ALL BEST TECHNOLOGY HS1-QI Bluetooth Speaker System with Alarm Clock Wireless Charging Station User Manual 311 XXX A0 THS1qi BAS T1WC 180313
All Best Technology Limited Bluetooth Speaker System with Alarm Clock Wireless Charging Station 311 XXX A0 THS1qi BAS T1WC 180313
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3846846 |
| Application ID | xCW0GJxiNLYToE2aDB7S4A== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 244.34kB (3054199 bits) |
| Date Submitted | 2018-05-11 00:00:00 |
| Date Available | 2018-05-11 00:00:00 |
| Creation Date | 2018-03-13 17:25:30 |
| Producing Software | Adobe PDF library 10.01 |
| Document Lastmod | 2018-05-02 15:32:25 |
| Document Title | 311-XXX A0 THS1qi(å”å¹´BAS-T1WC)180313 |
| Document Creator | Adobe Illustrator CS6 (Windows) |
HS1-qi Wireless Charging with Bluetooth Speaker TIPS / IMPORTANT: All safety and operation instructions should be read thoroughly before proceeding and please keep the handbook for future reference. IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body INFORMATION SPECIFICATIONS Bluetooth Specification: 4.2+EDR Bluetooth Profiles: HSP、HFP、A2DP and AVRCP Operating Distance: 10 meters Class II Output Power: 3W+3W Driver Unit: 4Ohm 3w 2in Frequency Range: 40Hz-20KHz S/N Ratio:＞65dB Distortion Rate:＜1% FM Frequency Range: 87.5-108MHz UNIT FEATURES & FUNCTIONS USB MODE FM FREQUENCY ALARM TIME SLEEP TIME SETTING TIME SETTING TIME SETTING UNIT FEATURES & FUNCTIONS USB MODE USB Play Mode BLUETOOTH Bluetooth Mode Alarm Setting,On/Off NEXT SONG/Adjusting Alarm Time Skip Forwards Next Song/Adjusting Alarm Time VOLAUX IN AUX IN Mode PLAY/PAUSE,TALK,SCAN FM Bluetooth&USB,Play/Pause,Answer the phone and Hang up,Auto scan FM station FM FM Mode BACKWARD SONG/Adjusting Alarm Time Skip Backwards last song/Adjusting Alarm Time Wireless Charging Wireless Charging Station BASIC HS1-qi OPERATION Press “ ”to put Bluetooth on. Go to moblie setting, turn on Bluetooth and search Bluetooth devices. Connect “HS1-qi”. When it is successfully paired,you will hear a sound of“DU”. Play music from your mobile now.(when Bluetooth is connected,press “ ”or other mode key to switching it to other mode, Bluetooth will be OFF automatically and get disconnected with mobile. When switching it to Bluetooth mode again,connect“HS1-qi”manually or automatically.) socket ANSWER THE PHONE SET ALARM TIME When alarm is off, press “ “ to set alarm time. Press “ ” or “ “ to adjust alarm time. It will confirm and exit setting in 5 seconds if no operation on any key. When a phone call is coming, press“ answer the phone. ”to HANG UP Press “ call. ”to hand up when having a phone PLAY MUSIC When palying music, press“ ”to pause the music. Press“ ” to skip backwards last song; Press“ ” to skip forwards next song. snooze.Alarm 3) or press and hold Press“ ” to put FM Radio on, “ ” appears on the LCD display. Press and hold “ ” to auto scan radio station and store the scanned stations BASIC accordingly.The frequency starts from 87.5MHz to 108MHz and skips at every 0 .1 MHz in scanning process. Once catching a station , it stops a second and store it , then continues the auto-scanning. When it scans from 87.5MHz to 108MHz, it will stop scan automactically. Press“ ” or “ ”to select the station. Back-up the lithium battery The 3.7V lithium battery is to retain the clock/alarm in case of a power failure. It can not display the alarm/clock time when battery is low,need charge. Press“ ” to put AUX IN on, “ ” appears on the LCD display. Pug in the 3.5mm audio cable into the AUX IN jack. Play music now. Infrared remote control(Option) Install the battery: Unscrew the back cover of the remote control, open the screws, install 3 pieces AAA battery, lock the screw and screw the back cover. Sync time with phone: Unscrew the back cover of the remote control, connect the remote control's lightning connector to the iPhone interface. In this way, the time will be synced with iPhone. Sync time with the reomte control: Align the remote control with the alarm screen,press the sync button on the remote control, the time of the remote control will be transmitted to the alarm clock and turn off the alarm, reset the alarm. WIRELESS CHARGE CARE AND MAINTENANCE / FAQs 10 NOTICE Backup battery was low, so please charge it. * Please comply with the actural product if there is any discrepancy between the product and the content of the manual 11 Homtime Group LTD info@homtime.com www.homtime.com www.facebook.com/homtime.global
