Operators: Use when more than one operator and/or protocol is present in the Fusion Wideband system’s band frequency or adjacent frequency bands. This setting is most commonly used.•Single Operator and Protocol: Use when only one operator and protocol is on-the-air within the Fusion Wideband system’s configured and adjacent fre-quency bands. This setting is seldom used.
InterReach Fusion Wideband Installation, Operation, and Reference Manual 7-1D-620616-0-20 Rev A CONFIDENTIALSECTION 7 Installing Fusion Wideband This section contains the following subsections:• Section 7.1 Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1• Section 7.2 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3• Section 7.3 Preparing for System Installation . . . . . . . . . . . . . . . . . . . . . . . . . 7-6• Section 7.4 Fusion Wideband Installation Procedures . . . . . . . . . . . . . . . . . 7-10• Section 7.5 Splicing Fiber Optic Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-40• Section 7.6 Interfacing the Fusion Wideband Main Hub to an RF Source . . 7-42• Section 7.7 Connecting Contact Alarms to a Fusion Wideband System . . . 7-53• Section 7.8 Alarm Monitoring Connectivity Options . . . . . . . . . . . . . . . . . . 7-617.1 Installation RequirementsBefore and during installation, keep in mind these sources of potential problems:• Faulty cabling/connector• Dirty connectors and ports• Malfunction of one or more Fusion Wideband components• Antenna, base station, or repeater problem• External RF interface• Tripped circuit breaker• Equipment is not grounded• Using a crossover Ethernet cable that does not support full hardware handshaking when using AdminBrowser
Installation Requirements7-2 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev ANOTE: Faulty cabling is the cause of a vast majority of problems. All CATV cable should be tested to TIA-570-B specifications. 7.1.1 Component Location RequirementsFusion Wideband components are intended to be installed in indoor locations only.If outdoor installation is desired, such as a parking garage, the Fusion Wideband com-ponents must be installed in the appropriate environmental enclosures.7.1.2 Cable and Connector RequirementsFusion Wideband equipment operates over the following:• CATV 75 Ohm cable with F connectors• Single-mode fiber (SMF) or multi-mode (MMF) cable with SC/APC fiber connec-tors throughout the fiber network, including fiber distribution panelsThese cables are widely-used, industry standards for the cable TV industry. The regu-lations and guidelines for Fusion Wideband cable installation are identical to those specified by the TIA/EIA 568-B standard and the TIA/EIA/570-A standards.LGC Wireless recommends solid copper center conductor, plenum-rated CATV cable and connectors for conformity to building codes, standards, and to ensure stated performance of maximum distance and RF specifications. CommScope 2065V cable or equivalent is required for RG-59.CommScope 2279V cable or equivalent is required for RG-6.CommScope 2293K cable may also be used for RG-11. NOTE: Refer to Appendix A for more information related to 75 Ohm CATV.LGC Wireless recommends connectors with fixed centerpins to ensure proper seating and to eliminate oxidation, which occurs with bare center conductors. Recommended connectors are as follows:CANARE Connectors• FP-C4F for CommScope 2065V cable• FP-C55A for CommScope 2279V cable• FP-C71A for CommScope 2293K cable
Help Hot Line (U.S. only): 1-800-530-9960 7-3D-620616-0-20 Rev A CONFIDENTIALSafety PrecautionsNOTE: The proper crimp tool and die must be matched by the connector type.7.1.3 Distance RequirementsTable 7-1 shows the distances between Fusion Wideband components and related equipment.7.2 Safety Precautions7.2.1 Installation GuidelinesUse the following guidelines when installing LGC Wireless equipment:1. Provide sufficient airflow and cooling to the equipment to prevent heat build-up from exceeding the maximum ambient air temperature specification. Do not com-promise the amount of airflow required for safe operation of the equipment.2. If you are removing the system, turn it off and remove the power cord first. There are no user-serviceable parts inside the components.Table 7-1 Distance RequirementsEquipment Combination Cable Type Cable Length Additional InformationRepeater/BTS to Fusion Wideband Main HubCoaxial; N male connectors 3–6 m (10–20 ft) typical Limited by loss and noise.Refer to your link budget calculation.10 m (33 ft) maximum Limited by CE Mark require-ments.Fusion Wideband Expansion Hub to RAUCATV 75 Ohm; shielded F male con-nectors• Minimum: 10 meters (33 ft)•Maximum: 130 meters (426 ft) for RG-59; 140 meters (459 ft) for RG-6; 235 meters (771 ft) for RG-11Refer to Table 5-1 and Table 5-2.Refer to “System Gain” on page 6-6.Main Hub to Expan-sion Hub Multi-mode fiber: Single-mode fiber: SC/APC male con-nectors500 m (1640 ft.) maximum6 km (19,685 ft.) maximumLimited by 3 dB optical attenuationRAU to passive antenna Coaxial; N male connectors 1–3.5 m (3–12 ft) typical Limited by loss and noise.Refer to your link budgetcalculation.
Safety Precautions7-4 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A3. The internal power supplies have internal fuses that are not user replaceable. Con-sider the worst-case power consumption shown on the product labels when provi-sioning the equipment’s AC power source and distribution.4. Verify that the Hub is grounded properly using the AC power cord third wire ground.NOTE: Be careful with the mechanical loading of the rack mounted hub. Mount the equipment in the rack in such a way that a hazardous condition, due to uneven mechanical loading, does not result,.7.2.2 General Safety PrecautionsThe following precautions apply to LGC Wireless products:• The units have no user-serviceable parts. Faulty or failed units are fully replaceable through LGC Wireless. Please contact us at:1-800-530-9960 (U.S. only)+1-408-952-2400 (International)• When you connect the fiber optic cable, clean all optical fiber SC/APC connectors according to the cable manufacturer’s instructions.• When you connect a radiating antenna to an RAU, firmly hand-tighten the N con-nector – DO NOT over-tighten the connector.WARNING: To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture. The components are intended for indoor use only. Do not install the RAU outdoors. Do not connect an RAU to an antenna that is located outdoors where it could be subject to lightning strikes, power crosses, or wind.• The Expansion Hub and RAU units are designed for intra-building cabling only. Outdoor routing of any cabling to these units shall not exceed 140 feet.NOTE: Outdoor cables farther than 140 feet must be installed with proper lightning protection.7.2.3 Fiber Port Safety PrecautionsThe following are suggested safety precautions for working with fiber ports. For information about system compliance with safety standards, refer to Appendix B.
Help Hot Line (U.S. only): 1-800-530-9960 7-5D-620616-0-20 Rev A CONFIDENTIALSafety PrecautionsWARNING: Observe the following warning about viewing fiber ends in ports. Do not stare with unprotected eyes at the connector ends of the fibers or the ports of the hubs. Invisible infrared radia-tion is present at the front panel of the Main Hub and the Expansion Hub. Do not remove the fiber port dust caps unless the port is going to be used. Do not stare directly into a fiber port.•Test fiber cables: When you test fiber optic cables, connect the optical power source last and disconnect it first. Use Class 1 test equipment.•Fiber ends: Cover any unconnected fiber ends with an approved cap. Do not use tape.•Broken fiber cables: Do not stare with unprotected eyes at any broken ends of the fibers. Laser light emitted from fiber sources can cause eye injury. Avoid contact with broken fibers; they are sharp and can pierce the skin. Report any broken fiber cables and have them replaced.•Cleaning: Be sure the connectors are clean and free of dust or oils. Use only approved methods for cleaning optical fiber connectors.•Modifications: Do not make any unauthorized modifications to this fiber optic system or associated equipment.•Live work: Live work is permitted because LGC Wireless equipment is a Class 1 hazard.•Signs: No warning signs are required.•Class 1 laser product: The system meets the criteria for a Class 1 laser product per IEC 60825-1: 1993+A1:+A2:2001 and IEC106825-2.Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated July 26, 2001.The hazard level at all locations within the equipment is Hazard Level 1.•CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.This mark appears on the front panel of theMain Hub and the Expansion Hub.CLASS 1LASER PRODUCTCLASS 1LASER PRODUCT
Preparing for System Installation7-6 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A7.3 Preparing for System Installation7.3.1 Pre-Installation InspectionFollow this procedure before installing Fusion Wideband equipment:1. Verify the number of packages received against the packing list.2. Check all packages for external damage; report any external damage to the ship-ping carrier. If there is damage, a shipping agent should be present before you unpack and inspect the contents because damage caused during transit is the responsibility of the shipping agent.3. Open and check each package against the packing list. If any items are missing, contact LGC Wireless customer service (refer to Section 7.2.2 on page 7-4).4. If damage is discovered at the time of installation, contact the shipping agent.7.3.2 Installation ChecklistTable 7-2 Installation Checklist3Installation Requirement ConsiderationFloor Plans Installation location of equipment clearly markedSystem Design Used to verify frequency bands after installationPower available:Fusion Wideband Main Hub (AC)Fusion Wideband Expansion Hub (AC)To RAU (DC)Fusion Wideband Main Hub (DC)Fusion Wideband Expansion Hub (DC)Hub’s power cord is 2 m (6.5 ft) long.100/240V, 1A, 50–60 Hz100/240V, 6A, 50-60 Hz54V (from the Hub)38–64VDC, 2.5A38–64VDC, 14ARack space available(Main and Expansion Hub) 89 mm (3.5 in.) high (2U)Wallmount Fusion Wideband Main Hub Hub must be mounted on 3/4” plywood backboard.Clearance for air circulation:Fusion Wideband Main or Expansion HubRAU 76 mm (3 in.) front and rear, 51 mm (2 in.) sides76 mm (3 in.) all aroundSuitable operating environment:Fusion Wideband Main or Expansion HubRAUsIndoor location only0° to +45°C (+32° to +113°F)5% to 95% non-condensing humidity–25° to +45°C (–13° to +113°F)5% to 95% non-condensing humidityDonor Antenna-to-Fusion Wideband Configuration (for each Fusion Wideband Band)Donor Antenna Installed, inspected; N-male to N-male coaxial cable to lightning arrestor/surge suppressorLightning Arrestor or Surge Suppressor Installed between roof-top antenna and repeater; N-male to N-male 50 Ohm coax-ial cable and outdoor cables longer than 140 feet.
Help Hot Line (U.S. only): 1-800-530-9960 7-7D-620616-0-20 Rev A CONFIDENTIALPreparing for System InstallationRepeater Installed between lightning arrestor/surge suppressor and Hub; N-male to N-male coaxial cable. The Repeater must be a UL listed product.Attenuator Installed between the circulator and the Hub downlink port to prevent overload. Optionally, it may be installed between the uplink port and the circulator.Circulator or Duplexer Installed between the repeater and the Hub uplink and downlink portsBase Station-to-Fusion Wideband Configuration (for each Fusion Wideband Band)Base Station Installed, inspected; verify RF power (see tables in Section 6.3 on page 6-4); N-male to N-male coaxial cableAttenuator Attenuation may be required to achieve the desired RF output at the RAU, and the desired uplink noise floor levelCirculator or Duplexer When using a duplex BTS: Installed between the BTS and the Hub uplink and downlink ports. Not used with a simplex BTSConnecting Multiple Fusion Wideband Main Hubs Together5-port Alarm Daisy-Chain Cable (PN 4024-3) For contact alarm monitoring of fault and warning alarms. Used to feed the alarms from multiple Fusion Wideband Main Hubs into a BTS or MetroReach Focus. N.C. Operation.CablingCoaxial: repeater, base station, Smart Source to Fusion Wideband Main Hub Coax approved; N-type male connectors.Coaxial: RAU to passive antennas Use low-loss cable; N male connector; typical 1 m (3.3 ft) using RG142 coaxial cable.Fiber: Main Hub to Expansion Hubs SC/APC (angle-polished) male connectors for entire fiber run (can use SC/APC pigtails, PN 4012SCAPC-10 for MMF or 4013SCAPC-10 for SMF);Use jumper fiber cables for collocated Main and Expansion Hubs (3 m/10 ft.):Multi-mode: PN 401SCAPC-10Single-mode: PN 4018SCAPC-10Distance limited by optical loss of 3 dBMulti-mode up to 500 m (1640 ft.)Single-mode up to 6 km (19,685 ft.)CATV TIA-570-B approved; centerpin F male connectors. CATV connectors must be connected to the shield at both ends. The RAU will be damaged if it is mis-wired.Tie-off cables to avoid damaging the connectors because of cable strain.Fusion Wideband Expansion Hub to RAUs • Minimum: 0 meters (0 ft)• Maximum: RG-59: 130 meters (426 ft) *RG-6: 140 meters (459 ft)RG-11: 235 meters (771 ft)Table 7-2 Installation Checklist (continued)3Installation Requirement Consideration
Preparing for System Installation7-8 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A7.3.3 Tools and Materials Required* Refer to Appendix A for CATV cable requirements.Configuring the SystemPC/laptop running standard browser software Refer to the AdminBrowser User Manual (PN D-620607-0020)MiscellaneousCross-over Ethernet cable Male connectors; Fusion Wideband Main Hub to a PC/laptop running a standard browser to the Fusion Wideband AdminBrowser software; local connection or LAN switch connector for remote connections.Straight-through cable Female/male connectors; Fusion Wideband Main Hub to a modem for a remote connection.DistancesFusion Wideband Main Hub is within 3–6m (10–20 ft) of connecting repeater/BTS/MetroReachIf longer distance, determine the loss of the cable used for this connection and adjust the RF signal for each Band into the Fusion Wideband Main Hub accord-ingly. This can be done by readjusting the power from the base station, or by changing the attenuation value between the base station/repeater and the Hub Bands (1 and 2).Table 7-3 Tools and Materials Required for Component Installation 3DescriptionCable tiesScrewdriverMounting screws and spring nutsScrews, anchors (for mounting RAUs)DrillFiber connector cleaning kitFusion splicerSplicing tool kit (including snips, cladding strippers, fiber cleaver, isopropyl alcohol, lint-free wipes)Fusion splicing sleevesTable 7-2 Installation Checklist (continued)3Installation Requirement Consideration
Help Hot Line (U.S. only): 1-800-530-9960 7-9D-620616-0-20 Rev A CONFIDENTIALPreparing for System Installation7.3.4 Optional AccessoriesTable 7-4 Optional Accessories for Component Installation3DescriptionWall-mount bracket (PN 4712)When using this bracket with an Fusion Wideband Main Hub, the Hub’s mounting bracket must be moved to the alternate mounting position (refer to the procedure on page page 7-11).Cable management (Cable manager: PN 4759; Tie wrap bar: PN 4757)Splice traysPigtails with SC/APC connectors, 3 m (10 ft.)Multi-mode fiber SC/APC pigtail: PN 402SCAPC-10Single-mode fiber SC/APC pigtail: PN 4013SCAPC-10Jumper cable when Main and Expansion Hubs are collocated, 3 m (10 ft.)Multi-mode fiber SC/APC: PN 4018SCAPC-10Teltone Line Sharing Switch (M-394-B-01)When using a single POTS line with multiple Fusion Wideband Main Hub/Modems: Connect up to four modems to a line sharing switch; switches can be cascaded to accommodate up to 16 modems per POTS lineAlarm Cables:5-port Alarm Daisy-Chain Cable (PN 4024-3)Alarm Sense Adapter Cable (PN 4025-1)
Fusion Wideband Installation Procedures7-10 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A7.4 Fusion Wideband Installation ProceduresThe following procedures assume that the system is new from the factory and that it has not been programmed with bands.If you are replacing components in a pre-installed system with either new units or units that may already be programmed (for example, re-using units from another sys-tem), refer to Section 8.• Installing a Fusion Wideband Main Hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11• Installing a Fusion Wideband Main Hub in a Rack . . . . . . . . . . . . . . . . . . 7-11• Using the Wall Rack-Mounting Option . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13• Installing an Optional Cable Manager in the Rack . . . . . . . . . . . . . . . . . . 7-12• Installing a Main Hub Using the 12” Wall-Mounted Rack (PN 4712) . . . 7-12• Installing a Fusion Wideband Main Hub Directly to the Wall . . . . . . . . . . 7-14• Connecting the Fiber Cables to the Main Hub . . . . . . . . . . . . . . . . . . . . . . 7-15• Making Power Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-18• Powering On the Main Hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-23• Installing Expansion Hubs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-25• Installing an Expansion Hub in a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-25• Installing an Expansion Hub Using the 12” Wall-Mounted Rack . . . . . . . 7-26• Installing a Fusion Wideband Expansion Hub Directly to the Wall . . . . . . 7-27• Installing an Optional Cable Manager in the Rack . . . . . . . . . . . . . . . . . . 7-28• Powering On the Expansion Hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-28• Connecting the Fiber Cables to the Expansion Hub . . . . . . . . . . . . . . . . . . 7-29• Connecting the 75 Ohm CATV Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-30• Troubleshooting Expansion Hub LEDs During Installation . . . . . . . . . . . 7-31• Installing RAUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-32• Installing RAUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-32• Installing Passive Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-32• Connecting the Antenna to the RAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-32• Connecting the CATV Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-33• Troubleshooting Using RAU LEDs During Installation . . . . . . . . . . . . . . 7-33• Configuring the Fusion Wideband System . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-34• Connecting a PC to the Main Hub to Run AdminBrowser . . . . . . . . . . . . 7-34• Programming the Main Hub Using AdminBrowser . . . . . . . . . . . . . . . . . . 7-35• Fusion Splicing of Fiber and Pigtail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-40
Help Hot Line (U.S. only): 1-800-530-9960 7-11D-620616-0-20 Rev A CONFIDENTIALFusion Wideband Installation ProceduresThe following procedures assume that the system is installed and programmed.• Interfacing the Fusion Wideband Main Hub to an RF Source . . . . . . . . . . . . . 7-42• Connecting a Single Fusion Wideband Main Hub to an RF Source . . . . . 7-42• Connecting a Fusion Wideband Main Hub to a Roof-top Antenna . . . . . . 7-46• Connecting Multiple Fusion Wideband Main Hubs to an RF Source . . . . 7-47• Connecting Multiple Wideband Main Hubs to a Duplex Repeater or BTS 7-50• Connecting Contact Alarms to a Fusion Wideband System . . . . . . . . . . . . . . 7-53• Alarm Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-54• Alarm Sense . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-57• Alarm Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-59• Alarm Monitoring Connectivity Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-61• Direct Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-61• Modem Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-62• 100 BASE-T Port Expander Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 7-71• POTS Line Sharing Switch Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-72• Ethernet LAN Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-74• SNMP Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-757.4.1 Installing a Fusion Wideband Main HubCAUTION: Install Fusion Wideband Main Hubs in indoor loca-tions only.Installing a Fusion Wideband Main Hub in a RackThe Fusion Wideband Main Hub (2U high) mounts in a standard 19 in. (483 mm) equipment rack. Allow clearance of 76 mm (3 in.) front and rear, and 51 mm (2 in.) on both sides for air circulation. No top or bottom clearance is required.
Fusion Wideband Installation Procedures7-12 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AFigure 7-1 Flush Mounting Bracket DetailConsideration:• The Fusion Wideband Main Hub is shipped with #10-32 mounting screws. Another common rack thread is #12-24. Confirm that the mounting screws match the rack’s threads.To install the Hub in a rack:1. Insert spring nuts into rack where needed or use existing threaded holes.2. Place the Hub into the rack from the front.3. Align the flange holes with the spring nuts installed in Step 1.4. Insert the mounting screws in the appropriate positions in the rack.5. Tighten the mounting screws.Installing an Optional Cable Manager in the Rack• Using the screws provided, fasten the cable manager to the rack, immediately above or below the Main Hub.Installing a Main Hub Using the 12” Wall-Mounted Rack (PN 4712)Considerations:
Help Hot Line (U.S. only): 1-800-530-9960 7-13D-620616-0-20 Rev A CONFIDENTIALFusion Wideband Installation Procedures• The rack-mounting brackets on the Fusion Wideband Main Hub must be moved to the recessed mounting position (shown in Figure 7-2) to allow for the required 76 mm (3 in.) rear clearance.• The maximum weight the bracket can hold is 22.5 kg (50 lbs).• The bracket is designed to accommodate a Fusion Wideband Main Hub (12 lbs.) or an Expansion Hub (14.5 lbs.).• The wall mount bracket should be securely mounted to wall, using the four key slot mounting holes on the bracket.Using the Wall Rack-Mounting OptionYou can flip the rack mounting brackets, as shown in Figure 7-2, so the hub can be mounted 76 mm (3 in.) forward in the rack.Figure 7-2 Bracket Detail For Wall Mount Rack (PN 4712)To install the Hub to the wall-mounted rack:1. Attach the wall bracket (PN 4712) to wall the using #10 Pan Head wood screws, 1-1/2” minimum length for mounting in wood studs or 3/4“thick plywood.The bracket must be positioned so that the Hub will be in a horizontal position when it is installed. (Refer to Figure 7-2.)NOTE: If wall stud spacing of 16” is not available, LGC recommends that 3/4” plywood be pre-installed to the wall. You can then attach the bracket to the plywood using the wood screws.2. Remove both of the rack mounting brackets from the Hub.3. Reattach each of the rack mounting brackets to the recessed wall mount position.
