ALPS ALPINE 9ZUA155 CAR AUDIO User Manual CDE 175BT

Download:
Mirror Download [FCC.gov]
Document ID	3743457
Application ID	81dUCaQ6/JOgR90xQGeS4Q==
Document Description	05 Short-Term Confidential_User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	164.66kB (2058196 bits)
Date Submitted	2018-02-07 00:00:00
Date Available	2018-08-06 00:00:00
Creation Date	2017-12-08 09:49:15
Producing Software	Acrobat Distiller 10.1.16 (Windows)
Document Lastmod	2018-01-16 11:29:28
Document Title	CDE-175BT
Document Creator	Adobe InDesign CS5.5 (7.5.3)
Document Author:	ALPINE Corporation

CD/USB RECEIVER WITH ADVANCED BLUETOOTH
CDE-175BT
EN
FR
ES
• OWNER’S MANUAL
Please read before using this equipment.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
• MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
Thank you for purchasing this Alpine product. Please take a moment to protect your purchase by
registering your product now at the following address: www.alpine-usa.com/registration.
You will be informed of product and software updates (if applicable), special promotions, news about
Alpine, and entered for a chance to win prizes.
Merci d’avoir acheté ce produit Alpine. Nous vous invitons à consacrer un moment à la protection de
votre achat en enregistrant votre produit dès maintenant à l’adresse suivante :
www.alpine-usa.com/registration.
Vous serez tenu informé des mises à jour des produits et des logiciels (le cas échéant), des promotions
spéciales, de l’actualité d’Alpine, et vous aurez une chance de remporter des prix.
Gracias por adquirir este producto Alpine. Con solo unos pocos pasos podrá proteger su producto,
registrándolo a través de la siguiente dirección: www.alpine-usa.com/registration.
Recibirá información sobre nuevos productos y software, promociones especiales, novedades sobre
Alpine y participará en el sorteo de premios.
Printed in Thailand
68-40368Z01-C (Y-D)
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE CDE-175BT 68-40368Z01-C (EN/FR/ES) 128x182
For safety, be sure to install this unit in the
dashboard of the car as the rear side of the
unit becomes hot during use.
For details, see “Connection/Installation”
(page 38).
The nameplate indicating operating voltage, etc.,
is located on the bottom of the chassis.
CAUTION
The use of optical instruments with this product
will increase eye hazard.
Warning if your car’s ignition has no ACC
position
Be sure to set the AUTO OFF function (page
24). The unit will shut off completely and
automatically in the set time after the unit is
turned off, which prevents battery drain. If
you do not set the AUTO OFF function, press
and hold (Power) until the display
disappears each time you turn the ignition off.
Disclaimer regarding services offered by
third parties
Services offered by third parties may be
changed, suspended, or terminated without
prior notice. Alpine does not bear any
responsibility in these sorts of situations.
2-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
Important notice
• We do not take any responsibility for the
leakage of information during BLUETOOTH
communication.
Caution
IN NO EVENT SHALL ALPINE BE LIABLE FOR ANY
INCIDENTAL, INDIRECT OR CONSEQUENTIAL
DAMAGES OR OTHER DAMAGES INCLUDING,
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS
OF REVENUE, LOSS OF DATA, LOSS OF USE OF
THE PRODUCT OR ANY ASSOCIATED EQUIPMENT,
DOWNTIME, AND PURCHASER’S TIME RELATED
TO OR ARISING OUT OF THE USE OF THIS
PRODUCT, ITS HARDWARE AND/OR ITS
SOFTWARE.
If you have any questions or problems
concerning your unit that are not covered in this
manual, consult your nearest Alpine dealer.
EN
FR
ES
Dear customer, this product includes a radio
transmitter.
Please check your vehicle operation manual or
contact the manufacturer of your vehicle or your
vehicle dealer, before you install this product into
your vehicle.
Emergency calls
This BLUETOOTH car handsfree and the
electronic device connected to the handsfree
operate using radio signals, cellular, and landline
networks as well as user-programmed function,
which cannot guarantee connection under all
conditions.
Therefore do not rely solely upon any electronic
device for essential communications (such as
medical emergencies).
On BLUETOOTH communication
• Microwaves emitting from a BLUETOOTH
device may affect the operation of electronic
medical devices. Turn off this unit and other
BLUETOOTH devices in the following locations,
as it may cause an accident.
– where inflammable gas is present, in a
hospital, train, airplane, or petrol station
– near automatic doors or a fire alarm
• This unit supports security capabilities that
comply with the BLUETOOTH standard to
provide a secure connection when the
BLUETOOTH wireless technology is used, but
security may not be enough depending on the
setting. Be careful when communicating using
BLUETOOTH wireless technology.
3-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
WARNING
WARNING
This symbol means important instructions.
Failure to heed them can result in serious
injury or death.
DO NOT OPERATE ANY FUNCTION THAT
TAKES YOUR ATTENTION AWAY FROM
SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged
attention should only be performed after
coming to a complete stop. Always stop the
vehicle in a safe location before performing
these functions. Failure to do so may result in
an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU
CAN STILL HEAR OUTSIDE NOISES WHILE
DRIVING.
Excessive volume levels that obscure sounds
such as emergency vehicle sirens or road
warning signals (train crossings, etc.) can be
dangerous and may result in an accident.
LISTENING AT LOUD VOLUME LEVELS IN A CAR
MAY ALSO CAUSE HEARING DAMAGE.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or
electric shock.
USE ONLY IN CARS WITH A 12 VOLT
NEGATIVE GROUND.
(Check with your dealer if you are not sure.)
Failure to do so may result in fire, etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES
OUT OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If
swallowed, consult a physician immediately.
USE THE CORRECT AMPERE RATING WHEN
REPLACING FUSES.
Failure to do so may result in fire or electric
shock.
4-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
DO NOT BLOCK VENTS OR RADIATOR
PANELS.
Doing so may cause heat to build up inside
and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V
APPLICATIONS.
Use for other than its designed application may
result in fire, electric shock or other injury.
DO NOT PLACE HANDS, FINGERS OR
FOREIGN OBJECTS IN INSERTION SLOTS OR
GAPS.
Doing so may result in personal injury or
damage to the product.
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may
result in fire or product damage.
BEFORE WIRING, DISCONNECT THE CABLE
FROM THE NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or
injury due to electrical shorts.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply
power to other equipment. Doing so will
exceed the current carrying capacity of the
wire and result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN
DRILLING HOLES.
When drilling holes in the chassis for
installation, take precautions so as not to
contact, damage or obstruct pipes, fuel lines,
tanks or electrical wiring. Failure to take such
precautions may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE
OR STEERING SYSTEMS TO MAKE GROUND
CONNECTIONS.
Bolts or nuts used for the brake or steering
systems (or any other safety-related system), or
tanks should NEVER be used for installations or
ground connections. Using such parts could
disable control of the vehicle and cause fire etc.
DO NOT INSTALL IN LOCATIONS WHICH
MIGHT HINDER VEHICLE OPERATION, SUCH
AS THE STEERING WHEEL OR GEARSHIFT.
Doing so may obstruct forward vision or
hamper movement etc. and results in serious
accident.
DO NOT INSTALL IN LOCATIONS WITH HIGH
MOISTURE OR DUST.
Avoid installing the unit in locations with high
incidence of moisture or dust. Moisture or dust
that penetrates into this unit may result in
product failure.