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Create Date : 2018:03:13 17:25:30+08:00 Metadata Date : 2018:05:02 15:32:25+08:00 Modify Date : 2018:05:02 15:32:25+08:00 Creator Tool : Adobe Illustrator CS6 (Windows) Thumbnail Width : 256 Thumbnail Height : 36 Thumbnail Format : JPEG Thumbnail Image : (Binary data 3796 bytes, use -b option to extract) Instance ID : uuid:aebe9068-671f-4d14-96a4-eca9aad2a0bb Original Document ID : xmp.did:6B550D2EA4D9E311B8B8BFF17CF12A20 Document ID : xmp.did:38F1B376A026E811BCF4CEACFDC12773 Rendition Class : proof:pdf Version ID : 1 Derived From Instance ID : uuid:7520e47f-5f52-44b6-8415-ee89660d672c Derived From Document ID : xmp.did:F61FB198FAFCE711B8C58497EC007C67 Derived From Original Document ID: xmp.did:6B550D2EA4D9E311B8B8BFF17CF12A20 Derived From Version ID : 1 Derived From Rendition Class : proof:pdf History Action : converted, saved, saved History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2014 (Windows), Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows) History Changed : /, /, / History When : 2017:01:04 17:48:43+09:00, 2017:01:17 09:35:46+08:00, 2018:03:13 17:25:26+08:00 History Instance ID : xmp.iid:52C1994455DCE6118AC3D93225077D21, xmp.iid:38F1B376A026E811BCF4CEACFDC12773 Format : application/pdf Title : 311-XXX A0 THS1qi(唐年BAS-T1WC)180313 Producer : Adobe PDF library 10.01 Trapped : False GTS PDFX Version : PDF/X-3:2002 GTS PDFX Conformance : PDF/X-3:2002 N Pages : 1 Has Visible Transparency : False Has Visible Overprint : True Max Page Size W : 99.998375 Max Page Size H : 99.998375 Max Page Size Unit : Millimeters Font Name : Swiss721BT-Roman, ArialMT, Arial-ItalicMT, Arial-BoldMT, Calibri-Light, SimHei, STXihei, AdobeSongStd-Light, MicrosoftYaHei Font Family : Swis721 BT, Arial, Arial, Arial, Calibri, 黑体, 华文细黑, Adobe 宋体 Std, 微软雅黑 Font Face : Roman, Regular, Italic, Bold, Light, Regular, Regular, L, Regular Font Type : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 1.01 emb4-OT, Version 5.06, Version 5.06, Version 5.06, Version 2.10, Version 5.01, Version 1.02, Version 5.010;PS 5.002;hotconv 1.0.57;makeotf.lib2.0.21895, Version 6.02 Font Composite : False, False, False, False, False, False, False, False, False Font File Name : tt0003m_.ttf, arial.ttf, ariali.ttf, arialbd.ttf, Calibri_Light.ttf, simhei.ttf, STXIHEI.TTF, AdobeSongStd-Light.otf, msyh.ttf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE Black C 2, PANTONE 300 C, PANTONE Cool Gray 11 C, PANTONE Black C, PANTONE Black C 1 Swatch Group Name : 默认色板组 Swatch Group Type : 0 Swatch Colorant Swatch Name : PANTONE Cool Gray 11 C, PANTONE 300 C, PANTONE Black C 2, PANTONE Black C 1, PANTONE Black C, PANTONE Cool Gray 9 C, PANTONE Cool Gray 4 C, PANTONE 877 C, AutoCAD Color Swatch Colorant Type : SPOT, SPOT, SPOT, SPOT, SPOT, SPOT, SPOT, SPOT, PROCESS Swatch Colorant Tint : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000 Swatch Colorant Mode : Lab, Lab, CMYK, CMYK, Lab, Lab, Lab, Lab, CMYK Swatch Colorant L : 36.470600, 35.686298, 17.254900, 50.196098, 76.078400, 59.607800 Swatch Colorant A : 0, -10, 0, 0, 0, -1 Swatch Colorant B : -3, -62, 2, -2, 0, -1 Swatch Colorant Cyan : 63.999999, 65.999997, 92.971700 Swatch Colorant Magenta : 61.000001, 63.999999, 87.972802 Swatch Colorant Yellow : 63.999999, 66.999996, 89.019603 Swatch Colorant Black : 52.999997, 66.999996, 79.998499 Page Count : 12 Creator : Adobe Illustrator CS6 (Windows)EXIF Metadata provided by EXIF.tools