AHOKU ELECTRONIC OCAM-M1 WiFi Vedio Camera User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2517139
Application ID	AfbtIonIIL6Wab5z+PzF4Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	193.22kB (2415189 bits)
Date Submitted	2015-01-28 00:00:00
Date Available	2015-01-28 00:00:00
Creation Date	2015-01-19 16:08:31
Producing Software	GPL Ghostscript 9.06
Document Lastmod	2015-01-19 16:08:31
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2
Document Author:	552

OCam M1
HD WiFi Security Camera
User's
manual
Directory
1. Download APP “Yes iCam…… …….3
2. Power-on …………..…………….…….3
3. First WIFI setup………….…………....4
4. View real time video…………….……..6
5. Restore camera factory setting ……..10
6. Living view instruction……………..…11
7. Camera setting…………………..……12
8. FAQ……………………………………...19
9. Care and maintenance………………..19
Before use, please prepare:
Smart phone / Tablet
Camera
Router
1. Download APP “Yes iCam”:
Download "Yes iCAM" Application software from “Google Play” / ”
Apple Store”. Search keywords “Yes iCam”, download and install it
on your Smartphone/Pad.
2. Power on
1. The power supply is connected to the power outlet (1) and power
supply DC-side connected to camera power connector. Then Led
on camera will be red color.
3. First WiWi-Fi Setup
1. The led flashes between red and green color.
2. Open Mobile phone / Tablet setting in the WiFi option to find and
even "sbt-ipcam-XX:XX:XX:XX:XX:XX" , default factory password "
12345678".
3. Run APP "Yes iCam" . APP will go into "Wireless Configuration",
Choice the WiFi APP name to connect to router, and enter the
router's password, and complete the connection.
Welcome surface
choose WiFi SSID
Notice:
1: WiFi SSID is the wireless network AP name.
2: If you can't find what you want to connect your camcorder WiFi
Network , Make sure that the camera WiFi within the range of the
router.
3: If you enter the wrong SSID Password according to camera
“Beep beep " Rang three times. Please close the application
software and reconnect again.
4: Make sure your Smartphone or Tablet PC with camera is
connected to the same WiFi Router.
Connected
4. View real time video
1. In Camera list, please click on the camera icon to view a live
video camera.
2. Add a camera in the same
same WiFi Router.
Run “Yes iCam” APP. Please choice “Add New Camera” under
Camera List page. Then APP will scan the nework to find the
available camera and display all APP could find
Please choice the camera list APP found.
Then, please input password. And press “confirm” or “V”. APP will
add this camera.
<** Default password is “admin”. Please always change your
password.**>
a. click ”add camera”
b. choose the camera
c. key-in password “admin”
d. connected
Notice : If you input the wrong password. Please click this camera. Then, APP
will ask to input password again.
3. Add a remote camera
Click on the camera list interface " Add cameras ", then click on the
" join the remote cameras " . In "adding remote cameras” ,Please
fill 20 characters and password into " camera UID" , “password”.
(First-time installation is all lower case Admin).
a. click “add
add a remote camera”
camera
b. fill UID(20
admin”
UID(20 characters
characters), 及 password ”admin
admin
10
c. QR Code to add remote camera
11
d. connected
5. Restore camera factory setting
If you forget the camera password, it will take you about 1 minute to reset to
factory setting.
Please follow the procedure:
1. Turn on camera power by plugging power cable.
2. After 20 seconds, please press 5 seconds “reset to default button”. And,
Hear 3 Beep sound,
3. Then, the system will reboot and back to factory setting.\
Notice: if you didn’t hear the “beep sound”, please restart it and do again.
12
6. Living View Instruction:
1. Camera Name
2. Snapshot：Press this button to capture a snapshot from living view.
13
3. Snapshot folder: You could get all snapshot pictures from this folder.
4. Video Record ON/OFF (Need to have TF card. And plug in TF card into camera TF
card slot.)
