ADI DVS-821 Satellite Receiver User Manual 8

ADI Corporation Satellite Receiver 8

8

Download: ADI DVS-821 Satellite Receiver User Manual 8
Mirror Download [FCC.gov]ADI DVS-821 Satellite Receiver User Manual 8
Document ID12716
Application IDlH8PQqqj8vzjCZj1TMEEnQ==
Document Description8
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize62.47kB (780830 bits)
Date Submitted1998-11-13 00:00:00
Date Available1999-01-25 00:00:00
Creation Date2001-07-10 14:29:51
Producing SoftwareAcrobat Distiller 4.0 for Windows
Document Lastmod2001-07-10 14:29:53
Document Title8

DVS-821 User Manual
For your safety
Important notice you need to know before accessing this receiver. Please read and
understand this manual before using the receiver.
1.
This receiver should be operated only from the type of power source indicated on
the back label If you are not sure of the type of power available, consult your
dealer or local power company.
Pulling the power supply cord will disconnect the device, the socket-outlet shall be
installed near the equipment and shall be easily accessible Always disconnect
power supply cord before servicing.
This receiver should never be placed near or over a radiator or heat register. Do
not allow the receiver to be exposed to hot, cold, or humid conditions.
Do not attempt to service this receiver yourself, as opening or removing the
receiver cover may cause the damage to the receiver Refer all servicing to
service personnel
Unplug this receiver from the wall outlet and refer servicing to qualified service
personnel under the following conditions -
0 When the power cord or plug is damaged or frayed
e If liquid has been spilled into the receiver
0 If the receiver has been exposed to rain or water
- If the receiver does not operate normally when the operating instructions are
followed. Adjust only those controls that are covered by the operating
instructions since improper adjustment of other controls may result in damage
and will oflen require extension work by a qualified technician to restore the
receiver to normal operation
. If the receiver has been dropped or the cabinet has been damaged
0 If the receiver exhibits a distinct change in performance, indicating a need for
service
6. Do not stack any electronic components onto the receiver
7.
Unplug this receiver from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners, Use a damp cloth for cleaning.
DVS-821 User Manual
About this Manual
This manual provides you an overview of functions of your decoder.
- Installation and Preparation - This section will show you a complete guide line how
you install the receiver and how to operate remote control.
- Operation of DVS-SZl Decoder - [fyou are not familiar with the satellite TV, you
need to read this section carefully in order to access and explore DVS-SZI.
n Troubleshooting - The table will answer and solve most of possible problems occur.
Features
Digital satellite receiver offers satellite video/audio broadcasting service and has the
capacity to receive one hundred transponder signals and three hundred channels.
The easy-accessed on—screen setup is designed to help you to install basic setups and
use channel list on your TV screen.
With the receiver, you may get to enjoy free-to-air channels of satellite broadcasting
channels.
ii
FCC Statement on CLASS B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the '
FCC Rules. These limits are designed to provide reasonable protection against han'nful interference when the equipment is
operated in a residential installation. This equipment generates, uses; and can radiate radio frequency energy and if not
installed and ised in accordance with the instruction manual may cause harmful interference to radio communications '
However, there is no guamntee that imerference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the
user is encouraged to ‘try to correct the interference by one or more of the following measures:
—Recrient or relocate the receiving antenna
—Inerease the separation between the equipment and receiver
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
—Consult the dealer or an experienced radio TV technician for help
Notice:
(DThe changes or modification not expressiy approved by the party responsible for compliance could viod the user
authority to opemte the equipment
(2) Shielded interface cables and AC power cord. if any, must be used in order to comply With the emission limits.
Contents
For your safety............ ........................................................................... 1
About this manual ........................................................ ..................... 11
Features ............... ..... ........................................................................... ii
B Installation and Preparation... ..... . ......................................... ....1
Checking the Package Contents ............................................................... 1
Front Panel Buttons and LEDs....... ......................................................... 1
Rear Panel Ports ......... ......‘...‘..... ............................... ........... ................. 2
Connections Settmg2
Remote Control Keys.... ...4
E7 Operation of the Receiver .......................................................... .4
Quick Tips on Useful Buttons .................................................................. 4
Steps for using the menu ............. .................................. 6
Main Menu ............................................... . ........................................... 6
Settings ......................................................................................... 7
