| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2117722 |
| Application ID | kQQ3N4YLzH0JhLvArpqDZw== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 61.96kB (774524 bits) |
| Date Submitted | 2013-11-13 00:00:00 |
| Date Available | 2013-11-13 00:00:00 |
| Creation Date | 2013-11-12 15:54:58 |
| Producing Software | Acrobat Elements 7.0.5 (Windows) |
| Document Lastmod | 2013-11-12 15:54:58 |
| Document Title | Microsoft Word - User’s manual.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | Administrator |
PR3O Quick Start Guide
components
1.PR30 components
Charging indicator
Power-on indicator
stop key
Shutter key
> Record key
P°Wer SW"°" @ Frequency switching key
VOL “v" “EH AV port
It .
VOL ~—" a USB port
Frequency indicators a Buzzer
1x zooming key
2x zooming key
3X zooming key
4x zooming key
Notes: Zooming key is operable only for cameras that support viewing angle options
of “Wide“, “Middle", “Narrow" and ‘Small".0nly SD21W, sozzwsozawsnzsw
support these functions currently.
2.051 components
Power-0n Indicator
' Power switch
3 Push button for 051 clip
‘ .0 @ y Frequency switching key
Frequency indicators
Microphone
Opera
1 .Mounting
Mount D51 to the camera
D51
"' To remove D51 . press "Push” button first and then take it out. "‘
2.Pairing PRao with the camera
Make sure the camera is powered off, press and hold the Record key, and, at the
same time, turn the power switch to ON. Now release the Record key. Within 3
seconds. press and hold the Record and Stop keys on PRso at the same time to
perform code pairing. if pairing is successful, the camera gives two “beep" sounds.
Make sure PR30 is powered on before pairing.
These 3 buttons have same
functions wifih those on (he
remo‘e Convol,
3.Charging
When the battery runs low. “Low Battery" prompt will be displayed on the PRao
screen. At this time, connect the USB port of the camera to the standard charger or
the use port of a PC to charge the battery.
apharging with the standard power adapter h.Charging via a PC use port
Mmi use
The red Indicator blinks slowly in charging and stays on once fully charged.
c.Press and hold the Record key for 3 seconds to detect lhe battery level
Status . .
Power level Status of 4 channel indicators
The indicators turn on for 3 seconds and go out. displaying
current frequency
CH1. CH2 and CH3 indicators turn on for 3 seconds and go
out. displaying current frequency
CH1 and CH2 indicators turn on for 3 seconds and go out,
displaying current frequency
CH1 indicator turns on for 3 seconds and goes out, displaying
current frequency
1 00%
>50% and <100%
>60% and <60%
60%
4.PR30 indicators
Status - ~
Mode Red lndlcakor
The red indica‘or stays on when power-on, and innks slow|y
P°We"°" in standby mode
Charging The red indicator blinks slowly in charging. and
5. Connecting
Connecting PRSO and 051
When the camera is powered on. turn the D51 power switch to ON. At this time.
the Poweron indicator of 051 stays on in yellow. and the frequency indicator stays
on In red. Then power on PR30 to work together with 051.
[051 frequency indicator] [PR30 frequency indicator]
Note: if D51 and FRED have dmevend fiequency. press the [CH] key on PRSO or 051
to switch to the eel-he channel.
press and held [or 3 seconds to lock up the trequecy pelnl.
press and hold (or 3 seconds again to unlock the lrequecy polnl.
press lo increase volume. long press to lncreese TFT
screen brightness:
press to decrease volume. long press to decrease TFT
screen brightness;
the camera Integrates laser function: long press it for 4
seconds to enable/dlsable the laser lunctlon.
[CH] key on F'R30
VOL + key on PR30
VOL - key on PRSO
The Shuner key of PR30
s.Distant playing
If a TV/PC monitor has a HDMI port, you can use an AV cable to connect it to this
device for distant playing.
TVImomlcr
Note:
1. AV clblee ere color coded. Meke lure the cutie lerrnlnel end the par! of
TVIrncnller hes the lame color. The TVlmcnncr shell be gmunded pmpel‘ly.
2. Adjust the monitor to get epllrnum dlepley result.
3. When uelng D51 end PR3!) vmh the cemere, meke eure no other device Ie
wnneaed to AV end HDMI port unhe cernera; otherwise. ebnorrnel dele
lrenernleelcn mey occur.
1 .PRSD Specifications
Description Specification
Maximum video receiving time 5-6 h
Maximum remote control range 100m
Transmitting range with no barrier 250m
Screen 2.0" true Color screen
Power supply i USE 5PIN pan
Frequency indicator 4 indicators: CH1, CH2, CH3. CH4
Buzzer Built—in
Lithium battery 1800 mAh built—in battery
Charging time 4h via standard charger, 5h via USB
Storage temperature —20“C-60“C
Operating temperature —1 0°c—50=c
Operating humidity 15—55% RH
2.D5 1 Specifications
Description Specification
Frequency indicator 4 indicators: CH1. CH2. CH3. CH4
I Storage temperature -20"C—60“C
I Operating temperature ‘1 mic-50%:
| Operating humidity 15~85% RH
Us nngs
1 .it is normal that the surface of the cameras may warm up after long time use.
2.Recharge the battery every 2 months if the camera will not be used for a iong time.
3.Zooming during video recording may siightiy affect the image ouaiity,
4.lf the device gets abnormal or crashes. press Stop + x1 keys to reset. Please wart
whiie the camera is shutting down.
5.Do not expose the camera to severe impact. as it contains sophisticated
components.
e.t
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.4
Linearized : Yes
XMP Toolkit : 3.1-701
Producer : Acrobat Elements 7.0.5 (Windows)
Create Date : 2013:11:12 15:54:58+08:00
Creator Tool : PScript5.dll Version 5.2
Modify Date : 2013:11:12 15:54:58+08:00
Format : application/pdf
Creator : Administrator
Title : Microsoft Word - User’s manual.doc
Document ID : uuid:3e3fd635-83c2-454d-b9de-a094e8df1c45
Instance ID : uuid:f58d8248-f0b4-4c50-ac20-142f07a5bf0f
Page Count : 5
Author : Administrator
EXIF Metadata provided by EXIF.tools