Fusion Wideband Installation Procedures7-14 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A4. Install the Hub in the rack using the rack mounting screws.Installing a Fusion Wideband Main Hub Directly to the Wall To install the Hub directly to the wall:1. Pre-install 3/4” plywood to the wall.2. Mount both of the rack mounting brackets using #10-32 machine screws (refer to illustration Figure 7-4).3. Attach the Hub to the wall so the mounting brackets are orientated at the top and bottom of the wall mounted hub. (Refer to Figure 7-3.)Figure 7-3 Installing Directly to the WallUse two #10 Pan Head wood screws, 1-1/2” length, to secure each bracket to the plywood. In this orientation the enclosure fans shall face to the left.
Help Hot Line (U.S. only): 1-800-530-9960 7-15D-620616-0-20 Rev A CONFIDENTIALFusion Wideband Installation ProceduresFigure 7-4 Using Hub Rack-Mounting Brackets for Direct Wall Installation Connecting the Fiber Cables to the Main HubConsiderations:• Before connecting the fiber cables, confirm that their optical loss does not exceed the 3 dB optical budget.• If you are using fiber distribution panels, confirm that the total optical loss of fiber cable, from the Main Hub through distribution panels and patch cords to the Expansion Hub, does not exceed the optical budget.• Make sure the fiber cable’s connectors are SC/APC (angle-polished). Using any other connector type will result in degraded system performance and may damage the equipment. (You can use an SC/APC pigtail if the fiber cable’s connectors are not SC/APC. Refer to“Fusion Splicing of Fiber and Pigtail” on page 7-40. Or, you can change the fiber’s connector to SC/APC.)NOTE: Observe all Fiber Port Safety Precautions listed in Section 7.2.3 on page 7-4.
Fusion Wideband Installation Procedures7-16 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev ATo clean the fiber ports:You can clean the Hub’s fiber ports using canned compressed air or isopropyl alcohol and foam tipped swabs.Considerations:• If using compressed air:• The air must be free of dust, water, and oil.• Hold the can level during use.• If using isopropyl alcohol and foam tipped swabs:• Use only 98% pure or more alcoholProcedure using compressed air:1. Remove the port’s dust cap.2. Spray the compressed air away from the unit for a few seconds to clean out the nozzle and then blow dust particles out of each fiber port.Procedure using isopropyl alcohol:1. Remove the connector’s dust cap.2. Dip a 2.5mm lint-free, foam-tipped swab in isopropyl alcohol and slowly insert the tip into the connector.3. Gently twist the swab to clean the port.4. Insert a dry swab into the port to dry it.Additionally, you can use compressed air after the alcohol has completely evapo-rated.To clean the fiber ends:Be sure that the fiber cable’s SC/APC connectors are clean and free of dust and oils. You need lint-free cloths, isopropyl alcohol, and compressed air1. Moisten a lint-free cloth with isopropyl alcohol.2. Gently wipe the fiber end with the moistened cloth.3. Using a dry lint-free cloth, gently wipe the fiber end.4. Spray the compressed air away from the connector for a few seconds to clean out the nozzle and then use it to completely dry the connector.To test the fiber cables:Perform cable testing and record the results. Test results are required for the final As-Built Document.To connect the fiber cables:The fiber cable is labeled with either 1 or 2, or is color-coded. In addition to these labels, you should add a code that identifies which port on the Main Hub is being
Help Hot Line (U.S. only): 1-800-530-9960 7-17D-620616-0-20 Rev A CONFIDENTIALFusion Wideband Installation Proceduresused and which Expansion Hub the cables are intended for. This differentiates the connectors for proper connection between the Main Hub and Expansion Hubs.For example:First pair to Main Hub port 1: 11 (uplink), 12 (downlink); Second pair to Main Hub port 2: 21 (uplink), 22 (downlink); Third pair to Main Hub port 3: 31 (uplink), 32 (downlink); and so on.NOTE: The Fusion Wideband One Port Main Hub (PN: FSN-1-MH-1P) configuration is a cost reduced version of the Fusion Wideband Main Hub and supports only one Expansion Hub (up to 8 RAUs).If the fiber jumper is labeled with 1 or 2:1. Connect 1s to UPLINK ports on the Main Hub.2. Connect 2s to DOWNLINK ports on the Main Hub.3. Record which cable number and port number you connected to UPLINK and DOWNLINK.This information is needed when connecting the other end of the fiber cable to the Expansion Hub’s fiber ports.The fiber port LEDs should be off, indicating that the Expansion Hub(s) are not connected.If the fiber jumper is color-coded (for example, “blue” or “red”):1. Connect “blue” to UPLINK ports on the Main Hub.2. Connect “red” to DOWNLINK ports on the Main Hub.3. Record which color and port number you connected to UPLINK and DOWNLINK.This information is needed when connecting the other end of the fiber cable to the Expansion Hub’s fiber ports.The fiber port LEDs should be off, indicating that the Expansion Hub(s) are not connected.
Fusion Wideband Installation Procedures7-18 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AMaking Power ConnectionsOnly trained and qualified personnel should be allowed to install or replace this equipment.AC Powered Main HubTo connect AC power to a Main Hub:1. Connect the AC power cord to the Main Hub.2. Plug the power cord into an AC power outlet.DC Powered Main Hub and Expansion HubWARNING: The protective earth connection should be connected before proceeding with power connections. Confirm the DC power source is powered off during installation. Damage to hubs may result if power is connected improperly.The DC powered Main Hub and Expansion Hub are intended to be powered by a +48VDC power source. The hubs are designed for 14AWG to 6AWG wire size connections. Use only UL listed AWM wire, rated 600V and 90 degrees C.If wires larger than 6AWG are needed from the DC power source, follow local codes for reducing the wire size at hub connection point.Follow local codes for routing of power cables to power source.The unit should be connected to a DC branch circuit breaker. A suitable discon-nect device must be provided in the DC branch, either a circuit breaker or switch, that can be employed to disconnect power to the system during servicing.To connect DC power to a Main Hub or Expansion Hub:1. Strip 5/8” (16mm) of wire insulation material off each power wire.2. Insert the +48VDC wire into the compression terminal at the “+” location.3. Insert the -48VDC wire into the compression terminal at the “-” location.4. Bare wire ends should be fully inserted into terminal.5. Use a flat blade screw driver to fasten the wire inside the compression terminal.6. For the Protective Ground Wire (Figure 7-5), use 14AWG minimum wire with a #8-32 stud size ring lug.Figure 7-5 Protective Ground Wire Connection
Help Hot Line (U.S. only): 1-800-530-9960 7-19D-620616-0-20 Rev A CONFIDENTIALFusion Wideband Installation ProceduresWARNING: The warning color code of the power cables depends on the color coding of the DC power source installed at your site. Color code standards for DC wiring do not exist. To ensure that the correct polarity is connected to the hubs, confirm the connection of the power cables to the + (positive) and - (negative) leads (Figure 7-6) at the power source.Figure 7-6 DC Terminals7. Use the illustrations in Figure 7-7 and Figure 7-9 to connect the power.Figure 7-7 Power Screw Locations
Fusion Wideband Installation Procedures7-20 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A8. Install the clear protective cover with the pan head screws as shown in Figure 7-8.Figure 7-8 Pan Head Screw LocationFigure 7-9 Recommended Hub Wire Routing
Help Hot Line (U.S. only): 1-800-530-9960 7-21D-620616-0-20 Rev A CONFIDENTIALFusion Wideband Installation ProceduresOptional Connection to DC Power SourceThis is an optional connection method using ring tongue lugs instead of the com-pression lugs that are premounted on the terminal block. Use wire selection instructions previously explained.WARNING: Before connecting power wires, be sure the power source is shut off, and the power switch of the hubs are in the OFF position. Connect the ground wires before connecting the power wires.1. Remove the existing compression lugs by first removing the mounting screws as shown in Figure 7-10.Figure 7-10 Compression Lug and Mounting Screw Locations2. Connect the safety ground wire as previously explained and shown in Figure 7-11. Use 14AWG minimum wire with a #8-32 stud size ring lug as shown in Figure 7-12.
Fusion Wideband Installation Procedures7-22 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AFigure 7-11 Grounding Wire ConnectionFigure 7-12 Power Wires and Studs3. Install the finish wires using the proper polarity and secure them with #8-32 pan head screws previously removed as illustrated in Figure 7-13.
Help Hot Line (U.S. only): 1-800-530-9960 7-23D-620616-0-20 Rev A CONFIDENTIALFusion Wideband Installation ProceduresFigure 7-13 Wire Polarity Illustration4. Attach the clear protective cover and secure it with the two #8-32 pan head screws supplied with the Hub as shown in Figure 7-14.Figure 7-14 DC Illustration DetailPowering On the Main Hub1. Connect the AC or DC power as explained in “Making Power Connections” on page 7-18.2. Turn on the power to the Main Hub and check that all the LED lamps are func-tioning properly.
Fusion Wideband Installation Procedures7-24 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AUpon power-up, the LEDs blinks for five seconds as a visual check that they are functioning. After the five-second test:LED states during power on will vary, depending on whether Expansion Hubs are connected. Refer to Table 7-5 for possible combinations.Table 7-5 Troubleshooting Main Hub LEDs During InstallationDuringInstallation Power On LED State Action Impact1.Main Hub power is On with no Expansion Hubs con-nected.POWEROff Check AC power; check that the Main Hub power-on switch is on; replace the Main Hub The Main Hub is not powering on.POWER Red Replace the Main Hub The power supply is out-of-specification.PORTLEDs are on but they didn’t blink through all statesReplace the Main Hub. The micro controller is not resetting properly; flash memory cor-rupted.PORTRed The port is unusable; replace the Main Hub when possible. Fiber sensor fault, do not use the port.Off2.Main Hub power is On with Expansion Hubs con-nected and powered on.PORTOff • If the port LEDs do not illuminate, check the fiber uplink for excessive optical loss.• If Expansion Hub’s DL STATUS LED is red:• Verify that the fiber is connected to the correct port (that is, uplink/downlink)• Swap the uplink and downlink cables.• Connect the fiber pair to another port. If the sec-ond port’s LEDs do not illuminate Green/Red, replace the Main Hub.• If the second port works, flag the first port as unusable; replace the Main Hub when possible.No uplink optical power, the Expansion Hub is not recognized as being present.No communication with the Expansion Hub.PORTRed (60 ppm) • If the Expansion Hub DL STATUS LED is red, check the downlink fiber cable for excessive opti-cal loss.• Connect the fiber pair to another port. If the sec-ond port’s LEDs do not illuminate Green/Red, replace the Main Hub.• If the second port works, flag the first port as unusable; replace the Main Hub when possible.No communication with the Expansion Hub.PORTRed The Expansion Hub or connected RAU reports a faultUse AdminManager to determine the problem.The Expansion Hub or one or more RAUs are off-line.
Help Hot Line (U.S. only): 1-800-530-9960 7-25D-620616-0-20 Rev A CONFIDENTIALFusion Wideband Installation Procedures7.4.2 Installing Expansion HubsThe Expansion Hub (2U high) can be installed in a standard 19 in. (483 mm) equip-ment rack or in a wall-mountable equipment rack that is available from LGC Wire-less. Allow a clearance of 76 mm (3 in.) front and rear and 51 mm (2 in.) sides for air circulation. No top and bottom clearance is required.CAUTION: Install Expansion Hubs in indoor locations only.Installing an Expansion Hub in a RackConsideration:• The Expansion Hub is shipped with #10-32 mounting screws. Another common rack thread is #12-24. Confirm that the mounting screws match the rack’s threads.Figure 7-15 Flush Mounting Bracket DetailTo install the hub in a rack:1. Insert spring nuts into the rack where needed or use existing threaded holes.2. Place the Expansion Hub into the rack from the front.3. Align the flange holes with the spring nuts installed in Step 1.4. Insert the mounting screws in the appropriate positions in the rack.5. Tighten the mounting screws.
Fusion Wideband Installation Procedures7-26 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AInstalling an Expansion Hub Using the 12” Wall-Mounted RackConsiderations:• The rack (PN4712) is 305 mm (12 in.) deep. The Expansion Hub is 381 mm (15 in.) deep. You must move the rack mounting brackets on the Expansion Hub, as shown in Figure 7-16) to the center mounting position to allow for the 76 mm (3 in.) rear clearance that is required.• The maximum weight the rack can hold is 22.5 kg (50 lbs).Figure 7-16 Bracket Detail For Wall Mount Rack (PN 4712)To install the hub in a wall-mounted rack:1. Attach the equipment rack to the wall using the screws that are provided.The rack must be positioned so that the Expansion Hub will be in a horizontal position when it is installed.NOTE: If wall stud spacing of 16” is not available, LGC recommends that 3/4” plywood be pre-installed to the wall. You can then attach the bracket to the plywood using the wood screws.2. Remove both of the rack mounting brackets from the Hub.3. Reattach each of the rack mounting brackets to the recessed wall mount position (Figure 7-16).4. Install the Hub in the rack using the rack mounting screws.5. Tighten the mounting screws.
Help Hot Line (U.S. only): 1-800-530-9960 7-27D-620616-0-20 Rev A CONFIDENTIALFusion Wideband Installation ProceduresInstalling a Fusion Wideband Expansion Hub Directly to the Wall To install the Hub directly to the wall:1. Pre-install 3/4” plywood to the wall.2. Mount both of the rack mounting brackets using #10-32 machine screws (refer to illustration Figure 7-17).3. Attach the Hub to the wall so the mounting brackets are orientated at the top and bottom of the wall mounted hub. (Refer to Figure 7-18.)Figure 7-17 Using Hub Rack-Mounting Brackets for Direct Wall Installation
Fusion Wideband Installation Procedures7-28 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AFigure 7-18 Installing Directly to the WallNOTE: Leave the dust caps on the fiber ports until you are ready to connect the fiber optic cables.Installing an Optional Cable Manager in the Rack• Using the screws provided, fasten the cable manager to the rack, immediately above or below the Expansion Hub.Powering On the Expansion Hub1. Connect the AC or DC power as explained in “Making Power Connections” on page 7-18.
Help Hot Line (U.S. only): 1-800-530-9960 7-29D-620616-0-20 Rev A CONFIDENTIALFusion Wideband Installation Procedures2. Turn on the power to the Expansion Hub and check that all the LED lamps are functioning properly.Upon power-up, the LEDs blinks for five seconds as a visual check that they are functioning. After the five-second test:• The POWER and UL STATUS LEDs should be green.– If the uplink fiber is not connected, the UL STATUS LED turns red indicating that there is no communication with the Main Hub.• The E-HUB STATUS and DL STATUS LEDs should be red.• All port LEDs should be off because no RAUs are connected yet.Connecting the Fiber Cables to the Expansion HubConsiderations:• Before connecting the fiber cables, confirm that their optical loss does not exceed 3 dB optical budget. RL is less than -60dB.• If fiber distribution panels are used, confirm that the total optical loss of fiber cable, from the Main Hub through distribution panels and patch cords to the Expansion Hub, does not exceed the optical budget.• Make sure the fiber cable’s connectors are SC/APC (angle-polished).Using any other connector type will result in degraded system performance and may damage the equipment. (You can use an SC/APC pigtail if the fiber cable’s connectors are not SC/APC, refer to “Fusion Splicing of Fiber and Pigtail” on page 7-40, or replace the connectors.)NOTE: Observe all Fiber Port Safety Precautions listed in Section 7.2.3 on page 7-4.To connect the fiber cables:The fiber cable is labeled with either 1 or 2, or is color-coded. For proper connection between the Main Hub ports and the Expansion Hub ports, refer to the numbering or color-coded connections you recorded when installing the Main Hub(s).If the fiber jumper is labeled with 1 or 2:1. Connect 2 to DOWNLINK on Expansion Hub.The DL STATUS LED should turn green as soon as you connect the fiber. If it does not, there is a downlink problem. Make sure you are connecting the correct cable to the port.2. Connect 1 to UPLINK on Expansion Hub.The UL STATUS LED turns green on the first Main Hub communication. It may take up to 20 seconds to establish communication.The Expansion Hub’s E-HUB STATUS LED turns green when the Main Hub sends it the frequency band command.
Fusion Wideband Installation Procedures7-30 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AIf the UL STATUS and E-HUB STATUS LEDs do not turn green/green, check the Main Hub LEDs. Refer to page 7-24, item 2 in Table 7-5.If the fiber jumper is color-coded (for example, “blue” or “red”):1. Connect “red” to DOWNLINK on Expansion Hub.The DL STATUS LED should turn green as soon as you connect the fiber. If it does not, there is a downlink problem. Make sure you are connecting the correct cable to the port.2. Connect “blue” to UPLINK on Expansion Hub.The UL STATUS LED turns green on the first Main Hub communication. It may take up to 20 seconds to establish communication.The Expansion Hub’s E-HUB STATUS LED turns green when the Main Hub sends it the frequency band command.If the UL STATUS and E-HUB STATUS LEDs do not turn green/green, check the Main Hub LEDs. See page 7-24, item 2 in Table 7-5.Connecting the 75 Ohm CATV CablesConsiderations:• Verify that the cable has been tested and the test results are recorded. This informa-tion is required for the As-Built Document. • Verify that only captive centerpin F connectors are used on the solid copper center conductor CATV cable from CommScope (or equivalent).• Verify that the CATV cable is labeled with:• Fusion Wideband Expansion Hub port number being used• RAU identifier• Carrier (for multiple operator systems)To connect the CATV cables:1. Connect the CATV cables to the F ports according to the labels on the cables.The STATUS LEDs should be off because the RAUs are not connected at the other end of the CATV cable.2. Record which cable you are connecting to which port (that is, from the label on the cable).This information is required for the As-Built Document.3. Tie-off the cables or use the optional cable manager to avoid damaging the con-nectors because of cable strain.
Help Hot Line (U.S. only): 1-800-530-9960 7-31D-620616-0-20 Rev A CONFIDENTIALFusion Wideband Installation ProceduresTroubleshooting Expansion Hub LEDs During Installation• All Expansion Hub PORT LEDs with RAUs connected should indicate Green/Red. This indicates that the RAU is powered on and communication has been estab-lished.• The Expansion Hub UL STATUS LED should be Green.Table 7-6 Troubleshooting Expansion Hub LEDs During InstallationDuringInstallation LED State Action Impact1. Expansion Hub power is On and no RAUs are connectedPOWER Off Check AC power; make sure the Expansion Hub power-on switch is on; replace the Expansion Hub.The Expansion Hub is not powering on.PORT LEDs are on but didn’t blink through all states.Replace the Expansion Hub. The Microcontroller is not resetting properly; flash memory corrupted.PORT Flashing Red (6 PPM) Port unusable; replace the Expan-sion Hub when possible. Current sensor fault; do not use the port.UL STATUS Red, after power-up blink Replace the Expansion Hub. The Expansion Hub laser is not operational; no uplink between the Expansion Hub and Main Hub.UL STATUSRedCheck the Main Hub LEDsRefer to page 7-24, item 2 in Table 7-5.Use AdminBrowser to determine the problem.No communication with Main Hub.DL STATUS Red Check the downlink fiber for opti-cal power; verify that the cables are connected to correct ports (that is, uplink/downlink)Check the Main Hub LEDs. Refer to page 7-24, item 2 in Table 7-5.No downlink between the Expansion Hub and Main Hub.2. Expansion Hub power is On and RAUs are connectedPORT Off Check the CATV cable. Power is not getting to the RAU.PORT Flashing Red (60 PPM) Test the CATV cable. If the cable tests OK, try another port. If the second port’s LEDs are Red/Off, replace the RAU. If the second RAU doesn’t work; replace the Expansion Hub.Power levels to RAU are not correct; communications are not established.If the second port works, flag the first port as unusable; replace EH when possible.PORT Red Use AdminBrowser to determine the problem. RAU is off-line.