1. Language Options ............................................................ 7
2. Parental Lock...
3. Channel Lock
4. TV Fonnat....
5. Soundtrack Options ........................................................ 10
6. Audio Output Option ...................................................... 1 1
Program Manager ........................................................................ 12
1. Alphabetic Channel Sorting ............................................. 12
2. Change Category Lists .................................................... 13
Favorite Channel Groups .............. . ............................................... 14
Organizing Channels . 15
Install Methods ... ......................... .. .............................................. 16
l, Transponder Setup ......................................................... 16
0 Add.. m... 17
. Edit.. . 18
. Delete ................................... 19
- Add Transpondem by Sat. ...20
0 Auto Sean Transponders .22
- Delete All Data ............. ...23
2. Dish Installation ................ .......... ................................... 23
- Dish Adjustment ..................................... . ................. 23
3. Clock Setting ........... ..... .................................................. 24
4. Change Password ".24
Remote Control Help .................................................................... 25
E7 Trouble-Shooting ........................................... ... ......................... 27
E Specifications ............................................................................. 28
E7 Glossary ..................................................................................... 30
DVS-821 User Manual
Installation and Preparation
Checking the Package Contents
Check that 10 items are present and in good condition:
DVS-821 receiver
Remote control
3. Two pieces of AAA size batteries
4 AV (Audio/Video) cable
S-V'HS cable
0/12 volt cable
Power cord
75 remodulation signal cable
6.
7. SCART cable
0. User manual
Front Panel Buttons and LEDs
m—
The front panel includes the following function keys:
6) POWER standby:
® Arrow keys / 0K:
6) Menu:
(9 Standby indicator:
(3 VFD
Puts the decoder into standby mode or take it out of
standby
The Arrows keys are used to move up and down the
menu. The OK key is for confirming any highlighted
options in the menu, The 4 / b keys can also be used
for volume adjustment, and A / v arrow keys for moving
up and down within the menu
Displays the main menu when it is not activated on your
V screen or vis versa.
Lights up when the decoder is at operating mode.
Vacuum Fluorescent Displays 15 a display screen
DVS-821 User Manual
Rear Panel Ports
0 Satellite IN: Dish signal input
+5V, pulse: LNB servo polarization control
0/12 V LNB control
TSG: Test signal
TV/VCR: SCART interface to TV/VCR
S-Video: S-sync connect to TV S-VHS input
RSZ32: Low speed data port
RF OUT: Modulating UHF/Vin: signal output
TV ANT IN. Terrestrial signal input
Q 0 0 0 Q 0
Connections Setting
951m , E
g, e
-/ Never remove the decoder caver.
I Unplug the unit from the wall mullet when the power supply coral (Jr plug is
damaged or frayed.
-/ Do not turn on the power will all the necessary cables have been connected.
DVS-821 User Manual
Remote Control Keys
When using the unit, one touch of following buttons for quick services.
®®©®
@ INFO: Displays information of the
current channel like channel number, channel
name and service provider.
® POWER standby: Puts the receiver into
standby mode or take it out of standby.
@ Volume (+/-): To adjust the volume.
@ Channel (+/-): To step up and down the
channels (“+“ for next channel, — for
preceding channel).
(5 Number keys: To select different
channels and to input numbers in menu.
© MUTE: To mute the sound,
@ EXIT: To quit the current menu and
other information from the screen or AV
mode
Arrow keys/ 0K: The Arrows keys
(A,v,<,>) are used to move up and down or
lefl and right the menu, OK key is for
confirming highlighted options in the menu.
Each of the four arrow keys also represents a
one touch menu pop-out function outside the
OSD menu.
A key: Displays Audio Selection menu, (See
Page 11)
v key: Switches between VCR and SAT (See
Page 9)
4 key, Chooses Favorite Group. (See page 14)
b key: Lists Channel List. (See page 13)
@ MENU: Displays the main menu.
® RECALL: Jumps to the last viewing
channel.
63 TV/ RADIO: To switch between TV and
Radio programs.
NOTES: Install twa AAA bar/cries into the compartmem using correcrpalanty ( . -).
DVS-821 User Manual
Operation of the Receiver
Make sure all connection to the decoder is properly installed.
Quick Tips on Useful Buttons
Press  key to display the channel you watched before it
was turned off If power on for the first time, the receiver will show
the main menu for installation
Select channels by using the Channel <+/—> key on the remote control.
Adjust volume by using the Volume <+/-> key. While adjusting
channel or volume, the volume and channel bar will be displayed the
screen.
