8
Introduction Thank you for purchasing the ADI LCD monitor. This MicroSoan 5T/MicroScan 6T monitor combines 3 TFT (thin film transistor) liquid crystal display panel structure and a built-in baokh‘ght with inverter for a better picture quality. It is designed to meet the needs of users for performance, consistency, and outstanding image quality through a streamlined development process in which pivoting flmctionality provides a variety of capability. Features - Both the 14-inch (MicroScan ST) and 15-inch (MicroSoan 6T) TFT active matrix color liquid crystal displays have a XGA resolution of 1024 x 768 pixels with fun-color. 0 Plug and Play functionality automatically adjusts the monitor to its optimum performance. - Viewing angle is approximately 110 degree horizontal and 120 degree vertical . The VESA DPMS-compliant power-saving feature automatically powers down the monitor afier a user-defined period of inactivity. . Analog RGB signals, Synchronous signals (Hsync, Vsync). - Multi-scan functions of XGA 1024 x 768, SVGA 800 x 600, VGA 640 x 480, VGA-Text 720 x 400, 640 x 300 and 640 x 350 for a higher level of graphics performance. 0 Pivoting capability enables the monitor to rotate 90 degrees. a A built»i.n microphone and speakers feature to complete audio system. 0 A built-in USB hub with 4 downstream ports and l upstream port allows to connect multiple device link-ups 0 OSM controls allow on-screen adjustments of brightness, contrast, H—position, V-position, HPhase, Center/Expand, Factory defaults, 5 languages, OSM position, OSM turn offtime, and Exit. . Compliant With stringent TC095 for safety and ergonomics. frr JD RES—Hy BET “9°21 Comuugieations Comtnifisiqn (ECClStatflnen! This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Fan 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation, This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation, Ifthis equipment does cause harmful interference to radio or television receptionr which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more ofthe following measures: - Reorient or relocate the receiving antenna. - increase the separation between the equipment and receiveri - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Warning: Use only shielded cables to connect l/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Checking the package contents Make sure the following items are included in the package. If any thing is missing or damaged, contact your local supplier: MicroScan 5T/6T LCD monitor Power cord Video cable Audio cables(x 2) USB cable WinPortrait soflware driver omewwe Connection to the mains install the ports in connector compartments in the rear edge of the monitor and connect them to your computer or multimedia accessories ] . Turn off the power of your computer and other deVices. 2 Connect the video signal cable 6) to the 15»pin connector ofthe Video port in your computer as well as your monitor 3, With the monitor switched off, attach the power cord Q to the monitor and then to a grounded power outlet. 4. Connect the audio cables (0 one end to the rear of your monitor and the other end to the back of your PC. The LCD monitor comes with a Stereo type audio cable which is only compatible with the Stereo sound card in your system, Ifyour PC does not have a stereo sound card, the integrated microphone of the monitor will not operate a fine tone as it should be A mono adapter is necessary to be plugged into the end of audio cable connecting to your PC. In that case, you will get a complete mono audio system. Otherwise, it is reconnnended to install a stereo type sound card into your PC. 5. Connect USB cable ® to the corresponding icon and the other end to your PC. 6. Tum on the monitor and computer. 7 If necessary, adjust the Front panel controls accordingly to your personal preference. WinPortrait Software Setup You must install the sottware driver that comes with your MicroScan 5T/6T LCD monitor for monitor landscape and portrait orientation. The MicroScan ST/GT monitor will be compatible to selected graphics cards. If you find trouble with installation, please notice your local dealer or simply get on web for update information at httpz/lwwwportraitcom/ or download driver at ADI‘s website wwwadicomtw, To rotate the front panel, you must first click on the WinPonrait icon located at the System Menu Start bar to activate the software, lift the panel up to its maximum position and then tum the panel gently clockwise to portrait position. Location of Controls l Activates the OSMm (in-screen display menu. Selects a parameter for adjustment Save the adjustment and return to the Main Menu Scrolls down the highlight bar and decreases the value of a parameter. Scrolls up the highlight bar and increases the value of a arameler. The microphone is located above the screen on the panel The stereo speakers are located to the monitor stand, below the paneli You may connect an extemal microphone or speakers to your MioroScan 5T/6T and simultaneously enjoy the sound system on the built-in and extemal audio systems. OSM (On-Screen Menu) Adjustment Controls Step 1: Press Menu key to activate OSM tun-screen display. Step 2: Press <+> or <-> key to scroll the highlight bar up or down the r Main Menu. Step 3: Press Menu key to enter into the secondary menu Main Menu -(Down) *(Up) ,, r H ' hh' hi 1; fiQfififib-qas 1g g ar 0 Contrast C91 Horlzontal Position 6 Vertical Position Horizontal size [L Phase Q Center/Expand 1}? Factory Delaults 05 5 Languages [1 oso Position X 050 turn efltime Resolution E Exit —’ 800 x 500 Ht35r8K V+60 Fii‘fi‘eififiw ' DEERE 7 Brightness Q {6:- Adjusls the overall image and background brightness level. Contrast o 0 Adjusts the image brightness in relation to the background Horizontal Position [Q @ Moves the screen horizontally lefi or right, Venical Position 9 g Moves the screen vertically upwards or downwards Increases or decreases horizontal width 0 the screen. Adjusts VGA H-sync, Selects English, French, Italian, German and Spanish for OSM language display on your own preference. OSM Positiun position OSM turn all lime ls 30 60 120 The time ofthe OSM staying art—screen Exit pg n Quits the OSM, The bottom line of the OSM shows the current resolution of the monitor and status of Horizontal sync and Vertical sync. To Adjust the Secondary Menu Settings: Brightness: Use <+> or <-> key tn increase or decrease the parameter of brightness of the screen. <_> key to Brightness - <+> key to decrease increase -—:|+ 50 Contrast: Use <+> or <-> key to increase or decrease the parameter of contrast of the screen. ——:+ 50 Horizontal Position: Use <+> or <-> key to move the screen to the right or to the lefl, ID Horizontal Posltlon [31 ———_—1+ 50 Vertical Position: Use <+> or <-> key to move the screen up or down. 9 Venlcal Fosltlon @ Horizontal Size: Use <+> or <-> key to increase or decrease the size of the screen. -—:+ 50 Phase: Use <+> or <-> key to adjust the phase of the screen. The recommended resolution for better quality image is 1024 x 768. Adjust Phase to reduce on—screen jitters and blur Center/Expand: Press
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2001:05:12 13:38:15 Producer : Acrobat Distiller 4.0 for Windows Modify Date : 2001:05:12 13:38:16-04:00 Page Count : 15EXIF Metadata provided by EXIF.tools