AISOLUTION KDCSLED-HF KDCSLED HF RFID Module Pack User Manual

AISOLUTION CO., LTD. KDCSLED HF RFID Module Pack

User Manual

 1      VH9KDC500                                                                             KDCSLED-HF   User Manual Rev 1.1   April 2018
 KDCSLED-HF User Manual                                      INTRODUCTION 2 Revision 1.1 Copyright®2012-2018, KOAMTAC, Inc.  Table of Contents 1. INTRODUCTION .............................................................................. 5 1.1 Specification ....................................................................................................................... 6 1.2 Package ............................................................................................................................... 7 1.3 Installation .......................................................................................................................... 8 2. OPERATING YOUR KDCSLED-HF ............................................... 9 2.1 Configuration ..................................................................................................................... 9 2.2 Configuration barcodes ................................................................................................... 9 2.3 How to read NFC Tags .................................................................................................. 10 3. WARRANTY .................................................................................... 11 4. CONTACT INFORMATION ......................................................... 13
 KDCSLED-HF User Manual                                      INTRODUCTION 3 Revision 1.1 Copyright®2012-2018, KOAMTAC, Inc.  COPYRIGHT, LICENSE, and WARNING PAGE Copyright  2002-2018 by KOAMTAC, Inc. All rights reserved.  No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from KOAMTAC, Inc. The material in this manual is subject to change without notice. KOAMTAC reserves the right to make changes to any product to improve reliability, function, or design. KOAMTAC does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. Follow all warnings and instructions marked on manual and units. Use only the power source specified in this manual or marked on the units. Certain KDC products may be covered by the following issued US patents numbers 7769917, 7954710, 8126399, 8295368, 8346979, 8347366, 8371506, 8483614, 8832323; Korea patents numbers 10-1383407, 10-1354252 and may be patent pending elsewhere, UK publication GB2492615, Korea publication 1020120128598. KDC® is a registered trademark and property of KOAMTAC, Inc. KoamTac® is a registered trademark and property of KOAMTAC, Inc.   CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.
 KDCSLED-HF User Manual                                      INTRODUCTION 4 Revision 1.1 Copyright®2012-2018, KOAMTAC, Inc.  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  FCC RF Exposure Information This equipment complies with FCC RF exposure limit requirements set for in an uncontrolled environment  FCC ID: VH9KDCSLED-HF
 KDCSLED-HF User Manual                                      INTRODUCTION 5 Revision 1.1 Copyright®2012-2018, KOAMTAC, Inc.  1. Introduction    KDCSLED-HF  KDCSLED-HF is a communication module which includes NFC module which is reading from and writing to the RFID(NFC) tag. It confirms to various industry standard RF protocols of NFC. When it is connected to KDC Sled model(as like KDC470), it enables user to collect data with NFC Tag. To find out more about KOAMTAC, Inc. and our family of products, visit us at www.KOAMTAC.com.
 KDCSLED-HF User Manual                                         WARRANTY  6 Revision 1.1 Copyright®2012-2018, KOAMTAC, Inc.  1.1 Specification   Frequency 13.56MHz Supported standard ISO/IEC 14443A, 14443B, 15693 MIFARE 1K/4K, Ultralight Interfaces I2C Supply Voltage 3.3V Dimensions 104.5mm(L)x60mm(W)x10mm(H) Weight 39.5g Drop Spec 4 feet(1.22M) Operating Temperature 32˚F (0˚C) ~ 113˚F (45˚C) Storage Temperature -4˚F (-20˚C) ~ 113˚F (45˚C) Humidity 5% ~ 85% (noncondensing)
 KDCSLED-HF User Manual                                         WARRANTY  7 Revision 1.1 Copyright®2012-2018, KOAMTAC, Inc.  1.2 Package   The standard KDCSLED-HF package contains: 1. One KDCSLED-HF 2. 4 screws + 1 extra
 KDCSLED-HF User Manual                                         WARRANTY  8 Revision 1.1 Copyright®2012-2018, KOAMTAC, Inc.  1.3 Installation • Align KDCSLED-HF screw holes to screw holes on KDC SLED.(As like KDC470)   • Use 4 screws to fasten KDCSLED-HF to KDC SLED.