- Volume
(01mm(mam(«a(«mm»):>))n»»m)»m)m)
. Key in channel number
Use Number buttons (0-9) to tune to a channel directly.
0 TV channel
The channel number will be shown at the upper right hand corner
on your TV screen
If wrong channel number has been keyed in, an on-screen warning
message will show up
Invalid Program [xx]
DVS-821 User Manual
Press OK key to exit this message and key-in the correct channel
number you would like to watch.
a TV/RADIO Channel
When TV/RADIO key on remote controll is pressed while your
television is in TV program, and if there is no radio program at the
moment, you will see an on-screen message as below
No Radio Program
Press OK to exit this message.
- Channel information
Step 1. Press INFO key to give short information of the
program
“ Servie name (eg. HBO)
* Channel number (e.g. CH 25)
* Whether it‘s a Scrambled program (e.g a Pay program) or not
* Indicating current Favorite Group
* TV or Radio mode
Step 2‘ Press EXIT to quit the menu.
DVS-821 User Manual
Steps for using the menu
l, Press  key to display the main menu.
2. From the main menu, use the A/ v keys from the remote control to select your
desired option. The selected option will be highlighted and press OK to
choose it.
NOTES: lfOK key lspressed, a means the aptly» has been selected. This is applicablzfar 011
the menu: and sub-menu)
Main Menu
Press MENU key at the front panel or on the remote control to activate the on-
screen Main Menu
\ | ‘ Use A / v arrow keys to move the green cursor up
59W“ . ° Schedule or down,
Plugmm Mammy ‘ Use 4 l > arrow keys to move the cursor lefl or
Manager Channels _ fight
Favorite .
Chafing, We Mm“ Press OK to select a menu
Group . , , 1.1mm
Help
NOTES: Schedule is currently not functioning in this
model.
There will be a help message for each menu Whenever the green cursor lay on it,
Settings Press “OK” to set up the IRD.
Program Manager Press “OK” for channel/program sorting.
Favorite Channel Groups Press “OK” to edit your favourite channels.
Schedule' Press “OK" to list the reserved future programs
Organizing Channels Press “OK” to organize TV/RADIO channels.
Install Methods Press “OK” to install the l'RD.
Help Press “OK” to show all the functions on remote
controller.
* The Schedule ufthis made! shed in gray does not function.
DVS-821 User Manual
Settings
When “Settings” is chosen, the sub-menu is shown. It includes 6 items.
Settings
Language Options
Parental Lock
Channel Luck
Highlight bar
Til Format Use A / v key to scroll the highlight bar up
“Wm“ 0pm)" and down for menu selection.
Audio Output Option
There will be direction messages on each menu whenever the green cursor lay
on it,
Language Option Press “OK” for language selection
Parental Lock Press “OK” to set censorship level
Channel Lock Press “OK” to lock/unlock channels —|
TV Format Press “OK” to select your TV format
Soundtrack Option Press “OK” to select the required soundtrack
Audio Output Option Press “OK“ to select the audio output channel
1. Language Options
Language options menu is to select the language of the menu.
Language Options
Tick to ’
choose
English
Chinese
German Help message:
French
Spanlish
Press lefi arrow key to choose a
language, Press “OK” to finish
setting.
Press OK to save and return to
Settings
Press EXIT to cancel and return to
Settings.
DVS-821 User Manual
2. Parental Lack
Parental lock is to catagorize TV program ratings.
Parental Lock
Family
Parental Guidance
PG-13
NC-fl
Help message:
Press lefi arrow key to set
classification. Press “OK" to finish
setting.
' Fl
Nu Block
You will be asked to enter password for parental lock setup.
Please Enler Password If the correct password is pressed, it
will go to the sub-menu. The menu is
.-un shown on the left. The default value
of the password is 0000,
Use number keys (0-9) to enter
password
Afler you have finished parental lock
setup, press OK to save and return to
Settings or press EXIT to leave
Parental Lock menu with no change.
NOTES: You snll need to key in password
even lflhe progrmn ls rated the some asyow
setting.
3. Channel Lock
Channel lock is used to lock specific channels, so the viewers have to key in
password in order to watch those channels. TV programs will he listing
before radio programs.
DVS-821 User Manual
Channel Lock
Key to lock
If “Channels Lock“ is chosen, you must enter the password to pass the
verification.