EN
CAUTION
FR
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
ES
HALT USE IMMEDIATELY IF A PROBLEM
APPEARS.
Failure to do so may cause personal injury or
damage to the product. Return it to your
authorized Alpine dealer or the nearest Alpine
Service Center for repairing.
HAVE THE WIRING AND INSTALLATION
DONE BY EXPERTS.
The wiring and installation of this unit requires
special technical skill and experience. To ensure
safety, always contact the dealer where you
purchased this product to have the work done.
USE SPECIFIED ACCESSORY PARTS AND
INSTALL THEM SECURELY.
Be sure to use only the specified accessory
parts. Use of other than designated parts may
damage this unit internally or may not securely
install the unit in place. This may cause parts to
become loose resulting in hazards or product
failure.
ARRANGE THE WIRING SO IT IS NOT
CRIMPED OR PINCHED BY A SHARP METAL
EDGE.
Route the cables and wiring away from moving
parts (like the seat rails) or sharp or pointed
edges. This will prevent crimping and damage
to the wiring. If wiring passes through a hole in
metal, use a rubber grommet to prevent the
wire’s insulation from being cut by the metal
edge of the hole.
5-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
Table of Contents
WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . . 7
Getting Started
Detaching the Front Panel . . . . . . . . . . . . . . . . . . . . 10
Resetting the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Preparing a BLUETOOTH Device (CDE-175BT/
CDE-172BT/ UTE-73BT only) . . . . . . . . . . . . . . . . . 11
Connecting a USB Device . . . . . . . . . . . . . . . . . . . . . 13
Connecting Other Portable Audio Device . . . . . 13
Listening to the Radio
Listening to the Radio . . . . . . . . . . . . . . . . . . . . . . . . 14
Using Radio Data System (RDS) . . . . . . . . . . . . . . . 14
Listening to the SiriusXM Radio (CDE-175BT/
CDE-172BT only) . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Playback
Playing a Disc (CDE-175BT/ CDE-172BT/
CDE-170 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Playing a USB Device . . . . . . . . . . . . . . . . . . . . . . . . . 16
Playing a BLUETOOTH Device (CDE-175BT/
CDE-172BT/ UTE-73BT only) . . . . . . . . . . . . . . . . . 17
Searching and Playing Tracks . . . . . . . . . . . . . . . . . 18
Listening to Pandora® (CDE-175BT/
CDE-172BT/ UTE-73BT only)
Setting up Pandora® . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Streaming Pandora® . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Available Operations in Pandora® . . . . . . . . . . . . . 19
Handsfree Calling (via BLUETOOTH
only) (CDE-175BT/ CDE-172BT/
UTE-73BT only)
Receiving a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Available Operations during Call . . . . . . . . . . . . . . 21
6-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
Useful Functions
Adjusting Bass Level/ Mid Level/ Treble Level/
Subwoofer Level/ Balance (Between Left and
Right)/ Fader (Between Front and Rear) . . . . . . 22
Setting the BASS ENGINE SQ . . . . . . . . . . . . . . . . . . 22
Using Siri Eyes Free (CDE-175BT/ CDE-172BT/
UTE-73BT only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Settings
Canceling the DEMO Mode . . . . . . . . . . . . . . . . . . . 24
Basic Setting Operation . . . . . . . . . . . . . . . . . . . . . . . 24
General Setup (GENERAL) . . . . . . . . . . . . . . . . . . . . . 24
Audio Setup (AUDIO) . . . . . . . . . . . . . . . . . . . . . . . . . 25
Display Setup (DISPLAY) . . . . . . . . . . . . . . . . . . . . . . 25
BLUETOOTH Setup (BLUETOOTH) (CDE-175BT/
CDE-172BT/ UTE-73BT only) . . . . . . . . . . . . . . . . . 26
Additional Information
Updating the Firmware . . . . . . . . . . . . . . . . . . . . . . . 27
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Connection/Installation
Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Parts List for Installation . . . . . . . . . . . . . . . . . . . . . . 38
Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Guide to Parts and Controls
Main unit
EN
FR
ES
Front panel release button
Enter the call menu. Receive/end a call.
Press and hold for more than 2 seconds to
switch the BLUETOOTH signal.
Control dial
Rotate to adjust the volume.
ENTER
Enter the selected item.
(browse) (pages 14, 15, 18, 19)
Enter the browse mode during playback.
(Not available when a USB device in Android
mode or iPod is connected.)
Select PTY in RDS.
N-Mark (CDE-175BT only)
Touch the control dial with Android
smartphone to make BLUETOOTH
connection.
Radio mode:
Tune in radio stations automatically. Press
and hold to tune manually.
7-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
Disc/USB Device mode:
Switch between previous/next song.
Press and hold for 2 seconds to fast-reverse/
fast-forward.
SiriusXM mode (CDE-175BT/ CDE-172BT
only):
Press to ascend or descend through Channel
numbers.
Pandra® mode (CDE-175BT/ CDE-172BT/
UTE-73BT only):
to skip to next song.
Press
(pages 22)
Disc slot (CDE-175BT/ CDE-172BT/ CDE-170
only)
Display window
(disc eject) (CDE-175BT/ CDE-172BT/
CDE-170 only)
USB port
SOURCE
Change the source.
(Power)
Turn on the power.
Press and hold for more than 2 seconds to
turn off the power and the display.
Press in the Radio mode to change the radio
band.
Press in SiriusXM mode to switch bands.
Press in Pandora mode to bookmark.
A.ME
Press and hold for more than 2 seconds in the
Radio mode to store stations automatically.
(back)
Return to the previous display.
SLEEP
Press and hold for 2 seconds to turn the
source off and display the clock.
(page 22)
Open audio setup mode directly.
SETUP
Press and hold to open the setup menu.
8-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
VOICE (pages 21, 22)
Press to activate voice dial, voice recognition
(Android™ smartphone only), or the Siri
function (iPhone only).
Number buttons (1 to 6)
Receive stored radio stations. Press and hold
to store stations.
Skip an album for audio device. Press and
hold to skip albums continuously.
(Not available when a USB device in Android
mode or iPod is connected.)
Press to thumbs up, or to thumbs down
in Pandora® (page 19).
(play/pause)
(repeat)
(Not available when a USB device in Android
mode is connected.)
(shuffle)
(Not available when a USB device in Android
mode is connected.)
MIC (CDE-175BT/ CDE-172BT/ UTE-73BT
only) (page 21)
VIEW
Change display items.
(scroll)
Press and hold to scroll a display item.
AUX input jack
(MUTE)
Set the mute mode to on/off.
DIM.
Press to change the Dimmer function.
Controllable with Remote Control
This unit can be controlled with an optional
Alpine remote control. For details, consult
your Alpine dealer.
Point the optional remote control transmitter
at the remote-control sensor.
EN
FR
ES
Remote control sensor
Connectable to Remote Control Interface
Box
With an optional Alpine Steering Wheel
Remote Control Interface Box, this unit is
controllable from the vehicles steering wheel
controls. For details, contact your Alpine
dealer.
9-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
Getting Started
To cancel the demonstration (DEMO)
display, see page 24.
For the connection/installation, see page
38.
Resetting the Unit
Before operating the unit for the first time, or
after replacing the car battery or changing
connections, you must reset the unit.
Press and Number button 6 for more
than 2 seconds.
