ADI TD-521 LCD MONITOR User Manual USERS MANUAL OF EUT

ADI Corporation LCD MONITOR USERS MANUAL OF EUT

USERS MANUAL OF EUT

Download: ADI TD-521 LCD MONITOR User Manual USERS MANUAL OF EUT
Mirror Download [FCC.gov]ADI TD-521 LCD MONITOR User Manual USERS MANUAL OF EUT
Document ID19991
Application IDsr2ohSlOwG2aiwUGtk6VZw==
Document DescriptionUSERS MANUAL OF EUT
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize14.74kB (184219 bits)
Date Submitted1999-01-19 00:00:00
Date Available1999-03-11 00:00:00
Creation Date0000-00-00 00:00:00
Producing SoftwareAcrobat PDFWriter 3.0 for Windows
Document Lastmod0000-00-00 00:00:00
Document TitleUSERS MANUAL OF EUT
Document CreatorMicrosoft Word
Document Author: Mike

Introduction
Thank you for purchnslng (he ADI LCD momtor. This MicmScan
5T/MicroScan 6T munimr combines a TFl‘ (mm film lransislor) liquid
crystal display panel structure and s hunlt-m backllghl Wllh invener for a
bcflm picture quality. ll is designed in meel llie needs of users for
ptrfm'mance, consistency, and oulsmndmg image quality through a
siremiliried develnpriienl process in which pivoting fimclwnnlity pmvides a
variety ofcapabilityv
Features
Hull-l the l4eiiieh (Mlcl’oScan ST) and 15-lnch (MiemSean 6T)
TFT active matrix calm liquid cryslal displays have a XGA
resulufiun mf1024 x 768 pixels w-th 256K colon
Viewmg angle is approximalely 120 degree liarimnml and no
degree vertical
The VESA DPMs-eornpliani power—saving future nulomalzenlly
powers den the monimr afier B pcrind uf lnacllvlly.
Analog ms signals. Synchronous signals (Hsync, Vsyne),
Mum-scan functions ofXGA 1024 x 768, SVGA 800 x 600. VGA
640 x 480, 720 x 400 and 640 x 350 far 3 higher level or graphics
perferrrrenee,
Pivoling capability enables the momlor lo male 90 degrees.
A built-in microphone and speakers feature to complete audlo
syslen-l,
A built-in USB hub Wllh 4 dnw‘nslream pens and l iipslream port
alllrws to connect mulliple device hnkrups.
OSM cantmls allow on-screen adjuslmcnls of Auto Adjust.
Englilmzss, Conlusl, Colon H Posm'lm. V Posm'm'l, Clock, OSD
Positiun, Languages, Factory Presei, Cancel. Save and Exit
Compllan! Wlth smngcnl KOQS for safety and ergonomics.
FCC ID I’bfl-STD—Sll
Checking the package contents
Make sure lb: following Items are included m the package, Ifany unng
is nnssmg m damagcd, Contact your luvs] supplier:
MlcroScan 5T/6T LCD monitor
Powcr cord
Vldeo cable
Audio cabchx 2)
USB cable
WmPDrfl’ml sofiwm dn’vcr
msnf-sdsvr
Connection to the mains
Install the pans m wnncctbr compartments m the rear edge of me
manner and connect them n) your Computer or mulumedia accessories.
1, Turn offth: power of your compum and nllrsr dcvlccs,
2. Connect the vidm signal cable @ lo the 15-pm conneclnr of 1h:
video pun in your compulcr as well as your monitor.
3, Will-l flle monitor swlmhcd offl attach the power cord ® lo “I:
mnnnur and then to a munded puwer outlen
4. Connect the and") cables G) one and ID the war of your monitor and
the other and lo lbs back of your PC. The LCD mammr comes with
a Stereo type oudro cable whlch 15 only cnmpanbls wilh Ihe mono
mlcmplmne curd m your system. If your PC does not have a some
sound card, the lnlegrsled mlcmphlme of the memo: wfll not
opmlo a fine tune as ll should be. A mono udopler is necessary to
be plugged lnlu the and or audxo cable cunneclmg |o your PC. ln
that case, you will get a complete mom) audlo system Otherwisq n
is moor-amended h) u-lslxll a menu mlcmphone can! mm your PC.
