AEE Technology AEEAP110001 Aerial photography equipment User Manual
Shenzhen AEE Technology CO., LTD. Aerial photography equipment
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2732194 |
| Application ID | pB2jwgM52gjRqAa4dHE6EA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 143.78kB (1797302 bits) |
| Date Submitted | 2015-08-31 00:00:00 |
| Date Available | 2015-08-31 00:00:00 |
| Creation Date | 2015-08-18 10:03:21 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2015-08-18 10:03:21 |
| Document Title | AEEæ ‡å‡†è‹±æ–‡å¿«é€Ÿå…¥é—¨æ‰‹å†Œ 410x280mm 105g铜版æ£å彩色å°åˆ·+2折 |
| Document Creator | Adobe Illustrator CS6 (Windows) |
| Document Author: | Administrator |
Remote control and Wi-Fi Repeater Description
AP11
Remote control
(U.S. Mode)
Antenna
Quadcopter Direction
("
" indicates nose direction)
Wi-Fi Repeater
UP
Smartphone Holder
UP
Repeater Base
Calibration switch S2
Speed control switch S1
Power Indicator
Status Indicator
Angle control switch S3
S2
S3
F M
DOWN
DOWN
Flight mode switch S4
GPS
NRM
S1
S4
Photo Shooting &
Video Recording Indicator
TURN
LEFT
Strap Hole
Left Joystick
Right Joystick
Airborne Video
Recording Button
Video Stop Button
Airborne
Shutter Button
TURN
LEFT
TURN
RIGHT
TURN
RIGHT
Remote Control
Power Switch
FORWARD
AP11
FORWARD
BACK
LEFT
RIGHT
BACK
Hook open/close button
Return button
Disclaimer
Please read this disclaimer carefully before using the product of Quadcopter. This product is not suitable for people under the age of 18. By using this
product, you hereby agree to this disclaimer and signify that you have read them fully. You agree that you are responsible for your own conduct and
content while using this product, and for any consequences there of. You agree to use this product only for purposes that are proper and in accordance
with the terms and any applicable or guidelines AEE may make available.
1. Shenzhen AEE Technology Co., Ltd. reserves the right of final interpretation of this disclaimer.
2. Any part of this disclaimer is subject to change without prior notice.
3. This disclaimer is available in multiple languages. In case of any discrepancy, the Chinese version shall prevail.
4.For more detailed or latest product information, please visit www.aee.com.
Power Indicator
Power Switch
Wi-Fi Indicator
Charging Port
(mini USB port)
Pairing Button
Repeater Base
Lock Screw
LEFT
RIGHT
Note: The Remote Control is set to U.S. mode by default.
[ 1 ]
Taking off and Landing(Outdoors)
[ 2 ]
Taking off
1) Place Quadcopter (with full power battery) on a flat and open ground,
and ensure Tail Indicator faces toward you.
2. Turn on the remote control, repeater and camera and enable the Wi-Fi
function of the camera in sequence; last, turn on the aircraft (Do Not turn on
the aircraft before the Wi-Fi function of the camera is enabled);
S1:
S2:
S3:
S4: GPS
3) Be sure the Remote control is set exactly as the figure below.
4) Starting motors: toggle the left joystick to left bottom corner and toggle right joystick to right bottom corner at the mean time to start motors. Once
the motors start please release the joysticks immediately.
5) Push the left joystick slowly, then Quadcopter take off. Please refer AEE Quadcopter User Manual for more details.
Note: The motors can not be started until GPS signal is ready (Tail Indicator (green) remains on).
1. Upon startup, the airborne camera and the repeater will pair with each other. Please wait for about 30S to ensure that pairing is completed, so
that the airborne camera can record videos normally.
2. After the aircraft is powered on, the aircraft and the PTZ will start self-test. Do not shake the aircraft or the PTZ at this moment; otherwise, the
aircraft and the PTZ will fail the self-test.
(The PTZ can be used only when the camera is installed; otherwise the PTZ may be damaged)
3. Before installing the camera onto the aircraft, it is suggested that the auto standby function of the camera should be disabled.
4. When the aircraft complete searching for GPS satellites, the tail light (green) will remain on. During flight, please do not turn the joysticks of the
remote control to a lower toe-out pattern, which will stop the motors.
[ 3 ]
GPS
NRM
F M
S1
S2
S3
S4
[ 4 ]
[ 5 ]
[ 6 ]
[ 8 ]
[ 9 ]
[11]
[ 7 ]
[10]
[12]
Landingďź
1) Slowly pull the left joystick to lower Quadcopter until it touches the ground(only on flat and open ground).
2) After landing, pull the left joystick to the lowest position and hold for more than 3 seconds until the motors stop.
3) Power off Quadcopter by sliding the switch to OFF.
4) Remove the battery.
5) Power off Remote control and Wi-Fi Repeater.
Important:
1) Control the flight height under your control during your first flight.
2) Do not stop the motors during flight, or it will cause the Quadcopter to drop without control.