Fusion Wideband Installation Procedures7-32 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A7.4.3 Installing RAUsCAUTION: Install RAUs in indoor locations only. Do not con-nect an antenna that is installed in an outdoor location to an RAU. For outdoor installations, a protective enclosure is required.Installing RAUsMount all RAUs in the locations marked on the floor plans.Considerations:• You can place the unit, without its fastening hardware, on a flat surface, such as a shelf, desk, cabinet, or any other horizontal surface that allows stable placement with the mounting base facing down to the mounting surface. For mounting to other locations (that is, walls, ceilings, poles) the RAU must be securely mounted using the 4 slotted mounting holes provided with #6 diameter fasteners. This method of mounting must securely hold a minimum of 7 lbs. load.• Attach the RAU securely to a stationary object (that is, a wall, pole, or ceiling tile).• For proper ventilation:• Keep at least 76 mm (3 in.) clearance around the RAU to ensure proper venting.• Do not stack RAUs on top of each other.• Always mount the RAU with the solid face (containing the mounting holes) against the mounting surface.Installing Passive AntennasRefer to the manufacturer’s installation instructions to install passive antennas.LocationPassive antennas are usually installed below the ceiling. If they are installed above the ceiling, you must consider the additional loss due to the ceiling material when estimating the antenna coverage area.Connecting the Antenna to the RAUConnect a passive multi-band antenna to the N connector on the RAU using coaxial cable with the least amount of loss possible.CAUTION: Firmly hand-tighten the N connector – DO NOT over-tighten the connector.
Help Hot Line (U.S. only): 1-800-530-9960 7-33D-620616-0-20 Rev A CONFIDENTIALFusion Wideband Installation ProceduresConnecting the CATV CableConsiderations:• Verify that the cable has been tested and the test results are recorded. This informa-tion is required for the As-Built Document.• Verify that only captive centerpin 75 Ohm Type-F connectors are used on the solid copper center conductor CATV 75 Ohm cable.• Verify that the CATV cable is labeled with:• Fusion Wideband Main Hub port number being used• RAU identifier• Carrier (for multiple operator systems)To connect the CATV cable:1. Connect the CATV cables to the F female port on the RAU according to the label on the cable.Power is supplied by the Fusion Wideband Main Hub over the CATV cable con-ductors. Upon power up, the LEDs will blink for two seconds as a visual check that they are functioning. After the two-second test:• The LINK LED should be green indicating it is receiving power and communi-cations from the Fusion Wideband Main Hub.• The ALARM LED should be red until the Fusion Wideband Main Hub issues the band command, within about 20 seconds, then it should be green.2. Record which cable you are connecting to the RAU (from the label on the cable).This information is required for the As-Built Document.3. Tie-off cables or use the optional cable manager to avoid damaging the connec-tors because of cable strain.7.4.3.1 Troubleshooting Using RAU LEDs During Installation• The LINK LED should be green and remain green for longer than 90 seconds. The ALARM LEDs are red when the system band has not been programmed.
Fusion Wideband Installation Procedures7-34 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A7.4.4 Configuring the Fusion Wideband SystemBefore the system can operate properly, use AdminBrowser to program the Fusion Wideband Main Hub with the frequency bands that are to be distributed. The Hub must be programmed with the same frequencies as the RAU used.NOTE: The frequency bands should automatically be set on power up and this step should not be required.Considerations:• The AdminBrowser software, described in the AdminBrowser User Manual (PN D-620607-0-20), must be running on a PC/laptop.• Crossover Ethernet cable with male connectors required.Connecting a PC to the Main Hub to Run AdminBrowser1. Connect the AC power cord to the Hub.Make sure the Hub is grounded through the ground lug on the AC power and the frame ground lug as required. The warranty does not cover damage caused when an ungrounded Hub is powered on.2. Plug the power cord into an AC power outlet.3. Verify that all cables are properly connected on the Hub.4. Turn on the power to the Hub.Table 7-7 Troubleshooting RAU LEDs During InstallationDuringInstallation LED State Action ImpactThe RAU is connected to the Fusion Wide-band Expansion Hub, which is powered onLINK Off Check CATV cable. No power to the RAU.ALARM OffLINK Green • Check CATV cable• Check Hub LEDsRefer to page 7-31, item 2 in Table 7-6.• Use AdminBrowser to determine the problem.The RAU is off-line.ALARM RedLINK Red from green, after cables are connected for 60 seconds• Check CATV cable.• Check the Hub LEDs.• Use AdminBrowser to determine the problem.No communications between the RAU and the Hub.ALARM Red
Help Hot Line (U.S. only): 1-800-530-9960 7-35D-620616-0-20 Rev A CONFIDENTIALFusion Wideband Installation ProceduresAll LEDs blink through the power up sequence. At each port where an RAU is detected (drawing current), the port LEDs lights green. The Fusion Wideband STATUS LED is orange during system boot and should turn green after about 90 seconds if it finds no faults. This state indicates the band’s are not programmed and provides feedback on the status of the RAU connections.The LEDs blink for 20 seconds as a visual check that they are functioning.5. Connect the cross-over Ethernet cable to the PC/laptop and then to the RJ-45 100-BASE-T port on the Hub’s front panel.Programming the Main Hub Using AdminBrowser• Connect the provided TCP/IP crossover cable to the laptop and then to the Admin/LAN RJ-45 port on the Fusion Wideband Main Hub’s front panel.• Turn on the laptop and start the Fusion Wideband Main Hub.Windows 20001. Right-click My Network Places and select Properties.2. Highlight Internet Protocol (TCP/IP) and click Properties. A screen similar to the Figure 7-19 appears.Figure 7-19 Internet Protocol (TCP/IP) Properties Window
Fusion Wideband Installation Procedures7-36 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A3. Make note of the current IP address, Subnet mask, and Default gateway, if they are configured. You will need to re-enter them after you have configured the Fusion Wideband Main Hub.4. Select Use the following IP address.5. Change the IP address to 192.168.0.1016. Change the Subnet mask to 255.255.255.07. Change the Default gateway to 192.168.0.18. Click OK twice. You may be asked if you want to reboot your computer. If so, click Yes.Windows XP1. Click Start>Settings>Network Connections>Local Area Connection. The win-dow shown in Figure 7-20 appears.Figure 7-20 Local Area Connection Properties Window2. In the This connection uses the following items, scroll down to and select Internet Protocol (TCP/IP) and click Properties.3. Perform steps 3 through 8 in the preceding section.Using AdminBrowser1. Launch your web browser, type Https://192.168.0.100in the URL line, and click Go.
Help Hot Line (U.S. only): 1-800-530-9960 7-37D-620616-0-20 Rev A CONFIDENTIALFusion Wideband Installation Procedures2. When AdminBrowser appears, log in using the default password: password.3. Click System Configuration and then click Set Date/Time. A page similar to Figure 7-21 appears.Figure 7-21 Set Time and Date Window4. Enter the desired time and date in the format indicated on the page and click Set Date/Time. A page appears requiring you to reboot the system for the new date and time to take effect.5. Select the Fusion Wideband Main Hub and click Install/Configure System. A screen similar to the Figure 7-22 appears.Figure 7-22 AdminBrowser Configuration Window6. If desired, type in a label.The label is the system name displayed next to the icons and used in messages.It can be up to 32 characters long depending upon the firmware version.
Fusion Wideband Installation Procedures7-38 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AThe default system label is “Fusion” and will be used if you enter nothing.7. Type in a Date and Time or leave the current system date and time unchanged. Enter time is a 24-hour format.8. Use the next section to schedule a System Test.This section allows you to do the following:• Click the check box to enable this feature.• Click the check box to cause system test on power up.• Enter values to schedule the date and time of the next system test.• Enter values to specify the recurrence of the test by day or by week.Schedule System Test allows periodic, automatic execution of the system end-to-end test. Just like Perform System Test, a Schedule System Test suspends normal service for the duration of the test; calls are dropped, and no new calls can be established during the test. Test duration depends on the configuration (number of RAUs) and requires one or two minutes to complete.After completion of the system test, the scheduled system test time is updated to the next test time, and an event log entry is made.9. Use the scroll bar on the left side of the page to scroll down to view the rest of the page as shown in Figure 7-23.Figure 7-23 AdminBrowser Configuration Window (continued)10. In the Band area, do the following:• You should not have to select the bands. The system self configures the band by validating that all the RAUs connected are the same type.• When both bands are not configured, use the Shutdown check box. The system will ignore any alarms generated from the shutdown bands.
Help Hot Line (U.S. only): 1-800-530-9960 7-39D-620616-0-20 Rev A CONFIDENTIALFusion Wideband Installation Procedures• Use the pull-down to specify the Uplink and Downlink gain for each band. You can set system gain within the specified range in 1 dB increments.• Use the pull-down to set the Uplink Automatic Level Control to either “Single” or “Multiple” for each band in the system. (The default is “Multiple.”11. In the Input/Output Alarms area, do the following for each Alarm Sense:• Enable each Alarm Sense by using the check box.• Use the pull-down to set the Normal State to Closed or Opened. (The default is “Closed.”• Assign a label to each alarm sense.12. When you have completed inputting the desired information, click Install System to configure the system.During configuration all disconnect statuses are cleared for attached RAUs; the frequency band, gain, and system label are set; logs are cleared; the system test is performed; and finally the system tree is refreshed. The icons should be:Indicating that the band is correctly set.Indicating that communications are OK.If there are problems, the icons will be different and a message is displayed in the Messages pane.13. Connect the Main Hub to the RF source (for example, BTS or BDA).Do not exceed the maximum input RF power (1 Watt) to the Fusion Wide-band Main Hub. Exceeding the limit could cause permanent damage to the Hub.CAUTION:Only carriers and their approved installers or LGC-authorized installers are allowed to connect to the RF source. Serious damage to the equipment can occur if it is over-driven.The Fusion Wideband system should now be operational. Using a mobile phone, walk your site and test the signal strength.14. Make sure to change the TCP/IP setting in your laptop back to their original val-ues.NOTE: LGC Wireless’ equipment is designed to operate in the licensed frequency bands of mobile, cellular, and PCS operators. In the USA, the EU, and most countries this equipment may only be used by the licensee, his authorized agents or those with written authorization to do so. Similarly, unauthorized use is illegal, and subjects the owner to the corresponding legal
Splicing Fiber Optic Cable7-40 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev Asanctions of the national jurisdiction involved. Ownership of LGC Wireless equipment carries no automatic right of use. 7.5 Splicing Fiber Optic CableThe fiber cable must have SC/APC connectors for the entire run. If it does not, you can splice a pigtail, which has SC/APC connectors, to the fiber cable.LGC offers two pigtails: one for single-mode fiber (PN 4013SCAPC-3) and one for multi-mode fiber (PN 4012SCAPC-3).LGC Wireless recommends fusion splices because they have the lowest splice loss and return loss. Mechanical splices have higher losses and higher back reflection than fusion splices and are not recommended.Using a fusion splicer involves fusing together two butted and cleaved ends of fiber. The fusion splicer aligns the fibers and maintains alignment during the fusion pro-cess. fusion splices have very low loss (typically less than 0.05 dB) and very low back reflection (return loss). Fusion splices should be organized in a splice tray designed to store and protect the splices.Fusion Splicing of Fiber and PigtailBefore you begin, make sure the fusion splicer is set to the proper mode (that is, single- or multi-mode).To fusion splice the fiber optic cable to the SC/APC pigtail: Option A1. Secure both the fiber cable and the SC/APC pigtail in a splice tray that is installed immediately adjacent to the Hub.2. Prepare the fiber end by cutting back the polyethylene jacket, the kevlar or fiber-glass strength members, the extruded coating, and the buffer coating in order to expose the “bare fiber” – cladding plus core.Ensure that sufficient slack is maintained in order to be able to reach the fusion splicer.3. Clean the unclad fiber core using isopropyl alcohol and lint-free wipes.4. Cleave the unclad fiber to the length prescribed by the fusion splicer’s specifica-tion sheets.5. Repeat steps 2 through 4 for the SC/APC pigtail.6. Pass the splice sleeve onto the fiber strand.7. Position both fiber ends in the fusion splicer and complete splice in accordance with the fusion splicer’s operation instructions.
Help Hot Line (U.S. only): 1-800-530-9960 7-41D-620616-0-20 Rev A CONFIDENTIALSplicing Fiber Optic Cable8. Ensure that the estimated loss for the splice as measured by the fusion splicer is 0.10 dB or better.9. Slide the fusion splicing sleeve over the point of the fusion splice.10. Place the sleeve and fused fiber into the fusion splicer’s heater.11. Allow time for the splice sleeve to cure.12. Return fiber splice to the splice tray, store the sleeve in a splice holder within the tray, and store excess cable length in accordance with the tray manufacture’s directions.After successfully testing the fiber, plug the SC/APC pigtail into the proper opti-cal port on the Hub.To fusion splice the fiber optic cable to the SC/APC pigtail: Option B1. Secure both the fiber cable and the SC/APC pigtail in a splice tray portion of a fiber distribution panel.2. Prepare the fiber end by cutting back the polyethylene jacket, the kevlar or fiber-glass strength members, the extruded coating, and the buffer coating in order to expose the “bare fiber” – cladding plus core.Ensure that sufficient slack is maintained in order to be able to reach the fusion splicer.3. Clean the unclad fiber core using isopropyl alcohol and lint-free wipes.4. Cleave the unclad fiber to the length prescribed by the fusion splicer’s specifica-tion sheets.5. Repeat steps 2 through 4 for the SC/APC pigtail.6. Pass the splice sleeve onto the fiber strand.7. Position both fiber ends in the fusion splicer and complete splice in accordance with the fusion splicer’s operation instructions.8. Ensure that the estimated loss for the splice as measured by the fusion splicer is 0.10 dB or better.9. Slide the fusion splicing sleeve over the point of the fusion splice.10. Place the sleeve and fused fiber into the fusion splicer’s heater.11. Allow time for the splice sleeve to cure.12. Return fiber splice to the splice tray, store the sleeve in a splice holder within the tray, and store excess cable length in accordance with the tray manufacture’s directions.13. After successfully testing the fiber cable, plug the SC/APC pigtail into the back side of the SC/APC bulkhead in the Fiber Distribution Panel.Install a SC/APC patch cord between the front side of the SC/APC bulkhead and the proper optical port on the Hub.NOTE: Refer to Section 9 for troubleshooting.
Interfacing the Fusion Wideband Main Hub to an RF Source7-42 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A7.6 Interfacing the Fusion Wideband Main Hub to an RF SourceWARNING: Only LGC personnel or LGC-authorized installation per-sonnel should connect the Fusion Wideband Main Hub to its Band associated base station or repeater. Exceeding the maximum input power could cause failure of the Fusion Wideband Main Hub (refer to Section 5.2 on page 5-4 for maximum power specifications). If the maximum composite power is too high, attenuation is required.7.6.1 Connecting a Single Fusion Wideband Main Hub to an RF SourceThe Fusion Wideband system supports three RF sources, one for Band 1 and Band 2. This section explains how each Band can be connected to its associated RF source.Connecting a Fusion Wideband Main Hub to an In-Building BTSWARNING: Only LGC personnel or LGC-authorized installation per-sonnel should connect the Fusion Wideband Main Hub to a base station or repeater. Exceeding the maximum input power could cause failure of the Fusion Wideband Main Hub (refer to Section 5.2 on page 5-4 for maxi-mum power specifications). If the maximum composite power is too high, atten-uation is required.CAUTION:The UPLINK and DOWNLINK ports cannot handle a DC power feed from the base station. If DC power is present, a DC block must be used or the hub may be damaged.Connecting a Simplex Base Station to a Fusion Wideband Main Hub RF Band:1. Connect an N-male to N-male coaxial cable to the transmit simplex connector on the base station.2. Connect the other end of the N-male to N-male coaxial cable to the DOWNLINK connector on the Hub for the corresponding Band 1 or Band 2.3. Connect an N-male to N-male coaxial cable to the receive simplex connector on the base station.4. Connect the other end of the N-male to N-male coaxial cable to the UPLINK con-nector on the Hub for the corresponding Band 1 or Band 2.