Note
Detaching the Front Panel
You can detach the front panel of this unit to
prevent theft.
Press and hold (Power) until the unit
turns off, press the front panel release
button , then pull the panel towards
you to remove.
Resetting the unit will erase the clock setting and some
stored contents.
Setting the Clock
Press and hold /SETUP for at least 2
seconds, rotate the control dial to select
[GENERAL], then press it.
Rotate the control dial to select [CLOCK
ADJ], then press it.
The hour indication flashes.
Rotate the control dial to adjust the hour
and minute.
To move the digital indication, press
Caution alarm
If you turn the ignition switch to the OFF position
without detaching the front panel, the caution
alarm will sound for a few seconds. The alarm will
only sound if the built-in amplifier is used.
Serial numbers (CDE-175BT only)
To display the clock
Make sure the serial numbers on the bottom of
the unit and the back of the front panel are
matched correctly. Otherwise you cannot make
BLUETOOTH pairing, connection and
disconnection by NFC.
Press VIEW.
Attaching the front panel
10-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
Press ENTER to set the hour and minute.
Press
(back) twice.
The setup is complete.
Preparing a BLUETOOTH Device
(CDE-175BT/ CDE-172BT/ UTE73BT only)
You can enjoy music, or perform handsfree
calling depending on the BLUETOOTH
compatible device such as a smartphone, cellular
phone and audio device (hereafter “BLUETOOTH
device” if not otherwise specified). For details on
connecting, refer to the operating instructions
supplied with the device.
Before connecting the device, turn down the
volume of this unit; otherwise, loud sound may
result.
Connecting with a Smartphone by One
touch (NFC) (CDE-175BT only)
By touching the control dial on the unit with an
NFC* compatible smartphone, the unit is paired
and connected with the smartphone
automatically.
* NFC (Near Field Communication) is a technology
enabling short-range wireless communication between
various devices, such as mobile phones and IC tags.
Thanks to the NFC function, data communication can
be achieved easily just by touching the relevant symbol
or designated location on NFC compatible devices.
For a smartphone with Android OS 4.0 or lower
installed, downloading the app “NFC Easy
Connect” available at Google Play™ is required.
The app may not be downloadable in some
countries/regions.
Activate the NFC function on the
smartphone.
Make sure that
the unit.
To disconnect by One touch
Touch the N-Mark part of the unit with the
N-Mark part of the smartphone again.
Notes
• When making the connection, handle the smartphone
carefully to prevent scratches.
• One touch connection is not possible when the unit is
already connected to two NFC compatible devices. In
this case, disconnect either device, and make
connection with the smartphone again.
When connecting a BLUETOOTH device for the
first time, mutual registration (called “pairing”) is
required. Pairing enables this unit and other
devices to recognize each other. This unit can
connect two BLUETOOTH devices (two cellular
phones, or a cellular phone and an audio device).
Place the BLUETOOTH device within
1 m (3 ft) of this unit.
Press and hold /SETUP for at least 2
seconds, rotate the control dial to select
[BLUETOOTH], then press it.
Rotate the control dial to select
[PAIRING], then press it.
Rotate the control dial to select [SET
DEVICE 1]* or [SET DEVICE 2]*, then press
it.
flashes while the unit is in pairing standby
mode.
Touch the N-Mark part of the unit with
the N-Mark part of the smartphone.
* [SET DEVICE 1] or [SET DEVICE 2] will be changed to
the paired device name after pairing is complete.
EN
FR
ES
Pairing and connecting with a
BLUETOOTH device
For details, refer to the operating instructions
supplied with the smartphone.
lights up on the display of
Perform pairing on the BLUETOOTH
device so it detects this unit.
11-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
6
Select [CDE-175BT] [CDE-172BT] [UTE73BT] (your model name) shown in the
display of the BLUETOOTH device.
If your model name does not appear, repeat
from step 2.
If passkey* input is required on the
BLUETOOTH device, input [0000].
Connecting with a paired BLUETOOTH
device
To use a paired device, connection with this unit
is required. Some paired devices will connect
automatically.
Press and hold /SETUP for at least 2
seconds, rotate the control dial to select
[BLUETOOTH], then press it.
Rotate the control dial to select [BT IN],
then press it.
* Passkey may be called “Passcode,” “PIN code,” “PIN
number” or “Password,” etc., depending on the
device.
Input passkey
Make sure that
Activate the BLUETOOTH function on the
BLUETOOTH device.
Operate the BLUETOOTH device to
connect to this unit.
[0000]
or
When pairing is made,
stays lit.
lights up.
lights up.
Icons in the display:
Select this unit on the BLUETOOTH
device to establish the BLUETOOTH
connection.
Lights up when handsfree calling is
available by enabling the HFP
(Handsfree Profile).
or lights up when the connection is
made.
Lights up when the audio device is
playable by enabling the A2DP
(Advanced Audio Distribution Profile).
Note
While connecting to a BLUETOOTH device, this unit
cannot be detected from another device. To enable
detection, enter the pairing mode and search for this unit
from another device.
To start playback
For details, see “Playing a BLUETOOTH Device
(CDE-175BT/ CDE-172BT/ UTE-73BT only)”
(page 17).
To disconnect the paired device
Perform steps 2 to 4 to disconnect after this unit
and the BLUETOOTH device are paired.
To connect the last-connected device from
this unit
Activate the BLUETOOTH function on the
BLUETOOTH device.
To connect with the audio device, press
SOURCE to select [BT AUDIO].
To connect with the cellular phone, press
Note
While streaming BLUETOOTH audio, you cannot connect
from this unit to the cellular phone. Connect from the
cellular phone to this unit instead.
Tip
With BLUETOOTH signal on: when the ignition is turned
to on, this unit reconnects automatically to the lastconnected cellular phone.
12-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
To install the microphone
For details, see “Installing the microphone (CDE175BT/ CDE-172BT/ UTE-73BT only)” (page 42).
Connecting with an iPhone/iPod
(BLUETOOTH Auto Pairing)
When an iPhone/iPod with iOS5 or later installed
is connected to the USB port, the unit is paired
and connected with the iPhone/iPod
automatically.
To enable BLUETOOTH Auto Pairing, make sure
[AUTO PAIR] in [BLUETOOTH] is set to [ON] (page
26).
Activate the BLUETOOTH function on the
iPhone/iPod.
Connect an iPhone/iPod to the USB port.
EN
Connecting Other Portable Audio
Device
FR
ES
Turn off the portable audio device.
Turn down the volume on the unit.
Connect the portable audio device to the
AUX input jack (stereo mini jack) on the
unit with a connecting cord (not
supplied)*.
* Be sure to use a straight type plug.
Make sure that
the unit.
lights up on the display of
Notes
• BLUETOOTH Auto Pairing is not possible if the unit is
already connected to two BLUETOOTH devices. In this
case, disconnect either device, then connect the
iPhone/iPod again.
• If BLUETOOTH Auto Pairing is not established, see
“Preparing a BLUETOOTH Device (CDE-175BT/ CDE172BT/ UTE-73BT only)” (page 11).
Connecting a USB Device
Press SOURCE
to select [AUX].
To match the volume level of the
connected device to other sources
Start playback of the portable audio device at a
moderate volume, and set your usual listening
volume on the unit.
Press and hold /SETUP for at least 2 seconds,
then select [AUDIO] [AUX VOL] (page 25).
