ALPS ALPINE 9ZUA140 G500-7 BT PWB User Manual G500 7 i
Alpine Electronics Inc G500-7 BT PWB G500 7 i
UserManual.wiki
>
ALPS ALPINE
>
9ZUA140 User Manual
>
User manual_G500_7
Contents
1.
user manual
2.
User manual_G500_7
User manual_G500_7
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![16-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Easy Sound Setting by Car Type (i-Personalize)Car Specific Sound SetupThis function lets you set and reproduce the best audio environment for the environment in your car.On the unit, select and set the car category/steering wheel position/speaker type and size/seat material.For details of how to configure the settings, refer to “Car Specific Sound Setup” (page 23).Display example when setting is completedCar Specific Sound Setup (EASY SETUP)Simply by selecting a car type from the list registered to the INE-W927HD, the audio environment that is most appropriate to the car type is automatically set.For details of how to configure the settings, refer to “Car Specific Sound Setup (EASY SETUP)” (page 24).About Dual ScreenIf you want to display the music playback screen while route guidance is displayed, etc., you can display the Navigation and Audio/Visual screens simultaneously.*1During video playback, [Dual Wide], [Dual Full] and [Full Screen] appear on the screen for selecting the screen size. For details, refer to “Switching the Dual Screen Display” (page 25).Audio/Visual Full screenNavigation Full screenDual ScreenPress the (SOURCE) button.Touch *1Touch Press the (MAP) button.Touch the Navigation screen portion.oror01GB00INE-W927HD.book Page 16 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-16.png)
![18-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Accessory List•INE-W927HD .......................................................................1•Power cable.........................................................................1•Flush head screw (M5×8)....................................................6•Screw (M5×8) ......................................................................8•GPS Antenna .......................................................................1•Antenna mounting plate ......................................................1•Cable clamp ........................................................................3•AUX/PRE OUT cable ...........................................................1•Camera cable ......................................................................1•USB extension cable ...........................................................1•iPod/iPhone Connection Cable............................................1•iPod VIDEO AV extension cable ..........................................1•Microphone..........................................................................1•Owner’s Manual ..............................................................1setLocation of Controls (MUTE) buttonPress to activate /deactivate the mute mode.Press and hold MUTE for at least 3 seconds to activate the “Setting the Balance/Fader/Subwoofer” mode./ (UP/DOWN)buttonPress to adjust the volume. (SOURCE) buttonDisplays the Audio/Visual screen. If the Audio/Visual screen is already displayed, changes the source. Press and hold for at least 3 seconds to turn the power off. (PHONE) buttonRecalls the Telephone Menu screen.When a hands-free phone is connected, press and hold for at least 3 seconds to switch to the call history screen. (My Favorites) buttonThe My Favorites screen for registered User 1 is displayed.Press and hold this button at least 3 seconds to switch to User 2. (MAP) buttonRecalls the navigation map screen.For details of navigation operations, refer to “Navigation System OM” in the CD-ROM. buttonRecalls the Open/Tilt screen. Executes display open/close, angle adjustment, and disc eject.RESET switchThe system of this unit is reset.Remote SensorPoint the remote control transmitter towards the remote sensor within a range of 2 meters.Turning Power On or OffSome of this unit’s functions cannot be performed while the vehicle is in motion. Be sure to stop your vehicle in a safe location and apply the parking brake and footbrake, before attempting these operations.1Turn the ignition key to the ACC or ON position.The system turns on.•When turned on, the system displays the last mode screen that was displayed before the ignition key was turned off. For example, if the unit is in radio mode when ignition is turned off, it will remain in radio mode when ignition is turned back on.2Press and hold the (SOURCE) button for at least 3 seconds to turn the power off.•The unit can be turned on by pressing any button.•The INE-W927HD is a precision device. Careful handling of the unit should provide you with years of trouble-free operation.Getting StartedOptional Remote Control Interface BoxThis unit is operable using the vehicle’s secondary radio controls. An Alpine Remote Control Interface Box (optional) is required. For details, contact your Alpine dealer.Controllable with Remote ControlThis unit can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer. Point the optional remote control transmitter at the remote control sensor.About the button descriptions used in this Owner’s ManualThe buttons found on the face of the unit are expressed in bold (e.g. (My Favorites)). The buttons found on the touch-screen display are shown in bold within brackets, [ ] (e.g. [ ]).01GB00INE-W927HD.book Page 18 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-18.png)
![19-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESTurning the System OnWith the Alpine system, when the ignition key is turned to ACC or ON, the opening screen will be automatically displayed.1When the system is used for the first time, the language selection menu is displayed. There are 21 languages to choose from. Touch [ ] or [ ] to scroll the list, and then touch the desired language.•You can also scroll through lists by touching the screen and sliding your finger up and down.2Touch [OK].The radio screen is displayed.•Some of this unit’s functions cannot be performed while the vehicle is in motion. Be sure to stop your vehicle in a safe location and apply the parking brake before attempting these operations.Initial System Start-UpBe sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc.1Turn off the unit power.2Press RESET switch with a ballpoint pen or similar pointed object.Inserting/Ejecting a Disc1Press (Eject).The Open/Tilt screen is displayed.2Touch [Open].3Insert the disc with the label side facing up.Insert the disc until it is automatically pulled into the unit. The unit starts to play the disc.*The SD memory card does not support Music/Video playback.For details on how to use SD memory cards, refer to “Navigation system OM” on the supplied CD-ROM.•Insert the SD memory card into the slot until it is locked.If the SD memory card is not inserted properly, the monitor cannot be closed.1Press (Eject).The Open/Tilt screen is displayed.2Touch [ Disc].The monitor will open. Then the disc is ejected.When the disc has been ejected part way, take it out.3Touch [Close], or press (Eject).•If the disc does not eject after touching [ Disc], press and hold (Eject) for at least 5 seconds.•Do not apply shock to the monitor when it is open as it may result in malfunction of the unit.•The monitor will stop at the set tilt angle when closing.Adjusting the Monitor Viewing AngleAdjust the monitor’s angle for better visibility.1Press (Eject).The Open/Tilt screen is displayed.2Touch [ Up] or [ Down] of “Tilt” to adjust the desired monitor angle.The monitor angle can be adjusted in 5 stages.3Touch [ ] to return to the normal mode.•The screen color will vary when viewed at certain angles. Adjust the screen angle for the best viewing position.•If the voltage of the vehicle’s battery power is low, the screen may blink when the screen angle is changed. This is normal and not a malfunction.Inserting the DiscRESET switchRemoving the DiscCAUTIONKeep hands (or any other object) away from the monitor while it is opening or closing to avoid damage or injury. The back of the monitor tends to become very warm under normal operating conditions. This is not a malfunction, but care should be taken to avoid prolonged contact with it.SD memory card slot*Disc Slot01GB00INE-W927HD.book Page 19 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-19.png)
![20-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Adjusting the VolumeAdjust the volume by pressing or .Volume decreases/increases continuously by pressing and holding or .Volume: 0 - 35Lowering Volume QuicklyActivating the Audio Mute function will instantly lower the volume level by 20 dB.1Press (MUTE) to activate the MUTE mode.The audio level will decrease by about 20 dB.2Pressing (MUTE) again will bring the audio back to its previous level.Using My FavoritesDisplay example of My Favorites screenUser name: Displays the name of the userMy Favorites icon: Touching an icon on My Favorites screen will switch to the screen for the selected application.Add button: Use to add (register) My Favorites icons (page 21)Edit button: Use to edit My Favorites (page 22)Camera button: Use to display the camera image (page 23)i-Personalize button: Use to configure the i-Personalize Setup (page 23)User RegistrationYou can register up to two users. Configure the User 1 and User 2 settings for each user.1Press the (My Favorites) button.The My Favorites screen is displayed.2Touch [Start].The user name input screen for the first user is displayed.•Touching [Skip] registers the user name as “USER 1” or “USER 2” and no BLUETOOTH device is registered. In this case, the users will not be switched automatically.•Touching [Cancel] or pressing the (My Favorites) button returns to the original screen without registering a user.3Input the user name from the keypad and touch [OK].The BLUETOOTH Device Setup screen is displayed.•Touch [ ] to edit the name.For details of how to input characters from the keypad, refer to “How to Input Characters and Numbers (Keypad)” (page 24).4Touch [Link], then touch [OK].The BLUETOOTH Device List is displayed.•The BLUETOOTH devices registered here are used to automatically identify the user.Also, a cellular phone can be used as a hands-free phone.For details, see “BLUETOOTH Setting” (page 55).•Touching [Do not Link] exits user registration without registering a BLUETOOTH device.01GB00INE-W927HD.book Page 20 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-20.png)
![21-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRES5Touch [Search].The system starts searching for BLUETOOTH devices.When the search is completed, the BLUETOOTH Device List is displayed.•Set the BLUETOOTH setting on the preregistered BLUETOOTH device side to “ON.”6Touch a registered BLUETOOTH device and touch [OK].My Favorites screen for USER1 is displayed.•You can edit My Favorites icons.For details of how to add, edit, delete or set My Favorites icons, refer to “Adding My Favorites” (page 21).Register User 27Press the (My Favorites) button.The My Favorites screen is exited and the display returns to the original screen.8Press and hold the (My Favorites) button for at least 3 seconds.The My Favorites user guide is displayed. Repeat steps 2 through 6 to register USER2.Setting My FavoritesConfigure the My Favorites settings.Press the (My Favorites) button.My Favorites screen for USER1 is displayed.•To configure My Favorites settings for USER2, press and hold the (My Favorites) button for at least 3 seconds. The My Favorites screen is displayed.You can register up to eight My Favorites for each user.You cannot, however, register the same items (categories).1Touch [ ].The addition items (categories) are displayed.2Touch the desired addition item (category).Current position : Registers your current position in My FavoritesCurrent source : Registers the audio source currently playing in My FavoritesNavigation : Registers the destination search category or nearby place search category in My Favorites[Specific Place] : You can display the places registered in My Favorites and set your destination.Search for a place registered in My Favorites by Address/Find Place/Address Book/History, then touch Add.[Quick Place search] : Displays the address search keypad[Help Nearby] : Displays the nearby search screen[POI category] : Displays the selected POI category list•For details of navigation operations, refer to “Navigation System OM” in the CD-ROM.Phone : Lets you register phone numbers registered in the phonebook in My Favorites for shortcut dialing.Select a name or phone number from the Phonebook list and touch [ADD].•Touch [ ] or [ ] to switch phone numbers.•You can only select PHONE when a mobile phone is connected.Audio/Visual : Lets you switch directly to an audio source[Radio]:HD-Radio/RBDS: You can register presets No. 1-6 in FM1/FM2/AM.Select presets No. 1-6 from FM1 preset/FM2 preset/AM preset.SiriusXM: You can register presets No. 1-6 in SiriusXM1, SiriusXM2 and SiriusXM3.Select presets No. 1-6 from SiriusXM1 preset/SiriusXM2 preset/SiriusXM3 preset.[Disc]/[USB/iPod]/[Pandora]/[BLUETOOTH Pandora]/[Aux-1]/[Aux-2]/[Aux-3]/[BT audio]: You can switch directly to any of these audio sources.Adding My Favorites01GB00INE-W927HD.book Page 21 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-21.png)
![22-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)You can delete names in My Favorites or change the layout.Touch [ ].“ ” appears and the mode switches to the Edit mode.•Touching [Cancel] returns to the previous screen without executing any changes.Changing the name1Touch the icon you want to changeThe Edit Text screen (Keypad) is displayed.2Enter the name and touch [OK]The mode returns to the Edit mode.3Touch [OK].The name is changed.Deleting Icons1Touch “ ” by the icon you want to deleteThe confirmation message is displayed.2Touch [OK].The mode returns to the Edit mode.3Touch [OK].My Favorites setupYou can change or delete the registered user name or change the registered phone number.Touch [Setup].The My Favorites Setup screen is displayed.Changing the User Name1Touch the [Name] of the user you want to change.The Input User Name screen (Keypad) is displayed.2Input the name and touch [OK].The user name is changed.•For details of how to input characters using the keypad, refer to “How to Input Characters and Numbers (Keypad)” (page 24).Changing a BLUETOOTH deviceYou can change the BLUETOOTH devices associated with a user.1Touch the user [Phone] you want to change.The BLUETOOTH Device Setup screen is displayed.2Touch [Link], then touch [OK].The BLUETOOTH Device list is displayed.•The BLUETOOTH devices set by User Registration are highlighted.For detailed settings, touch [Search].3Select the device you want to change and touch [OK].The device is changed.Deleting Registered Users1Touch [Delete] for the user name you want to delete.The confirmation message is displayed.2Touch [OK].•When a registered user is deleted, all the items affected by switching users are returned to the default settings.Changing the LayoutYou can change the layout of the shortcut keys.1Drag and drop the icon to the desired location.2Touch [OK].Editing My Favorites01GB00INE-W927HD.book Page 22 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-22.png)
![23-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESWhen a separately purchased camera is connected to the system, you can display the camera image.Touch [Camera].The camera image is displayed.•For details of camera operations, refer to “Camera Operation (Optional)” (page 70).•When the front camera (direct camera) and rear camera or side camera (AUX camera) are connected simultaneously, the screen for selecting which camera image to display appears.You can configure the audio settings by car type.Touch [i-Personalize].The i-Personalize Setup screen is displayed.Car Specific Sound SetupYou can set and reproduce the best audio environment for the environment in your car.1Touch [Car Specific Sound Setup].The vehicle type selection screen is displayed.2Touch the relevant Vehicle type.•The selected Vehicle type is reflected in the “i-Personalize” symbol on My Favorites screen.3Touch the position of the driver’s seat.4Touch the size of the front speaker.5Select whether or not there is a tweeter.6Select the installation position of the rear speaker.If you select “No rear speaker,” you cannot adjust the rear speaker in Fader/Time Correction/X-OVER in sound setup.7Select whether or not there is a subwoofer.If you select “No,” you cannot adjust the subwoofer level/subwoofer phase in sound setup.8Select the material of the car seats.The settings confirmation screen is displayed.•If the car seats are made of both leather and fabric, select [Half leather].9Check the settings and touch [OK].•If Preset3 was already saved for Time Correction/X-OVER/Parametric EQ, the data will be overwritten. •The Easy sound settings are reflected in the following Audio Setup items.Setting the MX (Media Xpander)-Adjusting the Parametric Equalizer Curve (Parametric EQ)Adjusting the Time Correction (Time Correction)Adjusting the Crossover Settings (X-OVER) (only when Subwoofer is set to “On”)The Equalizer Presets (Bass Max EQ) settings are disabled.Downloaded Sound SettingsUsing a USB memory device, the sound settings downloaded from the ALPINE website can be used to configure Time Correction, X-OVER and Parametric EQ settings. Setting item: Downloaded Sound SettingsThe file name of download data shall be “A_U*****.MP3.”•Save the setting data in the root folder.•For details about procedures of download, see ALPINE’s web site.1Touch [Downloaded Sound Settings].Setting data files are displayed in a list with a maximum of 5 items.2Touch the desired file.3Touch [OK].The downloaded setting values are set as the Time Correction/X-OVER/Parametric EQ settings, and at the same time saved as Preset3, respectively. •When no USB memory is connected, the “iPersonalize Setting” function is not available.•If Preset3 was already saved for Time Correction/X-OVER/Parametric EQ, the data will be overwritten. Displaying the Camera Imagei-Personalize SetupExtender (fixed)Identifier (alphabet or number 5 letters maximum)Header (fixed)01GB00INE-W927HD.book Page 23 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-23.png)
![24-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Simply by selecting a car type from the list registered to the INE-W927HD, the audio environment that is most appropriate to the car type is automatically set.1Touch [EASY SETUP].The car type selection screen is displayed.2Touch your car type on the list.3Touch [OK].The setup starts. When the message disappears, the setup is complete.•The Car Specific Sound Setup are reflected in the following Audio Setup items;-Setting the MX (Media Xpander)-Adjusting the Parametric Equalizer Curve (Parametric EQ)-Adjusting the Time Correction (Time Correction)-Adjusting the Crossover Settings (X-OVER) (only when Subwoofer is set to [On])The Equalizer Presets (Bass Max EQ) settings are disabled.Settings When Switching UsersThe functions/settings that are affected when switching users are as shown below.*1Except i-Personalize Setup*2The display pattern can be set when a camera equipped with a switch function on the Camera screen is connected.Items whose settings are affected when switching registered users, are indicated by “ ” in this manual.Example:How to Input Characters and Numbers (Keypad)Character input is required for user registration, place searches, etc.The displayed screens and procedures may vary slightly depending on the function used, but the basic input method is the same.Input screen area. (Delete)Returns to the previous character and erases it.Touching here for more than 2 seconds will erase all input characters.Character keypadSpecial character selector switchCharacter keypad Special character keypad Symbol keypad Character keypad (Space)Input number is confirmed.Car Specific Sound Setup (EASY SETUP)Item Ref. pageMy Favorites User Registration 20Setting My Favorites*121Displaying the Camera Image*223HD Radio/RBDS Displaying Radio Text 29General Setup Setting Top banner and Bottom banner Display40Switching the Display Color 41Sound Setup Turning Subwoofer ON/OFF 44Adjusting the Subwoofer Level 45Source setup Source Layout Setting 50Hands-Free Phone ControlAssigning as a Short Cut Dialing Number64Redial Function 63Phone Book Function 63Camera OperationSwitching the Image Pattern for the Rear Camera*270Switching the Image Pattern for the Front Camera*272Guide Display ON/OFF Setting 70, 73Adjusting the Caution Display Location 70, 7301GB00INE-W927HD.book Page 24 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-24.png)
![25-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESTop banner and Bottom banner Fade Out SettingWhen “Top/Bottom Banner Fade Out” is set to “ON,” the Top banner and Bottom banner on the Audio/Visual Playback screen fade out after 5 seconds if no operation is performed. To display the keys again, touch the middle of the screen.•For details of how to set Top/Bottom Banner Fade Out, refer to “Setting Top banner and Bottom banner Display” (page 40).Switching SourcesDuring audio/visual playback, press the (SOURCE) button or touch a source button in the top banner to switch to the desired source.Switching Sources Using the (SOURCE) ButtonDuring audio/visual playback, press the (SOURCE) button repeatedly to switch to the desired source.Radio Disc*1 USB/iPod*1 PANDORA®*1PANDORA®(BLUETOOTH)*2 SiriusXM*1 AUX-1*3 AUX-2*3 AUX-3*4 BLUETOOTH AUDIO*1 Radio…*1When no disc is inserted or no USB memory/iPod/SiriusXM Tuner/BLUETOOTH compatible devices is connected, this option is not available.*2When BLUETOOTH Pandora is set to “Off,” this option is not available.*3When AUX In is set to “Off,” this option is not available.*4When AUX3 In Sel. is set to “iPod Video,” this option is not available.Switching Sources Using the Top bannerTouch the source button for the Top banner at the top of the Audio/Visual Playback screen and select the desired source.If the source button is hidden, touch [<<] [>>].•When “Source Layout Setting” (page 50) is set to “On,” you can switch sources by tracing the middle of the screen from right to left or from left to right.This mode is useful if you feel the unit’s display is too bright at night.To cancel Screen OFF mode, touch the screen or press any button.•Screen OFF mode is not canceled by Volume UP/DOWN, Mute ON/OFF.•Screen OFF mode is canceled when the power or ACC is turned off.•When the gear lever is shifted to the reverse (R) position while the rear camera is connected, the rear camera image is displayed.•When a call is received while a BLUETOOTH device is connected, the incoming call screen is displayed.Switching the Dual Screen DisplayWhen you touch on the dual screen during video playback, the screen size selection message is displayed.Dual Wide (Initial setting)Dual FullTop bannerBottom banner Screen Off FunctionSource buttonTop banner01GB00INE-W927HD.book Page 25 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-25.png)