5. Cal-meet USB cable ® lo the corresponding icon and the other end
10 your PC
6. Turn 011 01: monitor and compuler.
7. If necessary, adjust file ‘fionl pane] commls accoldingly lo your
personal preferencel
Winl’ortrait Software Installation Guide
You must msmll the software dnver dial comes with your MicmSm
smr LCD momlm for manner landscape and portrait orientation
Sal-lip steps
ll Insert Ihe disk labeled WinPom'ait to the flappy drive on your PC.
Z Click on START butwn at the System Menu Start bar whlle you
are in the Windwws cnvimnmm! and choose 
3. The RUN analog box should now appear on the men. A! the
prompt, type ale following:
. A'\Dlsk l (A: your floppy an“), and then press .
4. Cram: 5 fulder name to be saved for WinPoru'ail suflwam 1“ hard
drive. And press .
5. chm1 step 3 and 4 for Disk 2 and Disk 3 installztmn. Use
 button fvr mslallation and cllck  lo quit
Ihe Wiannm Setup Mmu dialog box.
9 Than You wlll be asked In restart your computer Clxck <0K> IA)
us'arl your PC. You have to restart the compmer in Unit: m
llallze WmPonnil. Otherwise, Wmdows will nol aclwale
WmPomu soflware until the next time your start Wmduwe,
NOTE: You must have a Windows 31. NT, Windows 95 m above to
operate WinPom'mt. ~
To rome Lb: fmm panel, you must first click rm the WmPorlrait icon
' located at the System Menu Stan bar to actlwle the soflwarc, lifi
lh: panel up 10 ns maxlmum pcsmon and lhen mm the panel gently
clockwlse to prmrmt posmun.
The MicmScan ST/ST mentor will he eumuutrble lo selectcd gravhlcs
cards. If you fmd trouble with mstxllation, please nouce your local
deuler or simply get on web for updsle mfcrmation at
httpz/hvwwporh‘xitoom/ Ur download dnver at ADl‘s website
wwwodremtw.
Location of Controls
Dacrlpllol
l Aeliveres the OSD on-scmm display menu,
2 Seleers a parameter for adjuslmcnl
3. Save Lhc «human and rerum m Lhc len
Menu.
1. Actlvatcs me 051) err-screen duplay menu,
2 Scrolls duwn xhe highlight bar and decreases Ihc
value ola paramcta.
l. Atlivntes (he OSD all-semen dlsplay menu.
2. Scrolls up |l|e lughllghl bar and mcmucs rlre
vrlue oft: parameter,
The mrcmphune |S lecalsd above the scrm on the panel. The slereo
speakcrs are located 10 me momlcr sland, below me panel You may connect
an cxlcmzl mlcmphane or speakers w your MrpmSearr 5T/6T zml
simullznmusly sum the sound sysrem on rlre bullwn and exlema] audlo
syslms
Adjusts the ovesall lmxge and backglound bngbmess level.
Adjusts tlle unage bllghmess m relation us the background.
Automaticslly sets the H Pasltlan, V Position and Clock.
nriznnlul Polilinn
Moves the screen llonznntally len or rlghL
Verfiul Pulfian
Move: the screen vertically u'pwaxds or downwlm‘ls.
Clnelr MJME llrs function only when cluneberishes are blurred.
osn Posifl'nn Displays the use in your preference poslusn.
Lingulgu Selects Engllsh, French llalran. German and Spanish fa
osn language display on your own pteference.
Fulary Pratt Reset: the monster in default as factory settings.
ancel
Qurn without saving rhe ndjustmenls and laws like OSD
menu.
Sue and Exit
Saves the adjustments and qulls the OSD menu.
The bottom llne vf the OSD shows Ihe current resoluuon of the monitor and
status of Vertical sync. If n shows unsupported mode, please refer to the
monimr Presel made
Secondary Menu Settings:
Brlglltness: Use <+> or <-> key to increase or decrease the numencal level
ofbrighmess omre screen.