Help Hot Line (U.S. only): 1-800-530-9960 7-43D-620616-0-20 Rev A CONFIDENTIALInterfacing the Fusion Wideband Main Hub to an RF SourceFigure 7-24 Simplex Base Station to a Fusion Wideband Main Hub Connecting a Duplex Base Station to a Fusion Wideband Main Hub:When connecting to a duplex base station, use a circulator or duplexer between it and the Fusion Wideband Main Hub.You can insert attenuators between the circulator or duplexer and Hub as needed.1. Connect an N-male to N-male coaxial cable to the duplex connector on the base station.2. Connect the other N-male connector or duplexer to a circulator.3. Connect an N-male to N-male coaxial cable to the DOWNLINK connector on the Hub for Band 1 and Band 2.4. Connect the other end of the N-male coaxial cable to the transmit connector on the circulator.5. Connect an N-male to N-male coaxial cable to the UPLINK connector on the Hub for Band 1 and Band 2.6. Connect the other end of the N-male coaxial cable to the receive connector on the circulator.N-male to N-maleCoaxial CableBase StationSimplex T1/E1 toMobileSwitchingCenterInsert attenuator, if neededNote: This applies to either Band 1 and Band 2.Band 1 Band 2 Band 3UL1 UL2 UL3DL1 DL2 DL3AC PowerAlarmsBand 2
Interfacing the Fusion Wideband Main Hub to an RF Source7-44 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AFigure 7-25 Duplex Base Station to a Fusion Wideband Main Hub N-male to N-maleCoaxial CableBase StationDuplex T1/E1 toMobileSwitchingCenterInsert attenuator, if needed N-male to N-maleCoaxial CableNote: This applies to either Band 1 and Band 2.Band 1 Band 2 Band 3UL1 UL2 UL3DL1 DL2 DL3AC PowerAlarmsCirculator
Help Hot Line (U.S. only): 1-800-530-9960 7-45D-620616-0-20 Rev A CONFIDENTIALInterfacing the Fusion Wideband Main Hub to an RF SourceConnecting a Fusion Wideband Main Hub RF Band to Multiple BTSsWARNING: Only LGC personnel or LGC-authorized installation per-sonnel should connect the Fusion Wideband Main Hub to a base station or repeater. Exceeding the maximum input power could cause failure of the Fusion Wideband Main Hub (refer to Section 5.2 on page 5-4 for maximum power specifications). If the maximum composite power is too high, attenuation is required.You can use power combiner/splitters to connect a Fusion Wideband Main Hub RF Band to multiple base stations, as shown in Figure 7-26.Figure 7-26 Connecting a Fusion Wideband Main Hub to Multiple Base StationsN-male to N-maleCoaxial Jumper CablesN-male to N-maleCoaxial Jumper Cableto Repeater orBase Stationbetween Combiner/Splitter andN-male to N-maleCoaxial Jumper Cablesbetween Combiner/Splitter andFusion Main Hub’s Uplink Port Fusion Main Hub’s Downlink Port for2 x 1 PowerCombiner/Splitter 2 x 1 PowerCombiner/SplitterBTS 1UL DLBTS 2UL DLInsert attenuators, if neededfor each on Band 1 or Band 2 either Band 1 or Band 2Band 1 Band 2 Band 3UL1 UL2 UL3DL1 DL2 DL3AC PowerAlarms
Interfacing the Fusion Wideband Main Hub to an RF Source7-46 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AConnecting a Fusion Wideband Main Hub to a Roof-top AntennaLGC Wireless recommends that you use a lightning arrestor or surge protector in a roof-top antenna configuration. Insert the lightning arrestor or surge protector between the roof-top antenna and the repeater connected to the Fusion Wideband Main Hub RF Band.1. Connect an N-male to N-male coaxial cable to the roof-top antenna.2. Connect the other end of the N-male to N-male coaxial cable to the grounded surge suppressor.3. Connect an N-male to N-male coaxial cable to the grounded surge suppressor.4. Connect the other end of the N-male to N-male coaxial cable to the repeater.5. Connect an N-male to N-male coaxial cable to the repeater.6. Connect the other end of the N-male to N-male coaxial cable to the circulator 1connector.7. Connect an N-male to N-male coaxial cable to the circulator 2connector.8. Connect the other end of the N-male to N-male coaxial cable to the DOWNLINK connector on the Hub for either Band 1 or Band 2.Attenuation may be required to achieve the desired RF output at the RAU.9. Connect an N-male to N-male coaxial cable to the circulator 3connector.10. Connect the other end of the N-male to N-male coaxial cable to the UPLINK con-nector on the Hub for either Band 1 or Band 2.Figure 7-27 Connecting a Fusion Wideband Main Hub to a Roof-top AntennaRoof-topAntennaGroundedSurge Suppressor RepeaterN-male to N-maleCoaxial CablesN-male to N-maleCoaxial CableN-male to N-maleCoaxial Cable CirculatorAttenuator(optional)Note: This applies to either Band 1 or Band 2.Band 1 Band 2 Band 3UL1 UL2 UL3DL1 DL2 DL3AC PowerAlarms123
Help Hot Line (U.S. only): 1-800-530-9960 7-47D-620616-0-20 Rev A CONFIDENTIALInterfacing the Fusion Wideband Main Hub to an RF SourceConnecting a Fusion Wideband Main Hub to MetroReach FocusRefer to the MetroReach Focus manual for information.7.6.2 Connecting Multiple Fusion Wideband Main Hubs to an RF SourceYou can use power combiner/splitters as splitters to connect multiple Fusion Wide-band Main Hubs in order to increase the total number of RAUs in a system. You can also use power combiner/splitters to combine base station channels in order to increase the number of RF carriers the system transports.Connecting Multiple Fusion Wideband Main Hubs to a Simplex Repeater or BTSWARNING: Only LGC personnel or LGC-authorized installation per-sonnel should connect the Fusion Wideband Main Hub to a base station or repeater. Exceeding the maximum input power could cause failure of the Fusion Wideband Main Hub (refer to Section 5.2 on page 5-4 for maximum power specifications). If the maximum composite power is too high, attenuation is required.Considerations:• 2 hybrid power combiner/splitters; one for uplink and one for downlink (2x1 for two Fusion Wideband Main Hubs, 3x1 for three, 4x1 for four, and so on.)• 1 N-male to N-male coaxial jumper cable between each power combiner/splitter and the base station• 2 N-male to N-male coaxial jumper cables between each power combiner/splitter and each Fusion Wideband Main Hub RF Band (either Band 1 or Band 2)Procedure:1. Connect the power combiner/splitters to the repeater or base station using N-male to N-male coaxial jumper cables:a. From the first power combiner/splitter to the repeater or base station UPLINKb. From the second power combiner/splitter to the repeater or base station DOWNLINK2. Connect the power combiner/splitters to the Hubs:a. From the first Hub’s UPLINK port (Band 1 or Band 2) to the first power com-biner/splitterb. From the first Hub’s DOWNLINK port (Band 1 or Band 2) to the second power combiner/splitterc. From the second Hub’s UPLINK port (Band 1 or Band 2) to the first power combiner/splitter
Interfacing the Fusion Wideband Main Hub to an RF Source7-48 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev Ad. From the second Hub’s DOWNLINK port (Band 1 or Band 2) to the second power combiner/splitterNOTE: Connections should not cross Bands. For example, all Band 1 connections should be made to the same hybrid power combiner/splitter connected to the repeater BTS that matches the Band 1 frequency.3. Check Hub LEDs.After connecting and powering on the Hub, check all LEDs to ensure that the sys-tem is operating properly.Make sure the Hub is grounded. The warranty does not cover damage caused when an ungrounded Hub is powered on.NOTE: Use a 50 ohm terminator on any unused power combiner/splitter ports.Figure 7-28 shows how to connect two Main Hubs to a simplex repeater or base sta-tion. Connecting two Hubs increases the total number of supportable RAUs from 8 to 16.
Help Hot Line (U.S. only): 1-800-530-9960 7-49D-620616-0-20 Rev A CONFIDENTIALInterfacing the Fusion Wideband Main Hub to an RF SourceFigure 7-28 Connecting Two Fusion Wideband Main Hub’s RF Band Ports to a Simplex Repeater or Base Station N-male to N-maleCoaxial Jumper CablesN-male to N-maleCoaxial Jumper Cableto Repeater orBase Station2 x 1 PowerCombiner/SplitterN-male to N-maleCoaxial Jumper Cableto Repeater orBase Stationbetween Combiner/Splitter andN-male to N-maleCoaxial Jumper Cablesbetween Combiner/Splitter andFusion Main Hub’s Uplink Port for Fusion Main Hub’s Downlink Port for 2 x 1 PowerCombiner/Splittereither Band 1 or Band 2 either Band 1 or Band 2Band 1 Band 2 Band 3UL1 UL2 UL3DL1 DL2 DL3AC PowerAlarmsBand 1 Band 2 Band 3UL1 UL2 UL3DL1 DL2 DL3AC PowerAlarms
Interfacing the Fusion Wideband Main Hub to an RF Source7-50 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AConnecting Multiple Wideband Main Hubs to a Duplex Repeater or BTSWARNING: Only LGC personnel or LGC-authorized installation per-sonnel should connect the Fusion Wideband Main Hub to a base station or repeater. Exceeding the maximum input power could cause failure of the Fusion Wideband Main Hub (refer to Section 5.2 on page 5-4 for maximum power specifications). If the maximum composite power is too high, attenuation is required.Considerations:• 2 hybrid power combiner/splitters; one for uplink and one for downlink (2x1 for two Fusion Wideband Main Hubs, 3x1 for three, 4x1 for four, and so.)• 2 N-male to N-male coaxial jumper cables to connect each Fusion Wideband Main Hub’s RF Band to the power combiner/splitters• 1 circulator• 1 N-male to N-male coaxial jumper cable between each circulator and the repeater or base station• 1 N-male to N-male coaxial jumper cable between each circulator and power com-biner/splitterProcedure:1. Connect the circulator to the repeater or base station using one N-male to N-male coaxial jumper cable.2. Connect each power combiner/splitter to the circulator using one N-male to N-male coaxial jumper cable per combiner/splitter.3. Connect the power combiner/splitter to the Hubs using N-male to N-male coaxial jumper cable:a. From the first Hub’s UPLINK (Band 1 or Band 2) port to the first power com-biner/splitterb. From the first Hub’s DOWNLINK (Band 1 or Band 2) port to the second power combiner/splitterc. From the second Hub’s UPLINK (Band 1 or Band 2) port to the first power combiner/splitterd. From the second Hub’s DOWNLINK (Band 1 or Band 2) port to the second power combiner/splitterNOTE: Connections should not cross Bands. For example, all Band 1 connections should be made to the same hybrid power combiner/splitter connected to the repeater BTS that matches the Band 1 frequency.
Help Hot Line (U.S. only): 1-800-530-9960 7-51D-620616-0-20 Rev A CONFIDENTIALInterfacing the Fusion Wideband Main Hub to an RF Source4. Check Hub LEDs.After connecting and powering on the Hub, check all LEDs to ensure that the sys-tem is operating properly.Make sure the Main Hub is grounded. The warranty does not cover damage caused when an ungrounded Hub is powered on.NOTE: Use a 50 ohm terminator on any unused power combiner/splitter ports.Figure 7-29 shows how to connect two Hubs to a duplex repeater or base station. You need to use one circulator and one more coaxial jumper cable, as shown.
Interfacing the Fusion Wideband Main Hub to an RF Source7-52 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AFigure 7-29 Connecting Two Fusion Wideband Main Hub’s RF Band Ports to a Duplex Repeater or Base Station N-male to N-maleCoaxial Jumper Cables2 x 1 PowerCombiner/Splitterbetween Combiner/Splitter andN-male to N-maleCoaxial Jumper Cablesbetween Combiner/Splitter andFusion Main Hub’s Uplink Port Fusion Main Hub’s Downlink Port for2 x 1 PowerCombiner/SplitterN-male to N-maleCoaxial Jumper CableN-male to N-maleCoaxial Jumper CableCirculatorN-male to N-maleCoaxial Jumper Cableto Repeater orBase StationInsert attenuator, if neededfor either Band 1 or Band 2 either Band 1 or Band 2Band 1 Band 2 Band 3UL1 UL2 UL3DL1 DL2 DL3AC PowerAlarmsBand 1 Band 2 Band 3UL1 UL2 UL3DL1 DL2 DL3AC PowerAlarms
Help Hot Line (U.S. only): 1-800-530-9960 7-53D-620616-0-20 Rev A CONFIDENTIALConnecting Contact Alarms to a Fusion Wideband System7.7 Connecting Contact Alarms to a Fusion Wideband SystemThe Fusion Wideband Main Hub can generate (source) two contact alarms as well as sense three external contact alarm.• Alarm Source (refer to Section 7.7.1 on page 7-54)The Fusion Wideband Main Hub has two alarm contacts, fault (major) and warn-ing (minor). These contacts are normally-closed (NC) and will open when an inter-nal alarm is detected.NOTE: The contact can be changed to normally-open (NO) with Admin-Browser. This is not recommended since no alarm would be sent if power to the Fusion Wideband Main Hub fails.• Fault is activated when any faults or disconnects are detected.• Warning is activated when any warning conditions are detected except lockout or when the end-to-end system test is not valid.• Alarm Sense (refer to Section 7.7.2 on page 7-57)The Fusion Wideband Main Hub can monitor 3 external alarm contacts. Each port can be configured for normally-open (NO) or normally-closed (NC) contacts. The interface expects a set of floating contacts, and an external voltage source is not required for this interface. Use AdminBrowser to monitor the port status.Table 7-8 lists the alarm types, equipment to which the Fusion Wideband Main Hub is connected, cable(s) used, and the faults and warnings that are detected.Table 7-8 Alarm TypesNote that MetroReach Focus supports only faults (major errors).Alarm TypeFusion Wideband Connected to Cable(s) Used Errors DetectedSource MetroReach 5-port Alarm Daisy-Chain Cable FaultsSource BTS 5-port Alarm Daisy-Chain Cable Faults and WarningsIn addition, a custom daisy-chain cable-to-BTS interface cable is required. Make this interface cable to the desired length and with the appropriate pin placement.Sense Unison 5-port Alarm Daisy-Chain Cable and the Alarm Sense Adapter CableFaults
Connecting Contact Alarms to a Fusion Wideband System7-54 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A7.7.1 Alarm SourceFusion Wideband always acts as an alarm source, no matter what type of equipment you are connecting to. Refer to Section 7.7.2 on page 7-57 if you want Fusion Wide-band to sense Unison contact closures or other external alarms.Using MetroReach Focus to Monitor Fusion WidebandWhen you connect MetroReach Focus to the Fusion Wideband, the Fusion Wideband Main Hub is the output of the alarms (alarm source) and Focus is the input (alarm sense), as shown in Figure 7-30. Focus supports only faults (major errors).Figure 7-30 Connecting MetroReach to Fusion Wideband RF OUTDOWNLINK RF INUPLINKFIBERUPLINKDOWNLINKALARMRS-232CMetroReachFocusRFMAlarmSenseAlarmSourceAlarmSource5-port Alarm Daisy-Chain CableMay need9-pin Adapter,which shipswith the cableFusion Main HubBand 1 Band 2 Band 3UL1 UL2 UL3DL1 DL2 DL3AC PowerAlarmsBand 1 Band 2 Band 3UL1 UL2 UL3DL1 DL2 DL3AC PowerAlarms
Help Hot Line (U.S. only): 1-800-530-9960 7-55D-620616-0-20 Rev A CONFIDENTIALConnecting Contact Alarms to a Fusion Wideband SystemUsing a Base Station to Monitor Fusion WidebandNOTE: The BTS must be configured, by the carrier, for contact closure monitoring prior to connecting a Fusion Wideband Main Hub to it.When you connect a BTS to Fusion Wideband, the Fusion Wideband Main Hub is the output of the alarms (alarm source) and the BTS is the input (alarm sense), as shown in Figure 7-31. An interface cable is required between the daisy-chain cable and the BTS. Because BTS alarm interface pinouts and Fusion Wideband-to-BTS distances vary, this cable is often custom and wired on-site. Refer to Section 3.2.1 for Alarm Contact details (Normally Closed).Figure 7-31 Using a BTS to Monitor Fusion Wideband NOTE: For normally open contacts, the fault and warning contacts need to be wired in parallel with other Main Hubs.NOTE: LGC Wireless does not recommend using normally open contacts.BTSInterfaceCableAlarmSenseAlarmSourceAlarmSource5-port Alarm Daisy-Chain CableFusion Main Hub(custom made, on-site)Band 1 Band 2 Band 3UL1 UL2 UL3DL1 DL2 DL3AC PowerAlarmsBand 1 Band 2 Band 3UL1 UL2 UL3DL1 DL2 DL3AC PowerAlarms
Connecting Contact Alarms to a Fusion Wideband System7-56 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AUsing a Base Station and AdminBrowser to Monitor Fusion WidebandNOTE: The BTS must be configured, by the carrier, for contact closure monitoring prior to connecting a Fusion Wideband Main Hub to it.In order to take full advantage of Fusion Wideband’s OA&M capabilities you can use LGC Wireless’ AdminBrowser software in addition to a BTS to monitor the system, as shown in Figure 7-32. Refer to Section 7.8.6 for SNMP optional feature capabili-ties.Figure 7-32 Using a BTS and AdminBrowser to Monitor Fusion WidebandLine SwitchStraight-through modem cable connectedto Fusion Wideband Main Hub’s front panel serial portPSTN ModemPC runningStandard BrowserSoftwareBTSInterfaceCableAlarmSenseAlarmSourceAlarmSource5-port Alarm Daisy-Chain CableFusion Main HubModemModemBand 1 Band 2 Band 3UL1 UL2 UL3DL1 DL2 DL3AC PowerAlarmsBand 1 Band 2 Band 3UL1 UL2 UL3DL1 DL2 DL3AC PowerAlarms
Help Hot Line (U.S. only): 1-800-530-9960 7-57D-620616-0-20 Rev A CONFIDENTIALConnecting Contact Alarms to a Fusion Wideband System7.7.2 Alarm SenseUse AdminBrowser to enable the Fusion Wideband system for “alarm sense” when connecting to the contact closure of Unison Main Hubs or other external alarms (refer to Set Contact Sense Properties in the AdminBrowser User Manual).Using Fusion Wideband to Monitor UnisonWhen you connect Unison to Fusion Wideband, the Fusion Wideband Main Hub is the input of the alarms (alarm sense) and the Unison is the output (alarm source), as shown in Figure 7-33. The input alarm sense needs to be set to normally closed (NC).Figure 7-33 Using Fusion Wideband to Monitor UnisonUnison supports only faults. You must use the Alarm Sense Adapter Cable (refer to page 7-60) to interface the daisy-chain cable to Fusion Wideband. The adapter cable is required because it translates the Unison fault pinout to the sense input pins on the Fusion Wideband Main Hub.Up to 5 Unison Main HubsFusion Wideband Main HubAlarmSense AlarmSourceAlarmSourceAlarm SenseAdapter Cable5-port Alarm Daisy-Chain CableBand 1 Band 2 Band 3UL1 UL2 UL3DL1 DL2 DL3AC PowerAlarms
Connecting Contact Alarms to a Fusion Wideband System7-58 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AFigure 7-34 Alarm Sense Contacts81Diagnostic IExternalEquipmentContacts+5V
Help Hot Line (U.S. only): 1-800-530-9960 7-59D-620616-0-20 Rev A CONFIDENTIALConnecting Contact Alarms to a Fusion Wideband System7.7.3 Alarm Cables5-port Alarm Daisy-Chain CableFigure 7-35 shows the 5-port Alarm Daisy-Chain Cable (PN 4024-3), which supports fault and warning conditions.Figure 7-35 5-port Alarm Daisy-Chain CableDB-9 female toBase Station,MetroReach Focus,orJ1Female J2MaleJ3MaleJ4MaleJ5MaleJ6MaleJ7FemaleTer minatorSpliceSpliceSpliceSpliceSpliceSpliceSpliceSplice79457945794579457945741.2 meters (4 feet).5 meter(1.5 feet)DB-9 male to Fusion,Unison, MetroReachFocus, Alarm PortDB-9 male to Fusion,Unison, MetroReachFocus Alarm Port DB-9 male to Fusion,Unison, MetroReachFocus Alarm PortDB-9 male to Fusion,Unison, MetroReachFocus Alarm PortOption 1: DB-9 to Fusion,Unison, MetroReachFocusAlarm Port.J7 not usedOption 2: Use J2-J5for alarm ports. J6 is usedto connect to an additionalAlarm Daisy-Chain Cable.J7 is not used.Option 3: Connectfewer than 5 ports andterminate the daisy chainby connecting J7 to thelowest unused port.ConnectorHood.5 meter(1.5 feet).5 meter(1.5 feet).5 meter(1.5 feet).25 meter(.75 feet)the Alarm SenseAdapter Cable whenconnecting UnisonNOTE: Do not daisy-chain Fusion Wideband Main Hubs with MetroReach Focus if you want both faults and warnings from Fusion. Only faults are reported if you combine Fusion with MetroReach in the same daisy chain.7945
Connecting Contact Alarms to a Fusion Wideband System7-60 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AAlarm Sense Adapter CableThe alarm sense adapter cable (PN 4025-1) translates the Unison fault pinout to the sense input pins on the Fusion Wideband Main Hub. You must use this adapter cable, illustrated in Figure 7-36, with the 5-port Alarm Daisy-Chain Cable when connecting Unison to Fusion Wideband.Figure 7-36 Alarm Sense Adapter CableJ818J979To Fusion To Daisy-Chain Cable3 feet
Help Hot Line (U.S. only): 1-800-530-9960 7-61D-620616-0-20 Rev A CONFIDENTIALAlarm Monitoring Connectivity Options7.8 Alarm Monitoring Connectivity OptionsThe following connectivity options are described:• Section 7.8.1 Direct Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-61• Section 7.8.2 Modem Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-62• Section 7.8.3 100 BASE-T Port Expander Connection . . . . . . . . . . . . . . . . . 7-71• Section 7.8.4 POTS Line Sharing Switch Connection . . . . . . . . . . . . . . . . . . 7-72• Section 7.8.5 Ethernet LAN Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-74• Section 7.8.6 SNMP Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-75Note that the only accessory available through LGC Wireless is the Ethernet cross-over 100 BASE-T cable, which is provided with AdminBrowser.7.8.1 Direct ConnectionIn this configuration, the PC connects directly to the RJ-45 100 BASE-T port on the Fusion Wideband Main Hub’s front panel using a cross-over cable.Figure 7-37 OA&M Direct ConnectionNOTE: The cross-over cable provided with the Fusion Wideband Main Hub supports full hardware handshaking, which is required. Refer to Appendix A.4 on page A-8 for cable wiring information.PC runningSoftwareCross-over 100 BASE-T CableStandard BrowserAdminBrower is residentin Fusion Wideband.
