ALE 8068 IP Phone User Manual G VENLIK VE Y NETMELIK TALIMATLAR

Alcatel-Lucent Enterprise IP Phone G VENLIK VE Y NETMELIK TALIMATLAR

User Manual

SAFETY AND REGULATORY INSTRUCTIONS Alcatel-Lucent 8028 , 8038 and 8068 Premium Deskphones English Safety Instructions • Changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • Magnets could affect the functioning of pacemakers and implanted heart defibrillators. Keep a safe distance between your pacemaker or implant defibrillator and the handset which includes magnetic elements: 4 cm / 1.6 inches at least. • To limit the risk of interference, people with pacemakers must keep the Bluetooth® Wireless Handset away from their equipment (minimum distance of 15 cm/6 inches). • It is recommended to follow the standard acceptance procedures before using this equipment in human safety critical areas (hospitals...). • The handset includes magnetic elements that may attract sharp metallic objects. To prevent injury, before each use ensure sharp metallic objects are not stuck to the earpiece and microphone. • There is a danger of explosion if the battery is replaced incorrectly - use only the battery with the reference: 3GV28041AB (1.2V 1500 mAh) (Bluetooth® Handset only). • Battery charge (Bluetooth® Handset only): Charge the battery for about 16 hours before initial use. • Avoid using phones (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. • Do not use the device in environments where there is a danger of explosion. • Do not plug this phone into an Integrated Services Digital Network (ISDN) connection or into a regular Public Switched Telephone Network (PSTN) connection. This can result in severe damage to the phone. • Never allow your telephone to come into contact with water. • To clean your telephone, use a soft damp cloth. Never use solvents (trichlorethylene, acetone, etc.) which may damage the plastic parts of your telephone. Do not use aerosol cleaners. • This product is intended to be supplied, either via the Ethernet (LAN) port (Minimum Class 2 according to IEEE802.3af), or via the DC-in port by an approved and “LPS” (Limited Power Source) Power Supply according to CSA/UL/IEC 60950-1 and rated 48V dc, minimum 0.27A . Allowed power supplies: WA-13B48R from Asian Power Devices Inc. • If you are connected to a POE connection do not use AC power supply. Regulatory Statements Marking This equipment is in compliance with the essential requirements of R&TTE Directive 1999/5/EC and with Directive 2011/65/UE (ROHS). The Declaration of Conformity may be obtained from: Alcatel-Lucent 3 avenue Octave Gréard 75007 Paris, France ebg_global_supportcenter@Alcatel-Lucent.com. USA and Canada This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet équipement est conforme à l’article 15 des réglementations FCC ainsi qu’à la norme CNR-210 d'Industrie Canada. L'exploitation est autorisée aux deux conditions suivantes:(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules and ICES-003 of Canada. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by consulting the dealer. Exposure to Radio Frequency Signals for 8068 Premium DeskPhone and Bluetooth® Handset : The radiated output power of the device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized. This equipement complies with the internationally recognized radiation exposure (SAR) limits of 1.6W/kg. User Instructions Use this product in temperatures between -5°C to +45°C (23°F to 113°F). This product is intended for use in an indoor environment only. This apparatus is Hearing Aid Compatible (HAC). Acoustic shock protection Maximum sound pressure level for handset is compliant with European, US and Australian standards. Directive 2003/10/EC specifying the risks inherent in noise at work The ring contributes towards overall daily noise; at its maximum setting, the level is 105 dBA at 60 cm from terminal. To reduce the level, the following is recommended:- reduce the setting (9 levels of 5 dB) - program a progressive ring. Privacy Privacy of communications may not be ensured when using the Bluetooth® handset or any additionnal Bluetooth® device. Disposal The equipment must be returned to a collection point for electronic equipment waste disposal. Defective batteries must be returned to a collection point for chemical waste disposal. Wall-mounting (optional) The phone can be wall mounted when required. For full instructions regarding wall mounting, refer to Installation Manual. Related Documentation Other languages for this Safety and Regulatory Instructions and User Documentation are available at the following Web site http://enterprise.alcatel-lucent.com?product=All&page=Directory.

Navigation menu