AEE Technology AEES90ABC01 Action Camcorder User Manual CEC4B5B533

Shenzhen AEE Technology CO., LTD. Action Camcorder CEC4B5B533

User manual

User Manual1. Battery Installation and Charging- Push the battery compartment cover in the arrow direction and place the battery in thebattery compartment.- Use the standard USB cable to charge the camera. The red indicator will flash slowly in thecharging process and remain on when charging is completed.2. TF Card Installation and Power On- In power-off state, insert the TF card into the TF card slot on the side until you hear a clicksound.- Long press the power key for 3s to turn on the camera, and the red indicator will remain on.3. Video Recording- In video recording mode, press [Record] to start recording the video, and the green indicatorwill flash slowly.- Press [Record] to stop recording the video.4. Photo Shooting- In video recording mode, press [Shoot] to switch to the photo shooting mode.- Press [Shoot] to shoot a photo, and the green indicator will flash once.5. Settings- In preview state, swipe left to display the main menu. Click the relevant icon to switch to thevideo recording, single shot, snapshot or burst mode.- Click “Settings” in the main menu, select a type on the left, swipe the item area up or downto select an item and click “/” to enter or exit its subitems. Finally, swipe right to exit.6. APP- You can enter “Google play” or “Apple Store” to search for and download “AEE APP” orscan the QR code on the home page to download it.- Enable the camera’s Wi-Fi function by long pressing the Wi-Fi key until the Wi-Fi iconappears on the upper left corner. Start the installed APP, click [Connect to Wi-Fi] to searchfor and connect to the Wi-Fi signal source “AEE Magicam” in WLAN (default password:00000000). Return to the control interface when the connection is successful. Then youcan use the APP to control the camera. (Please enter [Settings] to set the Wi-Fi mode to“AP” prior to the connection.)
7. Connection to PC/Mac- Use the standard USB cable to connect the camera to your PC/Mac and then turn on thecamera. Double click “My Computer” (on the desktop of your PC/Mac) →“Removable Disk”→the camera icon to view the files on the camera or copy or move them to your PC/Mac.FCC STATEMENT :This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may causeundesired operation.Warning: Changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. This equipmentgenerates uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected. Consult the dealer or an experienced radio/TV technician for help.RF warning statement:The device has been evaluated to meet general RF exposure requirement. The device can beused in portable exposure condition without restriction.

Navigation menu