AKG Acoustics US GB40II Wireless Microphone Transmitter GB40 User Manual Seiten

AKG Acoustics US Wireless Microphone Transmitter GB40 Seiten

manual

Download: AKG Acoustics US GB40II Wireless Microphone Transmitter GB40 User Manual Seiten
Mirror Download [FCC.gov]AKG Acoustics US GB40II Wireless Microphone Transmitter GB40 User Manual Seiten
Document ID375698
Application IDwCPdeKXCZ+juqOC3smbu4g==
Document Descriptionmanual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize38.04kB (475535 bits)
Date Submitted2003-11-24 00:00:00
Date Available2003-11-24 00:00:00
Creation Date2001-09-05 16:58:59
Producing SoftwareAcrobat PDFWriter 4.0 für Windows
Document Lastmod2003-11-19 15:40:33
Document TitleSeiten)
Document CreatorGedruckt wird 04133748.tif (16 Seiten)
Document Author: tr

7 up uu—nex “ Wu” Am“ um mete A
WIRELESS
MICROPHUNE
SVSTEM
WMS40
Bedienungshinwelse sz
Bitte vor Inbetriebnahme des Ge "tes lesen!
Userlnstructions................ ...p.B
Please read the manual before using the equipment!
Moded'emploi......................p.15
Veuillez lire cette notice avant d’utiliser Is systeme!
lstruzionlperl’uso...................p.21
Prima di utilizzare l’appareochio, Ieggere il manuale!
Mododeempleo p27
Antes de utilizar eI equipo, sirvase leer eI manual!
Instruqéesdeuso p33
S,f.f. Ieia este manual antes de usar o equipamento!
FCC ID: E9MGB4OII
DRAFT
» on su—ncx “MW,” e), “A “at s
Fcc Statement
This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Parts 74, 15,
and 90 of the FCC Rules. These limits are
designed to provide reasonable protec-
tion against harmful interference in a resi—
dential installation. This equipment gene-
rates, uses, and can radiate radio fre—
quency energy and, if not installed and
' used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this equip—
ment does cause harmful interference to
radio or television reception. which can
be determined by turning the equipment
off and on, the user is encouraged to try
to correct the interference by one or more
of the following measures:
' Fleorient or relocate the receiving
antenna.
- increase the separation between the
equipment and the receiver.
' Connect the equipment into an outlet
on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced
radio/TV technician for help.
Shielded cables and I/O cords must be
used for this equipment to comply with
the relevant FCC regulations.
Changes or modifications not expressly
approved in writing by AKG Acoustics
may void the user‘s authority to operate
this equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and
(2) this device must accept any inter-
ference received, including interference
that may cause undesired operation.
1 Safety and
Environment
1.1 Safety
1. Do not expose the equipment to
direct sunlight. excessive dust, moi—
sture, rain, mechanical vibrations, or
shock.
1.2 Environment
14 Be sure to dispose of used batteries
as required by local waste disposal
rules. Never throw batteries into a fire
(risk of explosion) or garbage bin.
2. When scrapping the equipment,
remove the batteries, separate the
case, circuit boards, and cables, and
dispose of all components in accord»
ance with local waste disposal rules.
, ca aU'hi'x “new“ Luau cm was J
2 Description
2.1 Introduction
Dear Customer:
Thank you for purchasing an AKG
product. This Manual contains important
instructions for setting up and operating
your equipment. Please take a few
minutes to read the instructions below
"carefully before operating the equip-
ment. Please keep the Manual for future
reference. Have fun and impress your