Contrast: Use <+> or <—> key (41 lncrease or decrease the numerical level of
cnnuasl of the screens
Color: Use <+> or <-> key to scroll the hlghllghl bar up or dawn the Cular
menu.
Adjusts the ovesall lmxge and backglound bngbmess level.
Adjusts tlle unage bllghmess m relation us the background.
Automaticslly sets the H Pasltlan, V Position and Clock.
nriznnlul Polilinn
Moves the screen llonznntally len or rlghL
Verfiul Pulfian
Move: the screen vertically u'pwaxds or downwlm‘ls.
Clnelr MJME llrs function only when cluneberishes are blurred.
osn Posifl'nn Displays the use in your preference poslusn.
Lingulgu Selects Engllsh, French llalran. German and Spanish fa
osn language display on your own pteference.
Fulary Pratt Reset: the monster in default as factory settings.
ancel
Qurn without saving rhe ndjustmenls and laws like OSD
menu.
Sue and Exit
Saves the adjustments and qulls the OSD menu.
The bottom llne vf the OSD shows Ihe current resoluuon of the monitor and
status of Vertical sync. If n shows unsupported mode, please refer to the
monimr Presel made
Secondary Menu Settings:
Brlglltness: Use <+> or <-> key to increase or decrease the numencal level
ofbrighmess omre screen.
Contrast: Use <+> or <—> key (41 lncrease or decrease the numerical level of
cnnuasl of the screens
Color: Use <+> or <-> key to scroll the hlghllghl bar up or dawn the Cular
menu.
Ame Balance
Auto Balance
Balance
Red
Green
Blue
Main Menu
11 W111 anmmmcally ndjlln the cnnmsl lcvnl of KGB and
does no! support rcsolufiun or Mac 832 x 524 at 70Hz.
Balance (R-G-B)
Adjus‘s the “1m of RGB pmpomonally.
n Adjum me lcvzl ufcolur Red
G - Adjusls the level ofculm Green. ~
1; Adjusts the level of color Blue.
Main Menu Remms m Mam Meme
Notes: nepammery afRGB varies depend upon me videu madeyau
are using.
Autn Adjust: Use <+> or <-> key In automatically 3:1 H Posiliun, V
Position, Clock. Clock Phase and Contrast.
Hnrimntal Poddnn: Use <+> or <,> key In increase or decrease the
dam by movmg the screen to the “gm at co the left
Verde-1 Polilion: Us: <+> m <.> key to incrwsc or decrease the data by
moving the semen up or dawn
Clock: Us: <+> ur <>> key to scroll the lughllghl bar up or dnvm the Clock
menu.
Clock 1320
Clock Phase 26
Patterns 0
Main Menu
Clock mum 1h: fimcnon only when charactcnsncs am blurred.
Clock Phase Adjusts ADC samplmg clock phnse.
Patterns Displays an bum-m test partems These am for (“my
wsnng only.
Mnln Menu Returns to Main Menu
Faclory Preset: All paiamezer settings will be reset m factory prcsct values
Lnngnnges: Press <+> of <.> key to move the hlghhghl bar up and down
the menu nnd choose a language by pressing  key Upon the
selccncm, me 0505 mm be displayed m that language, The languages
mclude Enghsh, French, Italian, Deutsch and Spnmsh.
OSD Fashion: Press  key to switch the OSD u) the posnmn you
ehonse from mne choices arm-screen menu positions
Cancel: ExiLs wnhout saving the changes
Save & Exit: When Save and Ex“ \s selected. any changes W111 be savcd
and then exit the OSD.
Power Consumption
The mnm‘wr comes wrth a power suvmg featuYe that camels the power
consumption of the manner, therefrom, you may put thc mornikrr into a
reduced power consumpnnn slate when 1! 15 not m use This femur: complics
wi'b hmh EPA‘s Energy Star requirements and European NUTEK/TCO’s
power managemcm guidelines, II conforms with Vrdeo Elccmmcs Slandard
Association (VESA) approved DPMS powerdown signalmg method. This
moniwr auwmalically cuts dawn power consumpliun of monitflr s=r whcn
not dawning Hsync or Vsync srgmls. Tins feature rs for V'EsA DPMS
compliant.