Alarm Monitoring Connectivity Options7-62 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A7.8.2 Modem ConnectionIn this configuration, the PC and the Fusion Wideband Main Hub connect to modems and communicate using a standard dial-up telephone connection.Figure 7-38 OA&M Modem Connection NOTE: Refer to Appendix A.3 on page A-7 for the modem cable wiring informa-tion.Modem switch settings are as follows for US Robotics modem:• PC-side: 1, 2 and 6 Up • Fusion Wideband Hub-side: 2 and 6 Up7.8.2.1 Setting Up Fusion Wideband Modem Using AdminBrowserUse the following steps to set up a PPP Dial-In on Fusion Wideband:1. Start AdminBrowser as explained in the AdminBrowser manual.2. Select System Configuration.3. Select Setup Modem Connection. The window shown in Figure 7-39 appears.Straight-throughmodem cablePC runningSoftwareStandard BrowserModemStraight-through modem cablePSTN Modem
Help Hot Line (U.S. only): 1-800-530-9960 7-63D-620616-0-20 Rev A CONFIDENTIALAlarm Monitoring Connectivity OptionsFigure 7-39 Default Dial-in Settings (Fusion Wideband Hub)4. Make the desired changes.5. Click Setup Connection.7.8.2.2 Setting Up a PC Modem Using WindowsUse the following sets to set up a dial-up connection on your PC:1. Click Start, Settings, Network Connections. The window shown in Figure 7-40 appears.
Alarm Monitoring Connectivity Options7-64 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AFigure 7-40 Network Connections Window2. Click Create a new connection. The window shown in Figure 7-41 appears.Figure 7-41 New Connection Wizard - Welcome Window3. Click Next. The window shown in Figure 7-42 appears.
Help Hot Line (U.S. only): 1-800-530-9960 7-65D-620616-0-20 Rev A CONFIDENTIALAlarm Monitoring Connectivity OptionsFigure 7-42 New Connection Wizard - Network Connection Type Window4. Select Connect to the network at my workplace and click Next. The window shown in Figure 7-43 appears.Figure 7-43 New Connection Wizard - Network Connection Window5. Select Dial-up connection and click Next. The window shown in Figure 7-44 appears.
Alarm Monitoring Connectivity Options7-66 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AFigure 7-44 New Connection Wizard - Connection Name Window6. Type a name for this connection and click Next. The window shown in Figure 7-45 appears.Figure 7-45 New Connection Wizard - Phone Number to Dial Window7. Type the desired dial in phone number and click Next. The window shown in Figure 7-46 appears.
Help Hot Line (U.S. only): 1-800-530-9960 7-67D-620616-0-20 Rev A CONFIDENTIALAlarm Monitoring Connectivity OptionsFigure 7-46 New Connection Wizard - Connection Availability Window8. Select Anyone’s use and click Next. The window shown in Figure 7-47 appears.Figure 7-47 New Connection Wizard - Completing New Connection Window9. Click Finish. The window shown in Figure 7-48 appears.
Alarm Monitoring Connectivity Options7-68 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AFigure 7-48 Connect Fusion Wideband Hub Window10. Type a password as indicated and click Properties. The window shown in Figure 7-49 appears.The default parameters are as follows:• User name: pppuser• Password (one word, all lower case): passwordFigure 7-49 Fusion Wideband Hub Properties Window11. Click Configure... The window shown in Figure 7-50 appears.
Help Hot Line (U.S. only): 1-800-530-9960 7-69D-620616-0-20 Rev A CONFIDENTIALAlarm Monitoring Connectivity OptionsFigure 7-50 Modem Configuration Window12. Select the modem speed and other parameters for your modem as desired and click OK. 13. Select the Security tab. The window shown in Figure 7-51 appears.Figure 7-51 Fusion Wideband Hub Properties - Security Tab Window14. Select Typical and then click the Networking tab. The window shown in Figure 7-52 appears.
Alarm Monitoring Connectivity Options7-70 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AFigure 7-52 Fusion Wideband Hub Properties - Networking Tab Window15. Select Internet Protocol (TCP/IP) as shown and click Properties. The window shown in Figure 7-53 appears.Figure 7-53 Internet Protocol Properties Window16. Select Obtain an IP address automatically and Obtain DNS server address automatically and click OK.17. To connect to the Fusion Wideband Hub over the Dial-up connection, start you web browser and type the server IP address configured in Section 7.8.2.1 in the address bar.
Help Hot Line (U.S. only): 1-800-530-9960 7-71D-620616-0-20 Rev A CONFIDENTIALAlarm Monitoring Connectivity Options7.8.3 100 BASE-T Port Expander ConnectionIn this configuration a LAN switch is used to allow the connection of multiple devices to a single PC with a 100 BASE-T port. Testing was performed with a Link-sys 4-port switch. A standard RJ-45 Ethernet cable must be made to connect the LAN switch to the Fusion Wideband Main Hub. Figure 7-54 OA&M Connection using a 232 Port ExpanderLAN switch100 BASE-T Ethernet connectionRJ-45 male to RJ-45 male100 BASE-T CablePC runningSoftwareStandard BrowserAdminBrowser software is residentin Fusion Wideband.
Alarm Monitoring Connectivity Options7-72 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A7.8.4 POTS Line Sharing Switch ConnectionUsing a line sharing switch, you can connect up to four modems to a single telephone line. Testing was performed with a Teltone Line Sharing Switch, model number M-394-B-01.Figure 7-55 OA&M Connection Using a POTS Line Sharing SwitchUp to 16 modems can be monitored using a single telephone line by cascading line sharing switches, as shown in Figure 7-56.ModemPSTNLine Sharing SwitchUp to 4 modemsper SwitchModemModemStraight-throughmodem cableStraight-throughmodem cablePC runningSoftwareStandard BrowserStandard phone cable
Help Hot Line (U.S. only): 1-800-530-9960 7-73D-620616-0-20 Rev A CONFIDENTIALAlarm Monitoring Connectivity OptionsFigure 7-56 Cascading Line Sharing SwitchesModemPSTNLine Sharing SwitchLine Sharing Switch Line Sharing Switch Line Sharing Switch Line Sharing SwitchModemModemModemModemModemModemModemModemModemModemModemModemModemModemModemModemStraight-throughmodem cableStraight-throughmodemcablesPC runningSoftwareStandard BrowserStandard phone cable
Alarm Monitoring Connectivity Options7-74 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A7.8.5 Ethernet LAN ConnectionAn Ethernet LAN connection can be used to communicate between the PC and Fusion Wideband. Testing was performed with an Linksys 4-port LAN switch.Figure 7-57 OA&M Connection Using Ethernet and ENET/232 Serial HubLANSwitchTCP/IPEthernet 100 BASE-T CableRJ-45 to RJ-45 maleEthernetPC runningSoftwareStandard Browser
Help Hot Line (U.S. only): 1-800-530-9960 7-75D-620616-0-20 Rev A CONFIDENTIALAlarm Monitoring Connectivity Options7.8.6 SNMP InterfaceFaults and warnings can also be diagnosed with SNMP using a standard (NMS) net-work management system (optional). SNMP resident software in Fusion Wideband provides SNMP interactions for Traps and Notification.The Fusion Wideband SNMP includes a MIB for integrating into the Network Man-agement System (NMS) and supports SNMPv1 and SNMPv2c.Figure 7-58 Fusion Wideband SNMP Configuration Options
Alarm Monitoring Connectivity Options7-76 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A
InterReach Fusion Wideband Installation, Operation, and Reference Manual 8-1D-x620616-0-20 Rev A CONFIDENTIALSECTION 8 Replacing Fusion Wideband ComponentsThis section contains the following subsections:• Section 8.1 Replacing an RAU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1• Section 8.2 Replacing a Fusion Wideband Expansion Hub . . . . . . . . . . . . . . 8-3• Section 8.3 Replacing a Fusion Wideband Main Hub . . . . . . . . . . . . . . . . . . 8-48.1 Replacing an RAUBe aware that the new RAU must support the same bands as the one you are replac-ing. If the RAU is of the wrong band combination, it will not operate properly in the system.Replacing an RAU1. Using AdminBrowser, log in and click SYSTEM INFORMATION.2. Click SHOW SYSTEM TREE, select Fusion Wideband Main Hub, and click GET SYS-TEM INFORMATION.All system settings for Hubs and RAUs will be displayed. Write down or save the Uplink and Downlink Attenuation setting so you can set the new RAU with the same settings.3. Click CANCEL to close the window.4. Verify that the new RAU is of the same frequency bands as the one replaced.5. Disconnect the CATV cable and antenna cable from the unit to be replaced.6. Install the new RAU.7. Connect the antenna cable and then the CATV cable to the new RAU.8. Click SYSTEM CONFIGURATION.9. Click SHOW SYSTEM TREE.10. Select the Fusion Wideband RAU replaced and click EDIT UNIT PROPERTIES.
Replacing an RAU8-2 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-x620616-0-20 Rev A11. Set the attenuation of each band as the old RAU was programmed and click SAVE PROPERTIES.Perform System TestWhen convenient, perform System Test to optimize performance.During System Test, the entire system is temporarily off-line and no RF is being transmitted. Checking the RAU’s LEDs1. The RAU’s LINK and ALARM LEDs should blink (green/red) on power up.• If the LEDs do not blink on power up, replace the RAU.2. After several seconds both LEDs should change to green, which indicates that the unit has been successfully replaced, there is communication with the Hub, and the RAU band is correct.a. If the LINK LED remains green and the ALARM LED remains red, verify that the RAU model is correct for the intended frequency band.– Disconnect the cable and then reconnect it once; doing this more than once will not change the result.b. If both LEDs still don’t change to green, use AdminBrowser to determine the exact nature of the fault and see a recommendation of how to correct it.c. If both LEDs turn red (after 90 seconds), the Hub has terminated communica-tions.
Help Hot Line (U.S. only): 1-800-530-9960 8-3D-x620616-0-20 Rev A CONFIDENTIALReplacing a Fusion Wideband Expansion Hub8.2 Replacing a Fusion Wideband Expansion HubReplacing a Fusion Wideband Expansion Hub1. Turn off the power to the Expansion Hub.2. Disconnect all CATV cables, both fiber cables, and the AC power cord.3. Replace the Expansion Hub with a new one.4. Connect the AC power cord, all CATV cables, and both fiber cables – remember-ing to clean and correctly connect the uplink and downlink fiber.5. Turn on the power to the Expansion Hub.AdminBrowser Tasks• The Main Hub automatically issues the band setting.• When convenient, use AdminBrowser to perform System Test in order to optimize performance.During System Test, the entire system is temporarily off-line and no RF is being transmitted. For a fully loaded system (one Main Hub, four Expansion Hubs, and 32 RAUs), it can take up to 1.5 minutes to complete the test.Checking the Expansion Hub’s LEDs• The LEDs should blink through all states on power up.• If the LEDs do not blink on power up, replace the Expansion Hub.• If the LEDs do not illuminate at all, make sure the AC power cable is con-nected.• The UL STATUS and DL STATUS LEDs should be green.• The E-HUB STATUS and POWER LEDs should be green.• For each CATV port that has an RAU connected the LEDs should be green.It can take several seconds for each CATV connection for the LEDs to display properly.NOTE: Refer to Section 9 for troubleshooting using the LEDs.
Replacing a Fusion Wideband Main Hub8-4 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-x620616-0-20 Rev A8.3 Replacing a Fusion Wideband Main HubYou must record the system configuration settings from the old Fusion Wideband Main Hub’s memory before replacing the unit. You will program the new Main Hub with this information. If the Main Hub is programmed incorrectly, the system will not work. If the Hub to be replaced is not functioning and you cannot use AdminBrowser, get the configuration settings from the As-Built Document that was created as part of the original installation.Replacing a Fusion Wideband Main Hub1. Using AdminBrowser, log in, click SYSTEM INFORMATION, click SHOW SYSTEM TREE, select Fusion Wideband Hub, click GET SYSTEM INFORMATION.2. Turn off the power to the Fusion Wideband Main Hub.3. Disconnect all cables and the AC power cord.4. Replace the Main Hub with a new one.5. Connect the AC power cord and all cables.6. Connect the crossover Ethernet cable to the PC and then to the Main Hub’s front panel 100Base-T connector. ADMIN/LAN port)7. Start the standard browser on the PC to communicate with AdminBrowser soft-ware.8. Turn on the power to the Main Hub.9. Observe the LEDs after turning on the power.All the LEDs blink during the initial power up sequence. All LEDs should turn green after the power on sequence is complete. Power up sequence takes between 1 and 2 minutes depending on the number of RAUs.Configure the New Fusion Wideband Main Hub1. Using AdminBrowser and log in to the Main Hub.2. Click SYSTEM CONFIGURATION.3. Click SET DATE/TIME and enter the current date and time. 4. Click SET DATE/TIME.5. Follow the instructions to eventually reboot the system to set the date and time.6. Using AdminBrowser, log in and click SYSTEM CONFIGURATION.7. Click INSTALL SYSTEM. 8. Set the new Main Hub parameters from the old Main Hub and click INSTALL SYS-TEM (that is, uplink and downlink gain, system labels, and so on).9. Follow the instructions to perform a System Test.
Help Hot Line (U.S. only): 1-800-530-9960 8-5D-x620616-0-20 Rev A CONFIDENTIALReplacing a Fusion Wideband Main Hub10. Click SYSTEM CONFIGURATION and click on SETUP NETWORK CONNECTION OR MODEM CONNECTION if the Main Hub has Network or Modem equipment con-nected to it.During System Test, the entire system is temporarily off-line and no RF is being transmitted. Checking the Main Hub’s LEDs• The LEDs should blink through a 5-second test on power up.• If the LEDs do not blink on power up, replace the Main Hub.• If the LEDs do not illuminate at all, make sure the AC power cable is con-nected.• For each fiber optic port that has a connected Expansion Hub, which has been pro-grammed with a band, the PORT LED should be green.• Refer to Section 9.3, “Troubleshooting,” on page 9-3 for more LED states.NOTE: If there is no communication between the Main Hub and the Expansion Hubs, use the AdminBrowser to isolate system problems.
Replacing a Fusion Wideband Main Hub8-6 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-x620616-0-20 Rev A
InterReach Fusion Wideband Installation, Operation, and Reference Manual 9-1D-620616-0-20 Rev A CONFIDENTIALSECTION 9 Maintenance, Troubleshooting, and Technical AssistanceThis section contains the following subsections:• Section 9.1 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1• Section 9.2 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2• Section 9.3 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3• Section 9.4 Troubleshooting CATV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10• Section 9.5 Technical Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-109.1 ServiceThere are no user-serviceable parts in any of the Fusion Wideband components. Faulty or failed components are fully replaceable through LGC Wireless. All units should be replaced and returned to the factory for service if needed.Address 2540 Junction AvenueSan Jose, California95134-1902 USAPhone 1-408-952-2400Fax 1-408-952-2410Help Hot Line 1-800-530-9960 (U.S. only)+1-408-952-2400 (International)Web Address http://www.lgcwireless.come-mail lgccustomersupport@lgcwireless.com
Maintenance9-2 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A9.2 MaintenanceKeep the fiber ports clean and free of dust. No other periodic maintenance of the Fusion Wideband equipment is required.To clean the fiber ports:You can clean the Hub’s fiber ports using canned compressed air or isopropyl alcohol and cotton swabs.Considerations:• If you use compressed air:• The air must be free of dust, water, and oil.• Hold the can level during use.• If using isopropyl alcohol and foam-tipped swab:• Use only 98% pure or more alcohol.Procedure using compressed air:1. Remove the connector’s dust cap.2. Spray the compressed air away from the unit for a few seconds to clean out the nozzle and then blow dust particles out of each fiber port.Procedure using isopropyl alcohol:1. Remove the connector’s dust cap.2. Dip a 2.5mm lint-free, foam-tipped swab in isopropyl alcohol and slowly insert the tip into the connector.3. Gently twist the swab to clean the connector.4. Insert a dry swab to dry the connector.Additionally, you can use compressed air after the alcohol has completely evapo-rated.
Help Hot Line (U.S. only): 1-800-530-9960 9-3D-620616-0-20 Rev A CONFIDENTIALTroubleshooting9.3 TroubleshootingNOTE: Fusion Wideband has no user-serviceable parts. Faulty or failed units are fully replaceable through LGC Wireless.Sources of potential problems include:• Faulty cabling/connector• Malfunction of one or more Fusion Wideband components• Antenna, base station, or repeater problem• External RF interface• Tripped circuit breaker• Equipment is not grounded• Using an Ethernet crossover cable that does not support full hardware handshaking when using AdminBrowserNOTE: Faulty cabling is the cause of a vast majority of problems. All CATV 75 Ohm cable should be tested to TIA-570-B specifications. The RAU will be damaged if the cable connector is not installed properly.You must use AdminBrowser for troubleshooting the system, use the LEDs only as backup or for confirmation. If you cannot determine the cause of a problem after following the recommended pro-cedures, call LGC Wireless customer help hot line:1-800-530-9960 (U.S. only)+1-408-952-2400 (International)Or, email us at lgccustomersupport@lgcwireless.com.Please provide the following information:• Serial number of the unit• Description of the problem• Using AdminBrowser 1.00, access Special Features, then the Get Service Information window. Save and email this file to LGC Wireless.• What is the length of the CATV cable? What type is it (for example RG-6)?• Status of the LEDs on the unit• Was the unit power cycled?
Troubleshooting9-4 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A9.3.1 Troubleshooting Using AdminBrowserUse AdminBrowser software to determine the current faults and warnings for all of the units in the system. To troubleshoot, start with the Fusion Wideband Main Hub’s faults AND warnings, then proceed to each of the Expansion Hubs, finishing with each of the RAUs.NOTE: AdminBrowser v1.00 displays events (faults, warnings, or status messages) depending on your view preference. To change your view prefer-ence, refer to Section 3.3.2, “View Preference,” on page 3-10.System TroubleshootingUsing AdminBrowser, click SYSTEM INFORMATION, then click GET FAULTS, WARNINGS AND STATUSES. This gives the present status of the system, depending upon View Preferences for all components.Faults usually impact service; warnings may impact service; status messages contain information that should not be ignored, but indicate conditions that do not generally impact service.NOTE: System commands can take longer to execute compared to compo-nent commands.NOTE: This RAU icon indicates there is fault on the RAU. This icon indicates a disconnected device. You cannot request status on a discon-nected device.9.3.1.1 Troubleshooting RecommendationsSome actions that you can take, depending on the device fault or warning include, are as follows:a. Hardware faults on Expansion Hub. – Try swapping fiber with another Expansion Hub at the Main Hub. – Try cleaning the fiber and the fiber ports with alcohol foam tip swab and compressed air. See Section , “To clean the fiber ports:,” on page -2.– Power cycle the Expansion Hub.
Help Hot Line (U.S. only): 1-800-530-9960 9-5D-620616-0-20 Rev A CONFIDENTIALTroubleshootingb. Under Alarms, click CLEAR ALL DISCONNECTS at the Fusion Wideband Main Hub.c. Power cycle the Fusion Wideband Main Hub.d. RAU hardware faults. Try moving a working CATV to the suspect port and verifying that the RAU comes up OK.e. Try isolating the system components:– Check to see if the whole system is effected or a portion of the system.– If the whole system is effected, disconnect the DAS system from the RF source and see if the RF source is working.– Continue to isolate by disabling portions of the system. Under System Con-figuration, click SHOW SYSTEM TREE and select a component. Then click SET OUT OF SERVICE/SET IN SERVICE.9.3.1.2 Fault/Warning/Status IndicationsOnce all of the units are powered on and the cable connections are made, the faults from each unit can be requested using AdminBrowser. Start with the Fusion Wide-band Main Hub and work downstream.Resolve all faults first and then check the warnings. Take appropriate action to resolve the faults, as indicated in the following tables. In cases where there is more than one possible cause, they are listed from the “most likely” to the “least likely” cause. Actions are listed in the order that they should be performed; not all actions may need to be done.NOTE: If you have a red STATUS LED without a fault message, it probably indicates that the unit is locked out.Refer to Appendix C for tables containing Fault, Warning, and Status messages and their meanings.9.3.2 Troubleshooting Using LEDsThe following troubleshooting guide is from the perspective that all Fusion Wideband equipment is installed, their cables are connected, and they are powered on; it is assumed that the system was operating normally before the problem to be diagnosed occurred. Always use AdminBrowser, if possible, to troubleshoot the system. The Fusion Wide-band Main Hub and Expansion Hub LEDs are for backup troubleshooting. The RAU LEDs probably will not provide additional information for troubleshooting.