Please Enter Password
Help message:
Press lefl arrow/right arrow key to
lock/unlock channels
If the correct password is pressed, it wil
then get into the Channel lock menu.
Then press OK to save and return to
Settings or press EXIT to leave Channel
Lock menu with no change
NOTES: A/leryau choose to lock channeIs, you will be asked to key in password If the
wrong password has been pressed, [he screen wlll jump back to the last channelynu were
watching andyou won ‘t be able to watch the lack channels. You need to key in password
every time you lune to those lock channels.
4. TV Format
This sub-menu is to allow you to choose your TV set format The IRD will
send the suitable video signals for your
> You may press v key on the remote control to switch between VCR and
SAT. It is a one-touch hot key function Please use it when you are not
in the OSD menu
TV Format
Video Mude
SCART Signal
TV Aspect Raliu 4:3
TV System
l. The default setting is SAT,
2. The default is CVBS.
3. The default of TV aspect ratio is 4:1
Use 4 / b keys to choose between 4:3
and 16:9.
4, AUTO and PAL are TV specs The
default of TV System is Auto. Use
1 / b keys to choosebetween AUTO
and PAL,
Please refer to your TV specification while
DVS-821 User Manual
choosing TV system.
Press OK to save and return to Settings;
press EXIT to leave TV Format without
any change.
Help messages:
Video Mode Press [ell/right arrow key to select VCR Mode,
SCART Signal Press lefi/right arrow key to select SCART signal format.
TV Aspect Ratio Press lefi/right arrow key to select TV aspect ratio.
TV System Press lefiJright arrow key to select your TV system.
NOTES: When switch to VCR mode, the display screen located at the front panel will
show "-—A V-VCR-- To return to Satellite Program Display, press EXIT
5. Soundtrack Option
Select audio language for programme watching in lst and 2nd Soundtrack
Options. The selected languages, lst Soundtrack Options priority, will be
picked to access the audio language of the programme watching. If the
programme does not support the selected language of lst Soundtrack
Options, the language onnd Soundtrack Options will he used
Soundtrack Option
P 181 Soundtrack Options
2nd Soundtrack Options
Help message:
Press "OK“ to select your lst/2nd
Soundtrack
The sub-menu looks like diagram below:
tst Soundtrack Option
Not Used
Enghsh
Chmese Help message:
Spanish
German
French
Press lefl arrow key to select lst
language. Press “OK” to finish
setting
10
DVS-821 User Manual
2nd Saunduack Dptlun
; Nol‘Used
EngHsh
Chinese
Spanish
German
French
Help message:
Press lefi arrow key to select 2nd
language, Press “OK“ to finish
setting,
NOTES: The default setting is "Not Used. " If the soundtrack Ufa program does not
mulch [he chosen saundtrackx or 151 and 2nd Soundtracks arz set as: “Nat Used”, [RD
will nummalically play the In audio PID language ofrhe program.
6. Audio Output Option
Choose the audio output channel for your box.
Mic 0mm 0mm
" ' Lefl
' mm
m Chanmls
NOTES; The default is Bull! Channels.
channel outpu/s
> By pressing A key alone will switch
the audio output to Both Channels
(Stereo), Lefl, or Right. It is a one-touch
hot key that would keep you out of the
hassle of getting into layers of menus.
Decode selected channel and play it on both
11
DVS-821 User Manual
Program Manager
Program Manager is a very usefixl tool to sort channels alphabetically or by
personal preference.
Program Manager
Alphabetic Channel Surfing
Change Category Lists
Help message:
Alphabetic Channel Sorting Press “OK” to sort channels by alphabetical
order,
Change Category Lists Press “OK” to change category lists in Guide
ITIEHU.
1. Alphabetic Channel Sorting
This convenient tool is very useful to sort out immediate channels
alphabetically.
Use 1 / b key to move around the
alphabets. And use A/ v key to scroll the
programmes at the lower level of the
menu.
Alphabetic Channel Sorting
unz TVBS 1m nv Help message:
[105 TVIS [135 TTVS
Ian mn alphabetic for channel sorting &
up/down key for scrolling up/down
the channel list. Press “OK” to select
a channel.
Press lefi/right key to select an
12
DVS—821 User Manual
> > key is a one-touch hot key to display All Channels menu when you are
not accessing menu setting,
WWI Channels]
Ml HENAN
Key is locked
programme 002 Main“
m Fullan
Luck ls scrambled 004 R JX SAT
programme
LNTV ma
GD‘N ma
006
2. Change Catagory Lists
It is currently not fimctioning in this model.
