| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 57739 |
| Application ID | RWa59xp89flBTfCDzSBf4g== |
| Document Description | 8 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 4.86kB (60731 bits) |
| Date Submitted | 1999-09-02 00:00:00 |
| Date Available | 1999-10-06 00:00:00 |
| Creation Date | 2001-05-31 08:17:17 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-05-31 08:17:22 |
| Document Title | 57739.pdf |
| Document Author: | VicodinES /CB /TNN |
DLSSEl-lszomb uA
%CELEST[CA_ Technical Services DOC No. TBLoooos
Issue 1.2
ALCATEL MUI BOARD INSTALLATION
Before you start.
N?
as." Jaw
6.
Take every possible precaution against static electricity as you prepare to install the UA
Alcatel MUI board. Static can damage components. Wear an anti-static wrist strap while
installing the board. You should also try to work in a static free area (such as on e Tile floor
rather than a carpet), You might even consider wearing speclal ESD. or rubber-soled shoes.
Save any work in progress and exit any open application Always backup your system before
you install new hardware.
Turn off and unplug the power source for your system and each of its peripherals.
Remove the cover from your system so you can access the PCI slots. (see your system
documentation for details.)
Determine which slot you are 90th to use and remove its blank back panel cover.
Attach the anti-static strap to your wrist. and attach the other end to a bare, conductive
(as opposed to painted or sticker—covered) area of your system’s chassis.
Remove the Alcatel MUI board from its anti-static packing,
Place the card mm the PCI slot, and seat ll firmly. (see your system documentation for
instructions on securing the card to the chassis.
! Note, Hot components, care should be taken as some components can operate at a
high temperature.
Connect the power cable supplied (Part no. TCK00021) to CN1 on the Alcatel MUI board
and the other end the power source. Route the cable clear of the board and secure it
necessary.
! Care should be taken to ensure the power supply can match the user requirements for
multiple and single board installation.
Remove the anti-static strap and replace the cover on your system.
General Specifications.
Feature 1 Function Implementation
Card size Full length PCI
Power requirements 5Vdc @ 5W , 12Vdc @ 25W
Maximum permissible current rating of the 12V
supply to the board is 50A.
Ambient temperature 40 “C Max
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.3
Linearized : Yes
Create Date : 2001:05:31 08:17:17
Producer : Acrobat Distiller 4.0 for Windows
Author : VicodinES /CB /TNN
Title : 57739.pdf
Modify Date : 2001:05:31 08:17:22-04:00
Page Count : 2
EXIF Metadata provided by EXIF.tools