Troubleshooting9-6 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A9.3.2.1 Troubleshooting Main Hub LEDs During Normal OperationAll of the Main Hub’s LEDs should be green during normal operation. If any LEDs are red, get status using AdminBrowser to determine the exact cause and recommen-dations.Table 9-1 Troubleshooting Main Hub Port LEDs During Normal OperationDuringNormal Operation Main Hub Port LEDs State Action ImpactExpansion Hub Not ConnectedPORT Red If the Expansion Hub was discon-nected accidentally, re-connect the cables. The LEDs should change to Green/Red (then Green/Green, after 20 seconds, if the Main Hub band has been programmed).When the Expansion Hub is to be removed from service permanently, use AdminBrowser’s ‘Clear All Dis-connect Status’ command to clear all disconnect states to no connect states. The Expansion Hub was previously connected, but it is not currently con-nected; the Expansion Hub uplink cable disconnected.AdminBrowser clears all disconnects caused by installation as part of the clean-up process. After installation, power cycle the Main Hub or use AdminBrowser’s “Clear All Discon-nect Status” command.Changes the Main Hub’s port LEDs to Off/Off.Expansion Hub ConnectedPORT Flashing Red (60 ppm)Use AdminBrowser to determine the exact cause of the Main Hub’s faults. Lost communication with Expansion Hub; could be Expansion Hub problem or fiber cable problem.The Expansion Hub communication problems delay MH responses to AdminBrowser commands, resulting in command time-outs. You can discon-nect the offending Expansion Hub ini-tially to obtain status from the rest of the system, then connect the Expansion Hub and resolve the communication problem.PORT Red The Expansion Hub or connected RAU reports a fault condition; use AdminBrowser to determine the exact cause of the Expansion Hub and RAU’s faults.Degraded performance or unit may be off-line.Depends on fault condition.
Help Hot Line (U.S. only): 1-800-530-9960 9-7D-620616-0-20 Rev A CONFIDENTIALTroubleshootingTable 9-2 Troubleshooting Main Hub Status LEDs During Normal OperationDuringNormal OperationMain Hub Status LEDs State Action ImpactAt Any TimeMAIN HUB STATUS Red Use AdminBrowser to determine the exact cause of the fault.Power cycle one time. If the fault remains, replace the Main Hub.Internal Main Hub fault.Use AdminBrowser to check if the Main Hub is commanded Out-of-Service (every Expansion Hub port status LED will be red as well). A power cycle will not clear a com-manded Out-of-Service, you must use AdminBrowser to clear this state.The Main Hub and all downstream units are off-line.MAIN HUB STATUS Flashing Red (60ppm)Reduce input signal power. Signal compression.At Any TimePOWER Red Replace the Main Hub. One or more power supplies are out of specification.
Troubleshooting9-8 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A9.3.2.2 Troubleshooting Expansion Hub LEDs During Normal Operation• All of the Expansion Hub LINK and E-HUB/RAU LEDs that have RAUs connected should be Green/Green, indicating that the RAU is powered on, communication is established, and operation is normal.• The POWER, EHUB STATUS, DL STATUS, and UL STATUS LEDs should all be Green.Table 9-3 Troubleshooting Expansion Hub Port LEDs During Normal OperationDuringNormal OperationExpansion Hub Port LEDs State Action ImpactRAU is not connectedPORT Off If the RAU was disconnected acci-dentally, re-connect the CATV cable. The Expansion Hub’s port LEDs should change to Green/Red (then Green/Green, after 20 sec-onds, if the Main Hub is connected, powered on, and has band pro-grammed).Use AdminBrowser’s “Clear All Disconnect Status” command if you are permanently removing the RAU from service. The Expansion Hub’s port LEDs should change to Off/Off.The RAU was previously connected, but it is not currently connected; the RAU cable is disconnected.RAU is connectedPORT Red Disconnect/reconnect the CATV cable to force power-on reset to the RAU. If the port LEDs remain Red check for the exact cause of Expan-sion Hub faults using Admin-Browser.Lost communications with the RAU. The RAU could have powered down due to over current; cable could have been damaged.PORT Flashing Red (60 ppm)The RAU reports a fault condition; check for the exact cause of Expan-sion Hub and RAU faults using AdminBrowser.Depends on the fault condition.PORT Flashing Red (60 ppm)The Expansion Hub reports no con-nection, cable shorts, or a current port trap condition.Expansion Hub communications with the RAU. The Expansion Hub is at fault. The cable could have been dam-aged. The cable leads may be shorted.
Help Hot Line (U.S. only): 1-800-530-9960 9-9D-620616-0-20 Rev A CONFIDENTIALTroubleshootingTable 9-4 Troubleshooting Expansion Hub Status LEDs During Normal OperationDuringNormal OperationExpansion Hub Status LEDs State Action ImpactAt Any Time UL STATUS Red Check uplink fiber for optical loss.Power cycle Expansion Hub one time to check uplink laser.No communications between the Main Hub and the Expansion Hub.Uplink laser failure.DL STATUS Red Check the downlink fiber for opti-cal loss No communications with the Main Hub.E-H STATUS Red If either the UL STATUS or the DL STATUS are also red, see above.Cycle power on the Expansion Hub. If fault remains, replace the Expansion Hub.Internal Expansion Hub fault (including either of the above UL STATUS or DL STATUS states).
Troubleshooting CATV9-10 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A9.4 Troubleshooting CATVThe following table summarizes CATV problems, as reported by AdminBrowser if a cable is cut or miswired.NOTE: Recommended minimum and maximum CATV cable lengths vary depending upon the type of CATV cable used. Refer to Section 6.1.2, “Cable and Connector Requirements,” on page 6-2.9.5 Technical AssistanceCall our help hot line for technical assistance:1-800-530-9960 (U.S. only)+1-408-952-2400 (International)lgccustomersupport@lgcwireless.comLeave your name and phone number and an LGC Wireless customer service repre-sentative will return your call within an hour. Be prepared to provide the following information when you receive the return call:• Company name• End user name• Type of system, model number, frequency• Approximate time in service (warranty), sales order number• Description of problem• LED status• AdminBrowser faults, warnings, and status messagesTable 9-5 Summary of CATV Cable Wiring ProblemsProblem Type Message Icon ImpactLoose connec-tor, shorted con-ductor or improper con-nection to the shield.None High phase noise, degraded signal on both Downlink and Uplink (high bit error rate)• No communication with RAUn RAU unable to communicate with Hub, degraded performance or RAU off-line• Portn UL RF path loss is too high Increased ripple in the uplink path, decreased UL gain, or no UL gain• The DL RF path loss is too high Increased ripple in the downlink path, RAU off-line•RAUn over current or port short RAU will not power on.
InterReach Fusion Wideband Installation, Operation, and Reference Manual A-1D-620616-0-20 Rev A CONFIDENTIALAPPENDIX A Cables and ConnectorsA.1 75 Ohm CATV Cable• Connects the Expansion Hub to the RAU(s)• Transmits multiband (downlink) and receives (uplink) IF signals• Delivers DC electrical power to the RAUs. The Fusion Wideband Hub’s DC volt-age output is 54V DC nominal. A current limiting circuit is used to protect the Hub if it reaches its current limit• Carries configuration and status information• Use 75 Ohm type-F connectors with captive centerpins• Lengths:RG-59:• Minimum: 0 meters (0 ft.)• Maximum: 130 meters (426 ft.)RG-6:• Minimum: 0 meters (0 ft.)• Maximum: 140 meters (459 ft.)RG-11:• Minimum: 0 meters (0 ft.)• Maximum: 235 meters (771 ft.)Recommended minimum and maximum CATV cable lengths vary depending upon which CATV cable you use.Be sure to test cable termination before installing the cable.CommScope CATV cable or equivalent is required: CommScope 20655V for RG-59. This cable is illustrated in Figure A-1.CommScope 2279V for RG-6. This cable is illustrated in Figure A-2.CommScope 2293K for RG-11.This cable is illustrated in Figure A-3.
A-2 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AFigure A-1 CommScope 2065V for RG-59
Help Hot Line (U.S. only): 1-800-530-9960 A-3D-620616-0-20 Rev A CONFIDENTIALFigure A-2 CommScope 2279V for RG-6
A-4 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AFigure A-3 CommScope 2293K for RG-11NOTE: LGC Wireless requires solid copper center conductor CATV cable for proper DC voltage to the RAU and maximum distances.
Help Hot Line (U.S. only): 1-800-530-9960 A-5D-620616-0-20 Rev A CONFIDENTIALUse the following connectors and tools to prepare the cable ends:CommScope cable part number: 2065VCanare part number: F connector FP-C4FCrimp Tool TC-1, Crimp Die TCD-4C, Cable Strip preparation tool TS100ECommScope cable part number: 2279VCanare part number: F connector FP-C55ACrimp Tool TC-1, Crimp Die TCD-35CA, Cable Strip preparation tool TS100ECommScope cable part number: 2293VCanare part number: F connector FP-C71ACrimp Tool TC-1, Crimp Die TCD-7CA, Cable Strip preparation tool TS100EIf the maximum distance is not required, then copper-clad over steel-center conductor cable may be used to reduce cable costs.Table A-2 shows CommScope cable choices of plenum, non-plenum, solid copper conductor, and copper-clad over-steel conductor cable with their part numbers and maximum distances.
A-6 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A* Exceeding the distance of copper-clad cable will result in the attached RAU becoming non-functional. If the distance of a cable run is at its maximum and is of concern, LGC recom-mends the use of solid copper cable to ensure successful operation.A.2 Fiber Optical Cables• Connects the Main Hub to Expansion Hub(s)• Transmits (downlink) and receives (uplink) optical signals• Carries configuration and status information• Use industry-standard 62.5µm/125µm MMF or Corning SMF-28 fiber, or equiva-lent.• SC/APC (angle-polished) connectors are required throughout the fiber network (port-to-port), including fiber distribution panelsTable A-1 System Gain (Loss) Relative to CATV Cable Length Cable TypeComm-Scope Part Number Plenum RatedSolid Copper ConductorCopper Clad ConductorZero-loss RF Maximum Length (meters)Distance Where RF is 10dB Below Input RF (meters)RG-592065V Yes X 130 1802022V Yes X 100 100*5572R No X 95 95*5565 No X 130 180RG-62279V Yes X 140 1902275V Yes X 140 150*5726 No X 140 140*5765 No X 140 190RG-112293K Yes X 235 3202285K Yes X 235 300*5913 No X 235 300*
Help Hot Line (U.S. only): 1-800-530-9960 A-7D-620616-0-20 Rev A CONFIDENTIAL• Distances:• Multi-mode Fiber: up to 500 m (1,640 ft) – 3 dB optical loss maximum• Single-mode Fiber: up to 6 km (19,685 ft) – 3 dB optical loss maximumA.3 Coaxial Cable• Connects a Fusion Wideband Hub to a repeater or base station (N-type connectors)• Connects an RAU to a passive antenna (N-type connectors)A.4 Standard Modem CableThis cable (PN 4028-10) connects a modem to the Fusion Wideband Hub’s front panel serial port.Figure A-1 Standard Modem Cable PinoutDB-9 Connector Pin DB-25 Connector Pin12345678983220764522
A-8 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev AA.5 TCP/IP Cross-over CableA TCP/IP cross-over cable (PN 4069-ADB) is used to connect a standard browser PC to the AdminBrowser with a Fusion Wideband Hub. A cable is included with the Fusion Wideband Hub. The pinouts for this cable are illustrated in Figure A-2.Figure A-2 Wiring Map for TCP/IP Cable12 3 45 6 78BrownBrown/WhiteBlue Blue/WhiteGreen/WhiteGreen OrangeOrange/WhiteRJ-45 Port12345678W-GGW-OBLW-BLOW-BRBRRJ-45 Port12345678W-OOW-GBLW-BLGW-BRBR361452 78Connector 1Connector 2(586A)(586B)
Help Hot Line (U.S. only): 1-800-530-9960 A-9D-620616-0-20 Rev A CONFIDENTIALA.6 DB-9 to DB-9 Null Modem CableUse a DB-9 female to DB-9 female null modem cable to connect the craft person’s PC/Laptop to the RS-232 port on the front of the Fusion Wideband Hub for IP address configuration. Table A-2 lists the cable pinout and Figure A-3 shows a dia-gram of its wiring.Figure A-3 DB-9 Female to DB-9 Female Null Modem Cable DiagramTable A-2 DB-9 Female to DB-9 Female Null Modem Cable PinoutFrom Signal To SignalP1-4 DTR P2-6, P2-1 DSR, DCD P1-6 DSR P1-1, P2-4 DCD, DTR P1-3 TXD P2-2 RXD P1-2 RXD P2-3 TXD P1-5 GND P2-5 GND P1-7 RTS P2-8 CTS P1-8 CTS P2-7 RTSP1-9 N/C N/C N/CNote that for each DB-9 connector, pins 1 and 6 are tied together and sent to pin 4 of the opposite connector, providing the required handshake signals.DB-9 Connector PinDB-9 Connector Pin123456789123456789
A-10 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A
InterReach Fusion Wideband Installation, Operation, and Reference Manual B-1D-620616-0-20 Rev A CONFIDENTIALAPPENDIX B ComplianceB.1 Fusion Wideband System Approval StatusInterReach Fusion Wideband has been approved as shown below.1800 DCS Products• Safety: UL, CSA, CB Scheme certificate to IEC 60950, 3rd Edition, with all national deviations.• EMC: EN 301 489-8 V.1.2.1 (2002-08)• Radio: EN 301 502 V.8.1.2 (2001-07)2100 UMTS Products• Safety: UL, CSA, CB Scheme certificate to IEC 60950, 3rd Edition, with all national deviations.• EMC: ETSI TS 125 113 125 113 (2005-12)• Radio: EN 301 908-11 V2.3.1 (2004-10)InterReach Fusion Wideband Main Hub and Expansion Hub• Safety: UL, CSA, CB Scheme certificate to IEC 60950-1, First Edition, with all national deviations.• EMC: EN 301 489-8 V.1.2.1 (2002-08)• EMC: ETSI TS 125 113 125 113 (2005-12)• Radio: EN 301 502 V.8.1.2 (2001-07) • Radio: EN 301 908-11 V2.3.1 (2004-10)• EMC: CISPR 22A• EMC: CISPR 24
B-2 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev ANOTE: For Canadian customers, the Manufacturer’s rated output power1 of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the device.NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harm-ful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.B.2 Human Exposure to RFThe U.S. Federal Communications Commission (FCC) has developed guidelines for evaluation of human exposure to RF emissions. The guidelines incorporate limits for Maximum Permissible Exposure (MPE) for power density of transmitters operating at frequencies between 300 kHz and 100 GHz. Limits have been set for portable, mobile, and fixed equipment. LGC products fall in the category of fixed equipment; products intended to be permanently secured and exposures are evaluated for dis-tances greater than 20cm (7 7/8”). Portable devices fall into exposures of less than 20cm, are SAR evaluations are used.Antenna gain is restricted to 1.5 W ERP (2.49 W EIRP) in order to satisfy RF expo-sure compliance requirements. If higher than 1.5 W ERP, routine MPE evaluation is needed. The antennas should be installed to provide at least 20 cm from all persons to satisfy MPE requirements of FCC Part 2, 2.1091.Basic MPE evaluation is performed by taking the maximum power output of the equipment, the gain of the antenna to be used, and distance from the antenna, refer-enced in FCC OET Bulletin 65 “Evaluation Compliance with FCC Guidelines for Human Exposure to Radio Frequency for Electric Fields”.LGC products transmit well below the FCC power density limits. FCC defines power output limitsat 20cm distance for various frequency ranges:• Over 300 mHz to 1.5 GHz the limit is determined by frequency/15001. “Manufacturer’s rated output power” refers to Fusion Wideband’s downlink P1dB. The power per carrier tables take into account this power reduction for multiple carriers.
Help Hot Line (U.S. only): 1-800-530-9960 B-3D-620616-0-20 Rev A CONFIDENTIAL• Above 1.5 GHz the limit is 1mW/cm2The basic equation for determining power density is:S = PG / 4πR2Where S is power density in mW/cm2PG, the transmitted power from the antenna identified as EIRP (Equivalent Isotropi-cally Radiated Power), is the product of power output of device and antenna gain, in mW.R is the distance of interest from the antenna.Typical Installation Example:Assuming an antenna is placed on a 10 foot ceiling, for a person 6 feet tall, the dis-tance from antenna to body is 4 feet (112 cm.).For a PCS 1900 remote unit, the maximum power output, according to the power table in Section 6.3 Maximum Output Power per Carrier on page 6-4, is 16.5 dB.Assuming a 7 dBi antenna is used, PG in the equation is equal to 23.5 dB (224 mW) EIRP.Using S = PG/4πR2S = 224/(4x3.14) x (122)2 = 0.001 mW/cm2Also, assuming a minimum distance of 20 cm according to FCC regulations”S = 224/(4 x 3.14) x (20)2 = 0.04 mW/cm2
B-4 InterReach Fusion Wideband Installation, Operation, and Reference ManualCONFIDENTIAL D-620616-0-20 Rev A
InterReach Fusion Wideband Installation, Operation, and Referencer Manual C-1D-620616-0-20 Rev A CONFIDENTIALAPPENDIX C Faults, Warnings, Status TablesThis appendix contains the following sections:• Section C.1 Faults Reported by Fusion Wideband Main/SingleStar Hubs . . A-1• Section C.2 Faults Reported for System CPU . . . . . . . . . . . . . . . . . . . . . . . . A-5• Section C.3 Faults for Fusion Wideband Expansion Hubs . . . . . . . . . . . . . . A-6• Section C.4 Faults for RAUs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8• Section C.5 Warning/Status Messages for Fusion Wideband Main/SingleStar Hubs A-10• Section C.6 Warning/Status Messages for System CPUs . . . . . . . . . . . . . . A-15• Section C.7 Warning/Status Messages for Fusion Expansion Hubs . . . . . . A-16• Section C.8 Warning /Status Messages for RAUs . . . . . . . . . . . . . . . . . . . . A-19The following tables contain messages for all versions of firmware, but all messages are not displayed by a given firmware version.C.1 Faults Reported by Fusion Wideband Main/SingleStar HubsFaults indicate service-impacting conditions and should be given immediate atten-tion.Once all of the units are powered on and the cable connections are made, the faults from each unit can be requested using AdminBrowser. Start with the Fusion Wide-band Main Hub and work downstream.Resolve all faults first and then check the warnings. Take appropriate action to resolve the faults, as indicated in the following tables. In cases where there is more than one possible cause, they are listed from the “most likely” to the “least likely”
C-2 InterReach Fusion Wideband Installation, Operation, and Referencer ManualCONFIDENTIAL D-620616-0-20 Rev Acause. Actions are listed in the order that they should be performed; not all actions may need to be done.NOTE: If you have a red STATUS LED without a fault message, it probably indicates that the unit is locked out.Table C-1 Fault Messages for Fusion Wideband Main/SingleStar Hubs Message Number Description Reason/Action{MF01} Software error occurred and recovered. If this happens repeatedly, replace the Hub.{MF02} Software error occurred and recovered. If this happens repeatedly, replace the Hub.{MF03} Software error occurred and recovered. If this happens repeatedly, replace the Hub.{MF04} Software reset occurred and recovered, or firmware download. If this happens repeatedly, replace the Hub.{MF05} Software error occurred and recovered. If this happens repeatedly, replace the Hub.{MF06} Problem detected in the Hub. Internal communication reset. Contact LGC Wireless Support for more information.{MF07} Hub power cycle. Hub power cycle.{MF08} Internal communications failure. No internal communications in preceding 15 minutes.{MF09} Hardware Reset. Commanded hardware power on reset{MF10} Band not programmed. Use AdminBrowser to program the band.{MF11} Hardware failure (DL Pilot PLL). Cycle power once. If fault persists, replace the Hub{MF12} Hardware failure (DL Pilot Too High). Cycle power once. If fault persists, replace the Hub.{MF13} Hardware failure (DL Pilot Too Low). Cycle power once. If fault persists, replace the Hub.{MF14} Hardware failure (54 VDC). 54 VDC power supply is out of range, replace the Hub{MF15} Hardware failure (RF VDC Power). Loss of DC power to RF circuits, replace the Hub.{MF16} Self Lockout (All Bands). Hub has shutdown the system due to an internal fault. System is offline.{MF17} Hardware failure (DL PLL Band 1). Cycle power once. If fault persists, replace the Hub.{MF18} Hardware failure (UL PLL Band 1). Cycle power once. If fault persists, replace the Hub{MF19} Commanded Out-of-service (Band 1). Band 1 commanded out-of-service by User.{MF20} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF21} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF22} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF23} Problem detected in the Hub Contact LGC Wireless Support for more information.{MF24} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF25} Hardware failure (DL PLL Band 2). Cycle power once. If fault persists, replace the Hub.{MF26} Hardware failure (UL PLL Band 2). Cycle power once. If fault persists, replace the Hub.{MF27} Commanded Out-of-service (Band 2). Band 2 commanded out-of-service by User.{MF28} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF29} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF30} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF31} Problem detected in the Hub. Contact LGC Wireless Support for more information.