Turn down the volume on the unit.
Connect the USB device to the unit.
To connect an iPod/iPhone, use the USB
connection cable for iPod (not supplied)
(CDE-175BT/ CDE-172BT/ UTE-73BT only).
13-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
Using Radio Data System (RDS)
Listening to the Radio
Selecting program types (PTY)
Listening to the Radio
To listen to the radio, press SOURCE
[TUNER].
to select
Storing automatically
Press
/A.ME to change the band (FM1,
FM2, FM3, AM1 or AM2).
Press and hold
seconds.
/A.ME for at least 2
The unit stores stations in order of frequency
on the number buttons.
Tuning
Press
/A.ME to change the band (FM1,
FM2, FM3, AM1 or AM2).
Perform tuning.
To tune manually
to locate the
Press and hold
approximate frequency, then press
repeatedly to finely adjust to the desired
frequency.
To tune automatically
Press
Scanning stops when the unit receives a
station.
Storing manually
While receiving the station that you want
to store, press and hold a number button
(1 to 6) until [MEM] appears.
Receiving the stored stations
Select the band, then press a number
button (1 to 6).
14-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
Press
(browse) during FM reception.
Rotate the control dial until the desired
program type appears, then press it.
The unit starts to search for a station
broadcasting the selected program type.
Type of programs
NEWS (News), INFORM (Information),
SPORTS (Sports), TALK (Talk), ROCK (Rock),
CLS ROCK (Classic Rock), ADLT HIT (Adult
Hits), SOFT RCK (Soft Rock), TOP 40 (Top 40),
COUNTRY (Country), OLDIES (Oldies), SOFT
(Soft), NOSTALGA (Nostalgia), JAZZ (Jazz),
CLASSICL (Classical), R & B (Rhythm and
Blues), SOFT R&B (Soft Rhythm and Blues),
LANGUAGE (Foreign Language), REL MUSC
(Religious Music), REL TALK (Religious Talk),
PERSNLTY (Personality), PUBLIC (Public),
COLLEGE (College), HABL ESP (Spanish Talk),
MUSC ESP (Spanish Music), HIP HOP (HipHop), WEATHER (Weather)
Setting clock time (RDS CT)
The CT data from the RDS transmission sets the
clock.
Set [RDS CT ON] in [GENERAL] (page
24).
Notes
Listening to the SiriusXM Radio
(CDE-175BT/ CDE-172BT only)
Activating your SiriusXM Subscription
Only SiriusXM® brings you more of what you love
to listen to, all in one place. Get over 140
channels, including commercial-free music plus
the best sports, news, talk, comedy and
entertainment. Welcome to the world of satellite
radio. A SiriusXM Connect Vehicle Tuner and
Subscription are required. For more information,
visit
www.siriusxm.com
After installing your SiriusXM Connect Vehicle
Tuner and antenna, press SOURCE to select
[SIRIUS XM]. You should be able to hear the
SiriusXM preview channel on Channel 1. After
verifying that you can hear the preview channel,
select Channel 0 to find the Radio ID of your
tuner. In addition, the Radio ID is located on the
bottom of the SiriusXM Connect Vehicle Tuner
and its packaging. You will need this number to
activate your subscription. Write the number
down for reference.
Note
The SiriusXM Radio ID does not include the letters I, O, S
or F.
In the USA, you can activate online or by calling
SiriusXM Listener Care:
• Online: Visit
www.siriusxm.com/activatenow
• Phone: Call 1-866-635-2349
• The activation process usually takes 10 to 15 minutes,
but may take up to an hour.
• Your radio will need to be turned on and receiving the
SiriusXM signal to receive the activation message.
Selecting channels for SiriusXM
EN
Press
Rotate the control dial to select
[CHANNEL], then press it.
FR
Rotate the control dial to select the
desired channel, then press it.
ES
(browse).
To select channels from categories
1 Press
(browse).
2 Rotate the control dial to select [CATEGORY], then
press it.
3 Rotate the control dial to select the desired
category, then press it.
The channel list appears.
4 Rotate the control dial to select the desired
channel, then press it.
To store channels
1 While receiving the channel that you want to
store, press and hold a number button (1 to 6)
until [MEM] appears.
To receive the stored channel, press
/A.ME to
select [SX1], [SX2] or [SX3], then press a number
button (1 to 6).
In Canada, you can activate online or by calling
SiriusXM Listener Care:
• Online: Visit
www.siriusxm.ca/activatexm
• Phone: Call 1-877-438-9677
As part of the activation process, the SiriusXM
satellites will send an activation message to your
tuner. When your radio detects that the tuner has
received the activation message, your radio will
display: [SUBSCRIPTION UPDATED - PRESS ENT
TO CONTINUE]. Once subscribed, you can tune to
channels in your subscription plan.
15-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
To set a parental control
The parental control feature allows you to limit
access to SiriusXM channels with mature content.
When enabled, the parental control feature
requires you to enter a passcode to tune to the
locked channels. Information on setting up the
passcode and locking channels can be found
below.
1 Press and hold
/SETUP for at least 2 seconds
and rotate the control dial.
Playback
Playing a Disc (CDE-175BT/ CDE172BT/ CDE-170 only)
Insert the disc (label side up).
2 Select [GENERAL] [SXM PARENTAL]
[LOCK SELECT]
[LOCK ON].
3 Enter the passcode by rotating the control dial on
the unit.
To move the entry position, press
unit.
The initial passcode is [0000].
on the
Playback starts automatically.
4 After entering the passcode, press ENTER.
To unlock the channels, select [LOCK OFF].
To change the passcode
1 Press and hold
/SETUP for at least 2 seconds
and rotate the control dial.
2 Select [GENERAL] [SXM PARENTAL] [CODE
EDIT].
3 Enter the current passcode on the current
passcode input display, then press ENTER.
The initial passcode is [0000].
4 Enter your new 4-digit passcode on the new
Playing a USB Device
In these Operating Instructions, “iPod” is used as
a general reference for the iPod functions on an
iPod and iPhone, unless otherwise specified by
the text or illustrations. (iPod/iPhone operation is
available on CDE-175BT/ CDE-172BT/ UTE-73BT
only.)
For details on the compatibility of your iPod, see
“About iPod (CDE-175BT/ CDE-172BT/ UTE-73BT
only)” (page 28).
passcode input display, then press ENTER.
To change display items
Press VIEW to change as follows:
Channel Number (Default) Channel Name
Artist Name Song Title Content Info
Category Name Clock
AOA (Android Open Accessory) 2.0, MSC (Mass
Storage Class) and MTP (Media Transfer Protocol)
type USB devices* compliant with the USB
standard can be used. Depending on the USB
device, the Android mode or MSC/MTP mode
can be selected on the unit.
Some digital media players or Android
smartphones may require setting to MTP mode.
* e.g., a USB flash drive, digital media player, Android
smartphone
Notes
• For details on the compatibility of your USB device,
consult your nearest Alpine dealer.
• Smartphones with Android OS 4.1 or higher installed
support Android Open Accessory 2.0 (AOA 2.0).
However, some smartphones may not fully support
AOA 2.0 even if Android OS 4.1 or higher is installed.
For details on the compatibility of your Android
smartphone, consult your nearest Alpine dealer.
16-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
• Playback of the following files is not supported.