[ 1 ] Propeller
[ 2 ] Motor
[ 3 ] Front Indicator
[ 4 ] Landing Gear
[ 5 ] Camera
[ 6 ] 3-Axials Gimbal
[ 7 ] Quadcopter Battery
[ 8 ] Tail Indicator
[ 9 ] Power Switch
[ 10 ] Rear Indicator
[ 11 ] Battery Level LCD Segment Display
[ 12 ] Battery Level Check Button
AP11 Quadcopter
Quick Start Guide
Download AEE App (iOS / Android)
To install the AEE AP App onto your
smartphone by scan QR code.
Preparing the Remote control
1) Load four AA batteries into the battery compartment.
Pay attention to positive and negative directions.
厢ćˇäşçť´ç
ĺž
厢ćˇć´ćš
Scan QR Code above
Remove the Buckle and
Install the Camera
Two types of cameras can be installed onto the aircraft
AP11:
1. AEE S50/S51/S60/S71/S70/OM51S/OM60S/OR60S/
OR71S/S40;
2. Gopro G3/G4.
Assembling Quadcopter Battery
1) Load battery into battery compartment in the correct
direction.
Quadcopter
Battery
1.Pull out the buckle of the gimbal in the direction:
You also can download the App from
the Google Play Store or the Apple
App Store.
2) Turn S1 to the lower position, and S2 and S4 to the
upper position:
Power on Quadcopter
Slide the power switch to "ON" to power on Quadcopter.
Note:The general indicator instructions are showed in the
following table. Please refer to the user manual for more details.
Tail indicator
Quadcopter
F M
Push the battery into the battery compartment in the right direction
AEE AP
Android 4.0 or above
S1:
S3:
iOS 6.1 or above
2) Ensure that the battery has been completely pushed in:
2.Install the camera onto the aircraft and fix the clip to the
camera reliably as shown in down to prevent the camera
coming offďź
Searching
completed
(remaining on)
WARNING
Front Indicator (green)
Rear Indicator (red)
1st Level low
-PDL
battery alarm Slow Blink(1s ON,1s OFF)
Slow Blink(1s ON,1s OFF)
2nd Level low
6OMPDL
Diagram of installation of PTZ USB cable
battery alarm Fast Blink twice per second Fast Blink twice per second
Remote Control Indicators
Functional
status
S2
Power indicator
Status indicator
Photo shooting
&video recording
indicator
After the battery is completely pushed in, a âclickâ sound will be heard,
Important: A continuous beeping(di,di,diâŚâŚ) sound
emitted from the Remote control indicates low battery voltage.
Please replace batteries immediately. Make sure Quadcopter
is powered off when replace the batteries of Remote control.
Compass calibration is required before first time use otherwise the system may not work properly, affecting flight safety. The
compass is sensitive to electromagnetic interference from other electronic devices, which can cause abnormal compass data
leading to poor flight performance or even flight failure. Regular calibration is required for optimum performance.
Do not carry ferromagnetic materials when calibrating the compass,such as keys and cell phones etc.)
Note: Calibration can begin until the Remote control and Quadcopter start up completely(powered on for about 20 seconds).
GPS
(The software mentioned herein only applies to S61
camera installed on the aircraft. For other cameras, the
app provided with each camera should be used.)
Switching on the Repeater
1) Toggle Repeater power switch to ON.
2) Wait until the Wi-Fi indicator blinks blue, indicating the
Repeater is communicating properly.
3) While using, ensure the Repeaterâs LED side faces you,
and ensure that visibility between the Repeater and
quadcopter is unobstructed, to obtain maximum
communication distance.
GPS
NRM
NULL
S1
S2
S3
S4
F M
S4
indicating that the battery has been fastened. If the battery lock is not
Power on
Remaining on
NONE
NONE
tightly locked, poor contact of power supply may be caused, which will
GPS OK
Remaining on
Green light
NONE
GPS searching
Remaining on
Blue light
NONE
affect the flight safety or result in take-off failure.
Compass Calibration
After the quadcopter powers
on(about 20 seconds). Swich S4 for
more than 5 times between GPS
and F_M mode. The quadcopter will
enter calibraion standby mode(the
tail light blinks fast).
Searching
satellites
(blinking slowly)
GPS
S1
Important: Before flight, please read all instructions
included in quick start guide, detailed user manual and other
useful information included in the package or the official
website.
NRM
Power-on
self-test
(remaining on)
S4: GPS
3) Slide power switch to ON position to power on the
Remote control. Then the power indicator(red) lights up.
After freguency-pairing between Remote control and
Quadcopter, the Photo shooting & video recording indicator
(green) lights up for 3s.
Compatible Mobile Devices
iOS (system version iOS6.1 or above): Applicable for iPhone
4s, iPhone 5, iPhone 5s, iPhone 5c, iPod Touch 4 and iPod
Touch 5. iPad 3, iPad 4, iPad mini and iPad Air can also be
used. Android (Systemversion 4.0 or above), Applicable for
mainstream models can be used.
of mobile devices.
S2:
Description
Important: Pressing the Battery Level Check button to
check the battery level. Please fully charge the battery if it
is less than two bars showed on the Segment Display.
Connecting the Camera
1. First, turn on the repeater and camera, and enable the
Wi-Fi function of the camera. (DO NOT turn on the aircraft
before the Wi-Fi function of the camera is enabled).
