AEE Wireless Technology 906T 2.4GHz Wireless Camera User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	678223
Application ID	d+kS9BLA7LdfZfrD0Zf0nA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	52.21kB (652581 bits)
Date Submitted	2006-07-07 00:00:00
Date Available	2006-07-07 00:00:00
Creation Date	2006-06-19 18:58:03
Producing Software	Adobe Acrobat 6.0 Image Conversion Plug-in
Document Lastmod	2006-06-19 18:58:03
Document Title	Manual
Document Creator	Adobe Acrobat 6.0

Operation Guide
2.4GHz Wireless Camera
Model; ZT—906T
The graphics included are subject to minor change without notice.
DIAGRAM
Camera adapter
STRUCTURE
CAMERA
Infrared Lights ~
Lens -
Channel Switch °
Universal Bracket '
INSTALLATION
1. Load the universal bracket to the camera as the following diagram.
To the bottom of camera To the back of camera (optionally)
2. Connect the antenna to the camera.
3. Locate the camera to a specific position and then adjust it to a suitable
angle.
CAMERA CHANNEL SETUP
You could adjust the channel switch to set the channel of camera for
multi—camera working or avoiding the interference The steps are as the
following.
1, Pull out the hood as the shown direction '.
Q “
2 Remove the front cover counter—clockwise.
Channel
Switch
4. Adjust the channel switch as the following diagram.
Channel Switch Setup Diagram
CH1 CH2 CH3 CH4
1 -H-
2 - - -
CAUTIONS
o The apparatus shall not be exposed to dripping or splashing and that
no objects filled with liquids, such as vases, shall be placed on the
apparatus.
0 111m off the Camera/Receiver if the system is not in use.
. The adapter is used as the disconnect device from the mains. The
adapter shall remain readily operable
0 The Camera/Receiver can only be completely disconnected from the
mains by unplug the adapter
0 Do not cut the DC power cable of the apparatus to fit with another
power source.
SPECIFICATIONS
imaging Sensor 1/4-indi Sharp CCD
512 X 582(PAL)
512 X 492(NTSC)
39“
Total Pixels
View Angle
Minimum Illumination
Transmission Frequency
Transmission Power
Modulation Type
Bandwidth
Power Sup ly
s a
2<1
Lux
ISM 2,400MHz—~2,483MH2
lOmW/CE; 2mW/FCC
CAMERA
90mA (IR OFF)
230mA (lR ON)
120mA (lR OFF)
270mA (IR ON)
Consumption Current
Unobstructed Effective
Range
Night Vision Range
Dimensions
(W x D X H) (mm)
Weight
100m
15m
61X9OX138 82x150xl7- 61x90x138
300g 300g
Waning
This product is for the sole purpose of security and applicable for monitoring in residential houses
shops and companies. The user shall observe local rules. regulations and laws, and shall be solely
liable in this regard, This company shall not be liable for any illegalities therein.
Caution:
Any changes or modifications not expressly apprm'ed by the party responsrble for compliance could veld the
user’s authority to operate the equipment
Note
Note: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to
part 15 of the FCC Rules. These limits are destgned to provide reasonable protection against harmful interference
in a residential installation. This equipment generates. uses and can radiate radio fi'equency energy and, if not
installed and used in accordance With the instructions. may cause harmful interference to radio communications.
However. there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or telension reception which can be determined by turning the equipment off
and on. the user is encouraged to try to correct the interference by one or more of the following measures:
~Reorient or relocate the receiving antenna.
"Increase the separation between the equipment and receiver.
—Conncct the eqmprnent into an outlet on a circtut difl'erent from that to which the receiver is connected
—Consult the dealer or an emerienced radins‘TV technician for help.
FCC Statement:
This device complies with Part 15 o the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 6
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:1df9c7da-2a84-4901-bebd-9f3afb5879ef
Modify Date                     : 2006:06:19 18:58:03+08:00
Create Date                     : 2006:06:19 18:58:03+08:00
Metadata Date                   : 2006:06:19 18:58:03+08:00
Document ID                     : uuid:e557d45e-8d29-410f-b1da-1ca727028a6a
Format                          : application/pdf
Creator                         : Adobe Acrobat 6.0
Producer                        : Adobe Acrobat 6.0 Image Conversion Plug-in

EXIF Metadata provided by EXIF.tools