AEE Wireless Technology 850T 2.4GHz Wireless Camera User Manual Manual revised

Download:
Mirror Download [FCC.gov]
Document ID	679740
Application ID	1NEJCUFiLq4QewqnaQUunw==
Document Description	Manual revised
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	98.72kB (1233976 bits)
Date Submitted	2006-07-11 00:00:00
Date Available	2006-07-10 00:00:00
Creation Date	2006-07-11 10:24:48
Producing Software	Adobe Acrobat 6.0 Image Conversion Plug-in
Document Lastmod	2006-07-11 10:25:00
Document Title	Manual revised
Document Creator	Adobe Acrobat 6.0

Operation Guide
2.4GHz Wireless Camera
Model: ZT-850T
FCC Statement:
This device complies with Part 15 o the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference. and (2) this device must accept any
interference received. including interference that
may cause undesired operation.
The graphics included are subject to minor change without notice.
Motion Alarm Setup:
It refers to the alarm against various movements If you slide the alarm
setting switch to IR position, the alarm indicator lights up green for 105 and
then extinguishes to reset for 103. Afterward, the system enters the alarm
stand-by mode. When a movement is actually detected, the alarm indicator
lights up green again for 105 and then enters the next alarm circle.
Sound Alarm Setup:
It refers to the alarm against various sound above 75dB. If you slide the
alarm setting switch to S position, the alarm indicator lights up red for 103
and then extinguishes‘ Afterward, the system enters the alarm stand—by
mode. When the sound above 75dB is actually detected, the alarm indicator
lights up red again for 10s and then enters the next alarm circle.
No Alarm Setup:
It refers to the abandonment of the alarm function If you slide the alarm
setting switch to OFF position, the alarm indicator does not light up and the
alarm function is disabled.
Note:
when the camera is powered on by dry batteries and directly plugged in by
the adapter, the alarm function fails to work and the alarm indicator does
not light up. If this is the case, slide the power switch to OFF and back again
to ON; the indicator lights up and the alarm function is successfully
activated.
_] 1a
CONTENTS
Packing List ----------------------------------------------------------------------------------------------- 1
850L ------------------------------------------------------------------------------------------------------------ 1
850n4 ------------------------------------------------------------------------------------------------------------ 1
Diagram -------------------------------------------------------------------------------------------------------- 2
850L rrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr 2
850hd ------------------------------------------------------------------------------------------------------------ 2
Structure ------------------------------------------------------------------------------------------------------ 3
Camera ------------------------------------------------------------------------------------------------------- 3
Receiver ------------------------------------------------------------------------------------------------------- 3
Installation ------------------------------------------------------------------------------------------------ 4
Table Installation of Camera ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 4
Wall Installation of Camera ---------------------------------------------------------------------- 5
Receiver Installation of Camera -------------------------------------------------------------- 6
Camera Channel Setup ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 10
Camera Alarm Setup --------------------------------------------------------------------------- 10
Receiver Mode Control Setup ------------------------------------------------------- 12
Cautions ------------------------------------------------------------------------------------------------------- 13
Specifications ------------------------------------------------------------------------------------------ 14
DIAGRAM
Camera Adapter
Power Jack
STRUCTURE
CAMERA
ZT-850T
Antenna
Alarm Setting
Alarm Indicator -—-—- SWitCh
Infrared Lights._-'. -—;-r-
Lens-—--. ',§
Motion Detection Sensor -——~ g—Power Socket
Power Indicator -—-—’ .
Power Sw1tch
Compartment
Power Jack
INSTALLATION
Table Installation of Camera
1. Connect the camera to the adapter (DC 8V BOOmA) and then slide the
power switch to ON position. The power indicator lights up.
Notes:
0 This camera can also work on dry battery (the wall location excludes dry
battery use); please load 4 AAA batteries to the battery compartment at
the bottom of camera with their polarities matched.
' The AC adapter will work instead of batteries after it is plugged If the
camera is left unused for a long period of time, please unplug the adapter
and remove the batteries.
2 Rotate the camera to a suitable angle for surveillance
Wall Installation of Camera
The camera can also be mounted onto the wall with the hanging bracket,
The steps of installation are as follows:
1. Press and hold the back side of the camera firmly and then push the base
downwards to remove it.
Press,
hold and no
Push
24 Drive two screws into the wall according to the screw holes in the
hanging bracket; load the hanging bracket to the camera and hang it on
the screws
4. Connect the camera to the adapter The power indicator lights up.
Note: In the case of wall location, this camera can only work by the
adapter.
CAMERA CHANNEL SETUP
Remove the base of the camera and you will notice the channel switch
marked with 1-2-3, Any one of them can be selected separately for the
purpose of the multi—camera working situation or interference avoidance
CHI: 2,414MH:
CHZ: 2,432M-[z
CHS: 2,468MI-[z
Note: To remove the base of this camera, press and hold the back side
firmly and then push it downwards.
CAMERA ALARM SETUP
The camera provides either motion detection alarm or sound detection
alarm.
Alarm Setting Switch
Alarm Indicator
_]0_
SPECIFICATIONS
_—
Imaging Sensor CMOS
Motion Detection Distance 8m
Motion Detection Angle Horizontal:60°; Vertical: 15"
Sound Control Sensitivity >75dB
Consumption Current 120mA & 220mA(IR ON}
Unobstructed Effective Rangt 100m
Night Vision Range 5m
60 X 133 X 86(mm)
195.
CAMERA
EU Environmental Protection
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your Local Authority or retailer for
recycling advice. _
Waning
This product rs for the sole purpose of securrty and apphcable tor momtonng m reatdenttal houses,
shops and unnpnmt—x The tm—et slmll film—twp, |l)li‘dl ttlles tegttlnht ms élllli ltl‘v‘i’fi‘ and shall be allely
Itable m thts regard Thls company shall not be liable tot any illegaltttes theretn
(‘zttrinttz
Any changes or modifications not expressly approved by the puny responsible for compliance could void the
user's authority to operate the equipment
Note
Note nu, equipment has been tested and found to comply mm the limits for a Class B dlgltzl device pursuant to
pm! 15 of the FCC Rules “its: limits are designed to provide ieaxuimble ploltclwu against harmful inteit‘eteme
in a restdentml installation [his equtpment generates. uses and can radiate radio frequency energy and it not
installed and med in accordance "nth the instructions. may cause harmful interference to radio :onmmmcations
However. there is no gmmntec [lull interference will not occur in a particular installation. If this equtpment does
cause harmful intetference to radio or telez‘tswn reception. which can be determined bt'mming the equipment off
and on. the user is encotuaged to try to correct the interference b} one or more of the following measures
-—Renriem or relorate the receiving antenna
—l.ncrcasc the separation between til: equipment and rcccn‘cr
"Connect the equipment into an outlet on a circuit different from tint to which the receiver 1; connected.
-—Co‘nsull Lit: dculct 1]! an cxpcncnccdmdw TV technician (at help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 10
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:7fd59148-1178-406b-8bbc-d134ffae13c5
Modify Date                     : 2006:07:11 10:25:00+08:00
Create Date                     : 2006:07:11 10:24:48+08:00
Metadata Date                   : 2006:07:11 10:25:00+08:00
Document ID                     : uuid:e6922884-9c63-4573-b909-ac6c84984499
Format                          : application/pdf
Creator                         : Adobe Acrobat 6.0
Producer                        : Adobe Acrobat 6.0 Image Conversion Plug-in

EXIF Metadata provided by EXIF.tools