5. Two way audio switch: Listen, mute or speak.
6. Switch to 1280*720 resolution living view.
7. Switch to 640*360 resolution living view.
8. Switch to 320*180 resolution living view.
9. Flip for living view.
10. Mirror for living view.
11. Return：Return to camera list
12. Camera status: Online/Offline, P2P/Relay/LAN
13. Message for resolution, frame rate, and video bit rate.
14. Online number to watch living view.
7. Camera setting:
In Camera list, please click symbol to into camera setting.
1. camera name
Modify the camera name
14
2. Delete camera
Confirm delete this camera
3. Event review
Check all events from motion detection and voice detection.
4. Motion Detection
When motion detection was happened, camera will get snapshot to send to
your email or send out push message into your smartphone/Pad. Please
15
configure motion detection. Then, you could turn on all features.
1. Turn on motion detection。
2. Using your figure to set the area of motion detection.。
3. configure email。 
Click “Email setup”
SMTP setup instruction:
16
notice : put in the memory card before setup motion detection。
6. Voice detection
When camera microphone receive all sound, the system will check whether
the sound level to be reached.
Then, camera will send out voice and push message and start to video for 5
minutes.
17
Modify sensitivity
7. Video Configuration
Power frequency：50Hz、60Hz。 
Resolution：QVGA(320X180)、VGA(640X360)、HD (1280X720)。
Video bit rate：512Kbps、256 Kbps、192 Kbps。
Video frame rate：30fps、25fps、20fps、15fps、10fps、5fps
18
8. Password Configuration
Modify/Change password.
Key-in the old password before key-in the new password.
19
9. SD Card safety remove
Please turn off video recording. Then, press this function to protect SD card data.
10. Video recording configuration
Configuration video recording file
item：VGA（640*480）、HD（1280*720）
20
11. Video Playback
You could playback the video on SD card.
21
8. FAQ
APP could not link to camera,
m sure the WiFi is on connected.
camera, I’m
connected.
●make sure power on camera by plugging power cable。
●make sure you see Camera LED as green color always。
●make sure your smartphone/Pad connect to internet or home WiFi router。
●restart the camera，please push the restart bottom by needle。
9. Care and maintenance
●Please allow children far from all parts and accessories
●Fingerprints or dirt on the surface of the lens have adverse effects on cam work, avoid
touching the lens surface using a mobile phone.
●If the lens appears dirty, wipe the lens with a soft cloth.
●Keep the camera dry, precipitation, humidity, and other circuit containing liquid
minerals will erode.
●Please do not use or store in dusty, dirty areas.。
●. Do not store in high temperature areas, high temperatures can shorten the life of
electronic components and lead to deformation or melt certain plastic parts
●. Do not store in ultra low temperature region. System warming unit (back to normal
temperature), moisture is formed inside the enclosure, and may cause damage to the circuit
board.。
●Do not attempt to open the casing. If by non-professional devices, which can lead to
system compromise.
●. Avoid fall or impact.
●Accompanying or in the form of accessories only supply the power supply to operate the
machine。
●Do not overload the power outlets or extension cords, otherwise fire or electric shock.
22
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm between the
radiator and your body.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the followingmeasures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2015:01:19 16:08:31+08:00
Create Date                     : 2015:01:19 16:08:31+08:00
Metadata Date                   : 2015:01:19 16:08:31+08:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Title                           : <4D6963726F736F667420576F7264202D20BF69DBA349502043414DA8CFA5CEBBA1A9FAAED120AD5EA4E52E646F63>
Creator                         : 552
Document ID                     : uuid:b9e876be-dabe-40e2-a8fc-3ccee22c5cc4
Instance ID                     : uuid:2f7cfc29-e98d-400f-a489-9c1760219b6e
Producer                        : GPL Ghostscript 9.06
Page Count                      : 23
Author                          : 552

EXIF Metadata provided by EXIF.tools