ALFA NETWORK 121 802.11bgn AP/Router User Manual

ALFA NETWORK Inc. 802.11bgn AP/Router

user manual

AP121U 802.11n AP/Router Copyright 2011 Alfa Networks Inc. All Rights Reserved Changes to specifications and descriptions may change at any time without prior notice Features: •High Speed Data Rates Providing faster data rates of up to 150Mbps and is compatible with legacy 802.11b/g equipment •Advanced Robust Security Firewall with SPI to protect the internal host from hacker attacks. Wireless security is comprehensive and included WPA/WPA2 PSK •Feature Rich WDS, Dual SSIDs, Static Routing, QoS and more Application: on:
AP121U 802.11n AP/Router Copyright 2011 Alfa Networks Inc. All Rights Reserved Changes to specifications and descriptions may change at any time without prior notice Specification Standard IEEE 802.11b/g/n Operation Mode Router Bridge Wireless ISP Antenna 5dBi detachable antenna Frequency Band 2.400GHz ~ 2.484GHz Security 64/128bit WEP WPA(TKIP with IEEE 802.1x) WPA2(AES with IEEE 802.1x)WPA MixedData Rate 802.11n ( 40MHz ): up to 150Mbps 802.11n ( 20MHz ): up to 72Mbps 802.11g: 54,48,36,24,18,12,9,6Mbps 802.11b: 11,5.5,2,1Mbps Sensitivity 802.11b 11Mbps: -90 802.11g 54Mbps: -75 802.11n ( 20MHz) MCS7 : -71 Tx Power 802.11b: 20dBm² 2 802.11g: 20dBm ² 2 802.11n: 20dBm ² 2 Interface RP-SMA antennas connector x 1 RJ-45 WAN port x 1 RJ-45 LAN ports x 1 USB Port x 1 Power requirement DC Jack: 12V DC PoE: 12V Passive PoE Operation Temperature -20±C ~ 60±C Storage Humidity 10% ~ 90% (Non-condensing) Dimension 93 x 70 x 26 mm Weight 74g Physical Description: Back View Front View
L*H=32*38mm 802.11b/g/n AP/Router M/M: AP121 FCC ID: UQ2121 IC ID: 2279B-NOIRE010E Declaration: This device have no Ad Hoc Mode. System Requirements  Broadband Internet Access Service (DSL/Cable/Ethernet)  One DSL/Cable Modem that has an RJ45 connector (which is not necessary if the Router is connected directly to the Ethernet.)  PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors  TCP/IP protocol on each PC  Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari Installation Environment Requirements Place the Router in a well ventilated place far from any heater or heating ventAvoid direct irradiation of any strong light (such as sunlight)Keep at least 2 inches (5 cm) of clear space around the RouterConnecting the Router Before installing the Router, make sure your PC is connected to the Internet through the broadband service successfully. If there is any problem, please contact your ISP. After that, please install the Router according to the following steps. Don't forget to pull out the power plug and keep your hands dry. 1. Power off your PC, Cable/DSL Modem, and the Router. 2. Locate an optimum location for the Router. The best place is usually at the center of your wireless network. 3. Adjust the direction of the antenna. Normally, upright is a good direction. 4. Connect the PC(s) and each Switch/Hub in your LAN to the LAN Ports on the Router. (If you have the wireless NIC and want to use the wireless function, you can skip this step.) 5. Connect the DSL/Cable Modem to the WAN port on the Router. 6. Connect the power adapter to the power socket on the Router, and the other end into anelectrical outlet. Press the power switch, and then the router will start to work.7. Power on your PC and Cable/DSL Modem.
L*H=32*38mm 802.11b/g/n AP/Router M/M: AP121 FCC ID: UQ2121 IC ID: 2279B-NOIRE010E FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. INDUSTRY CANADA CONFORMITYThis device has been tested and found to comply with the limits specified in RSS-210. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.This Class [B] digital apparatus complies with Canadian ICES-003. DECLARATION DE CONFORMITE D’INDUSTRIE CANADACe périphérique a été testé et reconnu conforme aux limites spécifiées dans RSS-210. Son utilisation est soumise aux deux conditions suivantes : (1) il ne doit pas provoquer d’interférences gênantes et (2) il doit tolérer les interférences reçues, notamment celles susceptibles d’en perturber le fonctionnement.Cet appareil numérique de classe [B] est conforme à la norme canadienne ICES-003.

Navigation menu