![26-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Full ScreenTouch OperationYou can operate the system by using the touch panel on the screen.•Be sure to touch the onscreen button lightly with the pad of your finger to protect the display.•If you touch a button and there is no reaction, remove your finger from the display once, and try again.•Onscreen buttons that cannot be operated appear dull in color.Common onscreen buttons[ ]:Returns to the previous screen. Depending on the function, this button may cancel the operations performed on the screen.[ ]: Closes the window.Selecting an Item in a ListTo scroll through a list, perform the following operations.Touch the screen and slide your finger up and down.The screen will scroll along with your finger movement.Also, you can touch [ ] and [ ].•After touching the screen, move your finger away from the screen before dragging and that item will be selected. About the Indicator DisplayThe Indicator Bar at the bottom of the screen displays various types of information, like the current time.The display will differ depending on the source. For details, refer to the display example of each source.Lights up when connected to a BLUETOOTH compatible device. : BLUETOOTH connection to audio device: BLUETOOTH connection to Hands Free Phone Blinks while reconnecting. Does not display when connection is set to OFF.Indicates the battery level of the connected BLUETOOTH device.This may not be displayed depending on the connected BLUETOOTH device.Indicates the signal strength level of the connected BLUETOOTH compatible device.Displayed when BLUETOOTH setting is ON.The clock displayYou can switch between the 12 hour display and 24 hour display options.For details of the clock display settings, refer to “Navigation System OM” in the CD-ROM.Battery Level No Battery Level 1 Level 2 Level 3Icon0 1 2 3 No Service01GB00INE-W927HD.book Page 26 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-26.png)
![27-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESINE-W927HD can receive HD radio signals based on digital radio broadcast standards in addition to analog radio broadcasts using RBDS. HD radio signals are broadcast in the service areas of the current AM/ FM broadcasters where they provide digital audio distribution and data services. This unit receives the above digital broadcasts for your high-quality sound enjoyment. Depending on the signal strength in TUNER mode, INE-W927HD will automatically switch between HD radio if digital signals can be received, and analog radio using RBDS if digital signals cannot be received. For details, please refer to “Switching between Digital and Analog,” “Forced Analog Mode.”•RBDS mode is only available during FM broadcast reception. This unit is able to receive signals based on the terrestrial digital radio broadcasting standard.When current AM/FM broadcasters are transmitting digital audio and data services, HD Radio signals are on-the-air in their service area. You can receive their digital broadcast and enjoy high quality sound. If there is no HD Radio signal in the current area, after 10 seconds, this unit will switch to receive the RBDS Radio signal automatically. However, the display is still HD Radio mode screen.Display example for Radio main screenBand displayDisplays the band of the signal currently being received.Frequency displayDisplays the frequency, song name and artist name of the signal currently being received.Preset buttonRegisters and recalls preset frequencies.SEEK modeDisplays the current SEEK mode.TAG IndicatorBlinks during tagging.Multicast IndicatorLights during multicast reception.HD Radio IndicatorDisplays during HD radio reception.Listening to the Radio1Press the (SOURCE) button.2Touch [Radio] of Top banner.The radio mode is activated and the display changes to the Radio mode screen.•The display content varies depending on the last band selected. ([RadioFM1], etc.)3Touch [Band] of Bottom banner to select the desired radio band.Each touch changes the bands as follows:4Touch [TUNE] to select the tuning mode.*1Displays only when the PTY tuning mode is selected. For details, refer “PTY (Program Type) Tuning (Analog Broadcasts only)” (page 28)•There are two modes you can select for auto tuning, DX and Local:-DX (Distance) mode*2;Both strong and weak stations will be tuned in.-Local mode*2;Only strong stations will be tuned in.The initial setting is DX.-D(Digital).DX SEEK mode;Automatically receives a receivable digital broadcast.-D(Digital).Local SEEK mode;Automatically receives a strong digital broadcast only.*2Depending on the signal status, a digital or analog broadcast is received.•During Forced Analog mode, digital broadcasts cannot be received.5Touch [ ],[ ] or [ ],[ ] to change the radio frequency up or down respectively.In manual mode, touch and hold to change the frequency continuously.Radio/HD Radio/RBDSTouch [<<], [>>]FM1 FM2 AM FM1DX SEEK Local SEEK D.DX SEEKD.Local SEEK MANUAL PTY*1 01GB00INE-W927HD.book Page 27 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-27.png)
![28-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Presetting Stations Manually1Tune in a desired radio station you wish to store in the preset memory by manual or automatic seek tuning.2Touch and hold any one of the preset buttons for at least 2 seconds.The selected station is stored.3Repeat the procedure to store up to 5 other stations onto the same band.To use this procedure for other bands, simply select the desired band and repeat the procedure.A total of 18 stations can be stored in the preset memory (6 stations for each band; FM1, FM2 or AM).•If a preset memory has already been set in the same preset number, it will be cleared and the new station will be memorized.Presetting Stations AutomaticallyThe tuner can automatically seek and store 6 strong stations in the selected band in order of signal strength.After selecting the desired band, touch [A.Memo] of Bottom banner.The tuner automatically seeks and stores 6 strong stations into the preset buttons in order of signal strength.When automatic storing has completed, the station stored in the preset 1 is selected.If [A.Memo] is not displayed, touch [<<] or [>>] in the bottom banner to display [A.Memo].•If no stations are stored, the tuner will return to the original station you were listening to before the automatic storing procedure began.•You can cancel this process by touching [A.Memo] while the tuner is automatically seeking stations. Canceling will return the tuner preset to the previous setting.Tuning to Preset StationsYou can tune in the preset stations in memory on either band using its preset number.1Touch [Band] of Bottom banner repeatedly until the desired band is displayed.2Touch any one of the preset buttons that has a station stored to it.The preset station is received.Forced Analog ModePress the Digital/Analog button to receive analog broadcasts only.Touch [Digital/Analog].•If digital broadcast is received, this operation switches reception to analog mode.•During Forced Analog mode, only analog broadcasts will be received even when digital broadcasts become available.Receiving a Multicast (HD Radio mode only)Multicasting is the ability to broadcast multiple program streams over a single FM frequency. This increases the amount and diversity of content choices. A maximum of 8 multicast station channels can be selected on this unit.•Indicator appears when signal reception is possible.•The station number of the current broadcast station appears on the screen.Selecting from the program list1Touch [Multicast List].A list of the types of programs currently being broadcast are displayed.2Select and touch the desired SPS broadcast track.Reception of signals from the selected SPS broadcast station starts, and is indicated on the screen.Changing the sub channels directlyTouch [ Multicast] or [Multicast ]The sub channel of the received radio station is changed.•If reception is lost during SPS broadcasting due to weak or no signal, the screen will display “HDx Signal loss.” If SPS broadcast reception is lost for over 100 seconds, reception will switch over to MPS broadcast (the reception mode will automatically return to SPS when SPS broadcasts become available again). PTY (Program Type) Tuning (Analog Broadcasts only)FM Radio mode1Touch [PTY Search] of Bottom banner.The Select PTY list screen is displayed.If [PTY Search] is not displayed, touch [<<] in the bottom banner to display [PTY Search].2Touch the selected program type to start searching for a station in the type.If no PTY station is found, “NO PTY.” will be displayed.3Touch [TUNE] to choose the PTY tuning mode. The PTY mode is activated.4To select the station in the PTY, touch [ ] or [ ].01GB00INE-W927HD.book Page 28 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-28.png)
![29-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESDisplaying Radio TextText messages from a radio station can be displayed.1Tune in a radio station that transmits text messages.2Touch [Info] in the bottom banner in FM radio mode repeatedly to switch to the desired display.HD-RadioRBDSStoring the Tag Information (HD Radio mode only)iTunes Tagging lets you tag songs heard on HD Radio stations. You can preview, buy and download later, songs from your iTunes tagged playlist the next time you sync your iPod/iPhone. If the unit is connected to a Tagging compatible iPod/iPhone, you can use the iTunes Tagging function. For details, refer to the Owner’s Manual of the Tagging compatible iPod/iPhone.When a desired song is heard on an HD Radio station, touch the [TAG]icon to save its tag information.If no iPod/iPhone is connected, “Tag Count X” is displayed (X is the total amount of the tag information stored in this unit).•During tagging, the iPod/iPhone takes priority to save the tag information. If no iPod/iPhone is connected, the tag information is saved to this unit.•When the memory of iPod/iPhone is full, “iPod Memory Full, Tag Count X” is displayed. The tag information will be stored to the unit.•If the tagging operation is interrupted by a hands-free phone call, the tagging operation will be canceled and the unit will display “Cannot Tag”.•This unit can store up to 50 pieces of tag information. When the memory of the unit is full, “Tuner Memory Full. Connect iPod” may be displayed.•When the iPod/iPhone is disconnected from the unit during tagging, its tag information will be stored in the unit.•If there is stored tag information on the unit, when an iPod/iPhone supporting the tag function is connected, the stored tag information will be transferred to the iPod/iPhone automatically. When the iPod/iPhone memory becomes full, “iPod Memory Full” will be displayed, and any remaining tag information on the unit will not be transferred to the iPod/iPhone.•If tag information already exists, “Already Tagged” will be displayed when you try to tag information again.About the Feature Logos• Digital, CD-quality sound. HD Radio Technology enables local radio stations to broadcast a clean digital signal. AM sounds like today’s FM and FM sounds like a CD.• Program Service Data: Contributes to the superior user experience of HD Radio Technology. Presents song name, artist, station IDs, HD2/HD3 Channel Guide, and other relevant data streams.• Adjacent to traditional main stations are extra local FM channels. These HD2/HD3 Channels provide new, original music as well as deep cuts into traditional genre.• iTunes® Tagging provides you the opportunity to discover a wide range of content and the means to “tag” that content for later review and purchase from the iTunes® Store.• Visual information related to content being played on your HD Radio receiver, such as Album Art, historical photographs, still art from live broadcasts, among other related content.Station Info Mode (Station Name/Frequency/Song Name)Song Info Mode (Station Name/Song Name/Artist Name/Album Name)Station Info Mode (PS/PTY/ Frequency/Song Name)Song Info Mode (PS/Song Name/Artist Name/Album Name)Radio Text Mode (Radio Text)When tagging is allowed, the TAG icon is displayed.01GB00INE-W927HD.book Page 29 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-29.png)
![30-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Display example for MP3/WMA/AAC main screenSong titleArtist titleAlbum titleCurrent song no./Total song no.Elapsed time•If there is no CD text, the message “NO TEXT” appears.Playback1Press the (SOURCE) button.2Touch [Disc] of Top banner.The display shows the Disc mode screen.When a disc is inserted into the disc slot of this unit, with the label side facing up, the unit starts playback of the disc.3Touch [ ] or [ ] to select the desired track (file).Returning to the beginning of the current track (file):Touch [ ].Fast reverse :Touch and hold [ ].Advancing to the beginning of the next track (file) :Touch [ ].Fast forward :Touch and hold [ ].4To pause playback, touch [ /].[ ] is displayed in the middle of the screen.Touch [ / ] again or touch [ ] in the middle of the screen to start playback.•The INE-W927HD can play back MP3/WMA/AAC files saved to CD or DVD. Use a format compliant with this unit.For further information about playing or storing MP3/WMA/AAC files, refer to pages 31 and 32 before using the unit.•Any file protected by DRM (Digital Rights Management) copy protection, cannot be played back on this unit.•If a disc contains both audio data and MP3/WMA/AAC data, this unit plays back only the audio data.•The track display for CD audio data playback shows the track numbers recorded on the disc.•If an MP3/WMA/AAC disc with many files and folders is played, it may take longer than normal to start playback.•The playback time may not be correctly displayed when a VBR (Variable Bit Rate) recorded file is played back.Repeat PlayTouch [ ] to repeatedly play back.The tracks (files) will be played repeatedly.The repeat mode switches every time the button is touched.* Only files in a folder are repeatedly played back.•If the Repeat Play mode is activated during M.I.X. playback, the M.I.X. mode will be canceled.M.I.X. (Random Play)Touch [ ] of Bottom banner during playback.The tracks (files) on the disc will be played back in a random sequence.The M.I.X. mode switches every time [ ] is touched.* Only files in a folder are played back in random sequence.•If the M.I.X. mode is activated during Repeat playback, the Repeat Play mode will be canceled.•If you select a track by using the search mode, the M.I.X. play mode will be canceled.CD/MP3/WMA/AACCD:Repeat (OFF) RepeatMP3/WMA/AAC:Repeat Repeat Folder*(OFF) RepeatCD:M.I.X. (OFF) M.I.X.MP3/WMA/AAC:M.I.X. Folder*(OFF) M.I.X. Folder*01GB00INE-W927HD.book Page 30 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-30.png)
![31-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESSelecting Folders (Concerning MP3/WMA/AAC)Touch [ ] or [ ] of Bottom banner to select the folder.Searching from CD Text1Touch [ (Search)] of Bottom banner during playback.The CD text search screen is displayed.2Touch the selected track name.The selected track will be played back.•For details on how to scroll through the list, refer to “Selecting an Item in a List” (page 26).File/Folder Name Search (Concerning MP3/WMA/AAC)1Touch [ (Search)] of Bottom banner during playback.The search mode is activated.2Touch [MUSIC].The folder name list screen is displayed.Folder Name Search mode3Touch [ ] in the desired folder.The first file in the selected folder is played back.File Name Search mode3Touch the desired folder name.The File name of the selected folder is displayed.4Touch the desired file name.The selected file is played back.•To return to the previous hierarchy, touch [ ].•For details on how to scroll through the list, refer to “Selecting an Item in a List” (page 26).•After selecting a folder via a Folder name search, touch [ ] on the main screen to display the folder search screen.•After selecting a file via a File name search, touch [ ] on the main screen to display the file search screen.About MP3/WMA/AACWhat is MP3?MP3, whose official name is “MPEG Audio Layer 3,” is a compression standard prescribed by the ISO, the International Standardization Organization and MPEG which is a joint activity institution of the IEC.MP3 files contain compressed audio data. MP3 encoding is capable of compressing audio data at extremely high ratios, reducing the size of music files to as much as one-tenth their original size. This is achieved while still maintaining near CD quality. The MP3 format realizes such high compression ratios by eliminating the sounds that are either inaudible to the human ear or masked by other sounds.What is AAC?AAC is the abbreviation for “Advanced Audio Coding,” and is a basic format of audio compression used by MPEG2 or MPEG4.What is WMA?WMA, or “Windows Media™ Audio,” is compressed audio data.WMA is similar to MP3 audio data.Method for creating MP3/WMA/AAC filesAudio data is compressed using software with MP3/WMA/AAC codecs. For details on creating MP3/WMA/AAC files, refer to the user’s manual for that software.MP3/WMA/AAC files that are playable on this device have the file extensions.MP3: “mp3”WMA: “wma” (ver. 7.x, 8.x, 9.x are supported)AAC: “m4a”WMA is not supported for the following files, Windows Media Audio Professional, Windows Media Audio 9 Voice or Windows Media Audio 9 Pro Lossless.There are many different versions of the AAC format. Confirm that the software being used conforms to the acceptable formats listed above. It’s possible that the format may be unplayable even though the extension is valid. Playback of AAC files encoded by iTunes is supported.CAUTIONExcept for private use, duplicating audio data (including MP3/WMA/AAC data) or distributing, transferring, or copying it, whether for free or for a fee, without permission of the copyright holder is strictly prohibited by the Copyright Act and by international treaty.01GB00INE-W927HD.book Page 31 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-31.png)
![33-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESDisplay example for DVD Video main screenDisplay example for DivX® main screenInformation display-1DVD-Video:Title name/Chapter No.DivX®:Title name/File No./Current File No./Total File No. in Current FolderInformation display-2DVD-Video:Audio signal output/Subtitle/AngleDivX®:Audio signal output/SubtitleRemaining time for playingElapsed timeDisc types that can be used for each heading are represented by the following marks.The DVD operation screen displayTouch the screen while the DVD playback screen is displayed.The DVD operation screen is displayed.•The operation screen changes to the visual screen in the DVD mode for 5 seconds after an operation has been performed.•If you try to activate the DVD while driving, the display will show the warning-Picture off for your safety.•Some operations cannot be carried out depending on the disc or playback screen.DVDTouch [<<], [>>]Touch [<<], [>>]DVD Commercial Video discs (used for the distribution of movies, etc.) or a DVD-R/DVD-RW, DVD+R/DVD+RW recorded in a video mode can be used.CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW discs that are recorded in the DivX® mode can be used.01GB00INE-W927HD.book Page 33 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-33.png)
![34-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Playing a Disc 1Press the (SOURCE) button.2Touch [Disc] of Top banner.The display shows the Disc mode screen.Or insert a disc with the label side facing up. The unit starts to play the disc.•The reverse side of a double-sided DVD will not be played automatically. Remove the disc, turn it over, and reinsert it.•DO NOT insert discs containing maps for the navigation system. Doing so could result in damage.•Refer also to “Disc Setting” (page 50).•While reading a DivX® file, the fast-forwarding/fast-reversing and repeat functions, etc. cannot be used.•A DivX® file that exceeds 4GB cannot be played back.On DVD mode, menu screens may appear automatically. If this happens, perform the operation described below to start playback.Direct Menu Operations Touch the DVD menu directly.Menu Operations 1Touch [Key].The menu operation mode will be displayed.Touch [ ] [ ] to change the Key panel location from right to left or vice-versa. Touch [Return] to return to the previous display.2Select a desired menu item by touching [ ],[ ],[ ] or [ ].•Touching [ ] in the operation panel returns to the screen in step 1.•Touching [Key] displays the Numeric Keypad Input Mode screen.For details of the Numeric Keypad Input Mode screen, refer to “Numeric Keypad Input Operations” (page 35).3Touch [Enter] to confirm the selected item.WARNINGIt is dangerous for the driver to watch the DVD/TV/Video while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur.Install the INE-W927HD correctly so that the driver cannot watch DVD/TV/Video unless the vehicle is stopped and the emergency brake is applied.If the INE-W927HD is not installed correctly, the driver will be able to watch the DVD/TV/Video while driving the vehicle and may be distracted from looking ahead causing an accident. The driver or other people could be severely injured.Caution• Not all functions will operate for every DVD. See the individual DVD’s instructions for details on the features supported.• Fingerprints on a disc may adversely affect playback. If a problem occurs, remove the disc and check for fingerprints on the playback side. Clean the disc if necessary.• If you switch the power or Ignition key OFF or change sources during playback, playback will continue where you left off when you resume playback. • If you try to perform an invalid operation (based on the type of disc being played), the following mark is displayed on the monitor screen: • Play Position Memory Function Even if you turn power off or switch the Ignition key to OFF during playback or change the source, playback will continue from the point where playback stopped when the power is turned ON again. If a Menu Screen Appears•Some operations cannot be performed depending on the disc.01GB00INE-W927HD.book Page 34 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-34.png)
![35-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRES1Touch [10KEY] of Bottom banner.The numeric keypad input mode screen appearsIf [10KEY] is not displayed, touch [<<] in the bottom banner to display [10KEY].2Touch a desired number.Touch [ ] to delete an entered number.Touch [Delete All] to delete all entered number.3Touch [Enter] on the numeric keypad mode screen to confirm your selection.Touch [ ] to hide the keypad display.When a DVD contains two or more titles, the top menu screen appears.Touch [TOP MENU] of Bottom banner.The top menu screen appears.•To perform necessary operations, refer to “If a Menu Screen Appears” (page 34).With a DVD having two or more menus, a menu screen will appear for the programs available, in addition to the main programs.Touch [MENU] of Bottom banner.The Root menu screen appears.•To perform necessary operations, refer to “If a Menu Screen Appears” (page 34).Stopping Playback (PRE STOP) Touch the stop button during playback to stop playback. That position is stored in the memory.1Touch [ ] during playback.“Pre ” indicator and [ ] in the middle of the screen are displayed.2Touch [ /ll] in the PRE STOP mode or touch [ ] in the middle of the screen.Playback starts from the position at which it was stopped.•For some discs, the position at which playback was stopped may not be accurate.Stopping Playback Touch and hold [ ] for at least 2 seconds during playback.“ ” indicator and [ ] in the middle of the screen are displayed.•Playback starts from the beginning when [ /ll] or [ ] in the middle of the screen is touched while playback is stopped.Fast-forwarding/Fast-reversing 1During playback, touch and hold [ ] (Fast-reverse) or touch and hold [ ] (Fast-forward).DVD-Video:Touch and hold for more than 1 second to forward/reverse at double speed.Every time you touch [ ]/[ ] during fast- reverse/fast- forward, the speed changes as follows: 2x 8x 32x 2x.DivX®:Touch and hold for more than 1 second to forward/reverse at 8x speed.Every time you touch [ ]/[ ] during fast- reverse/fast- forward, the speed changes as follows: 8x 16x 32x 8x.•For a DivX® file that does not contain index information, the fast forward and the reverse option is not available.2Touch [ / ] to return to normal playback.•No sound is played back during fast-forwarding/fast-reversing.•On DVD mode, the menu screen may reappear during fast-forwarding/fast-reversing.•This operation may not be possible on certain discs.Finding the Beginnings of Chapters/Tracks/Files During playback, touch [ ] or [ ].The chapter/track/file switches each time the button is touched, and playback of the selected chapter/track/file starts.•Some DVDs do not have chapters.Numeric Keypad Input Operations Displaying the Top Menu Screen Displaying the Menu Screen :Touch this to start playback from the beginning of the following chapter, track or file.:Touch this to start playback from the beginning of the current chapter, track or file.Supplementary explanations“Chapters” are divisions of movies or musical selections on DVDs.01GB00INE-W927HD.book Page 35 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-35.png)
