AEE Wireless Technology 823T 2.4GHz Wireless Camera User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	679180
Application ID	qCIO9SeY34l5gGHp43woYg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	52.03kB (650393 bits)
Date Submitted	2006-07-10 00:00:00
Date Available	2006-07-10 00:00:00
Creation Date	2006-06-19 18:01:37
Producing Software	Adobe Acrobat 6.0 Image Conversion Plug-in
Document Lastmod	2006-06-19 18:01:37
Document Title	Manual
Document Creator	Adobe Acrobat 6.0

Operation Guide
2.4GHZ Wireless Camera
Model: ZT-823T
The graphics included are subject to minor change without notice.
DIAGRAM
Camera adapter
STRUCTURE
CAMERA
Infrared Lights ~
Lens -
Channel Switch °
Universal Bracket '
INSTALLATION
1. Load the universal bracket to the camera as the following diagram.
To the bottom of camera To the back of camera (optionally)
2. Connect the antenna to the camera.
3. Locate the camera to a specific position and then adjust it to a suitable
angle.
CAMERA CHANNEL SETUP
You could adjust the channel switch to set the channel of camera for
multi—camera working or avoiding the interference The steps are as the
following.
1, Pull out the hood as the shown direction '.
Q “
2 Remove the front cover counter—clockwise.
Channel
Switch
4. Adjust the channel switch as the following diagram.
Channel Switch Setup Diagram
CH1 CH2 CH3 CH4
1 -H-
2 - - -
CAUTIONS
o The apparatus shall not be exposed to dripping or splashing and that
no objects filled with liquids, such as vases, shall be placed on the
apparatus.
0 Turn off the Camera/Receiver if the system is not in use.
. The adapter is used as the disconnect device from the mains. The
adapter shall remain readily operable
0 The Camera/Receiver can only be completely disconnected from the
mains by unplug the adapter.
0 Do not cut the DC power cable of the apparatus to fit with another
power source.
SPECIFICATIONS
imaging Sensor CMOS
628 X 582(PALJ
T0“) “ms 510 x 492(NTSC)
View Angle
Minimumlllumination L
Transmission Frequency [SM 2,400MHZ~2,483MH2
Transmission Power IOmW/CE; 2mW/FCC
Modulation Type FM
Bandwidth 1 BMHz
Power Supply
CAMERA
+ O
F,< ‘i
90mA (lR OFF)
230mA (IR ON)
lEOmA (IR OFF)
f“ nsumption Current 270mA (IR ON)
Unobstructed Effective
Range
Night Vision Range 15m
Dimensions
(W x D x H) (mm)
Weight
100m
61X9OX138 82x150x17- 61x90x138
zoog 300g
Wanlng
This product is for the sole purpose of security and applicable for monitoring in residential houses.
shops and companies. The user shall observe local rules, regulations and laws, and shall be solely
liable in this regard. This company shall not be liable for any illegalities therein.
C autinn:
Any changes or modifications not expressly approved by the party responsible for compliance could vord the
user’s authority to operate the equipment,
Notez
Note: This equipment has been tested and found to comply “iii: the limits for a Class B digital device. pursuant to
part 15 of the FCC Rules, These limits are designed to prowde reasonable protection against harmful interference
in a residential installation This equipment generates. uses and can radiate radio frequency energy and. if not
installed and used in accordance with the institutions. may cause harmful interference to radio communications.
However. there is no guarantee that interference “ill not occur in a particular installation. If this equipment does
cause harmful interference to nacho or television reception which can be determined by turning the equipment 05
and on. the user is encouraged to try to correct the interference by one or more of the following measures
~-Reorient or relocate the receiung antenna.
~-Increase the separation between the equipment and receiver.
{annecr the equipment into an outlet on a Circuit difl'erent from that to which the receiver is connected
«Consult the dealer or an experienced radio’TV technician for help.
FCC Statement:
This device complies with Part 15 o the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 6
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:121f393b-8c0f-44ea-9c22-286c30207df8
Modify Date                     : 2006:06:19 18:01:37+08:00
Create Date                     : 2006:06:19 18:01:37+08:00
Metadata Date                   : 2006:06:19 18:01:37+08:00
Document ID                     : uuid:37c31e39-7b74-4dc1-ac78-d23a3f0f81b0
Format                          : application/pdf
Creator                         : Adobe Acrobat 6.0
Producer                        : Adobe Acrobat 6.0 Image Conversion Plug-in

EXIF Metadata provided by EXIF.tools