audience!
2.2 Unpacking
1 GB 40 1 long
transmitter adapter
1 black
Check that the package contains all the
parts listed above. If anything is missing,
please centact your AKG dealer.
2.3 Optional Accessories
CU 40 charger
2.4 Description
The GB 40 is a WMS 40 microtools
Series miniature transmitter that has
been specifically designed for electric
guitars and basses but is also suited for
keyboards.
The transmitter features a permanently
attached, swiveling 1/ " jack plug that
allows you to plug the transmitter directly
into the output jack of your instrument. A
built-in spring presses the transmitter
against the instrument to hold it securely
in place. The bottom of the transmitter is
fitted with a soft plastic pad that will leave
no trace on the instrument.
The GB 40 operates on a single fixed,
quartz stabilized carrier frequency in the
710 MHz to 865 MHz UHF band and
uses a permanently attached flexible
antenna. ’
The color of the battery cover indicates
the carrier frequency of your transmitter:
You can replace the color code battery
cover with the supplied black replace-
ment cover.
2.5 Controls (Refer to fig. 1)
1 ON/MUTE/OFF: This slide switch
provides three positions:
ON: Power to the transmitter is on.
M: The signal delivered by the micro-
phone is muted while power and the
RF carrier frequency remain on. This
prevents the receiver from respond-
ing to interference from other trans-
mitters.
Fig. 1: GB 40 controls.
10
OFF: Power to the transmitter is off.
Battery compartment for one 1.5—V
AAA size battery (supplied).
The color of the battery compartment
cover indicates the carrier frequency
of your transmitter:
Frequency Color
MHz reddish brown
734.600 MHz ur le
KR3: 745.650 MHz mint reen
KR4: 750.900 MHz dark ra
EU62: 802.525 MHz Bordeaux red
EU63: 312.800 MHz ellow
SP1: 848.750 MHz Ii ht blue
SP2: 851.750 MHz yellowish green
354.900 MHz violet
858.200 MHz reen
ISMt: 863.100 MHz melon yellow
ISM2: 864.375 MHz gray
Status LED: indicates battery status.
LED flashes momentarily upon switching
ON and extinguishes: battery is OK.
LED lights constantly: battery will be
dead in about 60 minutes.
Input Gain: This rotary pot sets the
sensitivity of the transmitters audio
section.
Charging contacts for charging a
rechargeable battery inside the bat-
tery compartment using the optional
CU 40 charger.
Jack plug: 1/ " TS jack plug for
plugging the transmitter directly into
an instrument output jack.
Flexible antenna
l 3.1 InsertlnglReplaclng and
Testing the Battery
Refer to fig. 2:
1. Depress the snap hook on the battery
compartment lid (1).
2. Pull the battery compartment lid (1)
down to remove it from the transmitter.
3. If there is a dead or defective battery
' inside the battery compartment,
remove the battery.
4. Insert the supplied or new battery (2)
into the battery compartment as
shown in fig. 2.
5. Set the ON/MUTE/OFF switch (3) to ON.
The status LED (4) will flash momentar-
ily. If the battery is in good condition,
the status LED (4) will extinguish.
If the status LED (4) lights constantly
the battery will be dead within about
60 minutes. Replace the battery with
a new one as soon as possible.
If the status LED (4) fails to flash
momentarily the battery is dead.
Insert a new battery.
6. Slide the battery compartment lid (1)
onto the transmitter against the
direction of the arrow to the point that
the lid (1) will click shut.
3.2 Using Rechargeable Batteries
Refer to fig. 3:
Fig. 2: Inserting the battery.
Fig. 3: Using the CU 40 optional charger
‘ 11
instead of dry batteries, you can also