![36-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Playing Still Frames (Pausing) 1During playback, Touch [ / ] of Bottom banner.2Touch [ / ] or [ ] in the middle of the screen to resume playback.•No sound is played during the still frame mode.•The image or sound may stop temporarily when playback starts from the pause mode. This is not a malfunction.Forward frame-by-frame Playback 1In the pause mode, touch [ ].The picture advances by one frame each time the button is touched.2Touch [ / ] or [ ] in the middle of the screen to return to normal mode.•No sound is output during forward frame-by-frame playback.•You cannot execute reverse frame-by-frame playback.Slow Motion Playback 1When [ ] is touched and held while in the pause mode, the 1/8th speed slow motion playback mode is set.Furthermore, when touched and held [ ] again, the slow motion speed switches to 1/2 the normal speed.2Touch [ / ] of Bottom banner to play back.•No sound is played during slow motion playback.•1/2, 1/8 are approximate speeds. The actual speed differs from disc to disc.•You cannot execute reverse slow motion playback.Selecting Folders Touch [ ] or [ ] of Bottom banner to select the folder.•Touch [ ] to play from the first file of the previous folder. Touch [ ] to play from the first file of the next folder.Repeat Playback Use this function to play the disc’s titles, chapters or tracks, etc., repeatedly.Touch [ ] of Bottom banner.The repeat mode switches every time the button is touched.DVD Video•The REPEAT mode is always turned off when [ ] is touched and held for at least 2 seconds.DivXSearching by Title Number Use this function to easily find positions on the DVD using the DVD’s titles. Perform operations while playback is stopped.1Touch [10Key] of Bottom banner.The numeric keypad input mode screen appears.If [10Key] is not displayed, touch [<<] in the bottom banner to display [10Key].•For DVD Video, the numeric keypad can also be displayed by touching the Menu screen and then touching [Key] twice.2Enter a desired title by touching its number.See page 35 for operation of the numeric keypad.3Touch [Enter].Playback will start from the number selected.4Touch [ ].•This function cannot be used on discs on which no title numbers are recorded.•Some disc may not accept any operation.The chapter is played repeatedly.The title is played repeatedly.Playback returns to normal mode. (Chapter) (Title) (OFF)®The file is played repeatedly.The disc is played repeatedly. (File) (Folder) The folder is played repeatedly. (Repeat All)01GB00INE-W927HD.book Page 36 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-36.png)
![37-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESSearching Directly by Chapter Number Use this function to easily move to the beginnings of the chapters on the disc. Perform operations during playback, during PRE-STOP or while playback is paused.1Touch [10Key] of Bottom banner.The numeric keypad input mode screen will appear.If [10Key] is not displayed, touch [<<] in the bottom banner to display [10Key].2Touch and enter the chapter number you want to play.See page 35 for operation of the numeric keypad.3Touch [Enter] to confirm your selection.Playback will start from the selected chapter.4Touch [ ].•This function is not available for a disc on which chapters are not stored.Searching for a Desired Video File You can select a video file from the list screen.1Touch [ (Search)] of Bottom banner.The search mode is activated.2Touch [Video].The folder list screen appears.Folder Name Search mode3Touch [ ] in the desired folder.The first file in the selected folder is played back.File Name Search mode3Touch the desired folder name.The File name of the selected folder is displayed.4Touch the desired file name.The selected file is played back.•To return to the previous hierarchy, touch [ ].•For details on how to scroll through the list, refer to “Selecting an Item in a List” (page 26).•After selecting a folder via a Folder name search, touch [ ] on the main screen to display the folder search screen.•After selecting a file via a File name search, touch [ ] on the main screen to display the file search screen.Switching the Angle On DVDs in which scenes have been filmed from multiple angles, the angle can be switched during playback.Touch [ANGLE] of Bottom banner.The angle switches between the angles recorded on the disc every time the button is touched.If [ANGLE] is not displayed, touch [<<] or [>>] in the bottom banner to display [ANGLE].•Some time may be required for the angle to change.•Depending on the disc, the angle may switch in one of two ways.-Seamless: The angle switches smoothly.-Non-seamless: When the angle is switched, a still picture is displayed first, after which the angle switches.Switching the Audio Tracks DVDs with multiplex audio or audio languages allow switching the sound during playback.Touch [AUDIO] of Bottom banner.The sound switches between the alternate audio tracks recorded on the disc every time the button is touched.If [AUDIO] is not displayed, touch [<<] or [>>] in the bottom banner to display [AUDIO].•The alternate track selected becomes the default setting every time the power is turned on or the disc is replaced. If the disc does not include that track, the disc’s default language is selected instead.•Not all discs will allow changing the alternate audio tracks during playback. In these cases, select audio tracks from the DVDs menu.•There may be a delay before the selected alternate track begins to play.Switching the Subtitles (Subtitle Language) With DVDs on which multiple subtitle languages are recorded, the subtitle language can be switched during playback; moreover, subtitles can be hidden.Touch [Sub Title] of Bottom banner.Touching this button repeatedly selects sequentially the subtitle languages recorded on the disc, and then turns the subtitles OFF.If [Sub Title] is not displayed, touch [<<] or [>>] in the bottom banner to display [Sub Title].•There may be a delay before the selected subtitle appears.•Not all discs will allow changing the subtitles during playback. In these cases, select subtitles from the DVDs menu.•The subtitle language selected becomes the default setting every time the power is turned on or the disc is replaced. If the disc does not include that language, the disc’s default language is selected instead.However, the subtitle language may differ depending on the disc.•For some discs, the subtitles will be displayed even when this is set to OFF. However, the subtitle language may differ depending on the disc.01GB00INE-W927HD.book Page 37 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-37.png)
![39-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESTouch the [SETUP] icon on the Audio/Visual Playback screen to display the Setup main screen.General Setup Operation1Touch [Setup] icon of Top banner.The Setup main screen is displayed.2Touch [General].The General Setup screen appears.3Select the desired item.Setting items: Language / Remote Sensor / Top/Bottom Banner Fade Out / Screen/LED Customize / Visual / About / Installation•Depending on the item, repeat step 3.4Touch [ ] or [ ] etc., to change its setting.•When the pop-up window for setup is displayed, touch [ ] to close the window after setting.5Touch [ ] to return to the previous screen.•Immediately after changing the settings of General Setup (While the system is writing data automatically) do not turn the ignition key to OFF. Otherwise, the settings may not be changed.Language Setting[Language] is selected on the General setup menu in step 3. Refer to “General Setup Operation” (page 39).Scroll display is available if CD text, folder name, file name or tag information is entered.Setting item: Auto ScrollSetting contents: Off (Initial setting) / OnSetupSetup OperationGeneral SetupTo display the General Setup Menu screen:Your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedures below.1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake.2 Keep pushing the foot brake and release the parking brake once then engage it again.3 When the parking brake is engaged for the second time, release the foot brake.•For automatic transmission vehicles, place the transmission lever in the Park position.Now, the locking system for the General mode operation has been released. Engaging the parking brake can reactivate the General Setup Menu, as long as the car’s ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of “To display the General mode screen.”Each time the ignition is turned OFF, perform the procedure of “To display the General mode screen.”The following steps 1 to 5 are common operations to each “Setting item” of General Setup. Refer to each section for details.[SETUP] iconSetting the ScrollOff: Turns off the scroll mode.On: Turns on the Auto scroll mode. Scroll display is repeated as long as the mode is turned on.01GB00INE-W927HD.book Page 39 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-39.png)
![40-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)The character code to be used for tag text information displayed on the screen can be selected from 7 character codes. Setting item: Format Sel.Setting contents: EU1 / EU2 (Initial setting) / RUS / CHI / THA / ARAThe Setup menu, feedback information, etc. for this unit can be changed to appear in the selected language.Setting item: Language Sel.Setting contents: English / German / French / Spanish / Portuguese / Italian / Dutch / Finnish / Norwegian / Swedish / Russian / Thai / Arabic / Chinese / Other languages (Czech / Danish / Greek / Hungarian / Polish / Slovak / Turkish)•Touch [OK] to confirm the language and display the screen in the specified language.Remote Sensor Setting[Remote Sensor] is selected on the General setup menu in step 3. Refer to “General Setup Operation” (page 39).For remote control operation, the remote sensor of the external device (monitor, etc.) can be switched, as you prefer.Setting item: Remote SensorSetting contents: Front (Initial setting) / Rear•If the RSE (page 54) is “Off,” the setting is not displayed.Setting Top banner and Bottom banner Display[Top/Bottom Banner Fade Out] is selected on the General setup menu in step 3. Refer to “General Setup Operation” (page 39).You can configure the display setting for the Top banner and Bottom banner for the audio/visual source.Setting item: Top/Bottom Banner Fade OutSetting contents: Off (Initial setting) / OnScreen/LED CustomizeTouch [Screen/LED Customize] on the General setup menu in step 3. Refer to “General Setup Operation” (page 39).Backlighting is provided by a fluorescent light built into the liquid crystal panel. The illumination control adjusts the brightness of the backlighting based on the car ambient lighting for easier viewing.Setting item: DimmerSetting contents: Auto (Initial setting) / On / Off•When “Auto” or “On” is set, the setting is also applied for the button lighting in “Adjusting the Dimmer of Button Lighting at Night” (page 41), and “Adjusting the Minimum Level of Backlight” (page 40).You can adjust the brightness of the backlight. This function could be used, for instance, to change the screen brightness while traveling at night.Setting item: Screen Dimmer LevelSetting content: -15 to +15 (Initial setting: 0)You can adjust the level between MIN (-15) and MAX (+15). When it reaches the minimum or maximum point, the display shows “MIN” or “MAX” respectively.Format SettingsEU1: ISO 8859-1EU2: ISO 8859-15RUS: ISO 8859-5CHI: GB18030THA: CP874ARA: CP1256Setting the Menu LanguageFront: The remote sensor of this unit is effective.Rear: The remote sensor of the external monitor connected to AUX OUTPUT of this unit becomes effective. The remote control operates the source connected to the AUX OUTPUT terminals.Off: Always displayedOn: Fade out after 5 seconds if no operations performedSetting the Brightness of the BacklightingAuto: Adjust the brightness of the background illumination of the monitor automatically to the brightness of the car interior.On: Keep the background illumination of the monitor dark.Off: Deactivate Auto Dimmer mode to keep the background illumination of the monitor bright.Adjusting the Minimum Level of Backlight01GB00INE-W927HD.book Page 40 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-40.png)
![41-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESYou can adjust the brightness of the button lighting at night with the dimmer.Setting item: Key Illumination LevelSetting level: -2 to +2 (Initial setting: 0)You can choose from 5 different display colors.Setting item: Screen ColourSetting contents: Blue (Initial setting) / Red / Green / Amber / BlackAdjustment becomes necessary when the display position on the LCD and the touch position on the touch panel do not match.Setting item: Screen Alignment1Touch [Screen Alignment] in the Screen/LED Customize screen.The adjustment screen appears.2Accurately touch the mark provided in the upper left corner of the screen.3Accurately touch the mark provided in the lower right corner of the screen.This completes adjustment, and returns to the previous screen.•If you touch [Cancel] on the adjustment screen, no adjustment is done and returns to the previous screen.Initialize the corrected values adjusted by Adjusting the Touch Panel.1Touch [Screen Alignment Reset] in the Screen/LED Customize screen.2After the confirmation message appears, touch [OK].The corrected values are initialized.Visual Setting[Visual] is selected on the General setup menu in step 3. Refer to “General Setup Operation” (page 39).1Touch the desired item.•“Video” can be selected while a video is playing. 2Touch the desired item.Settable items differ depending on the application. [Video] (Video media):Display Mode*1 / Live Contrast / Visual EQ / Bright / Colour / Tint / Contrast / Sharp[Direct Camera]*2:Live Contrast / Bright / Colour / Contrast[AUX Camera]*2:Live Contrast / Bright / Colour / Contrast[Navigation]:Bright / Contrast*1When media is set to AUX, the settings cannot be changed in the situations below.•When “AUX In” is set to “DVB-T” is “On.”*2The camera names set under the “Direct Camera/AUX Camera” settings are displayed. The camera names are not displayed when “Off” is set (pages 58, 59). 3Touch [ ] or [ ] to change its setting. 4Touch [ ] to return to the previous screen.•Immediately after changing the settings of Display Setup (While the system is writing data automatically) do not turn the ignition key to OFF. Otherwise, the settings may not be changed.Adjusting the Dimmer of Button Lighting at NightSwitching the Display ColorAdjusting the Touch PanelInitializing the Touch Panel Corrected Values01GB00INE-W927HD.book Page 41 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-41.png)
![43-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESSetting item: ContrastSetting content: -15 to +15 (Initial setting: 0)You can adjust the contrast between LOW (-15) and HIGH (+15). When it reaches the minimum or maximum point, the display shows “LOW” or “HIGH” respectively.Setting item: SharpSetting content: -5 to +5 (Initial setting: 0)Picture quality adjustment range is -5 to +5. “SOFT” and “HARD” appear as the minimum and maximum values specified.When adjusting audio (video media), you can store the settings made for “Adjusting Live Contrast, Brightness, Color, Tint, Contrast and Sharp.”Setting item: Preset1 / Preset21 After completing “Adjusting Live Contrast, Brightness, Color, Tint, Contrast and Sharp” (pages 42, 43), touch and hold [Preset1] or [Preset2] to save the settings. 2 Touch [Preset1] or [Preset2] to call the saved settings. •Display Mode cannot be registered.About INE-W927HD[About] is selected on the General setup menu in step 3. Refer to “General Setup Operation” (page 39).You can view the version information of this product. Make note of this information and refer to it whenever you contact Alpine Tech Support or an Alpine-authorized dealer.Setting item: Version InfoContents: Serial No. / Firmware VersionThis unit will display the registration code required to play a DivX®VOD (Video On Demand), or you can also display the deregistration code.Setting item: Warranty/Copyright Info.Displaying the Registration Code1Touch [Warranty/Copyright Info.].2Touch [DivX(R) VOD].3Touch [Registration].The registration code is displayed on the screen.4Touch [OK].Displaying the Deregistration Code1Touch [Warranty/Copyright Info.].2Touch [DivX(R) VOD].3Touch [Deregistration].The confirmation dialog screen appears.4Touch [OK].The deregistration code is displayed on the screen.•When you have finished, touch [Cancel]. If you want to continue and display a new registration code, touch [OK], check the registration code, and then touch [OK] again.You can initialize all data, to restore the factory settings. Remove the CD/DVD disc, etc. from the system before operationSetting item: Restore Factory Setting1Touch [Restore Factory Setting].2After the confirmation message appears, touch [OK].The confirmation screen appears again.3Touch [OK].The system starts initialization.•Do not turn on/off the power or change the ignition key position until system restart is completed.•Do not detach the front panel by pressing the (Release) button until system restart is complete.Installation Setup[Installation] is selected on the General setup menu in step 3. See “General Setup Operation” (page 39).Setting item: InstallationThe Installation check screen is displayed.Adjusting Image ContrastAdjusting Picture QualitySaving and Calling the Adjusted Picture QualityDisplaying the Product InformationChecking the DivX® RegistrationInitializing the System01GB00INE-W927HD.book Page 43 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-43.png)
![44-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Sound Setup Operation1Touch [Setup] icon of Top banner.The Setup main screen is displayed.2Touch [Sound].The Sound Setup screen appears.3Select the desired item.Setting items: Balance / Fader / Subwoofer / Media Xpander / Bass Max EQ / Parametric EQ / Time Correction / X-OVER / Defeat / Volume / Source Volume Setup4Touch [ ] or [ ] etc., to change its setting.•When the pop-up window for setup is displayed, touch [ ] to close the window after setting.5Touch [ ] to return to the previous screen.•Immediately after changing the Sound Setup (while the system is writing data automatically) do not turn the ignition key to OFF. Otherwise, the settings may not be changed.•For details on how to scroll through the list, refer to “Selecting an Item in a List” (page 26).Setting the Balance/Fader/Subwoofer[Balance/Fader/Subwoofer] is selected on the Sound setup menu in step 3. Refer to “Sound Setup Operation” (page 44).Touch the desired point within the image area. Or touch [ ] [ ] [ ] [ ].Balance: L15 to R15Fader: F15 to R15You can set the rear speaker output to “Off.”Setting item: Rear SpeakerSetting contents: On (Initial setting) / Off•Note that if you select “Off” when the Rear Speaker Position in Car Specific Sound Setup is set to “Rear Deck” or “Rear Door/Panel,” the setting in Car Specific Sound Setup will be canceled.If an optional subwoofer is connected to the unit, make the following setting.Setting item: SubW.Setting contents: On / Off (Initial setting: Off)•Note that if you select “Off” when Subwoofer Installed in Car Specific Sound Setup is set to “Yes,” the setting in Car Specific Sound Setup will be canceled.Sound SetupTo display the Sound Setup Menu screen:Your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedures below.1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake.2 Keep pushing the foot brake and release the parking brake once then engage it again.3 When the parking brake is engaged for the second time, release the foot brake.•For automatic transmission vehicles, place the transmission lever in the Park position.Now, the locking system for the Sound mode operation has been released. Engaging the parking brake can reactivate the Sound Setup Menu, as long as the car’s ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of “To display the Sound mode screen.”Each time the ignition is turned OFF, perform the procedure of “To display the Sound mode screen.”The following steps 1 to 5 are common operations to each “Setting item” of Sound Setup. Refer to each section for details. Adjusting the Balance/FaderRear Speaker SettingTurning Subwoofer ON/OFFImage area01GB00INE-W927HD.book Page 44 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-44.png)
![45-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESYou can set the Subwoofer level when a Subwoofer is connected.Setting item: SubW. LEVELSetting contents: 0 to 15 (Initial setting: 0)•If the Subwoofer setting is “Off,” the setting cannot be set.The subwoofer output phase is toggled Subwoofer Normal (0°) or Subwoofer Reverse (180°).Setting item: SubW. PhaseSetting contents: 0° / 180° (Initial setting: 0°)•If the Subwoofer setting is “Off,” the setting cannot be set.Setting the MX (Media Xpander)[Media Xpander] is selected on the Sound setup menu in step 3. Refer to “Sound Setup Operation” (page 44). When the currently playing source is AM radio band, this option is not available.MX (Media Xpander) makes vocals or instruments sound distinct regardless of the music source. The CD, USB memory and iPod/iPhone, will be able to reproduce the music clearly even in cars with a lot of road noise.Setting item: Media Xpander1Touch [ON] of “ALL MX OFF/ON” in the MX setup screen.2Touch any of [ ] [ ] [ ] [ ].•The MX setting can be performed only when a source is currently selected.•MP3/WMA/AAC/iPod/USB Audio/DivX®/BLUETOOTH Pandora/BLUETOOTH Audio correspond to MX Compress Media.MX SiriusXMThe medium to high frequencies become more clear, and produces well balanced sound in all the bands.MX DVD (Movie)The dialog portion of the video is reproduced more clearly.(DVD Music)This disc contains a large quantity of data such as music clip. MX uses this data to reproduce the sound accurately.MX CDCD mode processes a large quantity of data. This data is used to reproduce the sound cleanly by making use of the data quantity.MX Compress MediaThis corrects information that was omitted at the time of compression. This reproduces a well-balanced sound close to the original. MX PandoraThis corrects information that was omitted at the time of compression. This reproduces a well-balanced sound close to the original.MX AUX/AUX3Choose the MX mode (Compress Media, Movie, or Music) that corresponds to the media connected.MX HD RadioThe medium to high frequencies become more clear, and produces well balanced sound in all the bands.•To cancel MX mode for all music sources, set MX to “Off” in step 1.•Each music sources, such as FM radio, CD, and MP3/WMA/AAC can have its own MX setting.•Setting to MX sets MX mode of each music sources to “Off.”•The function is inoperable when Defeat is set to “On.”Equalizer Presets (Bass Max EQ)[Bass Max EQ] is selected on the Sound setup menu in step 3. Refer to “Sound Setup Operation” (page 44).10 typical equalizer settings are preset at the factory for a variety of musical source material.Setting item: Bass Max EQSetting contents: FLAT (Initial setting) / POPS / ROCK / NEWS / JAZZ / ELECTRICAL DANCE / HIP HOP / EASY LISTENING / COUNTRY / CLASSICAL•Only one type can be set to ON.•When Bass Max EQ setting is edited, a Download Sound setting is disabled.•When Bass Max EQ is set, the interlinked Parametric EQ settings are also changed. We recommend storing Parametric EQ settings in the Preset in advance.•The Bass Max EQ setting can be configured when Defeat is “Off.”Adjusting the Subwoofer LevelSetting the Subwoofer PhaseMedia LevelOFF 1 2 3SiriusXMDVDCDCompress MediaPandoraAUX/AUX3HD Radio01GB00INE-W927HD.book Page 45 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-45.png)
