AEE Wireless Technology BT601 Wireless Camera User Manual OM 601LD new

Download:
Mirror Download [FCC.gov]
Document ID	703537
Application ID	O2W8bgvXSP4jqi2P5R7n7w==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	133.28kB (1665942 bits)
Date Submitted	2006-09-11 00:00:00
Date Available	2006-09-12 00:00:00
Creation Date	2006-08-30 09:56:49
Producing Software	Corel PDF Engine Version 1.0.0.525
Document Lastmod	0000-00-00 00:00:00
Document Title	OM_601LD-new
Document Creator	CorelDRAW 12.0 版
Document Author:	aee

English
User's Manual
2.4GHz Wireless 
Remote Control Camera Kit
Model: 601LD
2.4GHz Wireless Camera BT601
2.4GHz Wireless Receiver LR255
Please read this manual carefully and thoroughly before any attempt to
install and operate this product and retain it for your future reference.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device and its antenna must not be co-located or operating in conjunction
with any other antenna or transmitter.
EU Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling
advice.
TABLE OF CONTENTS
INTRODUCTION
Notice
Approval Information (FCC/CE)
Restrictions
Maintenance
PRODUCT
Package Contents
Feature Locations
Adapter
INSTALLATION & USAGE
Installation
Receiver Remote Control Function
Channel Looping Setup
1~3
1~2
4~6
7~10
7~8
10
SPECIFICATIONS
11
TROUBLESHOOTING
12
INTRODUCTION
Thank you for your interest and support in our product and purchasing
this wireless camera kit. This product works at ISM-2.4GHz frequency
band, which could be legally used worldwide without permission.
We feel confident that you will be pleased with the quality and features
of this product.
The camera features one CMOS image sensor and a transmitting
module to capture the image and transmit them wirelessly.
The receiver features a receiving module to receive and output AV
signals.
Notice
Notice: This product may cause interferences with other wireless
equipment that operates at 2.4GHz ISM band. Please turn off one of
the equipments to eliminate the interference.
Product Assurance: This camera will emit electromagnetic wave,
just like other wireless products. But its transmitting power is less than
other wireless products such as mobile phones. The 2.4GHz wireless
camera meets wireless frequency security standards and recommended
indexes while working. These standards and indexes are certificated by
academic organization and represent the cogitative research of the
scientific workers who continuously explore and annotate the involved
fields. So we believe that our products are safe for customers.
Approval Information
All our products meet the requirements of approval FCC or CE, and
are granted the FCC or CE certification. They are authorized to bear
FCC or CE mark.
FCC
This equipment has been tested and found to comply with the limits 
for a Class B digital device, pursuant to Part 15 of the FCC rules. 
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or 
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Connect the equipment into an outlet on a circuit different from that 
to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions: 
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation Changes and
modification not expressly approved by the manufacturer or
registrant of this equipment can void your authority to operate this
equipment under Federal Communications Commissions rules.
CE
This product complies with standards including Low Voltage Device
Directive 73/23/EEC; EMC Directive 89/336/EEC and R&TTE
Directive 1999/5/EC. It passed the subject tests by the authority
concerned and is authorized to bear CE mark.
Restrictions
1. DO NOT use this product to violate one's privacy. Monitoring one's
activities without consent is illegal and this product is not designed
and manufactured for such purpose;
2. DO NOT put this product near any medical equipment. Radio
waves might potentially cause breakdown of electrical medical
equipment. So this product should be placed at least 1 feet away
from any heart pacemaker. Radio waves might potentially
influence heart pacemaker and lead to respiratory disturbance;
3. DO NOT use this product for any illegal activities. We shall not be
responsible for any consequences of illegal acts committed by the
user.
Maintenance
1. 	
2. 	
3.	
4.	
5. 	
Ensure the sufficient ventilation space is available;
Do not shake or strike the product;
Keep it dry and dustless and avoid exposing it to direct sunlight;
Do not place product near any magnetic objects;
Avoid putting the product in places where the constantly changed
temperature or humidity occurs;
6.	 Keep product away from heat sources such as electric heater;
7.	 Do not use the camera near aggressive chemicals;
8.	 Do not use this camera near water, for example, near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet basement or near
a swimming pool and the like;
9.	 Do not use the camera in the places which are enclosed by metal.
The surrounding metal like lifter, cabin, may shield the
electromagnetic wave, and result in failure of signal reception;
10. Please obey the local government's environment protection policy;
11. Please turn off the power when left unused;
12. Do not disassemble or repair the camera or receiver; doing so
might cause damages to the product.
PRODUCT
Package Contents
This package comes with the following items. Please check whether
they are all included in the packaging box, if one or some is missing,
contact the retailer for replacement.
① 2.4GHz wireless camera×1
② 2.4GHz wireless receiver×1
③  Adapter for camera×1
④  Adapter for receiver×1
①
② 
③
④
⑤ 
⑥
⑤  AV cable×1
⑥ Earphone×1
⑦  User's manual ×1
⑦
Note: 
The picture may vary from the actual objects.
Adapter
This product always conforms to the authenticated AC adapter. The
adapter should be marked one of the following:
UL Mark
SAA Mark
American power
supply authentication
Australia power
supply authentication
CE Mark
PSE Mark
European Union power
supply authentication
