ADview Technology IL-1515AV 15" LCD Monitor User Manual EMISSION TEST REPORT

ADview Technology Co., Ltd. 15" LCD Monitor EMISSION TEST REPORT

users manual

Test Report No.: GETEC-E3-03-010 FCC Class B Certification APPENDIX H : USER’S MANUAL EUT Type: 15” LCD Monitor FCC ID : QAEIL-1515AV
INTRODUCTIONFCC Compliance Statement .......................................................................................................... iSafety Instructions ................................................................................................................................... iiiGeneral Information ............................................................................................................................... 1Equipment Check list ............................................................................................................................ 2Monitor Features ....................................................................................................................................... 3GETTING STARTEDInstallation ........................................................................................................................................................ 4Control Buttons ........................................................................................................................................... 5Monitor Setting Using the OSD Menu .................................................................................. 7ON-SCREEN CONTROLSMenu Descriptions ................................................................................................................................... 8REFERENCEPower Management ............................................................................................................................... 10Preset Operating Modes ................................................................................................................... 11Pin Assignment ........................................................................................................................................... 12Specifications ............................................................................................................................................... 13Troubleshooting ......................................................................................................................................... 14
INTRODUCTIONINTRODUCTIONFCC COMPLIANCE STATEMENTNote:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against radio frequency interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy. If not installed and used inaccordance with the instructions, it may cause interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does causeinterference to radio or television reception (this can be determined byturning this equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment to an outlet on a circuit different from that towhich the receiver is connected.CAUTION TO THE USER:The Federal Communications Commission warns that changes ormodifications to the unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions. The user may find the Federal Communications Commission booklet, How to Identify andResolve Radio-TV Interference Problems, helpful. This booklet isavailable from the U.S. Government Printing Office, Washington, D.C.,Stock No. 004-000-00345-4.NOTICE OF COMPLIANCE WITH CANADIANINTERFERENCE-CAUSING EQUIPMENTREGULATIONSi
INTRODUCTIONINTRODUCTIONFCC COMPLIANCE STATEMENTINTRODUCTIONINTRODUCTIONDOC COMPLIANCE NOTICE:This digital apparatus does not exceed the Class B limits for radio noiseemissions from digital apparatus set out in the Radio InterferenceRegulations of the Canadian Department of Communications. SAFETY INSTRUCTIONSO HandlingDue to its fragile glass panel, this monitor must be handled withcaution and not be exposed to impact or shock.Never touch the display area or rub it with a hard object or tool, as thepanel is easily scratched.O CleaningThe display area is sensitive to scratching. Do not use ketone-typecleaners (i.e. acetone), ethyl alcohol, toluene, ethyl acid or methyl chloride to clean the panel. Doing so may result in permanentdamage.Water, IPA (Iso Prophyl Alcohol) and Hexane are safe cleaners.Do not allow oil or water to penetrate the display, this will causestaining and discoloration.Avoid getting food particles and fingerprints on the display area at alltimes.O StorageStore the monitor in a dark place away from sunlight and ultraviolet(UV) radiation, this may cause air bubbles to develop within theglass panel.Do not store the display in temperatures higher than 400C/1040F orhumidity greater than 90%. Avoid condensation.ii iii