Use A / V key to scroll the
highlight bar up and down for
channel selection. And 4 / > key
to scroll page up and down.
Press OK key to display the
channel.
13
DVS-821 User Manual
Favourite Channels Group
The function of this menu is to group in favourite channels by personal
preference.
>> 4 key is a one-touch hot key to select Favorite Groups. (eg. All Channels,
Carol, Rebecca or Gary) It fiJnctions when you are not accessing the OSD
menu
Favorite channels Group
Md . f LCamI
m 2 Rebecca
Use A / v key to choose between lefl side of
the menu. Then press OK to get into the
Mm 3 Gary > - right side of the menu.
Seluullun f Au Channels
NOTES: User has 9 our afll) spacer Infill m the Favorite Channels Group. There should be
a block namely “All channels " which cannot be deleted. The default isAll Channels.
Help message oflevel l (lefi side):
Add Press “OK” to add a new group
Edit Press “OK” to edit an existing group,
Delete Press “OK" to delete an existing group.
Selection Press “OK” to choose your favorite group
Help message of level 2 (right side):
Add Move your cursor by using right/lefi arrow key, input
group name by using up/down key. Press “OK” and
then choose your favorite channels.
Edit Choose one group. Press “OK“ and then edit your
favorite channels.
Delete Choose one group, Press “OK” and then delete your
favorite channels group.
Selection Choose one group. Press “OK” to set your favorite
channels.
DVS-821 User Manual
Organizing Channels
This menu is to use for switching the channels‘ number (changing the sequence
of channels) For example, we want to switch TVBS from channel 1 to
channel 2 and CNN to channel 1. The first step is to choose the source
channel. In this case, the source charmel is TVBS.
Organizing Channels
Move the highlight bar to 002 with A / v key
and Dress 4 key to select TVBS.
Help message:
Press lefi arrow key to choose one
charmel you want to move
Then use A / v key to drag the channel name
(TVBS) around the menu,
When the blinking channel is moved to the
place where you want to switch to, in this
case is 002, the selected channel is replaced
by the blinking original channel.
Organizing Channels
Press 4 key to interchange between these
two channels. Or press > key to cancel.
Move the highlight bar to 002 section where
CNN is and press 1 key to switch these two
channels.
To return to default setting:
Press lefi arrow key to retum to default
settings
If “Default setting” is chosen, the help
message shows up and will ask user to
confirm default setting.
Press OK to choose/confirm default
settings.
15
DVS-821 User Manual
lnstall Methods
First, you will be asked to input password.
Please Enter Password
Use number keys (0-9) to kw in password.
.-n- The default is 0000
Installation
_ _ Use A / v key to move between the menu.
Dlsh lnslallallon ,
Press OK to get into sub—menu.
Clock Selling
Change Password
Help messages:
Transponder Setup Press “OK” to modify transponder list.
rDish Installation Press “OK” [0 install your dish position, i
Clock Setting Press “OK” no set the receiver‘s clock.
Change Password Press “OK” to change the password ‘i
NOTES: Clack Szmng in notfunctioning in this model.
1. Transponder Setup
The first option of Install Methods Games in the form of Transponder Menu
dialog box. The menu offers Add, Edit, Delete, Add Transponders by Sat, Auto
Scan Transponders and Delete All Data options,
WI” til,
D Add
Edll
Balm
Add Transponder: by Sal
Arno Scan Transpomlm
Balm All Data
16
DVS-821 User Manual
Help messages:
Add Add a new transponder.
Edit Edit the existing transponders.
Delete Delete a transponder.
Add Transponders by Sat
Add new transponder by selecting satellite
Auto Sean Transponders
Scan multiple transponders
_|
Delete All Data
Delete all transponders, programs and settings.
. Add
Afier choosing the Add option from the Transponder Setup, use A/V
keys to move up and down through the menu options.
The sub-menu of “Add“ is shown as below.
Use number keys (0-9) to key in
values of LNB Frequency,
Transponder Frequency and
Symbol rate. And use 4 / > keys
to move the unit position.
Use A/v s to move around rows.
Use 4 / > keys to switch between
vertical and horizontal for
Polarization. To switch between
ON/OFF for 22Khz and 12V, use
4 / > keys.
Help messages:
LNB Frequency (KHz) Input the frequency from the number keys, press
“OK” to finish setting.
