AKG Acoustics DHT70 Digital Wireless Microphone Transmitter (DHT70) User Manual QSG DMS 70 V2 Uebersetzung des
AKG Acoustics GmbH Digital Wireless Microphone Transmitter (DHT70) QSG DMS 70 V2 Uebersetzung des
Contents
- 1. Short user manual page 1
- 2. Short user manual page 2
Short user manual page 2
Fitting the receiver in a 19" rack. Connect receiverto the mains Leave one unit space tree between two receivers in the rack. Connect the sum output (at to a monltor Remove battery cover (14 / 22; compartment racing away lrem the pony. ignment Channel Ass Reduce audio level (2) and connect receiver in SWiteh on receiver (15) and transmitter (1) Assignment can be started horn both the transnimer and receiver ln this example, it is started lruni the receiver balanced input (10). Press CONNEflT (3) on a tree channel oi the receiver and rtnld down until the STATUS LED (5) mm h) ilastt alter approximately 2 seconds. Press CONNECT (16) on the transmitter until STATUS LED (13) lights up green. The smus LEns on the transmitter 113i and the receiver (5) light up green once assignment has been successlui. fi fi 1. U, Insert batterles Registration can he started lmm bath the transmitter and receiver ln this example it is started lmnr the Hold down CONNECT 13) on a lree channel oi the recelver transmitter until the STATUS LED (5; lights up green Mitch on the receiver Press CONNECT (16) along with ONIOFF (1 5] on the transmitter urrfil STATUS The STATUS LEI): on the transmitter (13)an|i the receiver LED 113) starts to flesh gulckly (Si light up green after successlul registration 0 Tips & Tricks 0 Tips & Tricks t Attach bndypack transmitter to a belt with the battery Connect Instrument or microphone to the mini XLR connector of the hodypacktransmltter In the case or microphones with a hypercardioid polar pattern, mast sound Adjust the input sensni'vity on the DP170 pocket transmitter using the screwdriver attenuation occurs at 180°. These microphones should therefore preferably be used included in the battery compartment saver, on the DH'I70 manual transmitter, use the where there is an interference noise source or a loudspeaker oirectiy opposite the slide control: speaker. Holding the microphone less than 5 cm train your month will give your lf CLIP lights up frequently. set the GAlN on the DH'I70 to LBW and reduce the voice a voluminous and punchy quality potentiometer setting an the DP'I70 e = —*= 2 Q 1-1 55 s «58 3: S4} =° OE <0 Switch on recelver (1) and transmitter (1 5; Check channel by pressing connect on the transmitter 115) or receiver (3). The STATUS LED: or the transmitter list and receiver (5) an the same channel will flash Page 2 0 Tips & Tricks AUTO CORRECHDN LUW MID HIGH Set AUTO CORRECTION (8) h) Law in normal operating mode lf there is interference in the 2.4 EHZ iSM trequency range, set AUTO cURREc‘TIUN to MID or man Never let more than 2 people sing Into one microphonerhe angle of incidence should never be more than 35“! hue 3
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-702 Creation Date--Text : Producer : Corel PDF Engine Version 2.0.0.479 Mod Date--Text : Format : application/pdf Creator : rsieghart Title : QSG_DMS 70_V2_Uebersetzung.des Creator Tool : Corel DESIGNER Version 12 Modify Date : 2011:11:16 12:03:10+01:00 Metadata Date : 2011:11:16 12:03:10+01:00 Document ID : uuid:3f03f420-6705-44a9-86d8-bdbb314f0569 Instance ID : uuid:9ef67658-6bbb-4dfb-820c-3994436ce227 Has XFA : No Page Count : 1 Create Date : D:20110802070410 Author : rsieghartEXIF Metadata provided by EXIF.tools