![46-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Adjusting the Parametric Equalizer Curve (Parametric EQ)[Parametric EQ] is selected on the Sound setup menu in step 3. Refer to “Sound Setup Operation” (page 44).You can modify the Equalizer settings to create a response curve moreappealing to your personal taste.Setting item: Parametric EQ1Adjust the Parametric EQ to your preference.Adjusting the BandTouch [Band] to select the band to be adjusted.•You can select a band directly by touching the screen. Adjusting the FrequencyTouch [ ] or [ ] of “Freq.” to adjust the frequency of the selected band.Adjustable frequency Bands: 20 Hz to 20 kHz (in 1/3 octave steps)Adjusting the LevelTouch [ ] or [ ] of “Level” to adjust the level of selected band.Setting contents: -7 to +7 (Initial setting: 0)Setting the BandwidthTouch [ ] or [ ] of “Q Adjust” to select the bandwidth. Setting contents: 1 (Initial setting) / 2 / 32To adjust another band, repeat step 1, and adjust all bands.3To store the adjusted setting value, touch and hold [Preset1],[Preset2], or [Preset3] for at least 2 seconds.•Settings exceeding the frequency of adjacent bands are not available.•While adjusting the Parametric EQ, you should consider the frequency response of the connected speakers.•When the parametric EQ is adjusted, the adjustment for Bass Max EQ becomes ineffective.•When Bass Max EQ is set, the interlinked Parametric EQ settings are also changed. We recommend storing Parametric EQ settings in the Preset in advance.•Touch [Flat] to initialize all values.•The Parametric EQ setting can be configured when Defeat is “Off.”Calling the Parametric EQ adjusted valueCalling the pre-set Parametric EQ adjusted value.Touch [Preset1],[Preset2], or [Preset3] on the Parametric EQ screen.The setting stored in the Preset will be recalled.Adjusting the Time Correction (Time Correction)[Time Correction] is selected on the Sound setup menu in step 3. Refer to “Sound Setup Operation” (page 44).Before performing the following procedures, refer to “About Time Correction” (page 48).Setting item: Time Correction1Touch [ms] or [cm] to select mode for making adjustments. Each time you touch, the onscreen button and correction mode changes.ms: Adjust time.cm: Adjust listening position and distance from each speaker. 2Touch [ ] or [ ] for each speaker to adjust the time or distance. 0.0msec to 9.9msec (0.1msec/step)0.0cm to 336.6cm (3.4cm/step)All speaker setting values are adjustable in the range of 20ms or 680cm.Band1 Band2···Band8 Band9Band1: 20 Hz~100 Hz (63 Hz)Band2: 63 Hz~315 Hz (125 Hz)Band3: 125 Hz~500Hz (250 Hz)Band4: 250 Hz~1 kHz (500Hz)Band5: 500 Hz~2 kHz (1 kHz) Band6: 1 kHz~4 kHz (2 kHz)Band7: 2 kHz~7.2 kHz (4 kHz)Band8: 5.8 kHz~12 kHz (8 kHz)Band9: 9 kHz~20 kHz (16 kHz)Correction mode01GB00INE-W927HD.book Page 46 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-46.png)
![47-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRES3To store the adjusted setting value, touch and hold [Preset1],[Preset2], or [Preset3] for at least 2 seconds.•Touch [Flat] to set all values to 0.0.•If the Rear Speaker setting is “Off,” the Rear Speaker setting cannot be edited (Refer to page 44).•If the Subwoofer setting is “Off,” the Subwoofer setting cannot be edited (Refer to page 44).Calling the Time Correction ValueCalling the pre-set time correction value.Touch [Preset1],[Preset2], or [Preset3] on the time correction screen.The setting stored in the Preset will be recalled.Adjusting the Crossover Settings (X-OVER)[X-OVER] is selected on the Sound setup menu in step 3. Refer to “Sound Setup Operation” (page 44).Before performing the following procedures, refer to “About the Crossover” (page 49).Setting item: X-OVER1Touch [Channel] to select the channel.Each time you touch, the channel switches.•The channel being adjusted is displayed in red.2Adjust the crossover to your preference.Selecting the Cut-Off Frequency Touch [ ] or [ ] of “Freq.,” then select the cut-off frequency.Setting contents: 20 / 25 / 31.5 / 40 / 50 / 63 / 80 (Initial setting) / 100 / 125 / 160 / 200 HzAdjusting the SlopeTouch [ ] or [ ] of “Slope,” then adjust the HPF or LPF slope.Setting contents: 0 (Initial setting) / 6 / 12 / 18 / 24 dB/octAdjusting the LevelTouch [ ] or [ ] of “Level,” then adjust the HPF or LPF level.Setting contents: -12 to 0 dB (Initial setting: 0)3Repeat steps 1 to 2 to make adjustment to the other channels.4To store the adjusted setting value, touch and hold [Preset1],[Preset2], or [Preset3] for at least 2 seconds.•Touch [Flat] to initialize all values.•If the Rear Speaker setting is “Off,” the Rear Speaker setting cannot be edited (Refer to page 44).•If the Subwoofer setting is “Off,” the Subwoofer setting cannot be edited (Refer to page 44).•While adjusting the X-OVER you should consider the frequency response of the connected speakers.Calling the X-OVER adjusted valueCalling the pre-set X-OVER adjusted value.Touch [Preset1],[Preset2], or [Preset3] on the X-OVER screen.The setting stored in the Preset will be recalled.Setting Defeat[Defeat] is selected on the Sound setup menu in step 3. Refer to “Sound Setup Operation” (page 44).If Defeat is “On,” MX, Bass Max EQ, Download Sound Setting and Parametric EQ functions are turned OFF. This disables any settings made for these functions.Setting item: DefeatSetting content: Off (Initial setting) / OnVolume Setting[Volume] is selected on the Sound setup menu in step 3. Refer to “Sound Setup Operation” (page 44).You can change the volume of the sound heard when a button is touched. Setting item: Key Sound FeedbackSetting contents: 0 to 7 (Initial setting: 4) Setting the Volume for Each Source[Source Volume Setup] is selected on the Sound setup menu in step 3. Refer to “Sound Setup Operation” (page 44).The volume level for each source can be adjusted. Setting item: Radio / SiriusXM / DVD / CD / Compressed Media / iPod Music / iPod Video / Pandora / AUX / AUX3 / BLUETOOTH Audio*Setting contents: -14 to +14 (Initial setting: 0)*BLUETOOTH Pandora correspond to BLUETOOTH Audio.•Settable source differ depending on the connected device and settings. Front HPF Rear HPF Subw. LPF01GB00INE-W927HD.book Page 47 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-47.png)
![49-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESAbout the CrossoverCrossover (X-OVER):This unit is equipped with an active crossover. The crossover limits the frequencies delivered to the outputs. Each channel is controlled independently. Thus, each speaker pair can be driven by the frequencies for which they have been optimally designed.The crossover adjusts the HPF (high pass filter) or LPF (low pass filter) of each band, and also the slope (how fast the filter rolls off the highs or lows).Adjustments should be made according to the reproduction characteristics of the speakers. Depending on the speakers, a passive network may not be necessary. If you are unsure about this point, please consult your authorized Alpine dealer.•HPF (high pass filter): Cuts the lower frequencies and allows the higher frequencies to pass.•LPF (low pass filter): Cuts the higher frequencies and allows the lower frequencies to pass.•Slope: The level change (in dB) for a frequency change of one octave.•The higher the slope value, the steeper the slope becomes.•Adjust the slope to FLAT to bypass the HP or LP filters.•Do not use a tweeter without the HPF on or set to a low frequency, as it may cause damage to the speaker due to the low frequency content.•You cannot adjust the crossover frequency higher than the HPF or lower than the LPF.•Adjustment should be made according to the recommended crossover frequency of the connected speakers. Determine the recommended crossover frequency of the speakers. Adjusting to a frequency range outside that recommended may cause damage to the speakers.For the recommended crossover frequencies of Alpine speakers, refer to the respective Owner’s Manual. We are not responsible for damage or malfunction of speakers caused by using the crossover outside the recommended value.Source Setup Operation1Touch [Setup] icon of Top banner.The Setup main screen is displayed.2Touch [ (Source)].The Source Setup screen appears.3Select the desired item.Setting items: Source Layout / Disc / SiriusXM / AUX / RSE / BLUETOOTH Pandora4Touch [ ] or [ ] etc., to change its setting.•When the pop-up window for setup is displayed, touch [ ] to close the window after setting.5Touch [ ] to return to the previous screen.•Immediately after changing the Source Setup (while the system is writing data automatically) do not turn the ignition key to OFF. Otherwise, the settings may not be changed.Cut-off frequency (1/3 octave steps) Slope LevelHPF LPF HPF LPFLow range speaker ---- 20 Hz - 200 Hz ----FLAT, –6, –12, –18, –24 dB/oct.0 to–12 dBRear high range speaker20 Hz - 200 Hz ----FLAT, –6, –12, –18, –24 dB/oct.---- 0 to–12 dBFront high range speaker20 Hz - 200 Hz ----FLAT, –6, –12, –18, –24 dB/oct.---- 0 to–12 dBLow range High range(Different from actual display)Level adjusting(0 to –12 dB) Output frequency rangeSlope FLATSlope adjusting20 HzHPF cut-offfrequencyLPF cut-offfrequency(Different from actual display)Source SetupTo display the Source Setup Menu screen:Your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedures below.1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake.2 Keep pushing the foot brake and release the parking brake once then engage it again.3 When the parking brake is engaged for the second time, release the foot brake.•For automatic transmission vehicles, place the transmission lever in the Park position.Now, the locking system for the Source mode operation has been released. Engaging the parking brake can reactivate the Source Setup Menu, as long as the car’s ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of “To display the Source mode screen.”Each time the ignition is turned OFF, perform the procedure of “To display the Source mode screen.”The following steps 1 to 5 are common operations to each “Setting item” of Source Setup. Refer to each section for details.01GB00INE-W927HD.book Page 49 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-49.png)
![50-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Source Layout Setting[Source Layout] is selected on the Source setup menu in step 3.Refer to “Source Setup Operation” (page 49).You can set whether to switch sources by tracing the middle of the Audio/Visual Playback screen from right to left or from left to right. Refer to “Switching Sources” (page 25).Setting item: Slide Source ChangeSetting contents: On (Initial setting) / Off Disc Setting[Disc] is selected on the Source setup menu in step 3. Refer to “Source Setup Operation” (page 49).•You can perform DVD setup in DVD video mode.•Touch [Stop] before performing Disc setup.The audio language, subtitle language and DVD menu language can be set according to your preferences.Once set, this becomes the default language. This function is convenient if you always want to listen in English, for example. (The language setting is not effective on some discs. In this case, the default language is set at the factory.)•When the settings are changed, old settings are overwritten. Make a note of the current settings before making changes.•To temporarily change the language of the current disc, either do so from the DVD menu or by using the operation described in the section “Switching the Audio Tracks” (page 37).•If the disc does not include the selected language, the disc’s default language is set.To play in a language other than those displayed1 Touch [DVD Menu Language Code], [Audio Language Code] or [SUBT Language Code].The numeric keypad screen is displayed.2 Touch the 4-digit numeral of the language number.To reference language numbers, refer to “List of Language Codes” (page 88).3 Touch [OK] to memorize the number.•The setting content changes to “Other” if the desired language code is input.Set the language used for the menus (title menu, etc.).Setting item: DVD Menu LanguageSetting contents: Auto (Initial setting) / EN / JP / DE / ES / FR / IT / SE / RU / CN•When “Auto” is selected, the primary menu language among the recorded ones is played.•As for the language abbreviation, refer to “List of Language Codes” (page 88).Set the audio language produced from the speakers.Setting item: Audio LanguageSetting contents: Auto (Initial setting) / EN / JP / DE / ES / FR / IT / SE / RU / CN•When “Auto” is selected, the primary audio language among the recorded ones is applied.•As for the language abbreviation, refer to “List of Language Codes” (page 88).Set the language of the subtitles displayed on the screen.Setting item: SUBT. LanguageSetting contents: Auto (Initial setting) / EN / JP / DE / ES / FR / IT / SE / RU / CN•When “Auto” is selected, the primary subtitle language among the recorded ones is applied.•As for the language abbreviation, refer to “List of Language Codes” (page 88).Set the country code of which you want to set the rating level (Parental lock).Setting item: Country CodeSetting contents: Auto / Other•If settings are changed, the old settings are overwritten. Make a note of the current settings before making changes. The settings will be cleared if the vehicle’s battery is disconnected.1 Touch [Country Code Input].2 Touch [ ] or [Delete All].Delete the displayed country number.3 Touch the 4-digit country code.As for the country number, refer to “List of Country Codes” (page 89).4 Touch [OK] to memorize the code.On: Source is changed by tracingOff: Source is not changed by tracingChanging the Language SettingSetting of the DVD Menu LanguageSetting of the Audio LanguageSetting of the Subtitle LanguageChanging the Country Code SettingAuto: The primary country code among those recorded is played.Other: The setting content changes to “Other” if the desired country code is input.01GB00INE-W927HD.book Page 50 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-50.png)
![51-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESThis function can help limit the viewing of movies to children of appropriate age levels only.Setting item: Parental•If settings are changed, the old settings are overwritten. Make a note of the current settings before making changes. The memory will be cleared if the vehicle’s battery is disconnected.•On unrated discs, playback will not be restricted even if the rating level is set.•If you want to play back a disc with parental lock, and its use is currently restricted, change the rating level and the country number in order to play back the disc.•Once set, this rating level remains in memory until changed. To enable playback of discs of higher rating levels, or to cancel the parental lock, the setting must be changed.•Not all discs provide a parental lock. If you are unsure about a disc, play it first to confirm. Do not leave discs accessible to young children for whom you deem them inappropriate.1 Touch [Parental].The numeric keypad screen is displayed.2 Touch the numeric keypad to input a 4-digit password.The initial number is 1111. Input number are displayed as “*”.3 Touch [OK] to memorize the number.The Parental screen appears.Set the rating level of PARENTAL4 Touch [Parental].5 Touch [ ] on [ ] to turn “On".Select “Off” to cancel parental lock or if you do not want to set a rating level.6 Touch [ ] to return to the previous screen.7 Touch [Parental Level]8 Touch [ ] or [ ] to select the rating level (1 to 8).The smaller the number, the higher the restriction.9 Touch [ ] to return to the previous screen.Changing the password1 Touch [Password Change].The numeric keypad screen is displayed.2 Touch the input screen to enter a new 4-digit password.•Keep a note of the number somewhere safe in case you should forget it.3 Touch [OK] to memorize the number.4 Touch [ ] to return to the previous screen.Use the procedure described below to modify the output screen according to the type of TV monitor (rear monitor) being used.If the rear monitor is not connected, the screen setting is 16:9.Setting item: TV ScreenSetting contents: 4:3LB / 4:3PS / 16:9 (Initial setting)•For some discs, the picture may not be set to the selected screen size. (For details, refer to the explanation on the disc’s jacket.)4:3 LETTER BOX:Select this when connected to a conventional 4:3 size (normal TV aspect ratio) monitor. There may be black stripes visible at the top and bottom of the screen (when playing a 16:9 size movie). The width of these stripes will depend upon the original aspect ratio of the theatrical release of the movie.4:3 PAN-SCAN:Select this when connected to a conventional 4:3 size monitor. The picture will fill the entire TV screen. However, due to the mismatch in aspect ratio, parts of the movie at the extreme left and right sides will not be visible (when playing a 16:9 size movie).16:9 WIDE:Select this when connected to a wide screen TV. This is the factory setting.Setting the Rating Level (Parental Lock)Changing the rating level temporarilySome discs may request that you change the rating level set in the default settings during playback. In this case, the message “Do you wish to change Parental level? [OK] [Cancel].”If this screen appears, change the level as follows:•To change parental level and play, touch [OK].When [OK] is touched, the numeric keypad input screen is displayed. Input the 4-digit password you set in “Setting the Rating Level (Parental Lock),” then touch [OK].•To play without changing the parental level, touch [Cancel].(If [Cancel] is touched, playback will be at the parental level set in “Setting the Rating Level (Parental Lock).”)Setting the TV Screen Mode01GB00INE-W927HD.book Page 51 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-51.png)
![52-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Sirius XM Setting[SiriusXM] is selected on the Source setup menu in step 3. Refer to “Source Setup Operation” (page 49).The following operations can be performed to manage the stored Songs, Artists and Sports teams information. (To learn about how to store the information, refer to “Storing the Desired Song/Artist” on page 76 and “Setting the Favorite Sports Team Alerts” on page 52.)Setting item: Alert SetupSetting the Alert individually for a Song/Artist/Sport TeamYou can manage the stored Alert (Songs, Artists, Sports teams) individually by this setting.1Touch [Alert list].The Alert List screen is displayed. 2Touch [On] or [Off] of the desired song, artist or team.Set to ON if you want to receive this alert.Set to OFF if you do not want to receive this alert.•To delete the list, touch [Delete], and then touch [OK].Setting ON/OFF of all Songs/Artists/Games AlertDetermines whether the received alert of all stored Songs/Artist/Games is set or not.1Touch [Alert].2Touch [ ] or [ ] of the Alert to select ON/OFF.Deleting all stored AlertThe operation will delete all stored songs, artists and teams alert information.1Touch [Delete All].A message is displayed.2Touch [Yes] to clear the information of all stored Artist, Song, and Game alert items.Touch [No] to cancel. This menu option allows you to select your favorite teams, organized by leagues, so that you will be alerted later when your favorite teams are playing on other channels. Some sports, individuals are considered ‘teams’.Setting item: Game Alert Setup 1Touch [Game Alert Setup].The Game Alert Setup screen is displayed.2Select the desired league.The display changes to the team list of the selected league.3Touch the abbreviations for your favorite teams. Once selected, you will be alerted when games that those teams are playing in can be heard on a SiriusXM channel.A “Team Saved X Used/Y Empty” pop up screen is displayed.X is the total number of song titles, artist names or sports team stored in memory, and Y is the total number of memory song titles, artist names or sports teams still available for storage.•Teams that you have selected will be indicated with an asterisk “*”.•If the memory is full, you cannot select a new team. To add another team alert, you need to delete a selected one first. Touch the team (with “*” mark) you want to delete, a message will display. Touch [Yes] to delete it and touch [No] to cancel. You can also delete a team from the Alertlist, for details, refer to “Managing Artist, Song and Sports Team Alerts” on page 52.Managing Artist, Song and Sports Team AlertsON: Set to receive alert.OFF: No alert.Setting the Favorite Sports Team Alerts01GB00INE-W927HD.book Page 52 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-52.png)
![53-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESYou can lock out channels with passcode protection. Channels that are locked cannot be accessed without entering the passcode. You can unlock a channel or change the passcode using this menu option.Setting item: Parental Lock1Touch [Parental Lock].The numeric keypad screen is displayed.2Touch the numeric keypad to input a 4-digit passcode.The initial number is 0000.Input number are displayed as “*” (asterisk).3Touch [OK].Or touch [ ] to cancel entry of the passcode or touch [Delete All] to erase the digits that you have entered so you can start over or touch [ ] to erase the last digit that you entered.After the correct passcode is entered, the Parental Lock options menu is display.Clearing the Lock of ALL the locked Channels4Touch [Clear All Locked Channels].5Touch [OK] to clear the lock of all the locked channels.Touch [Cancel] to cancel.Setting the Lock status of individual channels4Touch [Locked Channels].The channels list screen is displayed.5Select the desired channel.6Touch [ ] or [ ] to select On/Off.7Touch [ ] to return to the previous screen.Changing the Lock Passcode4Touch [Edit Code].The numeric keypad screen is displayed.5Use the keypad to enter the current (old) 4-digit passcode. (The initial passcode is set to 0000).Touch [Enter] to confirm the entry. Touch [Delete All] to erase all of the digits that you entered.Touch [ ] to erase the last digit you entered.Touch [ ] to abort changing the passcode.6Now use the keypad to enter the new 4-digit passcode. 7Touch [OK].8Then use the keypad to enter the new 4-digit passcode a second time to verify it. •Remember to keep a note of the passcode in a safe place in case you forget the code.While listening to a SiriusXM Channel, the Signal strength of the current channel will be displayed.Setting item: Signal IndicatorThis menu item displays the SiriusXM signal strength as Strong, Good, Weak or No Signal.•If the Signal Indicator reports Weak or No Signal and your vehicle is parked outside with no obstructions to the southern sky, then your SiriusXM antenna may not be properly installed or may have become damaged.AUX Setting[Aux] is selected on the Source setup menu in step 3. Refer to “Source Setup Operation” (page 49).Setting item: AUX InSetting contents: Off / On (Initial setting)Setting the Parental LockSignal Strength InformationSetting the AUX ModeOff: AUX source is not displayed.On: AUX source is displayed.01GB00INE-W927HD.book Page 53 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-53.png)