Transponder (Khz) Input the frequency from the number keys, press
“OK” to finish setting.
Symbol Rate (K Baud) Input the symbol rate from the number keys,
press “OK” to finish setting,
Polarilation Press lefi/right arrow keys to choose
polarization, press “OK” to finish setting.
17
DVS-821 User Manual
22 KHz Press lefi/right arrow keys to toggle 22Khz On]
Off.
12 V Press lefi/right arrow keys to toggle 12V
Orr/Off.
o Edit
Afier choosing Edit option from the Transponder Setup, use A / v
keys to move up and down through the menu options
The Edit menu will only list the information for the first three
transponders. Each string of information contains the details of
Network name, LNB freq, Transponder freq., Symbol rate,
Polarization and 22KH2.
Use A / v key to check the other
information in the list. And
xmlm choose a particular transponder
pom,” I l and press OK key. The editing
zzng ' ' dialog box appears that will allow
you to modify the information.
Afier you choose a transponder,
you will see the sub-menu as
shown on the lefl.
Use number keys (0-9) to key in
values of LNB Frequency,
Transponder Frequency and
Symbol rate. And use 4 / b keys
to move the unit position.
Use A / v keys to move around
rows.
Use 4 / > keys to switch between
vertical and horizontal for
Polarization. To switch between
ON/OFF for 22Khz and 12V, use
4 / > keys.
18
DVS-821 User Manual
Help message:
LNB Frequency (KHz)
Input the frequency from the number keys—1
press “OK" to finish setting.
i Transponder (KHz) Input the frequency from the number keys,
press “OK” to finish setting.
Symbol Rate (KBnud) Input the symbol rate from the number keys¢
press “OK” to finish sening.
Polarization Press [eh/right arrow keys to choose
L polarization, press “OK“ to finish setting.
22 KHz Press lefi/right arrow keys to toggle 22Khz
On/Ofl'.
[EV Press left/right arrow keys to toggle 12V
On/Off.
0 Delete
Afier choosing Delete option from the Transponder Setup, use A / 7
keys to move up and down through the menu options.
The Delete menu will list only the information for the first three
transponders Each string of information contains the details of
Network name, LNB, Transponder freq, Symbol rate, Polarization and
22KHz. Use v key to check the other information in the list. And
choose a particular transponder and press OK key.
Then you will have to confirm whether to delete the selected
information or not.
Help message:
Choose a transponder your want to delete by
usrng lefi/nght keys. And then press "OK“.
1o
DVS-821 User Manual
After the transponder is selected, the sub-menu is shown as below.
DI“
ram-u? (mu) Move the cursor to “Yes” and press
mm KM -
"mm (mm; 1 0K to confirm the deletion. Move
mum f , the cursor to “No“ and press OK to
2m" ‘ cancel the deletion. Press EXIT key
in
anytime to cancel the deletion.
o Add Transponders by Sat
It is a preset data of all satellites.
lst level menu: Use 4 key to selecfldeselect a transponder, Scan
TPs is a default setting. Its fixnction is to scan over the selected
transponders.
Mil man: by smnm
mam-mu) 1 m HmBlrdmlli)
Ashanti-NC) 7 nus marrow“)
mummy ' an mnsmm
m mm) . mo
Eye to select
Psszqnn ' an
m uwm) . m Scan TP:
5 s} a? g
2nd level menu: Select a number (0-9) in which its LNB Frequency
is corresponding to your satellite‘s by using 1 / P keys.
Salad um quuency (GK!) run Mam-me)
|)s.1 so zmsn a) 1mm 4)1 mm 5)1n.750
6mm 1) 11.25» 0111.30» 9; 11415
Hz 5678?
3rd level menu: The default setting of ZZKHZ is NO. Use 4 I >
keys to switch around Yes/No.
mm on 22mm: hnspnndars In Lsiasmlllc)?
20
DVS-821 User Manual
4th level menu: The default setting of 12V is NO. Use 4 / > keys
to switch between Yes/N0.
TURN 0N12v lor Mnspnnden ln Nisan-Hum
5th level menu: Displays the transponders of all selected satellites.
Use A Iv keys to scroll the highlight bar up and down. Press 4 key to
select/deselect a transponder, Use > key to edit values of transponder.
(eg. LN'B, Symbol Rate, Polarization, ZZKHZ and 12V)
753355“!
«in:
Afier above 5 menus were set, the box will automatically save the data.