—__=§=
Input Voltage Power cnnsumplion (Watts)
110V Normal ‘ 4owuzo VAC)
Power saving 7 w (122 s VAC)
220 v Normal 40 w (220 VAC)
Power saving 7.2 w (232 VAC)
Preset Mode
The manner conlams 13 mm modes as follow:
Rewluflon Hariznnt-l Verlicnl Frgq.
Freq. (Uh) (Hz)
640 x350 31.25 70
720x400 4A 31.25 70
640 x 480 37,50 60
35.00 67
31.5 37.90 72 VESA
ll]
640x480 31.5 37.50 75 VESA
8m) x 600 36.0 35.20 56 VESA
40.0 37.90 60 VESA
50.0 48.10 72 VESA
49.5 46.70 75 VESA
832 x 624 57.29 49.30 74.6 Man
1024 x 768 65.0 48.40 60 VESA
56.50 70 VESA
60.00 75 VESA/CRUS
, 60.24 75 Mac
Specifications
ll
MieroScnn 5T MicmScan 6T
Picture panel
Resolution
Dlsplay area (H x V)
Vlew angle
lnyut signals
Max. virleo inpul
bnmlwidll:
Display color
Signal system
Luminance
Contrast ratio
Response time
Front panel controls
DSD menu euniruls
l4vincl1 diagonal 15-inch diagonal
viewable screen viewable screen
TFT (Ihin film transistor) naive matrix,
color liquid crys|a1 display, RGB interface
XGA [024 x 768
285 mm x 214mm 304mm x 228 mm
110'(v) 120-01)
Horizontal: 31.5 to 60 kHz
Vertical: 56 to 75 Hz
80 MHz
262 K
Analog RGB Signals
200 (xi/m1 (Iyp.)
150: 1 (min) 200 , I (min)
20ms (1pr
Menu, — (decrease/down), + (increase/up)
Auto Adjust, Brightness, Contrast. Color,
12
Input connectors
Multimedia speaker set
Power snllrce
Power consumption
Power saving
PnP tumpatibility
USB hub
Safety standards
EMI
Ergonomics
Dimension (H x v x D)
H Position, V Position. Clock, OSD
Position, Languages, Factory Preset,
Cancel, Save and Exit
15-pin D-sub Type
Speaker/ Microphone jack, AC IN, USB
hub
Audio oulpul: 1.5w x z
90 -240 VAC
40 walls
VESA DPMS standard
EPA/Energy Star complianl
VESA DDC 2B slandargis compliant
Built-in a! the real-panel
Locally powered hub wilh 4 downstream
pens mi 1 upsmeam pon
UL, CSA, TUV/GS, NORDIC
(NEMCO, SEMKO. PIMKO, DEMKO)
FCC Class B, CISPR 22, VCCI
CE, BCIQ, RF543
ZH 1/618, 1509241-3, TCO95
3475 x 251 x 20mm 368.5 x 275.5 x 20mm
I3
Net weight 56 kg 6 kg
‘Deflmrlenlm wdw (mural/«hard med
Nu "CE:
DUE 710 mm mud or CONTINUUUb mam/Cr uwmymmr, his way:
SPECIFICATIONS ARE SUBJECTS!) m CHANGE WITHOUI NOTICE ADI mkpmu now
smu. Nor IIE mus FUN TECHNICAL ax EDITORIAL ERRORS OR oM/ssloNs
(DNTAINED "new mp (”011 IN(IIJF,NT4L on (UMs‘EQUENr/Al. DAMAGES
WmmuEVER RESULTING FROM FURNISH/NS, PERFORMANI‘I: on uxs OF mlr
Mum/u.
I4

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 14
Creator                         : Microsoft Word
Create Date                     : 1999¦~1¤ë19¤é 05:51:17 PM
Title                           : 
Author                          : Mike
Producer                        : Acrobat PDFWriter 3.0 for Windows
Subject                         : 
EXIF Metadata provided by EXIF.tools
FCC ID Filing: BR8TD-521

Navigation menu