![54-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)When AUX In is set to “ON”, this setting is available.Setting item: Primary NameSetting contents: AUX1 (Initial setting) / DVD / GAME / EXT.DVD / DVD-CHG. / DVB-T / TV•When a DVB-T tuner (sold separately) is connected, you can use it to connect one more External Input device. Setting the Secondary name can change the mode name display of this device. Setting the Secondary AUX NameSecondary name can be set only when Primary name is set to “DVB-T.”Setting item: Secondary NameSetting contents: Off (Initial setting) / AUX2 / DVD / GAME / EXT.DVD / DVD-CHG. / DVB-T* / TV* If the Primary Name is DVB-T, DVB-T is not displayed as a Secondary Name option. •The selected source name is displayed instead of AUX mode name.Switching the Visual Input Signal SystemAfter setting to “On” in “Setting the AUX Mode,” this setting can be carried out. The video input type can be changed.Setting item: SignalSetting contents: Auto (Initial setting) / NTSC / PALConnection with external input devices is available through the iPod VIDEO connector. An optional adapter cable is required (standard RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).You can also play back video connecting with an optional AV cable (4-pole mini AV plug to 3-RCA).Setting item: AUX3 In Sel.Setting contents: iPod Video (Initial setting) / AUX3Usable 4-pole mini AV plugThe unit accepts the following 4-pole mini AV plug pin-out:•Please check pin-out carefully before use of this product. Depending on the cable, there may be no picture and/or sound.After setting to “AUX3” in “Setting the AUX3 In Sel.,” this setting can be carried out. The video input type can be changed.Setting item: AUX3 SignalSetting contents: Auto (Initial setting) / NTSC / PALRSE Setting[RSE] is selected on the Source setup menu in step 3. Refer to “Source Setup Operation” (page 49).Video and audio can be output to the rear monitor. Setting item: RSE Setting contents: Off (Initial setting) / On•If you selected the “On” setting, set the “Remote Sensor Setting” (page 40).Setting the BLUETOOTH Pandora®[BLUETOOTH Pandora] is selected on the Source setup menu in step3. Refer to “Source Setup Operation” (page 49).To use BLUETOOTH Pandora, set the BLUETOOTH Pandora setting to “On.” Setting item: BLUETOOTH PandoraSetting contents: Off / On (Initial Setting)•When “On” is set, the BLUETOOTH Pandora® source is displayed on the Top banner on the Audio/Visual screen.Setting the Primary AUX Name (AUX Setup)Auto: The video input signal type (NTSC or PAL) will be automatically selected.NTSC/PAL: Choose the video input signal type manually.Setting the AUX3iPod Video: Set when connected to an iPod or iPhone.AUX3: Set when connected to an external input device.Audio L (White)Audio R (Red)GroundVideo (Yellow)Setting the AUX3 Sel. (Switching the Visual Input Signal System)Auto: The video input signal type (NTSC or PAL) will be automatically selected.NTSC/PAL: Choose the video input signal type manually.Setting the Rear Seat Entertainment System01GB00INE-W927HD.book Page 54 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-54.png)
![55-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESBLUETOOTH Setup Operation1Touch [Setup] icon of Top banner.The Setup main screen is displayed.2Touch [ (BLUETOOTH)].The BLUETOOTH Setup screen appears.3Select the desired item.Setting items: BLUETOOTH / BLUETOOTH Info. / Set BLUETOOTH Device / AutoConnect / Passcode Change / Default Phonebook Encoding / Auto Answer / Auto Answer Time / Phone Speaker / Ring Tone Volume / Microphone Level / Caller Volume / Delete Call History4Touch [ ] or [ ] etc., to change its setting.•When the pop-up window for setup is displayed, touch [ ] to close the window after setting.5Touch [ ] to return to the previous screen.•Immediately after changing the BLUETOOTH Setup (while the system is writing data automatically) do not turn the ignition key to OFF. Otherwise, the settings may not be changed.•For details on how to scroll through the list, refer to “Selecting an Item in a List” (page 26).BLUETOOTH Setting[BLUETOOTH] is selected on the BLUETOOTH setup menu in step 3. Refer to “BLUETOOTH Setup Operation” (page 55). Setting item: BLUETOOTHSetting contents: Off / On (Initial setting)•If the Bluetooth setting is “Off,” you cannot move to the BLUETOOTH setting screen.Displaying BLUETOOTH Information [BLUETOOTH Info] is selected on the BLUETOOTH setup menu in step 3. Refer to “BLUETOOTH Setup Operation” (page 55).You can display the BLUETOOTH device name and device address of this unit.Setting item: BLUETOOTH InfoRegistering the BLUETOOTH Device[Set BLUETOOTH Device] is selected on the BLUETOOTH setup menu in step 3. Refer to “BLUETOOTH Setup Operation” (page 55).The BLUETOOTH device is used when a connectable BLUETOOTH compatible device is searched and connected from this unit, or a new BLUETOOTH compatible device is registered.1Touch [Set BLUETOOTH Device].2Touch [Search] of “No Device.”The Device list displays up to 10 items.3Touch [Audio],[Hands-free] or [Both] of the device you want to connect from the list.•You can connect (pair) up to 5 BLUETOOTH compatible mobile phones.4When the device registration is complete, a message appears and the device returns to normal mode.•The BLUETOOTH registration process differs depending on the device version and SSP (Simple Secure Pairing). If a 4 or 6 character Passcode appears on this device, enter the Passcode using the BLUETOOTH compatible device.If a 6 character Passkey appears on this device, make sure the same passkey is displayed on the BLUETOOTH compatible device and touch “Yes.”•If all the 5 devices have been registered, you cannot register the 6th device. To register another device, you need to delete one of the devices from position 1 to 5 first.BLUETOOTH SetupTo display the BLUETOOTH Setup Menu screen:Your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedures below.1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake.2 Keep pushing the foot brake and release the parking brake once then engage it again.3 When the parking brake is engaged for the second time, release the foot brake.•For automatic transmission vehicles, place the transmission lever in the Park position.Now, the locking system for the BLUETOOTH mode operation has been released. Engaging the parking brake can reactivate the BLUETOOTH Setup Menu, as long as the car’s ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of “To display the BLUETOOTH mode screen.”Each time the ignition is turned OFF, perform the procedure of “To display the BLUETOOTH mode screen.”The following steps 1 to 5 are common operations to each “Setting item” of BLUETOOTH Setup. Refer to each section for details.Off: BLUETOOTH function is not used.On: Select when you would like to pair your BLUETOOTH compatible phone with this unit.Audio: Sets for use as an Audio deviceHands-free: Sets for use as a Hands Free Device. Both: Sets for use as both an Audio device and Hands Free Device.01GB00INE-W927HD.book Page 55 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-55.png)
![56-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Setting the BLUETOOTH DeviceSelect one of 5 paired BLUETOOTH compatible devices that you previously registered.1Touch [Set BLUETOOTH Device].2Touch [Audio] or [Hands-free] of the device you want to connect from the Paired Device list.Deleting a BLUETOOTH Device from the listYou can delete the information of a previously connected BLUETOOTH compatible device.1Touch [Set BLUETOOTH Device].2Touch [Delete] of the BLUETOOTH compatible device to delete from the Paired Device list.3Touch [OK].•Touching [Cancel] will cancel the setting.Automatic Connection Setting[Auto Connect] is selected on the BLUETOOTH setup menu in step 3. Refer to “BLUETOOTH Setup Operation” (page 55).If the Automatic Connecting setting is “On,” automatic connection is performed for the audio device registered in the Paired Device list. Setting item: Auto ConnectSetting contents: Off / On (Initial setting)Setting the Passcode[Pass code Change] is selected on the BLUETOOTH setup menu in step 3. Refer to “BLUETOOTH Setup Operation” (page 55).You can set the code for connecting with a BLUETOOTH compatible device. Setting item: Passcode Change1Touch [Passcode Change].A numeric keypad screen is displayed. 2Enter a 4-digit passcode, and then touch [Enter].•The initial number is 0000.•For details on how to input the numeric keypad, refer to “Numeric Keypad Input Operations” (page 35).Changing the Character Code of the Phone Book[Default Phonebook Encoding] is selected on the BLUETOOTH setup menu in step 3. Refer to “BLUETOOTH Setup Operation” (page 55).You can select the character code that is used when transferring the phone book or history from a mobile phone. If unreadable characters appear in the transferred data, select the correct character code.Setting item: Default Phonebook EncodingSetting contents: EU1 / EU2 (Initial setting) / Russian / Chinese / Thai / Arabic / Unicode UTF-8 / Unicode UTF-16LE / Unicode UTF-16BE1Touch [Default Phonebook Encoding].The Character code list screen is displayed.2Touch the desired character code.3Touch [OK].Setting Received Calls Automatically[Auto Answer] is selected on the BLUETOOTH setup menu in step 3. Refer to “BLUETOOTH Setup Operation” (page 55).When a call is received, you can set whether to answer it automatically or not.Setting item: Auto Answer Setting contents: Off (Initial setting) / OnEU1: ISO 8859-1EU2: ISO 8859-15Russian: ISO 8859-5Chinese: GB18030Thai: CP874Arabic: CP1256Unicode UTF-8Unicode UTF-16LEUnicode UTF-16BEOn: When a call is received, it will be answered automaticallyOff: When a call is received, it will not be answered automatically01GB00INE-W927HD.book Page 56 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-56.png)
![57-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESSetting the Time for Automatic Reception of a Call[Auto Answer Time] is selected on the BLUETOOTH setup menu in step 3. Refer to “BLUETOOTH Setup Operation” (page 55).When “Auto Answer” is set to “On,” you can set how many seconds to let elapse before letting the Auto Answer pick up the call.Setting item: Auto Answer Time Setting contents: 5sec / 10sec (Initial setting) / 15sec / 20sec1Touch [Auto Answer Time].The Auto Answer setting screen is displayed.2Touch [ ] or [ ].Selecting the Output Speaker[Phone Speaker] is selected on the BLUETOOTH setup menu in step 3. Refer to “BLUETOOTH Setup Operation” (page 55).You can select which speaker in the car will output the audio from the phone.Setting item: Phone Speaker Setting contents: All (Initial setting) / Front L / Front R / Front LR•The setting cannot be adjusted during a phone call. Adjust the setting before placing a call.Adjusting the Ring Tone Volume[Ring Tone Volume] is selected on the BLUETOOTH setup menu in step 3. Refer to “BLUETOOTH Setup Operation” (page 55).You can adjust the volume of the incoming call. Setting item: Ring Tone Volume Setting contents: 1 to 11 (Initial setting: 5)Adjusting the Microphone Level[Microphone Level] is selected on the BLUETOOTH setup menu in step 3. Refer to “BLUETOOTH Setup Operation” (page 55).You can adjust the microphone level, during the call.Setting item: Microphone Level Setting contents: 1 to 11 (Initial setting: 5) Adjusting the Caller Volume[Caller Volume] is selected on the BLUETOOTH setup menu in step 3. Refer to “BLUETOOTH Setup Operation” (page 55).You can adjust the receive volume, during the call.Setting item: Caller Volume Setting contents: 1 to 11 (Initial setting: 5)Deleting All the Histories[Delete Call History] is selected on the BLUETOOTH setup menu in step 3. Refer to “BLUETOOTH Setup Operation” (page 55).Dialled/Received/Missed Incoming histories are all deleted.Setting item: Delete Call History1Touch [Delete Call History]The confirmation screen is displayed.•When there is no history, this option is not available.2Touch [OK].All the histories are deleted.All: The sound is output from all speakers in car.Front L: The sound is only output from the front left speaker.Front R: The sound is only output from the front right speaker.Front LR: The sound is output from the front left and front right speakers.01GB00INE-W927HD.book Page 57 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-57.png)
![58-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Camera Setup OperationWith an optional camera connected, its video is output to the monitor. When the camera is connected, set this item.1Touch [Setup] icon of Top banner.The Setup main screen is displayed.2Touch [ (CAMERA)].The Camera Setup screen appears.3Select the desired item.Setting items: Direct Camera / AUX Camera* / Camera Interrupt (Power OFF Mode)4Touch [ ] or [ ] etc., to change its setting.•When the pop-up window for setup is displayed, touch [ ] to close the window after setting.5Touch [ ] to return to the previous screen.•Immediately after changing the Camera Setup (while the system is writing data automatically) do not turn the ignition key to OFF. Otherwise, the settings may not be changed.•For details on how to scroll through the list, refer to “Selecting an Item in a List” (page 26).Direct Camera Setting[Direct Camera] is selected on the Camera setup menu in step 3. Refer to “Camera Setup Operation” (page 58).Setting item: Camera Select / Guide Adjustment*1Setting contents: Off (Initial setting) / Front / Rear*2*1If “Camera Select” is set to “Off”, this option is not available.*2If “Camera Select” in AUX Camera Setting is set to “Rear,” “Rear” cannot be set in Direct Camera Setting.Switching video patterns for Rear camera & Front cameraThe video pattern can be changed when connected to HCE-C200R/HCE-C200F/HCE-C210RD/HCE-C212F.Setting item: Guide Adjustment1Touch [Guide Adjustment].The camera guide adjustment screen is displayed.2Touch [Back],[Panorama],[Corner], or [Top].The view will change to the selected view. •[Back] will not appear for the Front camera.3Touch [ ] to return to the previous screen.•For an explanation of video patterns, see the camera Owner's Manual.Adjusting the Rear/Front Camera GuideIf you select “Rear” or “Front,” you can adjust the camera guide position.Setting item: Guide Adjustment1Touch [Guide Adjustment].The camera guide adjustment screen is displayed.•If the video pattern is set to “Corner,” the camera guide will not be displayed.2Touch [Adjust].•If [Adjust] does not appear, proceed to step 3.3Touch the guide you intend to adjust.Guide line can also be selected by touching [ ] [ ].Display example for rear camera modeCamera SetupTo display the Camera Setup Menu screen:Your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedures below.1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake.2 Keep pushing the foot brake and release the parking brake once then engage it again.3 When the parking brake is engaged for the second time, release the foot brake.•For automatic transmission vehicles, place the transmission lever in the Park position.Now, the locking system for the Camera mode operation has been released. Engaging the parking brake can reactivate the Camera Setup Menu, as long as the car’s ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of “To display the Camera mode screen.”Each time the ignition is turned OFF, perform the procedure of “To display the Camera mode screen.”The following steps 1 to 5 are common operations to each “Setting item” of Camera Setup. Refer to each section for details.Setting the Camera InputRear: Rear cameraFront: Front camera01GB00INE-W927HD.book Page 58 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-58.png)
![59-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESDisplay example for front camera mode4Touch [ ],[ ],[ ] or [ ] to adjust the position of the guide.•Touching [Clear] clears adjustments and returns to the setting before guide line alteration. 5After the adjustment is completed, touch [Set].Adjusting guides simultaneously (for Rear camera only)1Touch [Link].The 3 vertical guides of the currently-selected guide link together, allowing them to be adjusted simultaneously.Turning guide display ON/OFFTurning the selected guide off.1Touch [ON/OFF].The currently selected guide will turn off.2To turn the guide on, touch [ON/OFF] again.•Guides that are turned off are still adjustable.Returning guides to default1Touch [Default].A message window will appear.2Touch [OK].Adjusted values will return to default settings.AUX Camera Setting[AUX Camera] is selected on the Camera setup menu in step 3. Refer to “Camera Setup Operation” (page 58). Setting item: Camera Select / Camera Signal*1/ Guide Adjustment*1Setting contents: Off / Rear*2 (Initial setting) / OTHER*1If “Camera Select” is set to “Off”, this option is not available.*2If “Camera Select” in Direct Camera Setting is set to “Rear,” “Rear” cannot be set in AUX Camera Setting.Setting the AUX Camera Signal InputWhen the AUX camera is connected, the video input signal type can be chosen.Setting item: Camera SignalSetting contents: NTSC (Initial setting) / PALAdjusting the Rear Camera GuideIf you select “Rear” you can adjust the camera guide position.Setting item: Guide Adjustment1Touch [Guide Adjustment].The camera guide adjustment screen is displayed.2Touch [Adjust].•If [Adjust] does not appear, proceed to step 3.3Touch the guide you intend to adjust.Guide line can also be selected by touching [ ] [ ].4Touch [ ],[ ],[ ] or [ ] to adjust the position of the guide.•Touching [Clear] clears adjustments and returns to the setting before guide line alteration. 5After the adjustment is completed, touch [Set].Setting the Camera InputRear: Rear cameraOTHER: Side camera, Room camera, etc.01GB00INE-W927HD.book Page 59 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-59.png)
![60-EN01GB05INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Adjusting guides simultaneously (for Rear camera only)Touch [Link].The 3 vertical guides of the currently-selected guide link together, allowing them to be adjusted simultaneously.Turning guide display ON/OFFTurning the selected guide off.1Touch [ON/OFF].The currently selected guide will turn off.2To turn the guide on, touch [ON/OFF] again.•Guides that are turned off are still adjustable.Returning guides to default1Touch [Default].A message window will appear.2Touch [OK].Adjusted values will return to default settings.Camera Interrupt Setting (Power OFF Mode)[Camera Interrupt] is selected on the Camera setup menu in step 3. Refer to “Camera Setup Operation” (page 58).You can set whether to display the rear camera image when the gear lever is moved to the reverse (R) position while the unit is turned off.Setting item: Camera Interrupt (Power OFF Mode)Setting contents: On (Initial setting) / OffOn: The rear camera image is displayedOff: The rear camera image is not displayed01GB00INE-W927HD.book Page 60 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-60.png)
![61-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESSetup Before UsingBLUETOOTH is a wireless technology allowing communication between a mobile device or personal computer over short distances. This enables a hands-free call or data transmission between BLUETOOTH compatible devices. BLUETOOTH transmission is available in the unlicensed 2.4 GHz spectrum if the distance between devices is within 10 meters. For details, refer to the BLUETOOTH website (http://www.bluetooth.com/).•Depending on the BLUETOOTH version, a BLUETOOTH compatible device may not be able to communicate with this unit.•Proper function of this unit with all BLUETOOTH compatible devices is not guaranteed. For handling of the BLUETOOTH compatible device, consult your ALPINE dealer or ALPINE website.•Depending on the surroundings, BLUETOOTH wireless connection may be unstable.•When you place a call, or perform setup operations, be sure to stop your car in a safe place.•Depending on the connected BLUETOOTH compatible device(s), the function may differ. Also refer to the Owner’s Manual of the connected device(s).Hands-free calls are possible when using a HFP (Hands-Free Profile) compatible mobile phone with this unit.•Avoid performing a hands-free call in heavy traffic or on narrow or winding streets.•Close the windows while calling to reduce background noise.•If both calling parties are using hands-free devices, or the call is made in a noisy location, difficulty hearing the other person’s voice is normal. •Depending on telephone line conditions or certain mobile devices used, voices may sound unnatural.•When using a microphone, speak as directly as you can into the microphone to obtain the best sound quality.•Certain mobile phone features are dependent on the capabilities and settings of your service provider’s network. Additionally, certain features may not be activated by your service provider, and/or the provider’s network settings may limit the feature’s functionality.Always contact your service provider about feature availability and functionality.All features, functionality, and other product specifications, as well as the information contained in the Owner’s Manual are based upon the latest available information and are believed to be accurate at the time of printing.Alpine reserves the right to change or modify any information or specifications without notice or obligation.Before using the hands-free phone/audio function, the following settings need to be made.1Set “BLUETOOTH” to “On” (see page 55).2Register a BLUETOOTH device in this unit (see page 55).•Refer to “BLUETOOTH Setting” (page 55).•You can search for this unit using a BLUETOOTH compatible device, and then connect that BLUETOOTH compatible device to this unit. The device name of this unit is “ALPINE NAVI” and the initial number of the passcode is “0000.” Also refer to the Owner’s Manual of the connected device(s).Display example for Phone menu screenBLUETOOTH devices NameFavorites Display: Short Cut iconDialled/Received/Missed Display: Each histories iconConnecting a BLUETOOTH DeviceRegistering a BLUETOOTH device in INE-W927HD enables automatic connection. If it does not connect automatically, run through the connection procedure again.1Press the (PHONE) button.The Phone menu screen is displayed.2Touch [Connect].BLUETOOTH connection will start.Touch [Disconnect].The BLUETOOTH connection is disconnected.BLUETOOTH OperationAbout BLUETOOTHAbout the Hands-Free PhoneBefore Using BLUETOOTHHands-Free Phone ControlDisconnecting the BLUETOOTH Connection01GB00INE-W927HD.book Page 61 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-61.png)