Count 10,
Saving Dal ease Wall! 10
If Scan TPs was selected in the Add Transponders by Sat menu, the
1st level menu, Scan Transponders menu will be shown as below.
ozF—z' our» um ‘
win: uni um
Use A / v keys to scroll the highlight bar up and down. Press 4
key to select/deselect a transponder for transponder scanning.
The corresponding channels of any deselected transponder will not
appear in any channel related menus, In short, you need to scan
transponders first in order to watch channels.
21
DVS-821 User Manual
- Delete All Data
neumnnm? You will be asked to confirm Delete All
Data. The default setting is NO, If you
want to delete all data, use 4 / > keys to
choose Yes.
Delete
Add Trlnxpondum hy Set
_Aqu SeanflTransuondm
at; All m ' " ' '
2. Dish Installation
This menu is to adjust satellite dish position.
Dishlnslallallan The default setting of LNB Power is
LNB PGWEI
ON,
Help messages:
LNB Power Press loll/right arrow key to turn ON/OFF
LNB power, press “OK” to finish setting
lDish adjustment Press “OK” to adjust your dish,
. Dish Adjustment
The menu is to compute the Azimuth and Elevation using the Sat»
Position and your position when setting your dish.
Dlsh MIustmenI
sin mm wow i Use number keys (0—9) to key in
um m the degree of Sat. Position and
nzsnn , (mun . _
mum your posmon.
And use 4 I > to switch between
the East/West, North/South
setting. Use A / V keys to move
arround rows,
[mm
23
DVS—821 User Manual
3. Clock Setting
It is currently not functioning in this model,
4. Change password
Step 1:
WW MSW” Every‘time user changes the IRD
password, lie/she will be asked to key in
old password.
Step 2:
Change Password If the correct password is keyed in, user
ul newnmwwd will be asked to key in new password
Step 3:
If the new password is pressed, the IRD
will ask user to confirm this setting.
change Passwnm
Step 4: If password is successfully changed, you will get a confirmation
Password changed.
Step 5: If new password is not typed in correctly, you will be informed.
The new password was not
retyped correctly.
24
DVS-821 User Manual
Remote Control Help
You may press any key on remote control! to show descriptions.
Remote Control Help
To toggle between the options or
move the cursur Iett pnsitiun
while inputting any number.
Message 2: Press “EXIT"
twice to exit this help menu.
All the messages are:
POWER To put IRD into standby or take it out of standby mode.
TVIRADIO To switch between TV and radio programs
INFO To display information about current program
MENU To display the main menu.
EXIT To remove a menu or other information from the screen In the
case of menus, the preceding menu is displayed
A Up To move the highlighting up the menu.
V Down To move the highlighting down the menu
4 Left To toggle between the options or move the cursor lefi position
while inputting any number.
> Right To toggle between the options or move the cursor right position
while inputting any number
0K To confirm your selection and move forward to the next menu,
or to confirm your adjustments and return to the preceding
menu.
25
DVS-821 User Manual
Number keys (0- To select different channels or input numbers
9)
Recall To return to the previous satellite service you were watching or
listening
Mute To mute the sound
Volume Up To increase the volume.
Volume Down To decrease the volume.
Channel Up To View or listen to the next satellite service.
Channel Down To view or listen to the preceding satellite service
26
DVS-821 User Manual
Trouble-sho
oting
Display on
does not light u / is not
lit
”ront panel Power cord is not Check t
connected
1at the power cord is
et
lugged into the power soc
No sound or picture
Satellite dish not pointing at
satellite
Adjust the dish
Ask for technician
Polarization wrongly set
Change the polarization
Channel (radio channel only
have audio)
. Change channel
a Get charmel information by
pressing INFO button
No signal or weak signal
Check cable connections,
LNB and other equipment
connected between LNB and
receiver
The interruptive signal may
be caused by bad weather
The LNB is faulty
Transponder settings error
. Ask for technician
No power supply to the . Check 13/18 V from receiver
LNB through cable to LN'B
0 Ask for technician
- Replace the LNB
Ask for technician
Check freq. table for correct
settings
Remote control not
working
No active video
Battery exhausted
Change battery (two AAA
batteries)
Fluorescent light interfering
with remote control
Switch off the light
Remote control
aimed
wrongly
Aim the remote control unit at
the receiver
Unplug the power cord and
replug it into the wall outlet.
Push POWER standby key
to turn the power Off and
back On.