INTRODUCTIONINTRODUCTIONSAFETY INSTRUCTIONSINTRODUCTIONINTRODUCTIONO Caution1. Do not open any covers on the monitor. No user serviceable parts are inside.2. In an emergency, disconnect the AC power plug.3. To avoid electrical shock, disconnect the power cord from the monitor before connecting the signal cable to the computer.4. Keep away from liquids and flame. Do not immerse this monitor in water or any other liquid. Do not use this device in excessively hot conditions.5. Handle the power cord with care. Do not bend the power cordexcessively or place heavy objects on it. Do not use a damaged power cord, doing so can result in fire or electrical shock hazards.When disconnecting the power cord, always grasp the plug, not the cord.6. The liquid crystals in the display panel contain several irritants. If the panel is damaged or broken, do not allow the liquid to come in contact with skin, eyes, or mouth. If you come in contact with the liquid, flush the affected area with running water for at least 15 minutes, then consult a doctor.7. Handle this monitor with care when moving it. When lifting the monitor, support it with one hand holding the stand, and one hand holding the LCD screen.8. Always disconnect the power cord when moving this monitor.9. Do not lay this monitor in a horizontal position when operating.GENERAL INFORMATIONYour new LCD monitor incorporates the latest state-of the art color LiquidCrystal Display (LCD) technology providing a wider viewing angle with higher contrast ratio.Your new LCD monitor has many advantages : safe from electromagneticwave, lights, sharps and slims. This makes the monitor extremely suitable in the environment of administration, transportation systemresearch, etc.Your new LCD monitor is designed for Analog and DVI input.Your new LCD monitor does not emit any X-ray radiation and the magneticemission greatly reduces the eyestrain. Moreover, our On Screen Controls on the side of the panel provide flexibility with simple controls.You can use these controls to adjust the display as you desire.Your new LCD monitor incorporates an active TFT module. It has a 1024x 76 pixel resolution, high contrast, wide viewing angle and colors up to 16.2M.iv 1
INTRODUCTIONINTRODUCTIONEQUIPMENT CHECK LISTINTRODUCTIONINTRODUCTIONBefore operating your display, please check to make sure that all of theitems listed are present in your package: Accessory Kit Power RequirementsThe monitor is equipped with an auto-sensing power supply for voltage ranging from 100-120VAC/200-240VAC, 50/60Hz. Confirm the power rating of the AC Source before you plug the AC cable to the wall outlet.MONITOR FEATURES* Supports Analog and IBM compatible PC. * Supports DPMS for monitor power management* Support DDC2B* On Screen Control : Brightness Contrast H/V Position H-Size Phase ColorSelect Auto Reset Language OSD Adjustment Exit.* Built-in color active matrix TFT (Thin Film Transistor) Liquid Crystal Display (LCD) that uses amorphous silicon TFTs as a switching device.* Built-in Audio Amp. and internal Speaker : 2W+2W(at 1KHz)* Resolution : up to 1024 x 768* Color : 16.2M Color support.* Pixel pitch : 0.297mm* Scanning frequency : 30kHz ~ 60kHz(H), 55Hz ~ 75Hz(V).* Universal power supply : AC 100 - 240V allowed.* Power consumption Normal : 25 Watt Max.Off : 2.5 Watt Max.* Outside dimension : 346mm(W) x 345.5mm(H) x 14mm(D)13.6"(W) x 13.6"(H) x 5.5"(D)* Weight (net) : 3.0kg (6.6 lbs.)2 3AC to DC Adapter Power CordSignal Cable(D-SUB)LCD MonitorManualAudio In Cable