![62-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Changing the connecting BLUETOOTH DeviceIf multiple BLUETOOTH devices are registered in this device, you can change the connection among the registered devices.1Press the (PHONE) button.The Phone menu screen is displayed.2Touch [Change].The Set Bluetooth Device screen is displayed.3Touch [Audio] or [Hands-free] of the selected device.The connection will transfer to the selected device. •You can check registered shortcut dialing by touching the BLUETOOTH Device List.For how to assign one-touch dialing, refer to “Assigning as a Short Cut Dialing Number” (page 64).Answering a CallIncoming calls are announced by the received call ring tone and a displayed message (PHONE No., etc.).1An incoming call triggers the ringtone and an incoming call display.2Touch [ ] or press (PHONE) button.The call starts.•When “Setting Received Calls Automatically” (page 56) is set to “On,” you can receive a call automatically.•During a call, the audio for the current mode on the unit is muted. After calling, playback will resume.•When the caller’s number is transmitted to the system, if the caller’s name is stored in the phone book, the name is displayed. If the name is not stored, the number is displayed. When neither the name or the number is unavailable, “Unknown” is displayed.The ringtone volume is adjustable on the incoming call message screen.Touch [ ] or [ ] for “Vol.”Hanging up the TelephoneTouch [ ].The call finishes.CallingUse the Phone menu screen to make a phone call.You can assign up to 4 phone numbers for one-touch dialing to make a call easily. For how to assign one-touch dialing, refer to “Assigning as a Short Cut Dialing Number” (page 64).1Press the (PHONE) button.The phone menu screen is displayed.2Touch [ Favorites].3Touch [Dial1],[Dial2],[Dial3] or [Dial4].The phone call is sent to the stored number.•Pressing and holding [Dial1],[Dial2],[Dial3] or [Dial4] displays the Shortcut Dialing Edit screen. The only available editing operation is deletion.•If a name has been registered, the name is displayed on the shortcut button.You can use 3 types of history to make a phone call. Call History saves up to 60 phone numbers. If the limit is exceeded, the oldest phone number is deleted.1Press the (PHONE) button.The phone menu screen is displayed.2Touch [ Dialled],[ Received] or [ Missed].The last four histories are displayed.3Touch the name from the call history.The details screen of the call history is displayed.•To display all the histories, touch [All]. Touching [Delete]deletes the selected histories.4Touch [ ].The phone call is started.Adjusting Ringtone VolumeUsing Short Cut Dialing to Make a CallDialing a Number in Call History01GB00INE-W927HD.book Page 62 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-62.png)
![63-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESYou can use the phone book of the mobile phone to make a phone call. Before using, you need to transfer the phone book from the mobile phone to the system. For details on how to transfer the phone book, refer to “Synchronizing the Phone Book” (page 63).1Press the (PHONE) button.The phone menu screen is displayed.2Touch .3Touch the person name or the telephone number from the Phone Book list.4Touch [ ].The phone call is started.1Press the (PHONE) button.The phone menu screen is displayed.2Touch .The number input screen appears.3Enter the phone number you wish to call.•You can enter up to 31 digits.4Touch [ ].5Touch [Call].The phone call is started.You can redial the person you have previously called.1Press the (PHONE) button.The phone menu screen is displayed.2Touch [Redial].The number is redialed.3Touch [Call].The phone call is started.Operations During a ConversationDisplay exampleName and phone numberConversation timeYou can adjust the transmit volume and receive volume respectively.Touch [ ] or [ ] for “Vol.”You can adjust the volume in 11 levels.Touch [ ] to turn down the volume. Touch [ ] to turn up the volume. The voice output for calls is switchable between car speakers and the mobile phone speaker.Touch [ ].•Depending on the mobile phone, this operation may not be possible.Transmits a DTMF (Touch-Tone) during a call.1Touch [Tone].The number input screen appears.2Input number.•You can transmit a Touch-Tone signal during a call.•Touching and holding “0” initiates “+” tone transmission.Phone Book FunctionDisplay example for Phone Book screenAn icon is displayed to indicate that multiple phone numbers are registered under an entry. You can synchronize the system’s phone book with the mobile phone’s phone book.1Press the (PHONE) button.The phone menu screen is displayed.2Touch [ ].3Touch [Download].4Touch [SYNC].Synchronization of the phone books starts.Dialing a Number in the Phone BookEntering a Phone Number to Make a CallRedial FunctionAdjusting the Speech Volume : Outgoing volume : Incoming volumeChanging the Voice OutputDTMF (Touch-Tone) FunctionSynchronizing the Phone Book01GB00INE-W927HD.book Page 63 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-63.png)
![64-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)•You can store up to 1,000 phone numbers in the phone book for USER1 and USER2, respectively.•You can store up to 5 phone numbers by one person’s name.1Press the (PHONE) button.The phone menu screen is displayed.2Touch [ ].3Touch [Download].4Touch [Add].Stays on standby for connection of the mobile phone.•Touch [Cancel] to cancel the standby mode.5The mobile phone accesses this unit and then transfers the phone book from the mobile phone to this unit.•Mobile phone connection is canceled while the phone book is being transferred.Deleting One Entry from the Phone Book1Press the (PHONE) button.The Phone menu screen is displayed.2Touch [ ].The Phone Book screen is displayed.3Touch the phone number you intend to delete.4Touch [Delete].The confirmation screen is displayed.If multiple phone numbers are registered, they are all deleted.5Touch [OK].The selected number is deleted.Deleting All Entries from the Phone Book1Press the (PHONE) button.The Phone menu screen is displayed.2Touch [ ].The Phone Book screen is displayed.3Touch [Delete All].The confirmation screen is displayed.4Touch [OK].All entries of the phone book are deleted.Assigning as a Short Cut Dialing NumberAssigning from Call History1Press the (PHONE) button.The Phone menu screen is displayed.2Touch [Dialled],[Received] or [Missed].The last four histories are displayed.3Touch the person name you intend to assign as the Short Cut dialing number.The details screen of the Phone book is displayed.•To display all the histories, touch [All]. Touching [Delete]deletes the selected histories.4Touch [Preset].The details screen for the Short Cut is displayed.5Touch [Save].The phone number is assigned to the selected Short Cut dialing number.•If Dial1, Dial2, Dial3 or Dial4 is already registered, it is overwritten.•Touch [Delete] to delete an assigned short cut dialing number.Assigning from the Phone Book1Press the (PHONE) button.The Phone menu screen is displayed.2Touch [ ].The Phone Book screen is displayed.3Touch the phone number you intend to assign as the Short Cut dialing number.The details screen of the Phone book is displayed.4Touch [Preset].The details screen for the Short Cut is displayed.5Touch [Save].The phone number is assigned to the selected Short Cut dialing number.•If Dial1, Dial2, Dial3 or Dial4 is already registered, it is overwritten.•Touch [Delete] to delete an assigned short cut dialing number.Adding the Phone BookDeleting the Phone Book Entries01GB00INE-W927HD.book Page 64 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-64.png)
![65-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESCall Waiting FunctionIf a call comes in from another phone during a call, a notice is displayed on the screen. This function can only be used if the connected mobile phone has a call waiting function service included.Receiving calls during a current call If a new call comes in during a current call, a screen allowing you to negotiate the new call is displayed.Touch [ ] to take the new call and put the current party on hold.Touch [ ] to not take the new call and continue your call with the current party.Touch [ ] to end your call with the current call and take the new call.Switching callsTouch to switch the call.•This unit supports only the Call Waiting function of a mobile phone. The second call function and three-way calling function of a mobile phone cannot be operated from this unit. Also the screen display may malfunction.If a BLUETOOTH compatible mobile phone, portable player, etc. is connected by wireless, you can play back a song (operation is controllable from the unit).Display example for BLUETOOTH Audio main screenSong titleArtist titleAlbum titleElapsed timeBLUETOOTH devices Name•The displayed onscreen buttons may differ depending on the AVRCP version.•Status Indicator/Song title/Artist title/Album title/Elapsed time do not display for AVRCP Ver. 1.0.•To play back audio, a mobile phone or a portable player conforming to A2DP (Advanced Audio Distribution Profile) or AVRCP (Audio/Video Remote Control Profile) is required. Not all functions work with all devices.•During a call, sound on the BLUETOOTH audio source is muted.Compatible AVRCP versions: 1.0, 1.3, 1.4•Available functions may differ depending on the AVRCP version.Playback1Press the (SOURCE) button.2Touch [BLUETOOTH-AUDIO] of Top banner.3Touch [ ] or [ ] to select the desired track (file).Returning to the beginning of the current file:Touch [ ].Fast backward the current file:Touch and hold [ ].Advance to the beginning of the next file:Touch [ ].Fast forward the current file:Touch and hold [ ].4To pause playback, touch [ / ].BLUETOOTH AudioTouch [<<], [>>]01GB00INE-W927HD.book Page 65 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-65.png)
![66-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Repeat PlayAvailable for AVRCP Ver. 1.3 and 1.4 only.Touch [ ] during playback.The repeat mode switches every time the button is touched.•Operations may differ depending on the connected BLUETOOTH compatible device.M.I.X. (Random Play)Available for AVRCP Ver. 1.3 and 1.4 only.Touch [ ] during playback.The M.I.X. mode switches every time [ ] is touched.•Operations may differ depending on the connected BLUETOOTH compatible device.Selecting GroupsAvailable for AVRCP Ver. 1.3 and 1.4 only.Touch [ Group] or [Group ] to select the group.Search FunctionAvailable for AVRCP Ver. 1.4 only.The displayed list differs with the connected BLUETOOTH device. Touch [ (Search)] of Bottom banner during playback.Select the track, etc., you want to listen to from the displayed list.Operating Auxiliary Devices (Optional)To operate devices connected to the AUX terminals of INE-W927HD, follow the procedure described below.•Set AUX In to “On.” Refer to “Setting the AUX Mode” (page 53).•Depending on the connected unit, the onscreen buttons may not work, or their operation may differ.•If you try to activate the auxiliary device while driving, the display will show the warning-Picture off for your safety.1Press the (SOURCE) button.2Touch [AUX1]*1,[AUX2]*1 or [AUX3]*2 of Top banner.The AUX mode screen is displayed.*1The name which is given as the mode name in “Setting the Primary AUX Name (AUX Setup)” (page 54) and “Setting the Secondary AUX Name” (page 54) is displayed.*2When “Setting the AUX3” (page 54), AUX3 appears when setting ”AUX” only. (FILE) (OFF) (ALL) (GROUP) (GROUP) (ALL) (OFF)Auxiliary Device (Optional)WARNINGIt is dangerous (and illegal in many states) for the driver to watch TV/video while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur.Install the INE-W927HD correctly so that the driver cannot watch TV/video unless the vehicle is stopped and the emergency brake is applied. If the INE-W927HD is not installed correctly, the driver will be able to watch TV/video while driving the vehicle and may be distracted from looking ahead and cause an accident. The driver or other people could be severely injured.01GB00INE-W927HD.book Page 66 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-66.png)
![67-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESAUX Operation Screen Display During Video File PlaybackTouch the screen.The AUX operation screen is displayed.Example for AUX1, AUX2, AUX3, DVD, Game mode display•The operation screen changes to the visual screen in the AUX mode for 5 seconds after an operation has been performed. To hide the AUX operation screen, touch the video display area.Touch the display panel to display the operation screen again.•Setting the AUX name for EXT.DVD, DVD-CHG, DVB-T, and TV mode displays their individual operation switches and enables operation. Refer to “Setting the Primary AUX Name (AUX Setup)” (page 54) and “Setting the Secondary AUX Name” (page 54).Operating an External DVD PlayerTo operate an External DVD player (Optional), set “Setting the Primary AUX Name (AUX Setup)” (page 54) or “Setting the Secondary AUX Name” (page 54) to “EXT.DVD.”1Press the (SOURCE) button.2Touch [EXT.DVD] of Top banner.The display shows the EXT. DVD mode screen.When the external DVD player playback screen is displayed, you can touch the screen to display the operation screen. For details on how to operate, refer to the Owner’s Manual of the connected DVD player.External DVD player display example[ ]Touch the switch to go back to the beginning of the current chapter/track/file. Touch the switch once more to find the beginning of the previous chapter/track/file. Touch and hold to fast reverse.[ ]Touch the switch to advance to the beginning of the next chapter/track/file. Touch and hold to fast forward.[ ]Starts/Stop M.I.X. play.[ ]Starts/Stop repeat play.[ / ]Switches between play and pause.[ ]Touching during play initiates a pre stop. Touching again stops play.[Top Menu]Calls up the Top Menu screen.[Menu]Calls up the Menu screen.[Menu Control]Calls up the menu operation mode.[ ]Switches the program/playlist/folder down.[ ]Switches the program/playlist/folder up.[Angle]Switches angle.[Audio]Switches audio.[Sub Title]Switches sub titles.Change to the External DVD ModeAbout the DVD Operation ScreenTouch [<<], [>>]01GB00INE-W927HD.book Page 67 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-67.png)
![68-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Menu operation mode screen display example[Key]The menu operation mode will be displayed.[ ], [ ]Moves key panel location.[ ]Closes menu operation mode.[ ]Closes key panel.[ ], [ ], [ ], [ ]Moves menu cursor.[Enter]Determines the selected item.[Return]Returns to the previous item/screen.Operating an External DVD ChangerTo operate an External DVD changer (Optional), set “Setting the Primary AUX Name (AUX Setup)” (page 54) or “Setting the Secondary AUX Name” (page 54) to “DVD-CHG..”1Press the (SOURCE) button.2Touch [DVD-CHG.] of Top banner.The display shows the DVD-CHG. mode screen.When the External DVD changer playback screen is displayed, you can touch the screen to display the operation screen. For details on how to operate, refer to the Owner’s Manual of the connected DVD changer.•The DVD-CHG. operation mode screen and the Menu operation mode screen are the same as the external DVD player operation screen. Refer to ”Operating an External DVD Player.”External DVD changer display example 3/3 (Info mode)[Disc1]-[Disc6]Selects a Disc.Operating the Mobile Digital TV Receiver (DVB-T)To operate the Mobile Digital TV Receiver (DVB-T) (Optional), set “Setting the Primary AUX Name (AUX Setup)” (page 54) or “Setting the Secondary AUX Name” (page 54) to “DVB-T.”1Press the (SOURCE) button.2Touch [DVB-T] of Top banner.The display shows the DVB-T mode screen.Change to the External DVD Changer ModeAbout the DVD Changer Operation ScreenChanging to the Mobile Digital TV Receiver (DVB-T) ModeTouch [<<], [>>]01GB00INE-W927HD.book Page 68 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-68.png)
![69-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESWhen you touch the screen in the DVB-T mode, the operation screen is displayed. For details on how to operate, refer to the Owner’s Manual of the connected Digital TV Receiver (DVB-T).Menu operation mode screen display example[ ]Switches the Channel number/ Favorite channel number down.[ ]Switches the Channel number / Favorite channel number up.[TUNE] (Channel or FAV)Switches between the Channel mode and the Favorite channel mode.[EPG]Call up the Electronic Program Guide (EPG). [Menu]Call up the menu screen.[Menu Control]Call up the menu operation mode.[A/V]Switches the source.[Scan]Touch the switch to start the scan procedure.Operating a TVTo operate a TV Receiver (TV) (Optional), set “Setting the Primary AUX Name (AUX Setup)” (page 54) or “Setting the Secondary AUX Name” (page 54) to “TV.”1Press the (SOURCE) button.2Touch [TV] of Top banner.The display shows the TV mode screen.When the TV playback screen is displayed, you can touch the screen to display the operation screen. For details on how to operate, refer to the Owner’s Manual of the connected TV.[ ], [ ]Switches the Channel number / Preset channel / frequency down.[ ], [ ]Switches the Channel number / Preset channel / frequency up.[TUNE] (Channel or PRESET or MANUAL)Switches amongst Channel mode, Preset mode, and Manual mode. [Band]Switches the band.[A.Memo]The tuner automatically seeks and stores stations.About the DVB-T Operation ScreenChange to the TV ModeAbout the TV Operation ScreenTouch [<<], [>>]01GB00INE-W927HD.book Page 69 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-69.png)
![70-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)When an optional camera is connected, the view video of camera can be output to the monitor.Front camera or Rear camera can be connected to this unit.Depending on your camera, please choose the connection method (Direct or AUX) and camera type (Front, Rear or OTHER) first. For details, refer to “Camera Setup” (page 58).Front camera:When the HCE-C212F/HCE-C200F is connected, conditions in front of the vehicle, such as objects, people and other hazards, can be seen.Rear camera:If an HCE-C210RD/HCE-C200R/HCE-C117D/HCE-C107D/HCE-C115/HCE-C105 camera is connected, when the vehicle is reversed, the rear camera view (guide marks for vehicle width and available distance) is displayed automatically on the screen of this unit.Other camera:Set when connecting to a camera other than the Front camera or Rear camera, such as a room camera and side camera.Rear Camera OperationSet “Rear” for “Direct Camera Setting” (page 58) or “AUX Camera Setting” (page 59).1Shift the gear lever to the reverse (R) position.The rear view image is displayed while the car remains in reverse.2If you shift the gear lever to a position other than reverse (R), the monitor returns to the previous screen.•Never depend solely on the camera when backing up. Always turn and look and only use the camera for additional assistance.•This function is effective when the reverse wire is properly connected.If the camera has a view switch function, the Direct Change switch is displayed.1Touch the screen when the image from the rear camera is displayed.The operation screen is displayed on the screen.•After a 5-second time-out, the operation screen returns to the camera display screen. 2Touch [Back],[Panorama],[Corner] or [Top].The image pattern changes. [Back]: Rear View[Panorama]: Panorama View[Corner]: Corner View[Top]: Ground View•For detailed information about image patterns, see the camera Owner's Manual. 1Touch the screen when the image from the camera is displayed. The operation screen is displayed on the screen.•After a 5-second time-out, the operation screen returns to the camera display screen.2Touch [Guide OFF] on the Rear camera display screen.The guide disappears, and then the [Guide OFF] switch changes to [Guide ON].3Touch [Guide ON] to turn on the guide.1Touch the screen when the image from the camera is displayed. The operation screen is displayed on the screen.•After a 5-second time-out, the operation screen returns to the camera display screen.2Touch [Caution ].•For each touch, the caution location moves to the top or bottom of the screen. Camera Operation (Optional)You can adjust the quality of the camera image.Setting items: Live Contrast / Bright / Colour / ContrastRefer to “Visual Setting” (page 41).Displaying the Rear View Video while the Car is in ReverseSwitching the Image Pattern for the Rear CameraGuide Display ON/OFF SettingAdjusting the Caution Display Location01GB00INE-W927HD.book Page 70 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-70.png)
![72-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Error between the screen and the actual road surfaceIn the following conditions, errors are produced between the screen guidance and the actual road surface. (The illustrations represent a case when the camera is installed in the standard position.)When there is a steep upward slope behind the car (example)<Screen><Situation of the car>The distance guidance mark represents the distance to a flat road surface. Therefore in the case of an upward slope behind the car, the distance guides are displayed closer to the rear bumper than the actual distance. For example, if there is an obstacle on the upward slope, it may appear farther away than its actual position.Also, an error may occur between the guidance and the actual path of the car on the road surface.When there is a steep downward slope behind the car (example)<Screen><Situation of the car>In the case of a downward slope behind the car, the distance guides are displayed farther from the rear bumper than the actual distance. If there is an obstacle on the downward slope, it seems closer than its actual position.Also, an error may occur between the guidance and the actual path of the car on the road surface.Front Camera OperationSet “Front” for “Direct Camera Setting” (page 58). 1Press the (My Favorites) button.The Favorites screen is displayed.2Touch [Camera].The Camera mode is activated and the front view video is displayed.When the front camera (direct camera) and rear camera or side camera (AUX camera) are connected simultaneously, the screen for selecting which camera image to display appears.1Touch the screen when the image from the front camera is displayed. The operation screen is displayed on the screen.•After a 5-second time-out, the operation screen returns to the camera display screen.Distance guidance marksActual distancesError ErrorDisplaying the Front View Video ManuallySwitching the Image Pattern for the Front CameraError Error01GB00INE-W927HD.book Page 72 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-72.png)
![73-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRES2Touch [Panorama],[Corner] or [Top].The image pattern changes. [Panorama]: Panorama View[Corner]: Corner View[Top]: Ground View•For detailed information about image patterns, see the camera Owner's Manual.As with the rear camera, the front camera guide display ON/OFF setting and Caution display location can be adjusted. Refer to “Guide Display ON/OFF Setting” (page 70) and “Adjusting the Caution Display Location” (page 70) for the operations.Other Camera OperationSet “OTHER” for “AUX Camera Setting” (page 59).1Press the (My Favorites) button.The Favorites screen is displayed.2Touch [Camera].When the front camera (direct camera) and rear camera or side camera (AUX camera) are connected simultaneously, the screen for selecting which camera image to display appears.As with the rear camera, the Caution display location for other cameras can be adjusted. Refer to “Adjusting the Caution Display Location” (page 70) for the operations.About the Adjustment of Guide Display ON/OFF Setting and Adjustment of Caution Display LocationAbout the Adjustment of the Caution Display Location01GB00INE-W927HD.book Page 73 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-73.png)