Japan power
supply authentication
GS Mark
CCC Mark
German power
supply authentication
China power
supply authentication
Note: 
When using the power adapter, make sure the rating voltage on it is compatible
with that of the device to avoid potential damages resulting from incorrect usage
of power supply.
FEATURE
1. Camera
Rotate Axis
(by Remote control)
Infrared Lights
Lens
Antenna
Base
Indicator
Channel Switch
Power Jack
Power Switch
2. Receiver
Earphone Socket
Antenna
Channel
Indicator
LCD Screen
Volume Control
Camera Manual
Vertical Rotation
Brightness Control
Camera Power Button
Camera Auto
Horizontal Rotation
Channel Button
Camera Manual
Horizontal Rotation
Power Switch
Power Jack
AV Output
Battery
Cover
Bracket
INSTALLATION & USAGE
Installation
1. Locate the camera to a specific position.
2. Connect the camera to the adapter (DC 9V 1.5A) and then slide the
power switch to ON position. The power indicator lights up.
3. Connect the receiver to the adapter (DC 9V 1.5A) and slide the power
switch to ON position.
Notes:
This receiver can also work on dry battery. Please load 4 AAA batteries to the
battery compartment with their polarities matched.
The AC adapter will work instead of batteries after it is plugged. If the receiver is
left unused for a long time, please unplug the adapter and remove the batteries.
4. Set the channel of receiver same as that of camera by pressing the
channel button continuously, and the pictures are displayed on the
LCD screen.
Note: 
For more clear pictures, please connect the receiver to a monitor/TV with AV cable.
Monitor/TV
5. Adjust the brightness and volume of the receiver to a satisfied level.
Volume Control
Brightness Control
Receiver Remote Control Function
The receiver can remote control the power and direction of the camera.
The operation is as below.
Remotely control the camera's power
Press the CAM. ON/OFF button on the receiver to power on the camera;
press the button again to power off.
Note:
If the channel indicator CH1 on the receiver lights up, the camera at channel 1
can be remote controlled.
Remotely control the camera's direction
1. Press the AUTO button on the receiver to activate the camera's auto
horizontal rotation function. Press again to disable the function.
2. Press the
button on the receiver to rotate the camera at
horizontal direction manually. The max. angle is 180 degree.
3. Press the
button on the receiver to rotate the camera
at vertical direction manually. The max. angle is 60 degree.
Channel Looping Setup
The receiver supports up to 3 cameras working at the same time. You
could press and hold the CHANNEL button on the receiver for 2 seconds
to enable the automatic looping function. The channels are shown on
the monitor/TV one by one every 5 seconds.
Press the CHANNEL button on the receiver again to exit the looping
function.
You can press the CHANNEL button to manually select the channel.
10
RECEIVER
CAMERA
SPECIFICATIONS
Imaging Sensor
CMOS Total Pixels
View Angle
Minimum Illumination
Transmission Frequency
Transmission Power
Modulation Type
Bandwidth
Power Supply
Consumption Current
Horizontal Rotating Angle
Vertical Rotating Angle
Unobstructed Effective Range
Night Vision Range
Dimensions(W ×  D ×  H)
Weight
LCD
LCD Resolution
Receiving Frequency
Intermediate Frequency
Demodulation Type
Receiving Sensitivity
Power Supply
Consumption Current
Dimensions(W ×  D ×  H)
Weight
Operating Temperature
Storage Temperature
Operating Humidity
CMOS
628 ×  582(PAL);510 ×  492(NTSC)
62o
0Lux
ISM 2,400MHz~2,483MHz
10mW/CE; 2mW/FCC
FM
18MHz
+9VDC
600mA & 700mA(IR ON)
180o
60o
100m
5m
104 ×  110 ×  124(mm)
260g
2.5" TFT
480 ×  234
ISM 2,400MHz~2,483MHz
480MHz
FM
≤  -85dBm
+9VDC
300mA
68 ×  149 ×  26(mm) (Excluding Antenna)
170g
0 C~+50 C/+32 F~+122 F
-20 oC~+80 oC/-4 oF~+176 oF
85%RH
*Channel Frequency: CH1=2,414MHz; CH2=2,432MHz; CH3=2,468MHz.
*Actual transmission range may vary according to weather, location, interference and building
construction.
*All the specifications are subject to minor change without prior notice.
11
TROUBLESHOOTING
When you experience the operation problems, please check and try the
following yourself before claiming that it is the defective product or
consulting the experienced technician.
Trouble
No image
Snowflake
Image
Shaded picture
Possible Solution
No sound
Noisy sound
Normal sound
1. Check the power supply.
2. Make sure that both the camera and
receiver are connected with power
adapter.
1. Check the receiver channel setting
to make sure that the channel is set
to match the camera.
2. Make sure that the receiver is within
certain distance to the camera.
3. Move the receiver in another nearby
position for a better reception.
1. Make sure that the receiver is within
certain distance to the camera and
there is block between the receiver
and the camera
2. Move the receiver in another nearby
position for a better reception.
Mismatching system of TV (monitor)
and cameras.
No color
Normal sound
Interfered with other devices nearby;
Remove or turn off such devices.
Normal image
Noisy sound
12


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Tagged PDF                      : No
XMP Toolkit                     : 3.1-702
Creation Date--Text             : 
Producer                        : Corel PDF Engine Version 1.0.0.525
Mod Date--Text                  : 
Format                          : application/pdf
Creator                         : aee
Title                           : OM_601LD-new
Creator Tool                    : CorelDRAW 12.0 版
Modify Date                     : 2006:09:08 11:26:12+08:00
Metadata Date                   : 2006:09:08 11:26:12+08:00
Document ID                     : uuid:6992a415-efff-4a7e-8ddd-b6eb74332914
Instance ID                     : uuid:72000f28-de8e-4684-b8d1-171332517e18
Page Count                      : 17
Create Date                     : D:20060830095649
Author                          : aee

EXIF Metadata provided by EXIF.tools