MP3/WMA/FLAC/AAC*:
– copyright-protected files
– DRM (Digital Rights Management) files
– Multi-channel audio files
MP3/WMA/AAC*:
– lossless compression files
* CDE-175BT/ CDE-172BT/ UTE-73BT only
Before making a connection, select the USB
mode (Android mode or MSC/MTP mode)
depending on the USB device (page 24).
Connect a USB device to the USB port
(page 13).
Playback starts.
If a device is already connected, to start
playback, press SOURCE to select [USB]
([IPD] appears in the display when the iPod is
recognized) (CDE-175BT/ CDE-172BT/ UTE73BT only).
Playing a BLUETOOTH Device
(CDE-175BT/ CDE-172BT/ UTE73BT only)
You can play contents on a connected device
that supports BLUETOOTH A2DP (Advanced
Audio Distribution Profile).
FR
Make BLUETOOTH connection with the
audio device (page 11).
To select the audio device, press and hold /
SETUP for at least 2 seconds, then select
[BLUETOOTH] [AUDIO DEVICE] (page 26).
Press SOURCE
Press and hold SLEEP for 2 seconds.
Adjust the volume on this unit.
To remove the device
Notes
Stop playback, then remove the device.
• Depending on the audio device, information such as
title, track number/time and playback status may not
be displayed on this unit.
• Even if the source is changed on this unit, playback of
the audio device does not stop.
Adjust the volume on this unit.
To stop playback
Caution for iPhone
When you connect an iPhone via USB, phone call
volume is controlled by the iPhone, not the unit.
Do not inadvertently increase the volume on the
unit during a call, as a sudden loud sound may
result when the call ends.
EN
to select [BT AUDIO].
Operate the audio device to start
playback.
To match the volume level of the
BLUETOOTH device to other sources
Start playback of the BLUETOOTH audio device at
a moderate volume, and set your usual listening
volume on the unit.
Press and hold /SETUP for at least 2 seconds,
then select [AUDIO] [BTA VOL] (page 25).
17-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
ES
Searching and Playing Tracks
Press ENTER to return to the browse
mode.
The selected item appears.
Repeat play and shuffle play
Not available when a USB device in Android
mode is connected.
During playback, press
(repeat) or
(shuffle) repeatedly to select the
desired play mode.
Playback in the selected play mode may take
time to start.
Available play modes differ depending on the
selected sound source.
Searching a track by name
Not available when a USB device in Android
mode or iPod is connected.
During CD or USB playback, press
(browse) to display the list of search
categories.
When the track list appears, press
(back)
repeatedly to display the desired search
category.
Rotate the control dial to select the
desired search category, then press it to
confirm.
Repeat step 2 to search the desired track.
Playback starts.
Searching by skipping items
(Jump mode)
Not available when a USB device in Android
mode or iPod is connected.
Press
Press
(browse).
Rotate the control dial to select the item.
The list is jumped in steps of 10% of the total
number of items.
18-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
Rotate the control dial to select the
desired item, then press it.
Playback starts.
When activating the BLUETOOTH function
Listening to Pandora® (CDE175BT/ CDE-172BT/ UTE-73BT
only)
You can adjust the volume level.
Press and hold /SETUP for at least 2 seconds,
then select [AUDIO] [BTA VOL] (page 25).
Available Operations in Pandora®
Pandora® is available to stream music through
your iPhone and Android smartphone. You can
control Pandora® on a BLUETOOTH connected
iPhone/Android smartphone from this unit.
Pandora® is only available in certain countries.
Please visit
http://www.pandora.com/legal
for more information.
Setting up Pandora®
Download the latest version of the
Pandora® application from your
smartphone’s app store. A list of
compatible devices can be found at
www.pandora.com/everywhere/mobile
“Thumbs” feedback
To select the audio device, press and hold /
SETUP for at least 2 seconds, then select
[BLUETOOTH] [AUDIO DEVICE] (page 26).
Press SOURCE
Press
(play/pause) to start
playback.
to select [PANDORA].
Launch Pandora® application on your
mobile device.
(Thumbs Up)
The station list allows you to easily select a
desired station.
Make BLUETOOTH connection with the
audio device (page 11).
During playback, press
or (Thumbs Down).
Using the station list
Streaming Pandora®
FR
“Thumbs Up” or “Thumbs Down” feedback allows
you to personalize stations.
During playback, press
(browse).
Press
to select the sorting order [BY
DATE] or [A TO Z].
Rotate the control dial to select the
desired station, then press it.
Playback starts.
Bookmarking
The track currently being played can be
bookmarked and stored in your Pandora®
account.
During playback, press
EN
If the device number appears
Make sure that the same numbers are displayed
(e.g., 123456) in this unit and the mobile device,
then press ENTER on this unit and select [Yes] on
the mobile device.
19-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
ES
Handsfree Calling (via
BLUETOOTH only) (CDE-175BT/
CDE-172BT/ UTE-73BT only)
To use a cellular phone, connect it with this unit.
You can connect two cellular phones to the unit.
For details, see “Preparing a BLUETOOTH Device
(CDE-175BT/ CDE-172BT/ UTE-73BT only)”
(page 11).
Rotate the control dial to select [PHONE
BOOK], then press it.
Rotate the control dial to select an initial
from the initial list, then press it.
Rotate the control dial to select a name
from the name list, then press it.
Rotate the control dial to select a
number from the number list, then press
it.
The phone call starts.
From the call history
Press when a call is received with a
ringtone.
The phone call starts.
Note
The ringtone and talker’s voice are output only from the
front speakers.
When two cellular phones are connected to
the unit, rotate the control dial to select
either phone, then press it.
Receiving a Call
Press
Rotate the control dial to select
[HISTORY], then press it.
A list of the call history appears.
To reject the call
Rotate the control dial to select a name
or phone number from the call history,
then press it.
The phone call starts.
Press and hold SLEEP for 2 seconds.
To end the call
Press
again.
By phone number input
From the phonebook
Press
When two cellular phones are connected to
the unit, rotate the control dial to select
either phone, then press it.
20-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
When two cellular phones are connected to
the unit, rotate the control dial to select
either phone, then press it.
Making a Call
You can make a call from the phonebook or call
history when a cellular phone supporting PBAP
(Phone Book Access Profile) is connected.
When two cellular phones are connected to the
unit, select either phone.
Press
Rotate the control dial to select [DIAL
NUMBER], then press it.
Rotate the control dial to enter the
phone number, and lastly select [ ]
(space), then press ENTER*.
The phone call starts.
* To move the digital indication, press
Note
[ _ ] appears instead of [ # ] on the display.
To reduce echo and noise (Echo Canceler/
Noise Canceler Mode)
By redial
Press
Press and hold MIC.
Settable mode: [BTP EC/NC 1], [BTP EC/NC 2].
When two cellular phones are connected to
the unit, rotate the control dial to select
either phone, then press it.
To switch between handsfree mode and
handheld mode
Rotate the control dial to select [REDIAL],
then press it.
During a call, press
/A.ME to switch the
phone call audio between the unit and cellular
phone.
EN
Note
FR
The phone call starts.
By voice tags
Depending on the cellular phone, this operation may not
be available.
ES
You can make a call by saying the voice tag
stored in a connected cellular phone that has a
voice dialing function.
Press
When two cellular phones are connected to
the unit, rotate the control dial to select
either phone, then press it.
Rotate the control dial to select [VOICE
DIAL], then press it.