Help Hot Line (U.S. only): 1-800-530-9960 C-3D-620616-0-20 Rev A CONFIDENTIAL{MF32} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF36} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF37} Problem detected in the Hub Contact LGC Wireless Support for more information.{MF38} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF39} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF40} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF41} Hardware failure (Optical Power Out). Cycle power once. If the fault persists, replace the Hub.{MF42} Problem detected in the Hub Contact LGC Wireless Support for more information.{MF43} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF44} Problem detected in the Hub. Contact LGC Wireless Support for more information{MF45} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF46} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF47} Problem detected in the Hub Contact LGC Wireless Support for more information.{MF48} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MD129} Port 1 Disconnected. Unit is disconnected.{MD130} Port 2 Disconnected. Unit is disconnected.{MD131} Port 3 Disconnected. Unit is disconnected.{MD132} Port 4 Disconnected. Unit is disconnected.{MD133} Port 5 Disconnected. Unit is disconnected.{MD134} Port 6 Disconnected. Unit is disconnected.{MD135} Port 7 Disconnected. Unit is disconnected.{MD136} Port 8 Disconnected. Unit is disconnected.{MC137} Port 1 No Communications. No communications with remote unit.{MC138} Port 2 No Communications. No communications with remote unit.{MC139} Port 3 No Communications. No communications with remote unit.{MC140} Port 4 No Communications. No communications with remote unit.{MC141} Port 5 No Communications. No communications with remote unit.{MC142} Port 6 No Communications. No communications with remote unit.{MC143} Port 7 No Communications. No communications with remote unit.{MC144} Port 8 No Communications. No communications with remote unit.{MT145} Port 1 Cable Fault. Possible electrical short in the coax cable, or RAU problem.{MT146} Port 2 Cable Fault. Possible electrical short in the coax cable, or RAU problem.{MT147} Port 3 Cable Fault. Possible electrical short in the coax cable, or RAU problem.{MT148} Port 4 Cable Fault. Possible electrical short in the coax cable, or RAU problem.{MT149} Port 5 Cable Fault. Possible electrical short in the coax cable, or RAU problem.{MT150} Port 6 Cable Fault. Possible electrical short in the coax cable, or RAU problem.Table C-1 Fault Messages for Fusion Wideband Main/SingleStar Hubs Message Number Description Reason/Action
C-4 InterReach Fusion Wideband Installation, Operation, and Referencer ManualCONFIDENTIAL D-620616-0-20 Rev A{MT151} Port 7 Cable Fault. Possible electrical short in the coax cable, or RAU problem.{MT152} Port 8 Cable Fault. Possible electrical short in the coax cable, or RAU problem.{MT153} Port 1 Trip. Remote Unit is drawing too much current.{MT154} Port 2 Trip. Remote Unit is drawing too much current.{MT155} Port 3 Trip. Remote Unit is drawing too much current.{MT156} Port 4 Trip. Remote Unit is drawing too much current.{MT157} Port 5 Trip. Remote Unit is drawing too much current.{MT158} Port 6 Trip. Remote Unit is drawing too much current.{MT159} Port 7 Trip. Remote Unit is drawing too much current.{MT160} Port 8 Trip. Remote Unit is drawing too much current.{MF161} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF162} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF163} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF164} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF165} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF166} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF167} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF168} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF169} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF170} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF171} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF172} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF173} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF174} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF175} Problem detected in the Hub. Contact LGC Wireless Support for more information.{MF176} Problem detected in the Hub. Contact LGC Wireless Support for more information.Table C-1 Fault Messages for Fusion Wideband Main/SingleStar Hubs Message Number Description Reason/Action
Help Hot Line (U.S. only): 1-800-530-9960 C-5D-620616-0-20 Rev A CONFIDENTIALC.2 Faults Reported for System CPUTable C-2 Faults for System CPUMessage Number Description Reason/Action{SF01} No internal communications. No internal communications in preceding 2 minutes. Power cycle to clear.{SF02} Problem detected in the system CPU. System CPU performed self reboot to clear.{SF03} Problem detected in the system CPU. System CPU performed self reboot to clear.{SF04} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF05} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF06} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF07} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF08} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF09} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF10} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF11} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF12} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF13} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF14} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF15} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF16} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF17} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF18} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF19} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF20} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF21} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF22} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF23} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF24} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF25} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF26} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF27} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF28} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF29} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF30} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF31} Problem detected in the system CPU. Contact LGC Wireless Support for more information.{SF32} Problem detected in the system CPU. Contact LGC Wireless Support for more information.
C-6 InterReach Fusion Wideband Installation, Operation, and Referencer ManualCONFIDENTIAL D-620616-0-20 Rev AC.3 Faults for Fusion Wideband Expansion HubsTable C-3 Fault Messages for Fusion Wideband Expansion Hubs Message Number Description Reason/Action{EF01} Software error occurred and recovered. If this happens repeatedly, replace the Hub.{EF02} Software reset occurred and recovered, or firm-ware download.If this happens repeatedly, replace the Hub.{EF03} Software reset occurred and recovered. If this happens repeatedly, replace the Hub.{EF04} Software reset occurred and recovered. If this happens repeatedly, replace the Hub.{EF05} Software error occurred and recovered. If this happens repeatedly, replace the Hub.{EF06} Firmware download. Firmware download.{EF07} Hub power cycle. Hub power cycle.{EF08} MH communications fail-ure. No communications from MH in THE preceding 90 seconds.{EF09} MH communications fail-ure. EH uplink messages not getting to the MH.{EF10} Hardware failure (PLL). Cycle power once. If the fault persists, replace the Hub.{EF11} Hardware failure (54 VDC). 54 VDC power supply is out of range, replace the Hub.{EF12} Problem detected in the EH. Contact LGC Wireless Support for more information.{EF13} Band not programmed. Cycle power once. If the fault persists, replace the Hub.{EF14} Low optical input power. Check downlink fiber connections.{EF15} Hardware failure (Optical Output Power). Cycle power once. If the fault persists, replace the Hub.{EF16} Self Lockout (All Bands). The Hub has shutdown the system due to an internal fault. The sys-tem is offline.{EF17} Commanded Out-of-ser-vice (Band 1). Band 1 commanded out-of-service by the user.{EF18} Fault lockout (Band 1). Band 1 out-of-service due to an MH fault.{EF19} Problem detected in the EH. Contact LGC Wireless Support for more information.{EF20} Problem detected in the EH. Contact LGC Wireless Support for more information.{EF21} Problem detected in the EH. Contact LGC Wireless Support for more information.{EF22} Problem detected in the EH. Contact LGC Wireless Support for more information.{EF23} Problem detected in the EH. Contact LGC Wireless Support for more information.{EF24} Problem detected in the EH. Contact LGC Wireless Support for more information.{EF25} Commanded Out-of-ser-vice (Band 2). Band 2 commanded out-of-service by the user.
Help Hot Line (U.S. only): 1-800-530-9960 C-7D-620616-0-20 Rev A CONFIDENTIAL{EF26} Fault lockout (Band 2). Band 2 out-of-service due to MH fault.{EF27} Problem detected in the EH. Contact LGC Wireless Support for more information.{EF28} Problem detected in the EH. Contact LGC Wireless Support for more information.{EF29} Problem detected in the EH. Contact LGC Wireless Support for more information.{EF30} Problem detected in the EH. Contact LGC Wireless Support for more information.{EF31} Problem detected in the EH. Contact LGC Wireless Support for more information.{EF32} Problem detected in the EH. Contact LGC Wireless Support for more information.{EF35} Problem detected in the EH. Contact LGC Wireless Support for more information.{EF36} Problem detected in the EH. Contact LGC Wireless Support for more information.{EF37} Problem detected in the EH. Contact LGC Wireless Support for more information.{EF38} Problem detected in the EH. Contact LGC Wireless Support for more information.{EF39} Problem detected in the EH. Contact LGC Wireless Support for more information.{EF40} Problem detected in the EH. Contact LGC Wireless Support for more information.{ED129} Port 1 Disconnected. Unit is disconnected.{ED130} Port 2 Disconnected. Unit is disconnected.{ED131} Port 3 Disconnected. Unit is disconnected.{ED132} Port 4 Disconnected. Unit is disconnected.{ED133} Port 5 Disconnected. Unit is disconnected.{ED134} Port 6 Disconnected. Unit is disconnected.{ED135} Port 7 Disconnected. Unit is disconnected.{ED136} Port 8 Disconnected. Unit is disconnected.{EC137} Port 1 No Communica-tions. No communications with remote unit.{EC138} Port 2 No Communica-tions. No communications with remote unit.{EC139} Port 3 No Communica-tions. No communications with remote unit.{EC140} Port 4 No Communica-tions. No communications with remote unit.{EC141} Port 5 No Communica-tions. No communications with remote unit.{EC142} Port 6 No Communica-tions. No communications with remote unit.{EC143} Port 7 No Communica-tions. No communications with remote unit.Table C-3 Fault Messages for Fusion Wideband Expansion Hubs (continued)Message Number Description Reason/Action
C-8 InterReach Fusion Wideband Installation, Operation, and Referencer ManualCONFIDENTIAL D-620616-0-20 Rev AC.4 Faults for RAUs{EC144} Port 8 No Communica-tions. No communications with remote unit.{ET145} Port 1 Cable Fault. Possible electrical short in the coaxial cable, or an RAU problem.{ET146} Port 2 Cable Fault. Possible electrical short in the coaxial cable, or an RAU problem.{ET147} Port 3 Cable Fault. Possible electrical short in the coaxial cable, or an RAU problem.{ET148} Port 4 Cable Fault. Possible electrical short in the coaxial cable, or an RAU problem.{ET149} Port 5 Cable Fault. Possible electrical short in the coaxial cable, or an RAU problem.{ET150} Port 6 Cable Fault. Possible electrical short in the coaxial cable, or an RAU problem.{ET151} Port 7 Cable Fault. Possible electrical short in the coaxial cable, or an RAU problem.{ET152} Port 8 Cable Fault. Possible electrical short in the coaxial cable, or an RAU problem.{ET153} Port 1 Trip. The Remote Unit is drawing too much current.{ET154} Port 2 Trip. The Remote Unit is drawing too much current.{ET155} Port 3 Trip. The Remote Unit is drawing too much current.{ET156} Port 4 Trip. The Remote Unit is drawing too much current.{ET157} Port 5 Trip. The Remote Unit is drawing too much current.{ET158} Port 6 Trip. The Remote Unit is drawing too much current.{ET159} Port 7 Trip. The Remote Unit is drawing too much current.{ET160} Port 8 Trip. The Remote Unit is drawing too much current.Table C-4 Faults for RAUsMessage Number Description Reason/Action{RF01} Software error occurred and recovered. If this happens repeatedly, replace the RAU.{RF02} Software error occurred and recovered. If this happens repeatedly, replace the RAU.{RF03} Software error occurred and recovered. If this happens repeatedly, replace the RAU.{RF04} Software reset occurred and recovered, or firmware download. If this happens repeatedly, replace the RAU.{RF05} Software error occurred and recovered. If this happens repeatedly, replace the RAU.{RF06} Problem detected in the RAU. Contact LGC Wireless Support for more information.{RF07} RAU power cycle. RAU power cycle.{RF08} Problem detected in the RAU. Contact LGC Wireless Support for more information.{RF09} Invalid band. The RAU doesn't support programmed band. Check the RAU type against the band programmed in the hub.Table C-3 Fault Messages for Fusion Wideband Expansion Hubs (continued)Message Number Description Reason/Action
Help Hot Line (U.S. only): 1-800-530-9960 C-9D-620616-0-20 Rev A CONFIDENTIAL{RF10} Low input DC voltage. Check the coaxial cable for high RF loss. Try another Hub port. If the fault persists, replace the RAU. If the fault clears, mark the Hub port as unusable and replace the Hub when possible.{RF11} Hardware Failure (DL PLL Band 1). Cycle power once. If the fault persists, replace the RAU.{RF12} Hardware Failure (DL PLL Band 2). Cycle power once. If the fault persists, replace the RAU.{RF14} Hardware Failure (UL PLL Band 1). Cycle power once. If the fault persists, replace the RAU.{RF15} Hardware Failure (UL PLL Band 2). Cycle power once. If the fault persists, replace the RAU.{RF17} Hardware Failure (PA Band 1). Cycle power once. If the fault persists, replace the RAU.{RF18} Hardware Failure (PA Band 2). Cycle power once. If the fault persists, replace the RAU.{RF20} Hardware Failure (UL Pilot). Cycle power once. If the fault persists, replace the RAU.{RL21} Commanded Out-of-service (Band 1). Band 1 commanded out-of-service by User. Command In-Service on Band 1 to restore service.{RL22} Commanded Out-of-service (Band 2). Band 2 commanded out-of-service by User. Command In-Service on Band 2 to restore service.{RF24} Problem detected in the RAU. Contact LGC Wireless Support for more information.{RX25} Commanded shutdown (Band 1). Check the status of hub to which the RAU is connected.{RX26} Commanded shutdown (Band 2). Check the status of hub to which the RAU is connected.{RF28} Internal shutdown (Band 1). RAU Fault condition in band 1 path (or common path).{RF29} Internal shutdown (Band 2). RAU Fault condition in band 2 path (or common path).{RF31} Problem detected in the system. Contact LGC Wireless Support for more information.{RF32} Problem detected in the RAU. Contact LGC Wireless Support for more information.Table C-4 Faults for RAUs (continued)Message Number Description Reason/Action
C-10 InterReach Fusion Wideband Installation, Operation, and Referencer ManualCONFIDENTIAL D-620616-0-20 Rev AC.5 Warning/Status Messages for Fusion Wideband Main/SingleStar HubsWarning MessagesWarnings alert you to conditions that indicate possible service impact. Warnings are displayed in the Messages pane in red lettering.Before addressing warnings, ensure that all faults are resolved. Take appropriate action to resolve the warnings, as indicated in the following tables.NOTE: AdminBrowser v0000007 or higher displays events (faults, warn-ings, or status messages) depending on your view preference. To change your view preference, refer to Section 3.3.2, “View Preference,” on page 3-10.Status MessagesStatus messages alert you to conditions that are important, but generally do not impact service. Status messages alert you to conditions that are important, but gener-ally do not impact service. Status messages are displayed in the Messages pane in blue lettering.NOTE: AdminBrowser v0000007 or higher displays events (faults, warn-ings, or status messages) depending on your view preference. To change your view preference, refer to Section 3.3.2, “View Preference,” on page 3-10.NOTE: The icons displayed in the system status tree assume that there are no other faults, warnings, or status present.In Table C-5, the message number is in the following form:[Mnn]/X where nn equals the message number, and X equals the default of either Sta-tus (S) or Warning (W).
Help Hot Line (U.S. only): 1-800-530-9960 C-11D-620616-0-20 Rev A CONFIDENTIALTable C-5 Warnings/Status Messages for Fusion Wideband Main HubsMessage Number/Default Description Reason/Action[M01]/S Fan 1 failure. Check the fan for rotation, air flow blockage, and dust. Replace the Hub on high temperature warning.[M02]/S Fan 2 failure. Check the fan for rotation, air flow blockage, and dust. Replace the Hub on high temperature warning.[M03]/S 54 VDC Pwr Supply Fan failure. Check the fan for rotation, air flow blockage, and dust. Replace the Hub on high temperature warning.[M04]/W 5 VDC Monitor. DC power out of range, replace the Hub.[M05]/W 9 VDC Monitor. DC power out of range, replace the Hub.[M06]/W 54 VDC Monitor. DC power out of range, replace the Hub.[M07]/W 3 VDC Monitor. DC power out of range, replace the Hub.[M08]/W 12 VDC Monitor. DC power out of range, replace the Hub.[M09]/W Temperature High. Reduce ambient temperature, check for air flow blockage, fan rotation.[M10]/W -5 VDC Monitor. DC power is out of range, replace the Hub.[M11]/W High laser current. Output laser failure possible, replace the Hub when possi-ble.[M12]/W DL path loss is too high Replace the Hub.[M13]/S Low input optical (Port 1). Check the uplink fiber.[M14]/S Low input optical (Port 2). Check the uplink fiber.[M15]/S Low input optical (Port 3). Check the uplink fiber.[M16]/S Low input optical (Port 4). Check the uplink fiber.[M17]/S Hardware failure (Test Tone PLL Band 1). Unable to perform DL system test.[M18]/S Hardware failure (Test Tone Too High Band 1). Unable to perform DL system test.[M19]/S Hardware failure (Test Tone Too Low Band 1). Unable to perform DL system test.[M20]/W Overdrive limiter active (Band 1). Reduce input signal power to avoid potential component damage.[M21]/W CEMark limiter at maximum (Band 1). Reduce input signal power to avoid drop in system gain.[M22]/W No DL test tone (Band 1). Hub DL gain is low.[M23]/S No UL test tone (Band 1). Hub UL path gain is low.[M24]/S Problem detected in the system. Contact LGC Wireless Support for more information.[M25]/S Hardware failure (Test Tone PLL Band 2). Unable to perform DL system test. Replace the hub when possible.[M26]/S Hardware failure (Test Tone Too High Band 2). Unable to perform DL system test. Replace the hub when possible.[M27]/S Hardware failure (Test Tone Too Low Band 2). Unable to perform DL system test. Replace the hub when possible.[M28]/W Overdrive limiter active (Band 2). Reduce input signal power to avoid potential component damage.[M29]/W CEMark limiter at maximum (Band 2). Reduce input signal power to avoid drop in system gain.