 KDCSLED-HF User Manual                                         WARRANTY  9 Revision 1.1 Copyright®2012-2018, KOAMTAC, Inc.  2. Operating your KDCSLED-HF  2.1 Configuration NFC Power  Turning NFC Power on or off  Options: Enable/Disable   Data Format  Options: Data only/Packet data. UID Only  Enable or Disable UID Only menu  The KDC only sends UID data to the host device when the KDC is in UID Only mode.  2.2 Configuration barcodes Enable NFC Power    Disable NFC Power    NFC Data Format = Data only  NFC Data Format = Packet data  UID Only = Enable  UID Only = Disable
 KDCSLED-HF User Manual                                         WARRANTY  10 Revision 1.1 Copyright®2012-2018, KOAMTAC, Inc.  New Data Format = Enable  New Data Format = Disable   2.3 How to read NFC Tags 1. Enable the NFC Power option in the NFC Config menu. 2. Touch the NFC tag to the back of the KDCSLED-HF case and make sure the tag and case are within 5cm of each other.  Location for reading NFC Tag   3. The KDC will show the NFC tag UID and the user will hear a short beep if it has been read successfully.
 KDCSLED-HF User Manual                                         WARRANTY  11 Revision 1.1 Copyright®2012-2018, KOAMTAC, Inc.  3. Warranty    LIMITED WARRANTY AND DISCLAIMERS BY OPENING THE PACKAGE OF THIS PRODUCT YOU AGREE TO BECOME BOUND BY THE LIABILITY AND WARRANTY CONDITIONS AS DESCRIBED BELOW. UNDER ALL CIRCUMSTANCES, THIS MANUAL SHOULD BE READ ATTENTIVELY, BEFORE INSTALLING AND OR USING THE PRODUCT.  Serial Number A serial number appears on the KDC label. This official registration number is strictly related to the device purchased. Make sure that the serial number appearing on your KDC is not removed. Removing the serial number will affect the warranty conditions and liability disadvantageously, so please maintain the label with serial number on the KDC.    Units with the serial number label removed should not be operated.  Warranty/Warranty Period/Liability KOAMTAC, Inc. (“KOAMTAC”) manufactures its hardware products in accordance with industry-standard practices. Unless otherwise agreed in a contract, KDC is warranted for a period of one year after purchase, covering defects in material and workmanship except rechargeable battery. KOAMTAC will repair or, at its opinion, replace products that prove to be defective in material or workmanship under proper use during the warranty period. KOAMTAC will not be liable in cases (i) in which the unit    has been repaired or altered unless done or approved by KOAMTAC, (ii) in which  the  unit    has  not  been  maintained  in  accordance  with  any  operating  or  handling instructions supplied by KOAMTAC, (iii) in which the unit has been subjected to unusual physical or electrical stress, misuse, abuse, power shortage, negligence or accident or (iv) in which the unit has been used other than in accordance with the product operating and handling instructions. Preventive  maintenance  is  the  responsibility  of  the  customer  and  is  not  covered  under  this warranty. Under no circumstance will KOAMTAC be liable for any direct, indirect, consequential or incidental damages arising out of use or inability to use either the hardware or software, even if KOAMTAC has been informed about the possibility of such damages.  Warranty Coverage and Procedure
 KDCSLED-HF User Manual                                         WARRANTY  12 Revision 1.1 Copyright®2012-2018, KOAMTAC, Inc.  During the warranty period, KOAMTAC will repair or replace defective products returned to KOAMTAC warehouse. International customers should contact the local KOAMTAC office or support center. If warranty service is required, KOAMTAC will issue a Return Material Authorization Number. Products must be shipped in the original or comparable package, shipping and insurance charges prepaid. KOAMTAC will ship the repaired or replacement product freight and insurance prepaid. Customer accepts full responsibility for its software and data including the appropriate backup thereof. Repair or replacement of a product during warranty will not extend the original warranty term.  CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.
 KDCSLED-HF User Manual               13 Revision 1.1 Copyright®2012-2018, KOAMTAC, Inc.      CORPORATE HEADQUARTERS 116 Village Blvd., Suite 305 Princeton, NJ 08540, USA Phone: 609-256-4700, FAX: 609-228-4373   Email: support@koamtac.com   For more information, visit our website - www.KOAMTAC.com    4. Contact Information

Navigation menu