Alternatively, press VOICE.
Say the voice tag stored on the cellular
phone.
Your voice is recognized, and the call is made.
To cancel voice dialing
Press VOICE.
Available Operations during Call
To adjust the ringtone volume
Rotate the control dial while receiving a call.
To adjust the talker’s voice volume
Rotate the control dial during a call.
To adjust the volume for the other party
(Mic gain adjustment)
Press MIC.
Adjustable volume levels: [MIC GAIN LOW], [MIC
GAIN MID], [MIC GAIN HI].
21-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
Using Siri Eyes Free (CDE-175BT/
CDE-172BT/ UTE-73BT only)
Useful Functions
Adjusting Bass Level/ Mid Level/
Treble Level/ Subwoofer Level/
Balance (Between Left and
Right)/ Fader (Between Front
and Rear)
Press
/SETUP.
Rotate the control dial to adjust the each
mode, then press it.
Each press changes the mode as follows:
BASS MID TREBLE SUBW BALANCE
FADER
Bass Level
Mid Level
Treble Level
Subwoofer Level
Balance
Fader
-7 to +7
-7 to +7
-7 to +7
OFF to 0 to +15
L15 to R15
R15 to F15
Press /SETUP to return the normal
mode.
Notes
• If no operation is performed for 5 seconds, the unit
automatically returns to normal mode.
• When Bass/Mid/Treble/Subwoofer Level is adjusted,
BASS ENGINE SQ is set to [OFF] (page 22).
Setting the BASS ENGINE SQ
Creating the ideal Bass impact for your musical
taste using BASS ENGINE SQ.
Press
Rotate the control dial to adjust [BASS
ENGINE], then press it.
Setting contents: [OFF], [1]-[6]
Note
When Bass/Mid/Treble/Subwoofer Level is adjusted, BASS
ENGINE SQ is set to [OFF] (page 22).
22-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
Siri Eyes Free allows you to use an iPhone
handsfree by simply speaking into the
microphone. This function requires you to
connect an iPhone to the unit via BLUETOOTH.
Availability is limited to iPhone 4s or later. Make
sure that your iPhone is running the latest iOS
version.
You must complete BLUETOOTH registration and
connection configurations for the iPhone with
the unit in advance. For details, see “Preparing a
BLUETOOTH Device (CDE-175BT/ CDE-172BT/
UTE-73BT only)” (page 11). To select the
iPhone, press and hold /SETUP for at least 2
seconds, then select [BLUETOOTH] [AUDIO
DEVICE] (page 26).
Activate the Siri function on the iPhone.
For details, refer to the operating instructions
supplied with the iPhone.
Press VOICE.
The voice command display appears.
After the iPhone beeps, speak into the
microphone.
The iPhone beeps again, then Siri starts
responding.
To deactivate Siri Eyes Free
Press VOICE.
Notes
• The iPhone may not recognize your voice depending
on usage conditions. (For example, if you are in a
moving car.)
• Siri Eyes Free may not function properly, or the
response time may lag in locations where iPhone
signals are difficult to receive.
• Depending on the iPhone’s operating condition, Siri
Eyes Free may not function properly, or may quit.
• If you play a track with an iPhone using the BLUETOOTH
audio connection, when the track starts playback via
BLUETOOTH, Siri Eyes Free automatically quits and the
unit switches to the BLUETOOTH audio source.
• When Siri Eyes Free is activated during audio playback,
the unit may switch to the BLUETOOTH audio source
even if you do not specify a track to play.
• When connecting the iPhone to the USB port, Siri Eyes
Free may not function properly, or may quit.
• When connecting the iPhone to the unit via USB, do
not activate Siri with the iPhone. Siri Eyes Free may not
function properly, or may quit.
• There is no audio sound while Siri Eyes Free is activated.
EN
FR
ES
23-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
General Setup (GENERAL)
Settings
Canceling the DEMO Mode
You can cancel the demonstration display which
appears when the source is off and the clock is
displayed.
Press and hold /SETUP for at least 2
second, rotate the control dial to select
[GENERAL], then press it.
Rotate the control dial to select [DEMO
MODE], then press it.
Rotate the control dial to select [DEMO
OFF], then press it.
The setting is complete.
Press
(back) twice.
The display returns to normal reception/play
mode.
Basic Setting Operation
You can set items in the following setup
categories:
General setup (GENERAL), Audio setup (AUDIO),
Display setup (DISPLAY), BLUETOOTH setup
(BLUETOOTH)
Press and hold
seconds.
Rotate the control dial to select the setup
category, then press it.
/SETUP for at least 2
The items that can be set differ depending on
the source and settings.
Rotate the control dial to select the
options, then press it.
To return to the previous display
Press
(back).
24-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
DEMO MODE (demonstration)
Activates the demonstration: [ON], [OFF].
CLOCK ADJ (clock adjust) (page 10)
CAUTION ALM (caution alarm)
Activates the caution alarm: [ON], [OFF] (page
10).
(Available only while the source is off and the
clock is displayed.)
BEEP
Activates the beep sound: [ON], [OFF].
AUTO OFF
Shuts off automatically after a desired time
when the unit is turned off: [ON]
(30 minutes), [OFF].
USB MODE
Changes the USB mode: [MSC/MTP],
[ANDROID].
(Available only when the USB source is
selected.)
RDS CT (clock time)
Activates the CT function: [ON], [OFF].
SXM PARENTAL (CDE-175BT/ CDE-172BT only)
Sets the parental lock to [ON], [OFF], and edits
the passcode (page 16).
(Available only when SiriusXM is selected.)
SMX SIGNAL (CDE-175BT/ CDE-172BT only)
Displays the current status of the SiriusXM
signal strength:[NO SIGNAL] (signal level 0),
[WEAK] (signal level 1), [GOOD] (signal level 2),
[EXCELLENT] (signal level 3).
(Available only when SiriusXM is selected.)
SXM RESET (CDE-175BT/ CDE-172BT only)
Initializes the SiriusXM Connect Vehicle Tuner
settings (preset channels/parental lock): [YES],
[NO].
(Available only when SiriusXM is selected.)
FIRMWARE
(Available only while the source is off and the
clock is displayed.)
Checks/updates the firmware version. For
details, consult your nearest Alpine dealer.
FW VERSION (firmware version)
Displays current firmware version.
FW UPDATE (firmware update)
Enters firmware update process: [YES], [NO].
Updating the firmware takes a few minutes to
complete. During the update, do not turn the
ignition to the OFF position, nor remove the
USB device.
Audio Setup (AUDIO)
This setup menu is not available when the source
is off and the clock is displayed.
EQ PRESET
Selects an equalizer curve from 10 equalizer
curves or off:
[USER], [FLAT](OFF), [POPS], [ROCK], [NEWS],
[JAZZ], [ELEC DANCE], [HIP HOP], [EASY LIS],
[COUNTRY], [CLASSICAL].
The equalizer curve setting can be memorized
for each source.
3BAND PEQ (3Band Parametric Equalizer)
Adjusts WIDTH, FREQUENCY and LEVEL for
each after BAND is selected.
BAND: [BASS], [MID], [TREBLE].
Setting contents: [WIDTH ], [CENTER
FREQ], [LEVEL].
BALANCE
Adjusts the sound balance: [R 15] – [0] – [L 15].
FADER
Adjusts the relative level: [F 15] – [0] – [R 15].