use a 1.5-V rechargeable battery to
_ the output jack (3) on your instru-
4 Operatmg Notes ment.
Power the transmitter. We recommend 1 Attaching the The spring inside the transmitter will
§°°r°°t°°11 hours (dry battery)
>6 hours (rechargeable battery)
1050 mV/1 kHz
76 x20 x 28 mm (3 x 0.8 x1.1 in.)
28 g 11 oz.)
Conn/a 0174 Ewa0065;4;72,Ewo4wa—) VHJMKMQ
14
Efifioast—z V 44,4 (o;_2090)
Hiermit erklért AKG Acoustics GmbH,
dass das Produkt was 40 die wesent-
Iichen Aniorderungen und sonstigen ein—
schlagwgen Bestimmungen der Richllinie
1999/51EG erffillt.
AKG Acoustics GmbH hereby declares
that the product WMS 40 complies wixh
the essemial requirements and other
relevant pmvislons al Directlve
1999/5150.
AKG Acoustics GmbH déclare que la
produn WMS 40 saxisfait aux exigenoes
essenciais e as outras disposiqées rele-
vantss da Dlrectiva 1999/5/CE.
AKG ADOUSUCS GmbH verklsan meimse
cat het product WMS 40 aan de essen-
(iéle eisen en ovsrige desbetrefiende
bepalingen van de ricmliin 1999/sz
voldoet.
AKG Acoustics GmbH erklara hermec
at produklel WMS 40 overholde de
vasenlliga krav ‘samt andrs relevants
beslemmelser "a Direktiu
1999/51EFA
essemielles st autres dwsposiuons y rela-
tives ds Ia Directive 1999/51CE.
Con la presents AKG Acoustics GmbH
dichisra Che iI prodofio WMS 40 6 con-
a-w-w ‘
mmamufm '4‘ awn-M
mum‘s-04m“
Wm»
‘wm
. m
AKG Acoustics GmbH srklerer med
dens, at produktet WMS 40 oppfyusr de
vesenflige krav og andre rslevame
bestemmelser som lremgflr av Dirsktiv
Vorme alle vichieste essenziali e alle alive 19991515.
25381358: ”mm“ “M D'm'wa Harmed forklarerAKG Acoustics GmbH W“ “m
' an produkten WMS 40 uppfylla de Wm Mg“ 0-1;
AKG Acoustics GmbH dsclara que el vaaentliga krav och andra relevan‘a Mm
“WA...“—
bsstémmelser som iramgér av Direktiv
1999/5150.
AKG Acoustics GmbH vakuuttaa. ené
matteemme WMS 40 téyttéfl tarvittavat
|999I51E0 dwektiivin mukaiset vaali-
mukset.
pmdudo WMS 40 cumpls Ios requisites
esencials y otras disposiciones aplica-
bles de la Directive 1990/5105.
A AKG Acoustics GmbH declare que o
produto WMS 40 cumpm os mqulsilos
/\
gm mm —» ”Sow 52d
”aeqoh km
“W900
A k’fi/(ELL L5
Que/IMLAKMJQ
Zur Verwendung in: Per I'uso in: Voor het gebruik in: M5 anvendes i:
For use in: Para eI uso en: Mé anvendes i: Kéiyttéiin seuraavissa
Pour l'usage en: Para 0 use em: Far anvi-indas i: maissa:
R&T‘I‘Ed Countrles
Set MHz AT BE CH DE DK Es FR Ll GB GR|IE ls IT LU N0 NL PT SE FI
0354 710.4 ////--.//--//././---/-
usss 7345 /// — - J/ - - /./././ — - - ./-
EU62 802.525— - ///-//- -/.///./- -//
EU63 812.8—-//./-/./—-/.////-—//
UK69A 854.9 -/.//- -[-/./-/J-/- - -/-
UKGQB 858.2 - ./ l / - — - I / - / J - / - - - / -
ISM1863.1J/l/J-J/J-IJ-Jll—ll
ISM2 864.375/////-././/-/./-///-//
SP1 848.750 - - - - - / - - - - - - - - - - - - --
SP2 851.750 - - - - ~ I - - - - - - - - - - - - --
‘_KR3 745.650
KR4 750.900 1
50 %
PM; 0576 01,29
B£%I;GUCV/
Sed,sea,Kes,l
Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:11:19 15:40:33+01:00
Create Date                     : 2001:09:05 16:58:59+02:00
Page Count                      : 10
Has XFA                         : No
Mod Date                        : 2003:11:19 15:40:33+01:00
Creation Date                   : 2001:09:05 16:58:59+02:00
Author                          : tr
Producer                        : Acrobat PDFWriter 4.0 für Windows
Metadata Date                   : 2003:11:19 15:40:33+01:00
Title                           : Seiten)
Creator                         : tr
EXIF Metadata provided by EXIF.tools
FCC ID Filing: E9MGB40II

Navigation menu