![74-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)SiriusXM Tuner operation:When an optional SiriusXM Tuner is connected to this unit, the following operations may be performed.Display example for SiriusXM main screenBand displayDisplays the band of the signal currently being received.Channel nameCategory nameChannel No.Preset buttonDisplays the preset channel name or channel number.TAG IndicatorBlinks during tagging.Receiving Channels with the SiriusXM TunerAbout SiriusXM Satellite RadioEverything worth listening to is on SiriusXM, getting over 130 channels, including the most commercial-free music, plus the best sports, news, talk and entertainment. A SiriusXM Tuner and Subscription are required. For more information, visit www.siriusxm.com.•The SiriusXM Satellite Radio controls on this unit are available only when a SiriusXM Tuner is connected.1Press the (SOURCE) button.The Home screen is displayed.2Touch the [SiriusXM] of Top banner.The SiriusXM main screen display appears.•The SiriusXM source selection icon will not be listed if the SiriusXM Tuner is not connected properly. Check the tuner connections if the icon is not shown.3Touch [ ] or [ ] to select the desired channel. Touching and holding either button will rapidly browse through the channels.•Refer to the SiriusXM Tuner User Guide for details on how to install the SiriusXM Tuner.Tuning Channels by CategoryChannels are grouped into categories based on the type of content heard on the channels.1Touch [Category] on the SiriusXM main screen to activate the category browsing mode.The channels within the category of the current channel are listed.Display example of category browsing mode screenTouching the [Info] button changes the display of information for the channels in the category with the following three options.Channel NO./Channel Name Channel NO./Artist Name Channel NO./Song Title Channel NO./ Channel Name2Touch Category [ ] or [ ] on the category browsing mode screen to select a desired category.The Category Name is shown at the top of the display.3Select the desired channel number.•If no operation is performed for 10 seconds, the category browsing mode is canceled.Changing the DisplayText information, such as the channel name, artist name/feature, and song/program title, is available with SiriusXM or channel. The unit can display this text information as explained below.Touch [Info] in SiriusXM mode.Each time you touch this button, the display changes as shown below.SiriusXM Satellite Radio (Optional)Touch [<<], [>>]Channel NameCategory NameChannel No.Category NameArtist NameSong NameContent Name01GB00INE-W927HD.book Page 74 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-74.png)
![75-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESChecking the SiriusXM Radio ID NumberTo subscribe to the SiriusXM Satellite Radio service, it is necessary to locate and identify the Radio ID of your SiriusXM Tuner. The Radio ID contains 8 characters and can be found on the bottom of your SiriusXM Tuner or can be displayed on when selecting Channel 0 by following the steps below:1While receiving SiriusXM Radio, touch [ ] or [ ] to select channel “0”.The unit displays the ID number.2To cancel the ID number display, change the channel other than “0”.•The SiriusXM Radio ID does not contain the letters I, O, S, or F.Storing Channel PresetsYou can store 18 of your favorite SiriusXM channels for easy recall with Preset buttons.1Touch [Band] to select the desired band you want to store the preset in.There are 3 Satellite Radio Preset bands. Each touch of [Band] changes the band:SiriusXM-1 SiriusXM-2 SiriusXM-3 SiriusXM-12Touch and hold any one of the preset buttons for at least 2 seconds.The selected channel is stored.3Repeat the procedure to store up to 5 other channels onto the same band.To use this procedure for other bands, simply select the desired band and repeat the procedure.A total of 18 channels can be stored in the preset memory (6 channels for each band; SiriusXM-1, SiriusXM-2 and SiriusXM-3.)•If you store a new channel into a preset which already has a channel assigned, the current channel will be cleared and replaced with the new one.Tuning Channels Using Presets1Touch [Band] of Bottom banner repeatedly until the desired band is displayed.2Touch any one of the preset buttons that has a station stored to it.The preset station is received.Search Function1Touch [ (Search)] of Bottom banner.Search list screen is displayed.2Touch the desired category.The channel name search screen of the selected category is displayed.3Touch the selected channel.•You can change the category directly by touching Category [ ] or [ ] on the channel name search screen.Searching by Channel1 Touch [All Channels] after step 1.All Channels will be displayed in a list.2 Touch the selected channel.•Touch [Info] on the channel name search screen, the information of the broadcasting channels will be displayed. You can choose the desired channel from the artist name list or song name list.Each time you touch the [Info] button, the display changes as below.Channel name Artist name Song name Channel nameSearching by My Music1 Touch [My Music].The artist names and song names that you have stored and are currently playing will be displayed in a list.Displayed only when the stored song or artist is broadcasting.2 Touch the desired artist/song.The channel of the selected artist/song being broadcast is received.•Touch [Info] on the channel name search screen, the information of the broadcasting channels will be displayed. You can choose the desired channel from the artist name list or song name list.Each time you touch the [Info] button, the display changes as below.Channel name Artist name Song name Channel nameSearching by My Games1 Touch [My Games].The sport teams that you have stored and the game is currently broadcasting will be displayed in a list.Displayed only when the game of stored team is broadcasting.2 Touch the desired team.The channel of the selected game being broadcast is received.•Touch [Info] on the channel name search screen, the information of the broadcasting channels will be displayed. You can choose the desired channel from the league name list or team name list.Each time you touch the [Info] button, the display changes as below.Channel name League name Team name Channel name01GB00INE-W927HD.book Page 75 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-75.png)
![76-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Selecting the Channel DirectlyYou can directly select the channel number on the display of the numeric keypad.1Touch [Direct Channel].The numeric keypad input screen is displayed.2Touch to input the channel number.3Touch [Enter].The selected channel is received.•When a triple-digit channel number is input, it is unnecessary to touch [Enter]; the channel will be received automatically.Storing the Desired Song/ArtistWhile listening to SiriusXM Satellite Radio, you can be alerted when your favorite songs or artists are playing on other channels. An interruption ALERT will be displayed when a matching artist or song is found on another channel. For receiving interruption ALERT information, refer to “Activating the stored Alert” below.1Touch [Memo] for at least 2 seconds on the SiriusXM mode screen.The Memory type selection screen is displayed.2Touch the Store Song or Store Artist to select the store type.A “Song (Artist) Saved X Used/Y Empty” pop up screen is displayed.X is the total number of song titles, artist names or sports team stored in memory, and Y is the total number of memory song titles, artist names or sports team still available for storage.•“Artist /Song Unavailable” appears on the display if both the artist and song is not available to be stored. “Artist (Song) Unavailable” is displayed if the artist (song) is not available to be stored. “Artist (Song) Saved” is displayed if this Artist (Song) was previously stored.•If there is no memory space, “Memory Full” is displayed and then you are asked if you want to replace a stored item. If you select “OK,” then the list to stored alert items are displayed. Touch the item that you want to replace.•For details on how to set up the Games Alert, refer to “Setting the Favorite Sports Team Alerts” (page 52).Receiving and Tuning to an AlertWhenever a stored sports team, artist, or song is playing on another channel, an interruption ALERT appears on the unit display. To tune to the game, artist or song identified by the alert, follow the steps below:1When stored information is broadcast, after displaying “Song Alert”, “Artist Alert” or “Game Alert”, the screen changes to My Music list*1 or My Games list*2 display.2Touch the channel on the list you want to receive.The display changes to the selected channel and the channel is received.*1Only for Song Alert and Artist Alert.*2Only for Game Alert.•If [ ] is touched, return to the previous screen.•If no operation is performed for 10 seconds, or [ ] is touched, the screen returns to the normal mode screen.Replay FunctionIn SiriusXM mode, you can pause, rewind and replay up to 30 minutes of live Satellite Radio.1Touch [ / ] to Pause playing of the channel content.The “ (Pause)” icon and replay progress bar is displayed.2Touch [ / ] again or touch [ ] in the middle of the screen to resume playing the content.The “ (Play)” icon lights up and offset playback commences.•The time difference between the real broadcasting time and the offset playback time is displayed.3Touch [ ] to exit Instant Replay and listen to live content.•To fast reverse, touch and hold [ ] and to fast forward, touch and hold [ ].•Touching [ ] or [ ] will move a track up/down.•If you change channels while in Replay mode, the contents of the replay buffer are emptied.•Contents older than 30 minutes are automatically emptied from the replay buffer.01GB00INE-W927HD.book Page 76 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-76.png)
![77-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESParental Lock FunctionThis function can help restrict the listening of channels to children of appropriate age levels only. For information on setting the Parental Control passcode, refer to “Setting the Parental Lock” (page 53).When a locked channel is selected, “Channel Locked” is displayed and then the numeric keypad appears for you to enter the passcode.Input the 4-digit passcode you set in “Setting the Parental Lock” on page 53.The initial number is 0000.•If you input a wrong passcode, “Incorrect passcode” is displayed.•After entering the correct passcode, you can access all locked channels without entering the passcode again until the unit is powered off and then back on.Using Jump Memory and Jump Recall FunctionThe Jump Channel is a special channel that you can jump to with the press of a dedicated button and then jump back to the previous channel. This channel is often used to select your favorite SiriusXM traffic and weather report channel.1To store the Jump channel in memory, touch and hold [JUMP] for at least 2 seconds.2Touch [JUMP] to recall and tune to the saved Jump channel.•Only one channel can be stored as the jump source channel. When you want to store a new channel, the old channel will be cleared and the new one will be memorized.Storing the Tag InformationiTunes Tagging lets you tag songs heard on SiriusXM channels. Using this unit in conjunction with an optional SiriusXM Tuner and a Tagging compatible iPod/iPhone, you can tag the music that you listen to, then transfer the tag information to your iPod/iPhone, and later, when your iPod/iPhone is connected to iTunes, you can preview, buy and download your tagged songs. For details, refer to the Owner’s Manual of the Tagging compatible iPod/iPhone.When a desired song is heard on an SiriusXM channel, touch the [TAG]icon to save its tag informationIf no iPod/iPhone is connected, “Tag Count X” is displayed (X is the total amount of the tag information stored in this unit).•During tagging, the iPod/iPhone takes priority to save the tag information. If no iPod/iPhone is connected, the tag information is saved to this unit.•When the memory of iPod/iPhone is full, “iPod memory full, Tag count X” is displayed. The tag information will be stored to the unit.•If the tagging operation is interrupted by a hands-free phone call, the tagging operation will be canceled and the unit will display “Cannot Tag”.•This unit can store up to 50 pieces of tag information. When the memory of the unit is full, “Tuner memory full. Connect iPod.” may be displayed.•When the iPod/iPhone is disconnected from the unit during tagging, its tag information will be stored in the unit.•If there is stored tag information on the unit, when an iPod/iPhone supporting the tag function is connected, the stored tag information will be transferred to the iPod/iPhone automatically. When the iPod/ iPhone memory becomes full, “iPod memory full.” will be displayed, and any remaining tag information on the unit will not be transferred to the iPod/iPhone.•If tag information already exists, “Already Tagged” will be displayed when you try to tag information again.When tagging is allowed, the TAG icon is displayed.01GB00INE-W927HD.book Page 77 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-77.png)
![78-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)You can play back music files (MP3/WMA/AAC) and video files (DivX®) stored in a USB memory device on the internal player of this system.This section explains music operations only. Refer to the DivX®operation section in “DVD” (page 33) for information on video.•If the first file played is a music file, the mode will be the music play mode. If the first file played is a video file, the mode will be the video play mode. Also, the mode changes by selecting “AUDIO” or “VIDEO” in step 2 in Search Function. Refer to “Searching for a Desired Song” (page 79) and “Searching for a Desired Video File” (page 37).Display example for the USB main screen (Info mode)Audio modeVideo mode•Refer to “Display example for MP3/WMA/AAC main screen” (page 30) and “Display example for DivX® main screen” (page 33) for screen element explanations.•You can display artwork during USB playback.About creating a tag information libraryYou can scan music files in a USB memory device and create a library of tag information in this unit. Library creation starts when the USB memory device is connected. The time it takes to create the library depends on the number of files in the USB memory device, but it may take several minutes.About operations during library creation•“Tag Search” (page 79) does not work properly while a library is being created.•The order in which songs are played during library creation may differ from the order in the USB memory device.Playback1Press the (SOURCE) button.2Touch [USB] of Top banner.The USB mode is activated and the display changes to the USB screen.3Touch [ ] or [ ] or to select the desired track (file).Returning to the beginning of the current track (file):Touch [ ].Fast reverse :Touch and hold [ ].Advancing to the beginning of the next track (file) :Touch [ ].Fast forward :Touch and hold [ ].4To pause playback, touch [/].[ ] is displayed in the middle of the screen.Touch [ / ] again or touch [ ] in the middle of the screen to start playback.•Any file protected by DRM (Digital Rights Management) copy protection, cannot be played back on this unit.•The playback time may not be correctly displayed when a VBR (Variable Bit Rate) recorded file is played back.•If there is tag information, artist name/album name/track name is displayed.•ID3 tag/WMA tagIf an MP3/WMA/AAC file contains ID3 tag/WMA tag information, the ID3 tag/WMA tag information is displayed (e.g., song name, artist name, and album name).•If the combined number of files/folders in the USB memory devices reaches 10,000, the message “The system has reached its limit of recognizable files/folders from the USB device.” will be displayed. To delete the message, remove the USB memory devices.Repeat PlayOperation differs depending on whether the most recent song search was a Tag Search or a Folder/File Search.Touch [ ] during playback.The repeat mode switches every time the button is touched.Folder/File Search mode:Tag Search mode:*Only files in a folder are repeatedly played back.•If the Repeat Play mode is activated during M.I.X. playback, the M.I.X. mode will be canceled.USB Memory (Optional)Touch [<<], [>>]Repeat Repeat Folder*(OFF) RepeatRepeat (OFF) Repeat01GB00INE-W927HD.book Page 78 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-78.png)
![79-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESRandom Play (M.I.X.)Operation differs depending on whether the most recent song search was a Tag Search or a Folder Search.Touch [ ] during playback.The tracks (files) on the disc will be played back in a random sequence.To cancel M.I.X. play, touch [ ].Folder Search mode:Tag Search mode:*1 Only files in a folder are played back in random sequence.*2M.I.X. Songs randomly plays back songs within a selected category (playlist, album, etc.). The songs within the category are played just once until all songs have been played.•If the M.I.X. mode is activated during Repeat playback, the Repeat Play mode will be canceled.•If you select a track by using the search mode, the M.I.X. play mode will be canceled.Random Play (M.I.X. ALL)This operation is available only if the most recent song search was a Tag Search.1Touch [ (Search)] of Bottom banner during playback.The search mode is activated.2Touch [Music].The category name list screen is displayed.3Touch [Shuffle All] during playback.The tracks (files) on the disc will be played back in a random sequence.To cancel M.I.X. play, touch [ ].•All songs in the USB memory are played back in random sequence. Any one song does not play back again until all songs have been played back.Searching for a Desired SongINE-W927HD can carry out 2 kinds of searches.1Touch [ (Search)] of Bottom banner during playback.2Touch [Music].The search mode is activated.3Touch [Folders].The folder name list screen is displayed.Folder Name Search Mode4Touch [ ] of the desired folder.The first file in the selected folder is played back.File Name Search Mode4Touch the desired folder name.The file name of the selected folder is displayed. 5Touch the desired file name.The selected file is played back.•To return to the previous hierarchy, touch [ ].•For details on how to scroll through the list, refer to “Selecting an Item in a List” (page 26).•After selecting a folder via a Folder name search, touch [ ] on the main screen to display the folder search screen.•After selecting a file via a File name search, touch [ ] on the main screen to display the file search screen.By using file tag information and keeping these songs organized in playlists, this unit’s search functions will ease song searches in large libraries.Each music category has its own individual hierarchy. Use the Playlists/Artists/Albums/Songs/Genres/Composers search mode to narrow searches based on the table below.For example: Searching by Artist nameThe following example explains how an ARTISTS search is performed. Another search mode can be used for the same operation, although the hierarchy differs.Searching by artist name1Touch [ (Search)] of Bottom banner during playback.2Touch [Music].The search mode screen appears.3Touch [Artists].The Artists search screen is displayed.4Select the desired artist.To Play Back the Artist Directly1 Touch [ ] of the artist’s name.All songs of the selected artist are played back.To Search for the Album of the Artist1 Touch the selected artist name.The Albums search screen of the selected artist is displayed.2 Touch [ ] of the desired album’s name.All songs of the selected album are played back.M.I.X. Folder*1(OFF) M.I.X. Folder*1M.I.X. Songs*2(OFF) M.I.X. Songs*2File/Folder Name SearchTag SearchHierarchy 1 Hierarchy 2 Hierarchy 3 Hierarchy 4Playlists Songs — —Artists Albums Songs —Albums Songs — —Songs — — —Genres Artists Albums SongsComposers Albums Songs —01GB00INE-W927HD.book Page 79 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-79.png)
![80-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)To Search for a Song in the Album of the Artist1 Touch the desired artist’s name.All albums of the selected artist are displayed.5Touch the desired album’s name.All songs of the selected album are displayed.6Touch the desired song’s name.The selected song is played back.•For details on how to scroll through the list, refer to “Selecting an Item in a List” (page 26).•After selecting a file via a Tag search, touch [ ] on the main screen to display the search screen. The hierarchy level you selected last in the search mode is displayed.Direct Up/Down FunctionThis operation is available only if the most recent song search was a Tag Search.Playlist/Artist/Album/Genre/Composer can be easily changed.For example, if you listen to a song from a selected album, the album can be changed.Touch [ ] or [ ] to select the desired Playlist/Artist/Album/Genre/Composer.•If an album is selected from an artist search, the album can be searched.•For details on icon display, refer to “Direct Up/Down switch icon:” (page 83).•If search selection mode is not activated, Direct Up/Down Function is not possible.•During M.I.X. playback, this operation is not possible.Select the Desired Folder (Folder up/down)This operation is available only if the most recent song search was a Folder/File Search.If you listen to a file from a selected folder, the folder can be changed.Touch [ ] or [ ] to select the folder.•During M.I.X. ALL playback, this operation is not possible.01GB00INE-W927HD.book Page 80 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-80.png)