SUBWOOFER (subwoofer)
SUBW LEVEL (subwoofer level)
Adjusts the subwoofer volume level:
[OFF], [0] - [+15].
SUBW PHASE (subwoofer phase)
Selects the subwoofer phase: [NORMAL],
[REVERSE].
LPF FREQ (low pass filter frequency)
Selects the subwoofer cut-off frequency:
[80Hz], [100Hz], [120Hz].
HPF FREQ (high pass filter frequency)
Selects the front/rear speaker cut-off
frequency: [OFF], [80Hz], [100Hz], [120Hz].
AUX VOL (AUX volume level)
Adjusts the volume level for each connected
auxiliary device: [+18 dB] – [0 dB] – [-8 dB].
This setting negates the need to adjust the
volume level between sources.
(Available only when the AUX is selected.)
BTA VOL (BLUETOOTH audio volume level) (CDE175BT/ CDE-172BT/ UTE-73BT only)
Adjusts the volume level for each connected
BLUETOOTH device: [+6 dB] – [0 dB] – [-6 dB].
This setting negates the need to adjust the
volume level between sources.
(Available only when the BT audio or Pandora®
is selected.)
Display Setup (DISPLAY)
BLACK OUT
If no operation is performed for a while with
[ON] set, the display disappears automatically.
Activates the black out: [ON], [OFF].
DIMMER
Changes the display brightness:
For CDE-175BT/ CDE-172BT/UTE-73BT:
[OFF], [ON], [AUTO], [CLOCK].
([AUTO] is available only when the
illumination control lead is connected, and
the head light is turned on.)
For CDE-170: [OFF], [ON], [CLOCK].
To set this function to be active only during a
fixed period, select [CLOCK], then set the start
and end times.
– To set the brightness when the dimmer
function is activated:
Set [DIMMER] to [ON], then adjust
[BRIGHTNESS].
– To set the brightness when the dimmer
function is deactivated:
Set [DIMMER] to [OFF], then adjust
[BRIGHTNESS].
The brightness setting is stored and applied
when the dimmer function is activated or
deactivated.
BRIGHTNESS
Adjusts the display brightness. The brightness
level is adjustable: [1] – [10].
25-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
EN
FR
ES
KEY COLOR (CDE-175BT/ CDE-172BT/ UTE-73BT
only)
Sets a preset color or customized color for the
buttons.
OPTION
Selects from 10 presets colors, 1 customized
color.
CUSTOMIZE
Registers a customized color for the buttons.
RGB RED, RGB GREEN, RGB BLUE
Adjustable color range: [0] – [32] ([0]
cannot be set for all color ranges).
DISP COLOR (CDE-175BT/ CDE-172BT/ UTE-73BT
only)
Sets a preset color or customized color for the
display.
OPTION
Selects from 10 presets colors, 1 customized
color.
CUSTOMIZE
Registers a customized color for the display.
RGB RED, RGB GREEN, RGB BLUE
Adjustable color range: [0] – [32] ([0]
cannot be set for all color ranges).
RINGTONE
Selects whether this unit or the connected
cellular phone outputs the ringtone: [1] (this
unit), [2] (cellular phone).
AUTO ANSWER
Sets this unit to answer an incoming call
automatically: [OFF], [1] (about 3 seconds), [2]
(about 10 seconds).
AUTO PAIR (auto pairing)
Starts BLUETOOTH pairing automatically
when iOS device version 5.0 or later is
connected via USB: [ON], [OFF].
BT IN (page 12)
Activates/deactivates the BLUETOOTH
function.
BT INITIAL (BLUETOOTH initialize)
Initializes all the BLUETOOTH related settings
(pairing information, preset number, device
information, etc.): [YES], [NO].
When disposing the unit, initialize all the
settings.
(Available only while the source is off and the
clock is displayed.)
TEXT SCROLL
Scrolls long items automatically: [ON], [OFF].
(Not available when the AUX or tuner is
selected.)
BLUETOOTH Setup (BLUETOOTH)
(CDE-175BT/ CDE-172BT/ UTE73BT only)
PAIRING (page 11)
Connects up to two BLUETOOTH devices:
[DEVICE 1], [DEVICE 2].
[DEVICE 1] or [DEVICE 2] will be changed to
the paired device name after pairing is
complete.
AUDIO DEVICE
Selects the audio device.
[*] appears on the device paired with [DEVICE
1] or the current A2DP compatible audio
device.
26-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
commer
cleaners
Additional Information
Updating the Firmware
To update the firmware, visit the Alpine website.
http://www.alpine-usa.com
Notes
• Using a USB device (not supplied) is required for
updating the firmware. Store the updater in the USB
device, and connect the device to the USB port, then
perform the update operation.
• Updating the firmware takes a few minutes to
complete. During the update, do not turn the ignition
to the OFF position, nor remove the USB device.
• This unit is designed to play discs that conform
to the Compact Disc (CD) standard. DualDiscs
and some of the music discs encoded with
copyright protection technologies do not
conform to the Compact Disc (CD) standard,
therefore, these discs may not be playable by
this unit.
• Discs that this unit CANNOT play
– Discs with labels, stickers, or sticky tape or
paper attached. Doing so may cause a
malfunction, or may ruin the disc.
– Discs with non-standard shapes (e.g., heart,
square, star). Attempting to do so may
damage the unit.
– 8 cm (3 1/4 in) discs.
Notes on CD-R/CD-RW discs
Precautions
• Cool off the unit beforehand if your car has
been parked in direct sunlight.
• Do not leave the front panel or audio devices
brought in inside the car, or it may cause
malfunction due to high temperature in direct
sunlight.
• Power antenna (aerial) extends automatically.
Moisture condensation
Should moisture condensation occur inside the
unit, remove the disc and wait for about an hour
for it to dry out; otherwise the unit will not
operate properly.
To maintain high sound quality
Do not splash liquid onto the unit or discs.
• If the multi-session disc begins with a CD-DA
session, it is recognized as a CD-DA disc, and
other sessions are not played.
• Discs that this unit CANNOT play
– CD-R/CD-RW of poor recording quality.
– CD-R/CD-RW recorded with an incompatible
recording device.
– CD-R/CD-RW which is finalized incorrectly.
– CD-R/CD-RW other than those recorded in
music CD format or MP3 format conforming
to ISO9660 Level 1/Level 2, Joliet/Romeo or
multi-session.
Playback order of audio files
Folder (album)
Audio file (track)
Notes on discs (CDE-175BT/ CDE-172BT/
CDE-170 only)
• Do not expose discs to direct sunlight or heat
sources such as hot air ducts, nor leave it in a
car parked in direct sunlight.
• Before playing, wipe the
discs with a cleaning
cloth from the center
out. Do not use solvents
such as benzine, thinner,
commercially available
cleaners.
27-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
EN
FR
ES
About iPod (CDE-175BT/ CDE-172BT/
UTE-73BT only)
• You can connect to the following iPod models.
Update your iPod devices to the latest software
before use.
Compatible iPhone/iPod models
Compatible Model
Bluetooth®
USB
Maintenance
Cleaning the connectors
The unit may not function properly if the
connectors between the unit and the front panel
are not clean. In order to prevent this, detach the
front panel (page 10) and clean the connectors
with a cotton swab. Do not apply too much force.