GETTING STARTEDGETTING STARTEDGETTING STARTEDGETTING STARTEDCONTROL BUTTONS5INSTALLATION4 Follow these steps to install the monitor1. Before you connect the cables, make sure the monitor and system unit power switches are OFF.2. Plug the 15-pin signal cable between the rear of your Monitor andsystem. The adapter may be required for certain Apple Macintoshcomputers. Tighten the two screws on the cable connector.3. Plug the Audio Cable between Audio input Jack in the rear of yourmonitor and audio output of your system.4. Connect the power cord to the inlet socket which is located at the AC Adapter. Connect the plug into an AC wall outlet.5. Connect DC Plug of AC Adapter to the DC Jack which is located at therear of your monitor.OSD Buttons : The OSD control keys are located on lower left of themonitor.((EEnntteerr)) a. No OSD : This button will enable the main OSD menu.b. Main OSD menu : Press this button to enter to the selected OSDcontrol menu.c. Cotrol OSD menu : Swap the control item.oorr ((UUpp//DDoowwnn)): Use these buttons to increase or decrease each value.a. No OSD : Audio volume control menu will be shown.b. Main OSD menu : Use these button to move up (or down)the OSDselection menu and adjust the attribute of the monitor while in OSDmode.((AAuuttoo)): No OSD : This button can be used to 'Auto Adjustment' function.(Size, Phase, and Color)
ON-SCREEN CONTROLSON-SCREEN CONTROLSMONITOR SETTINGS USING THE OSD MENU7CONTROL BUTTONSGETTING STARTEDGETTING STARTED6Button Description :1. : Display On Screen Control menu.Access the control menu.2. : Move selected icon up to select one of the controls.Increase the control value.3. : Move selected icon down to select one of the controls.Decrease the control value.4. : Do Auto function. (Press and hold this button for two seconds.)MENU ( )You use this button to switch the OSD menu on and to select thehighlighted function.DOWN ( )You use these buttons to mark the symbol for a function and can thenmake the settings for the selected function.UP ( )The buttons allow also the volume adjustment while audio playback.AUTOWith the AUTO button you can start the auto-adjustment for the currentresolution. To do this, you must press the button briefly. During the auto-adjustment the display Auto Adjusting is shown.VOLUMEBy pressing the DOWN/UP buttons directly you can adjust the volumewithout pressing the MENU button before.You can use the buttons on the control panel to set the screen display via anintegrated OSD menu (On-Screen-Display). The OSD menu is available in different languages (default setting: English).MENU DOWN UP AUTO POWER123
ON-SCREEN CONTROLSON-SCREEN CONTROLSMENU DESCRIPTIONS9MENU DESCRIPTIONS8Press the MENU button to activate the OSD menu.The main menu appears on the screen with icons for the setting functions.The last icon set is marked (in this case BRIGHTNESS). • If necessary, use the DOWN or UP button to mark an other icon.• Press the MENU button to activate the highlighted icon.• Use the DOWN or UP button to make the desired setting.• Select the EXIT symbol to exit the OSD menu.All changes are stored immediately.TToo sseett tthhee OOSSDD mmeennuu,, ppeerrffoorrmm tthhee ffoolllloowwiinngg sstteeppss::ON-SCREEN CONTROLSON-SCREEN CONTROLSSetting the brightness of the display (BRIGHTNESS)Setting the contrast of the display (CONTRAST)Shifting the picture to the left or to the right (H.POSITION)Shifting the picture up or down (V.POSITION)Adjusting the horizontal size (H.SIZE)Setting picture definition and eliminating picture interference(PHASE)Adjusting the colours (COLOR SELECT)Set one of the preset colour temperaturesor select the colours RED, GREEN and BLUEto define the colour ratios.Setting colour temperature to COOL (more blue)Setting colour temperature to WARM(more red)Performing auto-adjustment (AUTO)Activating the factory settings (RESET)Setting language for the OSD menu (LANGUAGE)Setting position of the OSD menu to screen (OSD ADJUSTMENT)Exiting the OSD menu (EXIT)All possible adjustments of the monitor using the OSD menu are described inthe following.
REFERENCEREFERENCE1110POWER MANAGEMENT PRESET OPERATING MODESLED INDICATOR (POWER MANAGEMENT ACTIVE)The power management feature is comprised of two stages : On or Out Of Range (Green), Off (Green blinking).In the off mode, all circuitry in the monitor is shut down, except for a lowpower detection circuit. This circuit allows the monitor to wake up when the mouse is moved or a key on the keyboard is pressed.Power ModeNormalOut Of RangeOffOffOffPulsePulsePulseNo PulseNo PulsePulsePulseNo PulsePulseNo PulseActiveActiveBlankedBlankedBlankedGreenRedRedRedRedH-Sync V-Sync Video LED ColorREFERENCEREFERENCEThe picture position and size have been set to optimum values at thefactory for the operating modes listed above. Depending on the screencontroller used, it may be necessary to adjust the display