![82-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Playback1Press the (SOURCE) button.2Touch [iPod (Audio or Video)] of Top banner.The display shows the iPod mode screen.3Touch [ ] or [ ] or to select the desired track (file).Returning to the beginning of the current track (file):Touch [ ].Fast reverse :Touch and hold [ ].Advancing to the beginning of the next track (file) :Touch [ ].Fast forward :Touch and hold [ ].4To pause playback, touch [/].•If a song is playing on the iPod/iPhone when it is connected to the INE-W927HD, it will continue playing after the connection.•An episode may have several chapters. The chapter can be changed by touching [ ] or [ ].•If the artist, album or song name, created in iTunes, has too many characters, songs may not be played back when connected to the INE-W927HD. Therefore, a maximum of 64 characters is recommended. The maximum number of characters for the unit is 64.•Some characters may not be correctly displayed. Searching for a Music FileAn iPod/iPhone can contain thousands of songs. For this reason, this unit can make various searches using the search function as shown below.Using the Playlist/Artist/Album/Podcast/Audiobook/Genre/Composer/ Song search mode’s individual hierarchy, you can narrow down your search as shown in the table below.<MUSIC Search Menu>For example: Searching by Artist nameThe following example explains how an ARTISTS search is performed. Another search mode can be used for the same operation, although the hierarchy differs.Searching by artist name1Touch [ (Search)] of Bottom banner during playback.2Touch [Music].The search mode screen appears.3Touch [Artists].The Artists search screen is displayed.4Select the desired artist.To Play Back the Artist Directly1 Touch [ ] of the artist’s name.All songs of the selected artist are played back.To Search for the Album of the Artist1 Touch the selected artist name.The Albums search screen of the selected artist is displayed.2 Touch [ ] of the desired album’s name.All songs of the selected album are played back.To Search for a Song in the Album of the Artist1 Touch the desired artist’s name.All albums of the selected artist are displayed.5Touch the desired album’s name.All songs of the selected album are displayed.6Touch the desired song’s name.The selected song is played back.•Touching [ ] of “ALL” will play back all songs in the list.•Touching “ALL” will display the search list in the next hierarchy.•An alphabet skip function is available. Refer to “Alphabet Skip Function” (page 83).•For details on how to scroll through the list, refer to “Selecting an Item in a List” (page 26).Searching for a Desired Video FileYou can select a movie, music video, etc., from the list screen.•Video search mode depends on the iPod/iPhone. If the specification of the iPod/iPhone is changed, the search mode on this unit will also be changed.Examples for the video search mode•Video Playlists•Movies•Music Videos, etc.For example: Searching by MovieThe following example explains how a Movie search is performed. Another search mode can be used for the same operation, although the hierarchy differs.1Touch [ (Search)] of Bottom banner during playback.2Touch [Video].The Video search mode screen appears.3Touch [Movies].The Movies search screen is displayed.4Touch the desired movie.The selected movie is played back.•For details on how to scroll through the list, refer to “Selecting an Item in a List” (page 26).Hierarchy 1 Hierarchy 2 Hierarchy 3 Hierarchy 4Playlists Songs — —Artists Albums Songs —Albums Songs — —Songs — — —Podcasts Episodes — —Genres Artists Albums SongsComposers Albums Songs —Audiobooks — — —01GB00INE-W927HD.book Page 82 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-82.png)
![83-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESAlphabet Skip Function The unit is provided with a alphabet skip function for effective searching. When you use this function in the search mode, you can quickly search an artist or a song, etc. Alphabet skip function:The alphabet skip function is skipped to the next alphabet such as from A to B, B to C by touching [ALPHABET ]. You can also skip in reverse order such as from B to A by touching [ ALPHABET].Direct Up/Down FunctionIf you touch [ ] of the album name in the search mode, this album will be played back repeatedly. To go to the previous or next Album, use the Direct Up/Down Function.Touch [ ] or [ ] to select the desired Playlist/Artist/Album/Genre/Podcast/Composer.Direct Up/Down switch icon:•You can use the Direct Up/Down Function during video file playback. The Direct Up/Down Function switches in the video mode are [ ] [ ].•If you are searching for a song, this operation cannot be performed.•If an album is selected from an artist search, the album can be searched.•During shuffle playback, this operation is not possible.Search Position Memory During iPod/iPhone playback, you can quickly move back up the selected hierarchy, a level at time.Touch [ ]. (ex. [ Playlists])The hierarchy level you selected last in the search mode is displayed. Repeated touches return to each previous level up to the highest.Repeat PlayTouch [ ] to repeatedly play back the currently track.The tracks (files) will be played repeatedly.Touch [ ] again to deactivate Repeat play.Random Play (Shuffle)Touch [ ] during playback.The files will be played back in a random sequence.The Shuffle mode switches every time [ ] is touched.Shuffle Albums: The songs on each album are played back in proper order. Upon completing of all the songs on the album, the next album is selected randomly. This continues until all albums have been played.Shuffle Songs: Song shuffle randomly plays back songs within a selected category (playlist, album, etc.). The songs within the category are played just once until all songs have been played.•For details on the search mode, refer to “Searching for a Music File” (page 82).Random Play (Shuffle All)All files in the iPod are played back in random sequence.1Touch [ (Search)] of Bottom banner during playback.2Touch [Music].The search mode screen appears.3Touch [Shuffle All] of Bottom banner during playback.The indicator “ ” lights, and the songs will be played back in random sequence.•To cancel, set the Shuffle mode to Off. Refer to “Random Play (Shuffle)” (page 83).PlaylistArtistAlbumPodcastGenreComposerDirect Up/Down switch iconRepeat (OFF) RepeatShuffle Songs Shuffle Albums (OFF) Shuffle Songs01GB00INE-W927HD.book Page 83 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-83.png)
![84-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Pandora® internet radio is your own FREE personalized radio now available to stream music on your iPhone and smartphone (which runs Android OS or BlackBerry OS).Just start with the name of one of your favorite artists, songs or classical composers and Pandora® will create a “station” that plays their music and more music like it.The INE-W927HD enables you to interact with your Pandora® account by connecting an iPhone and smartphone that has the latest version of the Pandora® application installed.Display example for iPhone Pandora Radio screenDisplay example for BLUETOOTH Pandora Radio screenStation nameSong NameArtist NameAlbum NameTrack/Artist bookmark iconElapsed timeRemaining time for playingArtwork displayListening to Pandora®1Launch the Pandora Application on the iPhone.2Press the (SOURCE) button.3Touch [PANDORA®] of Top banner.The display changes to PANDORA mode screen.4To skip to the next song, touch [ ].•The operation to replay a previous song is not available.•Pandora limits the number of skips allowed on their service. If you attempt to skip songs beyond the limit, “No skips remaining” is displayed.•INE-W927HD remembers the source just before turning off the power.Even if you reconnect an iPhone without launching Pandora Application while the power is off, Pandora mode (not iPod mode) is displayed when power is turned back on.•Depending on the signal status, song may be stopped during playback.When the advertisement is received, the playback time will be frozen and key operation is invalid.•The playback time may not be correctly displayed.When using BLUETOOTH Pandora®, it is necessary to register the connected BLUETOOTH compatible smartphone (which runs Android OS or BlackBerry OS) as BLUETOOTH Audio. For details, refer to “Registering the BLUETOOTH Device” (page 55).Also, make sure the BLUETOOTH Pandora® setting is set to “On” (page 54).1Pair the smartphone with this unit.2Launch the Pandora® on the smartphone.3Press the (SOURCE) button.4Touch [PANDORA®(BLUETOOTH)] of Top banner.The display changes to BLUETOOTH Pandora mode screen. The playback screen appears.5To skip to the next song, touch [ ].•If pairing is not registered for the Bluetooth audio device, the message “No BLUETOOTH device connected. Please check “BLUETOOTH settings.” appears on the screen. Change the audio device settings as per “Registering the BLUETOOTH Device” (page 55).•The operation to replay a previous song is not available.•Pandora® limits the number of skips allowed on their service. If you attempt to skip songs beyond the limit, “No skips remaining.” is displayed.•INE-W927HD remembers the source just before turning off the power. If Pandora® is the last SOURCE to be played, it will appear as the SOURCE the next time the unit is power up even if the app is not launched on your smartphone.•The display content varies when ads are received.•The playback time may not be correctly displayed.Pandora® internet radio (optional)Touch [<<], [>>]iPhone Pandora®BLUETOOTH Pandora®01GB00INE-W927HD.book Page 84 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-84.png)
![85-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRES“Thumbs” FeedbackYou can personalize your stations with “Thumbs Up” or “Thumbs Down” feedback, which the system takes into account for future music selections.During playback, touch [ ] for thumbs up, or touch [ ] for thumbs down.:The “ ” indicator appears in the display. Pandora® will add similar music to your station.:The “ ” indicator is displayed. Pandora® will ban that song from your station, and the current song is skipped. If the number of skips allowed has reached its limit, the current song continues to play back.•In some situations, “Thumbs” feedback may not be available. “Unable to save your thumb rating.” will be displayed.Searching for a Desired StationYou can display your station list and select stations directly from the INE-W927HD.Alphabet Search1Touch [ (Search)] of Bottom banner to activate the Search mode.2Touch [By A-Z].The “By A-Z” search mode is activated and the station names are listed alphabetically.3Touch the desired station.Pandora will play that station.Search by Date Added1Touch [ (Search)] of Bottom banner to activate the Search mode.2Touch [By Date].The “By Date” search mode is activated and the station names are listed by the date they were added to the account.3Touch the desired station.Pandora will play that station.Creating a New StationBasing on the currently playing song or artist, a personalized Pandora station can be created. The new station will play more music like it.Freeword1During playback, touch [Create New Station].The Key Pad screen is displayed. You can enter a keyword and search for Artist/Song.2Enter a keyword and press the OK button.Artist/TrackDuring playback, touch [Create Station From (Artist/Track)] of Bottom banner.•The created station is saved to your station list.•You can also create stations using the Pandora Application on your iPhone or on the web at www.pandora.com.•In some situations, creating a new station may not be available. “Unable to create station.” will be displayed.QuickMixUse QuickMix to create a playlist based on two or more of your Pandora stations. Edit your QuickMix station selections on the Pandora Compatible Application for iPhone when it is not connected to the INE-W927HD.1Touch [ (Search)] of Bottom banner to activate the Search mode.2Touch [By A-Z] or [By Date].The “By A-Z” or “By Date” search mode is activated and the station name is displayed.3Touch [Quick Mix].•The indicator lights, and the songs from the created stations are played back in random sequence.01GB00INE-W927HD.book Page 85 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-85.png)
![86-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Bookmarking a Desired Track or ArtistThe currently playing song or artist can be bookmarked and saved to your Pandora account.1During playback, touch [Artwork display].The type selection telop is displayed.2Touch [Track] or [Artist].The current track or artist is bookmarked. “ ” icon or “ ” icon is displayed.•Your bookmarks can be viewed on your “Profile” page at www.pandora.com.•In some situations, bookmarks may not be available. “Unable to save your bookmark.” will be displayed.Artwork display01GB00INE-W927HD.book Page 86 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-86.png)
![91-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESIn Case of DifficultyBasicNo function or display.• Vehicle’s ignition is off.- If connected according to the instructions, the unit will not operate with the vehicle’s ignition off.• Improper power lead connections.- Check power lead connections.• Blown fuse.- Check the fuse on the battery lead of the unit; replace with the proper value if necessary.• Internal micro-computer malfunctioned due to interference noise, etc.- Press the RESET switch with a ballpoint pen or other pointed article.No sound or unnatural sound.• Incorrect setting of volume/balance/fader controls.- Readjust the controls.• Connections are not properly or securely made.- Check the connections and firmly connect.Screen not displayed.• Brightness/Contrast control is set at the minimum position.- Adjust the Brightness/Contrast control.• Temperature in the vehicle is too low.- Increase the vehicle’s interior temperature to operation temperature range.• Connections to the DVD are not securely made.- Check the connections and firmly connect.• The Parking Brake Lead is not connected.• The Parking Brake is not engaged.- Connect the Parking Brake Lead, then engage the Parking Brake. (See pages 101, 107)Movement of displayed picture is abnormal.• Temperature in the vehicle is too high.- Allow the vehicle’s interior temperature to cool.The optional remote control is inoperative.• The remote control sensor setting of “Remote Sensor Setting” (page 40) is not set to this unit (“Front”).- Set for “Front.”RadioUnable to receive stations.• No antenna, or open connection in the antenna cable.- Make sure the antenna is properly connected; replace the antenna or cable if necessary.Unable to tune stations in the seek mode.• You are in a weak signal area.- Make sure the tuner is in DX mode.• If the area you are in is a primary signal area, the antenna may not be grounded and connected properly.- Check your antenna connections; make sure the antenna is properly grounded at its mounting location.• The antenna may not be the proper length.- Make sure the antenna is fully extended; if broken, replace the antenna with a new one.Broadcast is noisy.• The antenna is not the proper length.- Extend the antenna fully; replace it if it is broken.• The antenna is poorly grounded.-Make sure the antenna is grounded properly at its mounting location.• The station signal is weak and noisy.- If above solution does not work, tune in another station.DiscDisc playback sound is wavering.• Moisture condensation in the disc Module.- Allow enough time for the condensation to evaporate (about 1 hour).Disc insertion not possible.• A disc is already in this unit.- Eject the disc and remove it.• The disc is being improperly inserted.- Insert the disc correctly. (See page 19)Unable to fast forward or backward the disc.• The disc has been damaged.- Eject the disc and discard it; using a damaged disc in your unit can cause damage to the mechanism.Disc playback sound skips due to vibration.• Improper mounting of the unit.- Securely re-mount the unit.• Disc is very dirty.- Clean the disc.• Disc has scratches.- Change the disc.• The pick-up lens is dirty.- Do not use a commercially available lens cleaner disc. Consult your nearest Alpine dealer.Disc playback sound skips without vibration.• Dirty or scratched disc.- Clean the disc; a damaged disc should be replaced.CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW playback not possible.• Close session (finalization) has not been performed.- Perform finalization and attempt playback again.Error displays.• Mechanical error.- Touch [ Disc] on the Open/Tilt screen. After the error indication disappears, insert the disc again. If the above-mentioned solution does not solve the problem, consult your nearest Alpine dealer.MP3/WMA/AAC is not played back.• Writing error occurred. The CD format is not compatible.- Make sure the CD has been written in a supported format. Refer to “About MP3/WMA/AAC” (pages 31 to 32), then rewrite in the format supported by this device.If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected, or then consult your authorized Alpine dealer.01GB00INE-W927HD.book Page 91 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-91.png)
![92-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)Unit does not operate.• Condensation.- Wait a while (about 1 hour) for the condensation to dry.Playback does not start.• Disc is loaded upside-down.- Check the disc and load it with the labeled side facing upward.• Disc is dirty.- Clean the disc.• A disc not able to play back with this unit is loaded.- Check if the disc is able to be played back.• Parental lock is set.- Cancel the parental lock or change the rating level.Picture is unclear or noisy.• Disc is being fast-forwarded or fast-reversed.- The picture may be slightly disturbed, but this is normal.• Vehicle’s battery power is weak.- Check the battery power and wiring.(The unit may malfunction if the battery power is under 11 volts with a load applied.)Image stops sometimes.• Disc is scratched.- Replaced with a non-scratched disc.If this Message AppearsVarious messages are displayed on the screen during operation. In addition to the messages telling you the current status or providing guidance for the next operation, there are also the following error messages. If one of these error messages is displayed, carefully follow the instructions in the solution column.SystemIf you are driving, please pull over before using this function.• A setup operation, etc., was carried out while the vehicle was running.- Move the vehicle to a safe location, stop, and engage the parking brake, then carry out this operation.USB current error.• Abnormal current is run to the USB connector device.- Turn the ignition key off, and then set to ON again.- Attempt to connect another iPod/iPhone/USB memory device.Unable to access the DVD drive.The system will reset.• An access error to DVD drive occurred for some reasons.- The unit is rebooted automatically.Unable to access the DVD drive.Please inquire details from the service center.• An access error to DVD drive occurred for some reasons.- Please ask Service Center for help.Audio/VisualRead error.Please check the Disc.• Scratched disc, contaminated disc/poor recording/disc incompatible with this unit.- Touch [ Disc] on the Open/Tilt screen.- Change the disc.USB device error.• An iPod/iPhone that is not supported by the unit is connected.- Connect an iPod/iPhone that is supported by the unit.- Reset the iPod.• A USB device that is not supported by the unit is connected.- Attempt to connect another USB memory device.• Communication error.- Turn the ignition key off, and then set to ON again.- Check the display by reconnecting between the iPod/iPhone and the unit, using the iPod/iPhone cable.- Check the display by reconnecting between the USB memory device and the unit.• Caused by the iPod/iPhone Software Version not being compatible with this unit.- Update the iPod/iPhone Software Version to be compatible with this unit.• The iPod/iPhone is not verified.- Change another iPod/iPhone.Region Code Violation.• Disc does not match regional code number.- Load a disc that matches the regional code number.No data.• There are no data in the iPod/iPhone.- Download data to the iPod/iPhone and connect to the INE-W927HD.• There are no data in the USB memory.- Download data to the USB memory and connect to this unit.Un-readable song was skipped.• A copy-protected WMA file has been detected.- You can only play back non-copy-protected files.• A sampling rate/bit rate not supported by the unit is used.- Use a sampling rate/bit rate supported by the unit.BLUETOOTHPlease check BLUETOOTH audio device.• The BLUETOOTH audio device was not connected correctly.- Check the settings for INE-W927HD and the BLUETOOTH audio device and reconnect.Please check mobile device.• The mobile phone was not connected correctly. - Check the settings for INE-W927HD and the mobile phone and reconnect.01GB00INE-W927HD.book Page 92 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-92.png)
![93-EN01GB06INE-W927HD.fmALPINE INE-S927HD 68-21057Z90-A (EN)ENFRESUnable to download phonebook.• Phonebook failed to read due to mobile phone disconnection, etc. - Check the mobile phone connection, and then conduct synchronizing and adding again. (See page 63)• The connected mobile phone does not support synchronizing of its phone book.- Connect the mobile phone that supports synchronizing the phone book, then synchronize again. (See page 63)NavigationThe vehicle’s position is erroneous.• The GPS reception is poor.- Drive the vehicle in an area of good GPS reception to allow the unit to recalibrate itself. Move to a location where strong GPS reception is possible.No operation• Moisture condensation- Allow enough time for the condensation to evaporate (about 1 hour).• Ambient Temperature- Make sure the temperature inside the vehicle is between 0°C and 45°C (32°F and 113°F).Playing back a DRM protected DivX FileSome operations cannot be performed while displaying the following message.Authorization Error.This player is not authorized to play this video.• The version of the DRM protected DivX® File is not supported by this unit.- Play the supported DivX® File.Rental Expired.• The file being attempted to play has a limited number of viewings. The viewing limit has been reached and can no longer be played on this device. After the message has been displayed, the beginning of the next file will automatically be played back.This DivX rental has used XX out of YY views.Continue?• If the total number of viewings for this file has not been exceeded, the views remaining is displayed.- To play back, select [OK]. If the next file is to be played back, select [Cancel].Do you wish to stop playing rental file?• While playing back a rental file, “Do you wish to stop playing rental file?” is displayed when the following operations are performed. Selecting [OK], reduces the number of views by 1.• Folder Up/Down• STOP• Search operation• Move to the first/last DivX® file by Chapter Up/Down- To interrupt the playback, touch [OK], or touch [Cancel] to not interrupt.Audio format not supported.• The file being played is a DivX® file with an unsupported audio format, so only the video data is played.- Play a DivX® file with a supported audio format.Video frame rate not supported.• The file being played is a DivX® file with an unsupported frame rate.- Play a DivX® file with a supported frame rate.Video resolution not supported.• The file being played is a DivX® file with an unsupported resolution.- Play a DivX® file with a supported resolution.SiriusXMCheck Tuner• The SiriusXM Tuner is disconnected or the unit is having trouble communicating with the Tuner.- Connect the Tuner or check the Tuner connection to the back of the unit.Check Antenna• The SiriusXM Satellite Radio antenna or cable is either damaged or not connected correctly to the SiriusXM Tuner.- Check that the SiriusXM antenna cable is connected to the SiriusXM Tuner and check that the antenna cable is not kinked or otherwise damaged. Replace the antenna if necessary.No Signal• The SiriusXM satellite signal is too weak at the current location.- Move the vehicle to a location with a clear view of the southern sky.- Make sure the Satellite Radio antenna is properly mounted and not obstructed by metal objects.Channel Not Subscribed Call SiriusXM to Subscribe• The active channel has become unsubscribed or the requested channel is not available in your subscription package.- Visit www.siriusxm.com for information on subscribing to this channel.•The unit will revert to the previous selected channel or to channel 1 automatically.Channel Not Available• The active channel is no longer in the SiriusXM channel lineup or the user has entered an invalid channel number.- Visit www.siriusxm.com for information on the current channel lineup.•The unit will revert to the previous channel or to channel 1 automatically.Subscription Updated Press Any key to Continue• Your subscription has been updated.- Press any button to clear this message.Channel Locked• A locked channel is selected.- Input the passcode on the number keypad screen, refer to “Parental Lock Function” (page 77). If wrong passcode is input, “Incorrect Lock Code” will be displayed and the unit will revert to the previous channel.01GB00INE-W927HD.book Page 93 Thursday, August 9, 2012 5:47 PM](https://usermanual.wiki/ALPS-ALPINE/9ZUA140.User-manual-G500-7/User-Guide-1837950-Page-93.png)