2. Wait for about 25s until the blue Wi-Fi indicator light on
the camera blinks. When the blue Wi-Fi indicator light on
the repeater starts blinking slowly (off for 3S and on for
0.3S), enable the Wi-Fi function of the mobile device. In
order to ensure signal strength, please place the mobile
device as close as possible to the repeater. Select
âAEE_AP ******â in the Wi-Fi list, and enter the password
âAEE12345â to join the network.
Note:In NRM mode, if the status indicator of remote control is blue,
indicating frequency-pairing of the quadcopter and the remote control
has been successful.
Assembling Propellers
1) Remove the 4 warning cards from motors.
2) Attach propellers with gray nuts to motor shafts without "P"
mark, and attach propellers with black nuts to motor shafts
with "P" mark.
3) Tighten propellers as per the appropriate locking direction.
0''0/
Toggle the joysticks to the position
as in the follow figure. Front
indicator (green) starts blinking
,Then release the joysticks.
Compass calibration command has
been sent successfully.
3) Run the AEE AP App on your mobile device. The App
interface appears on the mobile device as shown in the
figure below.
Rotate Quadcopter 360°
horizontally (2 turns)
Wi-Fi network
Rotate Quadcopter vertically (Nose leftward)until green lights off,
Put Quadcopter on the ground. Green lights up normally after light
! #$ !
!%
Rotate Quadcopter 360°
vertically
2 turns (Nose down )
Important: Wi-Fi Repeater power is running out or is
charging when the red light blinks. If the power is low ,
please charge it as soon as possible.
Preview Interface
Connect Interface
Noteďź(1) Propellers are designed to self-tighten during
flight; therefore do not tighten them excessively. Do not use
glue on the threads. (2) Ensure propellers are attached in the
correct position. The quadcopter can not fly properly if the
propellers are installed incorrectly. Wear protective gloves
while installing as propellers are very thin and may cause
accidental scratches.
Touch "
" to establish connection between the
mobile device and camera. After connecting, the App will
navigate to the App Preview interface. If you can see
real-time camera preview on screen, the mobile device has
successfully connected with the camera.
S-PPAP10PRA01V1
FCC Information and Copyright
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
âReorient or relocate the receiving antenna.
âIncrease the separation between the equipment and receiver.
âConnect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
âConsult the dealer or an experienced radio/TV technician for help.
15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Administrator Create Date : 2015:08:18 10:03:21+08:00 Modify Date : 2015:08:18 10:03:21+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Title : AEE标准英文快速入门手册 410x280mm 105g铜版正反彩色印刷+2折 Creator : Administrator Metadata Date : 2015:08:18 10:02:58+08:00 Creator Tool : Adobe Illustrator CS6 (Windows) Thumbnail Width : 256 Thumbnail Height : 84 Thumbnail Format : JPEG Thumbnail Image : (Binary data 10654 bytes, use -b option to extract) Instance ID : uuid:32bdccaa-2a4e-4842-8763-13beecfb17bc Document ID : xmp.did:F5304AAE8D35E51192838AE05A60C312 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:fbd4c211-3e33-40b6-a5ea-24f9c17bc7ba Derived From Document ID : xmp.did:A0DC96A14513E511B6A4DF38E427FDB1 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:8F9F6766D66AE411B4469F79D58D592C, xmp.iid:F5304AAE8D35E51192838AE05A60C312 History When : 2014:11:13 09:43+08:00, 2015:07:29 09:53:07+08:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : C:\Documents and Settings\liaopl\桌面\Disponible-sur-GooglePlay.jpg, C:\Documents and Settings\liaopl\桌面\英文桌面UI 2015-5-22\E.jpg, C:\Documents and Settings\liaopl\桌面\英文桌面UI 2015-5-22\1_0wifi连接界面成功_s.jpg, C:\Documents and Settings\liaopl\桌面\英文桌面UI 2015-5-22\2_1未展开飞行控件.jpg Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 427.566667 Max Page Size H : 296.333333 Max Page Size Unit : Millimeters Font Name : Arial-BoldMT, ArialMT, ErasITCbyBT-Bold, FZY3K--GBK1-0, AdobeSongStd-Light Font Family : Arial MT, Arial, Eras Bd BT, 方正准圆_GBK, Adobe 宋体 Std Font Face : Bold, Regular, Bold, Regular, L Font Type : Open Type, Open Type, TrueType, TrueType, Open Type Font Version : 001.001, Version 3.00, mfgpctt-v1.52 Tuesday, January 26, 1993 8:34:43 am (EST), 1.10, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168 Font Composite : False, False, False, False, False Font File Name : Arial-BoldMT.otf, ARIAL.TTF, erasb.ttf, FZY3K.TTF, AdobeSongStd-Light.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants L : 58.431400 Swatch Groups Colorants A : 56 Swatch Groups Colorants B : 37 Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : 明亮 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000002 Swatch Groups Colorants Magenta : 90.000004 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Acrobat Distiller 9.0.0 (Windows) Page Count : 3EXIF Metadata provided by EXIF.tools