position and size. Ifyou need to do so, refer to the section entitled "Changing the monitorsetting" below.For ergoncomic reasons, a screen resolution of 1024X768 pixels isrecommended. Because of the technology used(active matrix) an LCDmonitor provides a totally flicker-free picture even with a refresh rate of 60Hz.HHoorriizzoonnttaall ffrreeqquueennccyyRReeffrreesshh rraatteeSSccrreeeenn rreessoolluuttiioonn31.47kHz31.47kHz37.86kHz37.50kHz35.16kHz37.88kHz48.08kHz46.88kHz48.36kHz56.48kHz60.02kHz70.00kHz60.00kHz72.00kHz75.00kHz56.25kHz60.00kHz72.00kHz75.00kHz60.00kHz70.00kHz75.00kHz720X400640X480640X480640X480800X600800X600800X600800X6001024X7681024X7681024X768
REFERENCEREFERENCEREFERENCEREFERENCESPECIFICATIONS13PIN ASSIGNMENT12VGA Connector(Cable Side) VGA CONNECTORPOWER JACK(Monitor Side)PPiinn11PPiinn22PPiinn33 PPiinn44PPiinn55 PPiinn66 PPiinn77 PPiinn88 PPiinn99 PPiinn1100 PPiinn1111PPiinn1122 PPiinn1133 PPiinn1144 PPiinn1155 RedGreenBlueNo ConnectionGroundRed GroundGreen GroundBlue GroundNo ConnectionGroundGroundDDC SDAHorizontal Sync.Vertical Sync.DDC SCL1122GroundDC+12V inputLCDViewingAnglesContrast RatioLuminance of WhiteCompatibilityRefresh RateConnectorsPowerDisplay AreaOperatingStorageConditionsDimensionWeightTypeColor FilterColorsGlass surfaceLeft / RightUp / DownTyp.Typ.PCMax.Input SignalPowerAudioInputOutputConsumptionMax.TemperatureHumidityAltitudeTemperatureHumidityNet15” diagonal viewable screenTFT (Thin Film Transistor), ActiveMatrix Panel, 0.297 pixel pitchR,G,B vertical stripe262KAnti-glare hard coating60° / 60°40° / 60°400:1250cd/m2IBM XT, AT, 386, 486, Pentium orPS/2 and compatibles(from VGA up to1024 x 768 @ 75Hz NI.)1024 x 768 @ 75Hz NI(60Hz for optimal display)15-pin D-SUBJack Type DC+12V In Stereo inputAC 100-240V 50-60HzDC 12V25 watts (Maximum)304mm(H) x 228mm(V)32°F to 104°F(0°C to 40°C)20% RH to 80% RH (no condensation)To 10,000 feet-14°F to 104°F (-20°C to 40°C)5% RH to 90% RH (no condensation)346mm(W) x 345mm(H) x 182mm(D)13.6”(W) x 13.6”(H) x 7.2”(D)3.0Kg (6.6 lbs)
REFERENCEREFERENCEREFERENCEREFERENCETROUBLESHOOTING15TROUBLESHOOTING14 No power. Flip the power switch ON. The Power LED turns on. Make sure AC power cord is securely connected to a power outlet. Power on but no screen image. Make sure the video cable attached with this monitor is tightly secured to the video output port on the back of the computer. Adjust the brightness and contrast. Image is unstable, unfocused. Use “AUTO-TUNE” to adjust automatically. If the image is still unstable after “AUTO-TUNE” processing, please adjust “PHASE” manually to get image focused. Check whether the resolution or refresh rate in windows display settingis beyond supported range(please refer to the specification of supported mode). Flickering. Not enough power is being supplied to the LCD Monitor. Connect the LCD Monitor to a different outlet. If a surge protector is being used, there may be too many devices plugged in. See Timing Guide in this manual with a list of refresh rates andfrequency settings showing the recommended setting for the LCDMonitor. Wrong or abnormal colors. If any colors (Red, Green, or Blue) are missing, check the video cable to make sure it is securely connected. Loose pins in the cable connector could cause a bad connection. Connect the LCD Monitor to another computer. Check the graphics card for proper sync scheme (or sync polarities) to match the LCD Monitor’s specifications. Double (split) screen image. Make sure your graphics card is set to Non-Interlaced mode. Entire screen image rolls (scrolls) vertically. Make sure the input signals are within the LCD monitor’s specifiedfrequency range. (Maximum: VESA, MAC 1024 x 768@75Hz) Connect the video cable securely. Try the this Monitor with another power source. Control buttons do not work. Press only one button at a time. No Sound Make Sure the audio cable is properly connected between this monitorand your system. Check the audio volume of this monitor and your system.The LCD contains over 2,359,296 thin-film transistors (TFTs).A small number of missing, discolored, or lighted dots on the screen is anintrinsic characteristic of TFT LCD technology and is not an LCD defect.If you display a fixed pattern for more than 10 hours, its image may remain onthe screen in overlap mode when you display something else.ABOUT THE LCD
17MEMO16MEMO

Navigation menu