"‘ Ifyou still cannot wlve the problem, please contactyour dealer.
1—1
DVS-821 User Manual
Specifications
Decoding
it rate
Output
Aspect Ratio
Active Pixel
Output Connector
Decoding
Mode
it rate
Demodulation
S ymbol rate
Outer code
Inner code
Energy dispersion
geese-e; flu ,
Frequency
Input level
Channel bandwidth
Input socket
NH’EG—Z & MPEG-l Compatible
Max‘ 15 Mbps
NTSC/PAL (Auto)
16.9, 4:3
720 x 480@30fps; 720 x 576@25fps
RCA, s-VHs, SCART
MPEG-Z/MPEG-l Layer I & ll
Mono, Dual, Stereo, Joint stereo
Max 384 Kbps
5 ,
QPSK
2—45Mbd
RS (204, 188, 8)
All DVB rates
DVB-S recommendation
950MHZ to 21 SOMHZ
-25dBm ~ -65dBm
SSMHz
F-type connector
DVS-821 User Manual
Power supply 13/18V (400mA max) polarization with short circuit
protection
Polarized control 13/18V polarization switching (vertical/horizontal)
Remodulator Connector Type: Plug, IEC169—2 male
TV System' PAe-G
Band switch 22Khz tone control
LNB Switch 0/12 volt control
User interface Favorite Channels, Porgram Information
Supply voltage 90-264 VAC, 47-63Hz
Power consumption 25 Watts max‘
Dimensions
(W x D x H)
Operation temperature +5°C to +40“C
360mm x 251.4mm x 60mm
Storage temperature -20"C to +70"C
* The above xpECl/italiuns are Subject to change without notice
29
ll
0L “WM aszf’ldW'iflflfl “MES
amp am aims Amop’ewoam} mm xoq 9111 ‘1xaN
uolln n:.uxa.swd ‘um uuasun : IL] fluxumas
‘uoqe 0: fix] ssejd Raul “0A
“Euguums ums pu'e Siapuodsueu pawaras sq: Luxguoa 015ml no ssejd
slauueqa qowm 01 19pm U] ml} Slapuudsunn
uzos 01 paau 110K ‘uoqs ul ‘snuam pomp; (emreqo Aue u; madde
mu mm Japuodsu'en paxoalasap fine 30 slauump Sugpuodsauoo sql
“fluyuueas Japuodsufiu 103 Japuodsuen E Joslasspflwws
01 [£34 > SSQId “mop pun dn mq “figmfigq 9111110195 01 sfls>| A / v asn
‘nueux dmss Japuodsuexl
u! sxapuodsuml tress males [£11,3st puv. nueul WS Aq snpuodsunl
ppV dp|s Ken: noA ‘sxapuodsunn sq] JaAo was 01 19de mq
samples may Japuodsueu Man flue Sugppe lou are no& 11 ‘nuam mg &q
slapundsuml ppv y) mad 191191 59 sums sql Almagseq s; uopaurg S11
snpuodsuml mass omv
01 “PM Essa“ """ 9th fiulnes
“lamp am eAes Almomwome [um xoq sq] ‘1st
mm: at mu mm mw census: m Hummus
“Sumomes uoqe 01 uxg ssmd [flaw no A
‘paquoS eq 01 fiugofl smpuodsum sq] unguoo 01 £33 X0 ssc-ud
lenuvw 1°50 [ZS-SAG
Glossary terms
DVS-821 User Manual
(Low-nose block converter) The LNB is an electronic unit
mounted on the satellite dish. lt receives the signals reflected by the
dish and converts them to sigtals that can be used by the satellite
receiver.
(National Televnswn Standards Committee) A broadcast standard
developed and established inthe USA which is also used in Japan.
(Phase Altematmg Line) Transmission standard for TV signals
used for conventional and satellite broadcasting,
Polarization allows two signals to use the same frequency band.
The signals from a satellite are transmitted either with lmear
(Vertical or horizontal) polarimtlon or circular (right or lefl)
polarization.
The carrier frequency for incoming signal from satellite.
Number of symbols transmitted per second.
The band selection signal used in Ku band LNB,
The LNB switch control signal used for two LNB switch box.
30

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2001:07:10 14:29:51
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:07:10 14:29:53-04:00
Page Count                      : 35
EXIF Metadata provided by EXIF.tools
FCC ID Filing: BR8DVS-821

Navigation menu