C-12 InterReach Fusion Wideband Installation, Operation, and Referencer ManualCONFIDENTIAL D-620616-0-20 Rev A[M30]/W No DL test tone (Band 2). Hub DL path gain is low.[M31]/S No UL test tone (Band 2). Hub UL path gain is low.[M32]/S Problem detected in the system. Contact LGC Wireless Support for more information.[M40]/S Problem detected in the Hub. Contact LGC Wireless Support for more information.[M41]/W Port 1 No DL test tone (Band 1). Hub/Port DL path gain is low.[M42]/W Port 2 No DL test tone (Band 1). Hub/Port DL path gain is low.[M43]/W Port 3 No DL test tone (Band 1). Hub/Port DL path gain is low.[M44]/W Port 4 No DL test tone (Band 1). Hub/Port DL path gain is low.[M45]/W Port 5 No DL test tone (Band 1). Hub/Port DL path gain is low.[M46]/W Port 6 No DL test tone (Band 1). Hub/Port DL path gain is low.[M47]/W Port 7 No DL test tone (Band 1). Hub/Port DL path gain is low.[M48]/W Port 8 No DL test tone (Band 1). Hub/Port DL path gain is low.[M49]/W Port 1 No DL test tone (Band 2). Hub/Port DL path gain is low.[M50]/W Port 2 No DL test tone (Band 2). Hub/Port DL path gain is low.[M51]/W Port 3 No DL test tone (Band 2). Hub/Port DL path gain is low.[M52]/W Port 4 No DL test tone (Band 2). Hub/Port DL path gain is low.[M53]/W Port 5 No DL test tone (Band 2). Hub/Port DL path gain is low.[M54]/W Port 6 No DL test tone (Band 2). Hub/Port DL path gain is low.[M55]/W Port 7 No DL test tone (Band 2). Hub/Port DL path gain is low.[M56]/W Port 8 No DL test tone (Band 2). Hub/Port DL path gain is low.[M65]/S No UL test tone (Band 1). Hub/Port UL path gain is low.[M66]/S Problem detected in the Hub. Contact LGC Wireless Support for more information.[M67]/S Problem detected in the Hub. Contact LGC Wireless Support for more information.[M68]/S No UL test tone (Port 4/Band 1). Hub/Port UL path gain is low.[M69]/S No UL test tone (Band 2). Hub/Port UL path gain is low.[M70]/S No UL test tone (Port 2/Band 2). Hub/Port UL path gain is low.[M71]/S No UL test tone (Port 3/Band 2). Hub/Port UL path gain is low.[M72]/S No UL test tone (Port 4/Band 2). Hub/Port UL path gain is low.[M77]/S Problem detected in the Hub. Contact LGC Wireless Support for more information.[M78]/S Problem detected in the Hub. Contact LGC Wireless Support for more information.[M79]/S Problem detected in the Hub. Contact LGC Wireless Support for more information.[M80]/S Problem detected in the Hub. Contact LGC Wireless Support for more information.[M81]/W Port 1 DL path loss is high. If the problem is on more than one port, replace the Hub. Switch the cable connection to a different hub port until the Hub can be replaced.[M82]/W Port 2 DL path loss is high. If the problem is on more than one port, replace the Hub. Switch the cable connection to a different hub port until the Hub can be replaced.[M83]/W Port 3 DL path loss is high. If the problem is on more than one port, replace the Hub. Switch the cable connection to a different hub port until the Hub can be replaced.Table C-5 Warnings/Status Messages for Fusion Wideband Main Hubs Message Number/Default Description Reason/Action
Help Hot Line (U.S. only): 1-800-530-9960 C-13D-620616-0-20 Rev A CONFIDENTIAL[M84]/W Port 4 DL path loss is high. If the problem is on more than one port, replace the Hub. Switch the cable connection to a different hub port until the Hub can be replaced.[M85]/W Port 5 DL path loss is high. If the problem is on more than one port, replace the Hub. Switch the cable connection to a different hub port until the Hub can be replaced.[M86]/W Port 6 DL path loss is high. If the problem is on more than one port, replace the Hub. Switch the cable connection to a different hub port until the Hub can be replaced.[M87]/W Port 7 DL path loss is high. If the problem is on more than one port, replace the Hub. Switch the cable connection to a different hub port until the Hub can be replaced.[M88]/W Port 8 DL path loss is high. If the problem is on more than one port, replace the Hub. Switch the cable connection to a different hub port until the Hub can be replaced.[M89]/W Port 1 UL path loss is high. Check the cable for high RF loss. Switch the cable connec-tion to a different hub port. If the problem on more than one port, replace the Hub, otherwise replace the RAU.[M90]/W Port 2 UL path loss is high. Check the cable for high RF loss. Switch the cable connec-tion to a different hub port. If the problem is on more than one port, replace the Hub, otherwise replace the RAU.[M91]/W Port 3 UL path loss is high. Check the cable for high RF loss. Switch the cable connec-tion to a different hub port. If the problem is on more than one port, replace the Hub, otherwise replace the RAU.[M92]/W Port 4 UL path loss is high. Check the cable for high RF loss. Switch the cable connec-tion to a different hub port. If the problem is on more than one port, replace the Hub, otherwise replace the RAU.[M93]/W Port 5 UL path loss is high. Check the cable for high RF loss. Switch the cable connec-tion to a different hub port. If the problem is on more than one port, replace the Hub, otherwise replace the RAU.[M94]/W Port 6 UL path loss is high. Check the cable for high RF loss. Switch the cable connec-tion to a different hub port. If the problem is on more than one port, replace the Hub, otherwise replace the RAU.[M95]/W Port 7 UL path loss is high. Check the cable for high RF loss. Switch the cable connec-tion to a different hub port. If the problem is on more than one port, replace the Hub, otherwise replace the RAU.[M96]/W Port 8 UL path loss is high. Check the cable for high RF loss. Switch the cable connec-tion to a different hub port. If the problem is on more than one port, replace the Hub, otherwise replace the RAU.[M97]/W Port 1 UL path exceeds maximum gain. If the problem is common to more than one port, replace the Hub, otherwise check the RAU.[M98]/W Port 2 UL path exceeds maximum gain. If the problem is common to more than one port, replace the Hub, otherwise check the RAU.[M99]/W Port 2 UL path exceeds maximum gain. If the problem is common to more than one port, replace the Hub, otherwise check the RAU.[M100]/W Port 2 UL path exceeds maximum gain. If the problem is common to more than one port, replace the Hub, otherwise check the RAU.[M101]/W Port 2 UL path exceeds maximum gain. If the problem is common to more than one port, replace the Hub, otherwise check the RAU.[M102]/W Port 2 UL path exceeds maximum gain. If the problem is common to more than one port, replace the Hub, otherwise check the RAU.Table C-5 Warnings/Status Messages for Fusion Wideband Main Hubs Message Number/Default Description Reason/Action
C-14 InterReach Fusion Wideband Installation, Operation, and Referencer ManualCONFIDENTIAL D-620616-0-20 Rev A[M103]/W Port 2 UL path exceeds maximum gain. If the problem is common to more than one port, replace the Hub, otherwise check the RAU.[M104]/W Port 8 UL path exceeds maximum gain. If the problem is common to more than one port, replace the Hub, otherwise check the RAU.[M105]/W Port 1 54 VDC Power Enabled. Caution: Port 54 VDC power may be present at the output.[M106]/W Port 2 54 VDC Power Enabled. Caution: Port 54 VDC power may be present at the output.[M107]/W Port 3 54 VDC Power Enabled. Caution: Port 54 VDC power may be present at the output.[M108]/W Port 4 54 VDC Power Enabled. Caution: Port 54 VDC power may be present at the output.[M109]/W Port 5 54 VDC Power Enabled. Caution: Port 54 VDC power may be present at the output.[M110]/W Port 6 54 VDC Power Enabled. Caution: Port 54 VDC power may be present at the output.[M111]/W Port 7 54 VDC Power Enabled. Caution: Port 54 VDC power may be present at the output.[M112]/W Port 8 54 VDC Power Enabled. Caution: Port 54 VDC power may be present at the output.Table C-5 Warnings/Status Messages for Fusion Wideband Main Hubs Message Number/Default Description Reason/Action
Help Hot Line (U.S. only): 1-800-530-9960 C-15D-620616-0-20 Rev A CONFIDENTIALC.6 Warning/Status Messages for System CPUsIn Table C-6, the message number is in the following form:[Snn]/X where nn equals the message number, and X equals the default of either Sta-tus (S) or Warning (W).Table C-6 Warning/Status Messages for System CPUsMessage Number/Default Description Reason/Action[S01]/W Alarm Input 1. Check equipment connected to alarm input 1.[S02]/W Alarm Input 2. Check equipment connected to alarm input 2.[S03]/W Alarm Input 3. Check equipment connected to alarm input 3.[S04]/S Problem detected in the system CPU. Retrieve the TTL and erase.[S05]/S Problem detected in the system CPU. Contact LGC Wireless Support for more information.[S06]/S Problem detected in the system CPU. Contact LGC Wireless Support for more information.[S07]/S Problem detected in the system CPU. Contact LGC Wireless Support for more information.[S08]/S Problem detected in the system CPU. Contact LGC Wireless Support for more information.[S09]/S Time-tagged Log is full. Retrieve the TTL and erase.[S10]/S Problem detected in the system CPU. Contact LGC Wireless Support for more information.[S11]/S Problem detected in the system CPU. Contact LGC Wireless Support for more information.[S12]/S Problem detected in the system CPU. Contact LGC Wireless Support for more information.[S13]/S Problem detected in the system CPU. Contact LGC Wireless Support for more information.[S14]/S Problem detected in the system CPU. Contact LGC Wireless Support for more information.[S15]/S Problem detected in the system CPU. Contact LGC Wireless Support for more information.[S16]/S Problem detected in the system CPU. Contact LGC Wireless Support for more information.
C-16 InterReach Fusion Wideband Installation, Operation, and Referencer ManualCONFIDENTIAL D-620616-0-20 Rev AC.7 Warning/Status Messages for Fusion Expansion HubsTable C-7 Warning/Status Message for Fusion Expansion Hubs Message Number /Default Description Reason/Action[E01]/W Alarm Input 1. Check the equipment connected to alarm input 1.[E02]/W Alarm Input 2. Check the equipment connected to alarm input 2.[E03]/W Alarm Input 3. Check the equipment connected to alarm input 3.[E04]/S Problem detected in the EH. Contact LGC Wireless Support for more information.[E05]/W SNMP Trap #1. TBD.[E06]/W SNMP Trap #2. TBD.[E07]/W SNMP Trap #3. TBD.[E08]/S Problem detected in the EH. Contact LGC Wireless Support for more information.[E09]/S Fan 1 failure. Check the fan for proper rotation, air flow blockage, and dust accumulation. Replace the Hub on high temperature warning.[E10]/S Fan 2 failure. Check the fan for proper rotation, air flow blockage, and dust accumulation. Replace the Hub on high temperature warning.[E11]/W -5 VDC Monitor. DC power out of range, replace the Hub.[E12]/W 5 VDC Monitor. DC power out of range, replace the Hub.[E13]/W 9 VDC Monitor. DC power out of range, replace the Hub.[E14]/W 54 VDC Pwr Supply failure. DC port power supply out of range, replace the Hub.[E15]/W 3 VDC Monitor. DC power out of range, replace the Hub.[E16]/W 12 VDC Monitor. DC power out of range, replace the Hub.[E17]/W Temperature High. Reduce the ambient temperature, check for air flow blockage, fan rotation.[E18]/W DL path exceeds maximum gain. If the problem is common to more than one port, replace the MH, otherwise check the EH.[E19]/W DL path loss is high. Check the cable for high RF loss. Switch the cable connec-tion to a different MH port. If the problem is on more than one port, replace the EH, otherwise replace the RAU.[E20]/W Hardware Failure (High UL Pilot). Cycle power once. If the fault persists, replace the EH.[E21]/W Hardware Failure (Low UL Pilot). Cycle power once. If the fault persists, replace the EH.[E22]/W Low optical input power. Check the downlink fiber connection.[E23]/W High laser current. Contact LGC Wireless Support for more information.[E24]/S Problem detected in the EH. Contact LGC Wireless Support for more information.[E25]/W Port 1 No DL test tone (Band 1). Hub/Port DL path gain is low.[E26]/W Port 2 No DL test tone (Band 1). Hub/Port DL path gain is low.[E27]/W Port 3 No DL test tone (Band 1). Hub/Port DL path gain is low.[E28]/W Port 4 No DL test tone (Band 1). Hub/Port DL path gain is low.[E29]/W Port 5 No DL test tone (Band 1). Hub/Port DL path gain is low.[E30]/W Port 6 No DL test tone (Band 1). Hub/Port DL path gain is low.[E31]/W Port 7 No DL test tone (Band 1). Hub/Port DL path gain is low.
Help Hot Line (U.S. only): 1-800-530-9960 C-17D-620616-0-20 Rev A CONFIDENTIAL[E32]/W Port 8 No DL test tone (Band 1). Hub/Port DL path gain is low.[E33]/W Port 1 No DL test tone (Band 2). Hub/Port DL path gain is low.[E34]/W Port 2 No DL test tone (Band 2). Hub/Port DL path gain is low.[E35]/W Port 3 No DL test tone (Band 2). Hub/Port DL path gain is low.[E36]/W Port 4 No DL test tone (Band 2). Hub/Port DL path gain is low.[E37]/W Port 5 No DL test tone (Band 2). Hub/Port DL path gain is low.[E38]/W Port 6 No DL test tone (Band 2). Hub/Port DL path gain is low.[E39]/W Port 7 No DL test tone (Band 2). Hub/Port DL path gain is low.[E40]/W Port 8 No DL test tone (Band 2). Hub/Port DL path gain is low.[E49]/W Port 1 DL path loss is high. If the problem is on more than one port, replace the Hub. Switch the cable connection to a different hub port until the Hub can be replaced.[E50]/W Port 2 DL path loss is high. If the problem is on more than one port, replace the Hub. Switch the cable connection to a different hub port until the Hub can be replaced.[E51]/W Port 3 DL path loss is high. If the problem is on more than one port, replace the Hub. Switch the cable connection to a different hub port until the Hub can be replaced.[E52]/W Port 4 DL path loss is high. If the problem is on more than one port, replace the Hub. Switch the cable connection to a different hub port until the Hub can be replaced.[E53]/W Port 5 DL path loss is high. If the problem is on more than one port, replace the Hub. Switch the cable connection to a different hub port until the Hub can be replaced.[E54]/W Port 6 DL path loss is high. If the problem is on more than one port, replace the Hub. Switch the cable connection to a different hub port until the Hub can be replaced.[E55]/W Port 7 DL path loss is high. If the problem is on more than one port, replace the Hub. Switch the cable connection to a different hub port until the Hub can be replaced.[E56]/W Port 8 DL path loss is high. If the problem is on more than one port, replace the Hub. Switch the cable connection to a different hub port until the Hub can be replaced.[E57]/W Port 1 UL path loss is high. Check the cable for high RF loss. Switch the cable connec-tion to a different hub port. If the problem is on more than one port, replace the Hub, otherwise replace the RAU.[E58]/W Port 2 UL path loss is high. Check the cable for high RF loss. Switch the cable connec-tion to a different hub port. If the problem is on more than one port, replace the Hub, otherwise replace the RAU.[E59]/W Port 3 UL path loss is high. Check the cable for high RF loss. Switch the cable connec-tion to a different hub port. If the problem is on more than one port, replace the Hub, otherwise replace the RAU.[E60]/W Port 4 UL path loss is high. Check the cable for high RF loss. Switch the cable connec-tion to a different hub port. If the problem is on more than one port, replace the Hub, otherwise replace the RAU.[E61]/W Port 5 UL path loss is high. Check the cable for high RF loss. Switch the cable connec-tion to a different hub port. If the problem is on more than one port, replace the Hub, otherwise replace the RAU.Table C-7 Warning/Status Message for Fusion Expansion Hubs (continued)Message Number /Default Description Reason/Action
C-18 InterReach Fusion Wideband Installation, Operation, and Referencer ManualCONFIDENTIAL D-620616-0-20 Rev A[E62]/W Port 6 UL path loss is high. Check the cable for high RF loss. Switch the cable connec-tion to a different hub port. If the problem is on more than one port, replace the Hub, otherwise replace the RAU.[E63]/W Port 7 UL path loss is high. Check the cable for high RF loss. Switch the cable connec-tion to a different hub port. If the problem is on more than one port, replace the Hub, otherwise replace the RAU.[E64]/W Port 8 UL path loss is high. Check the cable for high RF loss. Switch the cable connec-tion to a different hub port. If the problem is on more than one port, replace the Hub, otherwise replace the RAU.[E65]/W Port 1 UL path exceeds maxi-mum gain. If the problem is common to more than one port, replace the Hub, otherwise check RAU.[E66]/W Port 2 UL path exceeds maxi-mum gain. If the problem is common to more than one port, replace the Hub, otherwise check RAU.[E67]/W Port 3 UL path exceeds maxi-mum gain. If the problem is common to more than one port, replace the Hub, otherwise check RAU.[E68]/W Port 4 UL path exceeds maxi-mum gain. If the problem is common to more than one port, replace the Hub, otherwise check RAU.[E69]/W Port 5 UL path exceeds maxi-mum gain. If the problem is common to more than one port, replace the Hub, otherwise check RAU.[E70]/W Port 6 UL path exceeds maxi-mum gain. If the problem is common to more than one port, replace the Hub, otherwise check RAU.[E71]/W Port 7 UL path exceeds maxi-mum gain. If problem is common to more than one port, replace the Hub, otherwise check RAU.[E72]/W Port 8 UL path exceeds maxi-mum gain. If the problem is common to more than one port, replace the Hub, otherwise check RAU.[E73]/W Port 1 54 VDC Power Enabled. Caution: Port 54 VDC power may be present at the output.[E74]/W Port 2 54 VDC Power Enabled. Caution: Port 54 VDC power may be present at the output.[E75]/W Port 3 54 VDC Power Enabled. Caution: Port 54 VDC power may be present at the output.[E76]/W Port 4 54 VDC Power Enabled. Caution: Port 54 VDC power may be present at the output.[E77]/W Port 5 54 VDC Power Enabled. Caution: Port 54 VDC power may be present at the output.[E78]/W Port 6 54 VDC Power Enabled. Caution: Port 54 VDC power may be present at the output.[E79]/W Port 7 54 VDC Power Enabled. Caution: Port 54 VDC power may be present at the output.[E80]/W Port 8 54 VDC Power Enabled. Caution: Port 54 VDC power may be present at the output.Table C-7 Warning/Status Message for Fusion Expansion Hubs (continued)Message Number /Default Description Reason/Action
Help Hot Line (U.S. only): 1-800-530-9960 C-19D-620616-0-20 Rev A CONFIDENTIALC.8 Warning /Status Messages for RAUsIn Table C-8, the message number is in the following form:[Rnn]/X where nn equals the message number, and X equals the default of either Sta-tus (S) or Warning (W).Table C-8 Warning/Status Messages for RAUsMessage NumberDefault Description Reason/Action[R01]/W Temperature High. Check RAU location for excessive temperature; check for air flow blockage and/or incorrect installation. Move the RAU to a cooler environment.[R02]/W No communications from Hub. Check the cable for high RF loss. Switch the cable connec-tion to a different hub port. If the problem persists, replace the RAU.[R03]/W DL RF path loss is too high. Check the cable for high RF loss. Switch the cable connec-tion to a different hub port. If the problem persists, replace the RAU.[R04]/W DL RF path exceeds maximum gain. Check the Hub for proper operation; switch the cable con-nection to a different hub port. If the problem persists, replace the RAU.[R05]/S DL RF path problem (Band 1). Unable to complete the DL system end-to-end test, replace the RAU when possible.[R06]/S DL RF path problem (Band 2). Unable to complete the DL system end-to-end test, replace the RAU when possible.[R08]/S System test required. Run system test.[R09]/W Antenna Disconnected. Check RAU antenna connection; re-run system test.[R10]/S UL RF path problem (Band 1). Unable to complete the UL system end-to-end test, replace the RAU when possible.[R11]/S UL RF path problem (Band 2). Unable to complete the UL system end-to-end test, replace the RAU when possible.[R13]/S Problem detected in the RAU. Contact LGC Wireless Support for more information.[R14]/S Problem detected in the RAU. Contact LGC Wireless Support for more information.[R15]/S Problem detected in the RAU. Contact LGC Wireless Support for more information.[R16]/S Problem detected in the RAU. Contact LGC Wireless Support for more information.
C-20 InterReach Fusion Wideband Installation, Operation, and Referencer ManualCONFIDENTIAL D-620616-0-20 Rev A

Navigation menu