Otherwise, the connectors may be damaged.
iPhone 7 Plus
iPhone 7
iPhone SE
iPhone 6s Plus
Notes
iPhone 6s
iPhone 6 Plus
iPhone 6
iPhone 5s
iPhone 5c
iPhone 5
iPhone 4s
iPod touch
(6th generation)
iPod touch
(5th generation)
iPod nano
(7th generation)
• “Made for iPod,” and “Made for iPhone,” mean
that an electronic accessory has been designed
to connect specifically to iPod or iPhone,
respectively, and has been certified by the
developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note
that the use of this accessory with iPod or
iPhone may affect wireless performance.
If you have any questions or problems
concerning your unit that are not covered in this
manual, consult your nearest Alpine dealer.
28-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
• For safety, turn off the ignition before cleaning the
connectors, and remove the key from the ignition
switch.
• Never touch the connectors directly with your fingers
or with any metal device.
Specifications
FOR THE CUSTOMERS IN THE USA. NOT
APPLICABLE IN CANADA, INCLUDING IN
THE PROVINCE OF QUEBEC.
POUR LES CLIENTS AUX ÉTATS-UNIS. NON
APPLICABLE AU CANADA, Y COMPRIS LA
PROVINCE DE QUÉBEC.
AUDIO POWER SPECIFICATIONS
CTA2006 Standard
Power Output: 18 Watts RMS × 4 at 4
Ohms < 1% THD+N
SN Ratio: 80 dBA
(reference: 1 Watt into 4 Ohms)
Tuner section
FM
Tuning range: 87.7 MHz – 107.9 MHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency:
FM CCIR: -1,956.5 kHz to -487.3 kHz and
+500.0 kHz to +2,095.4 kHz
Usable sensitivity: 8 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 73 dB
Separation: 50 dB at 1 kHz
Frequency response: 20 Hz – 15,000 Hz
AM
Tuning range: 530 kHz – 1,710 kHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Sensitivity: 26 μV
CD Player section (CDE-175BT/ CDE-172BT/
CDE-170 only)
Signal-to-noise ratio: 95 dB
Frequency response: 20 Hz – 20,000 Hz
Wow and flutter: Below measurable limit
Maximum number*1 of:
Folders (albums)*2: 150
Files (tracks) and folders*3: 300
Displayable characters for a folder/ file name:
32 (Joliet)/64 (Romeo)
Corresponding codec: MP3 (.mp3), WMA (.wma)
and AAC (.m4a)*4
*1 CD-R/CD-RW only
*2 including the root folder
*3 may be less than the measured value if folder/
file names contain many charactesr
*4 CDE-175BT/ CDE-172BT only
USB Player section
Interface: USB (Full-speed)
Maximum current:
CDE-175BT/ CDE-172BT/ UTE-73BT: 1 A
CDE-170: 500 mA
The maximum number of recognizable tracks:
– folders (albums): 256
– files (tracks) per folder: 256
Compatible Android Open Accessory protocol
(AOA): 2.0
Corresponding codec:
MP3 (.mp3)
Bit rate: 8 kbps – 320 kbps (Supports VBR
(Variable Bit Rate))
Sampling rate: 16 kHz – 48 kHz
WMA (.wma)
Bit rate: 32 kbps – 192 kbps (Supports VBR
(Variable Bit Rate))
Sampling rate: 32 kHz, 44.1 kHz,
48 kHz
FLAC (.flac)
Bit depth: 16 bit, 24 bit
Sampling rate: 44.1 kHz, 48 kHz
AAC (.m4a) (CDE-175BT/ CDE-172BT/ UTE73BT only)
Bit rate: 8 kbps – 320 kbps
Sampling rate: 11.025 kHz – 48 kHz
29-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
EN
FR
ES
Wireless Communication (CDE-175BT/ CDE172BT/ UTE-73BT only)
Communication System:
BLUETOOTH Standard version 3.0
Output:
BLUETOOTH Standard Power Class 2
(Conducted MAX +1 dBm)
Maximum communication range:
Line of sight approx. 10 m (33 ft)*1
Frequency band:
2.4 GHz band
(2.4000 GHz – 2.4835 GHz)
Modulation method: FHSS
Compatible BLUETOOTH Profiles*2:
A2DP (Advanced Audio Distribution Profile)
1.3
AVRCP (Audio Video Remote Control Profile)
1.3
HFP (Handsfree Profile) 1.6
PBAP (Phone Book Access Profile)
SPP (Serial Port Profile)
Corresponding codec:
SBC (.sbc), AAC (.m4a)
*1 The actual range will vary depending on factors such
as obstacles between devices, magnetic fields around
a microwave oven, static electricity, reception
sensitivity, antenna (aerial)’s performance, operating
system, software application, etc.
*2 BLUETOOTH standard profiles indicate the purpose of
BLUETOOTH communication between devices.
Power amplifier section
Output: Speaker outputs
Speaker impedance: 4 Ω – 8 Ω
Maximum power output: 50 W × 4 (at 4 Ω)
General
Outputs:
Audio outputs terminal:
CDE-175BT/ CDE-172BT/ UTE-73BT :
FRONT, REAR, SUB
CDE-170: FRONT, SUB
Power requirements: 12 V DC car battery
(negative ground (earth))
Rated current consumption: 10 A
Dimensions:
Approx. 178 mm × 50 mm × 177 mm
(7 1/8 in × 2 in × 7 in) (w/h/d)
30-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
Mounting dimensions:
Approx. 182 mm × 53 mm × 159 mm
(7 1/4 in × 2 1/8 in × 6 3/8 in) (w/h/d)
Mass:
CDE-175BT/ CDE-172BT/ CDE-170:
Approx. 1.2 kg (2 lb 11 oz)
UTE-73BT: Approx. 0.8 kg (1 lb 12 oz)
Package contents:
Main unit (1)
Microphone (1) (CDE-175BT/ CDE-172BT/
UTE-73BT only)
Parts for installation and connections (1 set)
Optional accessories/equipment:
SiriusXM Connect Vehicle Tuner: SXV100,
SXV200, SXV300 (CDE-175BT/ CDE-172BT
only)
Your dealer may not handle some of the above
listed accessories. Please ask the dealer for
detailed information.
Design and specifications are subject to change
without notice.
Copyrights
SiriusXM Connect Vehicle Tuner and Subscription
sold separately.
www.siriusxm.com
Sirius, XM and all related marks and logos are
trademarks of Sirius XM Radio Inc. All rights
reserved.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Alpine
Electronics, Inc. is under license.
The N-Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United States
and in other countries.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States and/
or other countries.
This product is protected by certain intellectual
property rights of Microsoft Corporation. Use or
distribution of such technology outside of this
product is prohibited without a license from
Microsoft or an authorized Microsoft subsidiary.
iPhone, iPod, iPod classic, iPod nano, iPod touch,
and Siri are trademarks of Apple Inc., registered
in the U.S. and other countries. App Store is a
service mark of Apple Inc.
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.
Pandora®, the Pandora® logo, and the Pandora®
trade dress are trademarks or registered
trademarks of Pandora Media, Inc., used with
permission. Pandora is currently available in the
U.S. only.
Google, Google Play and Android are trademarks
of Google LLC.
libFLAC
Copyright (C) 2000-2009 Josh Coalson
Copyright (C) 2011-2013 Xiph.Org Foundation
Redistribution and use in source and binary
forms, with or without modification, are
permitted provided that the following conditions
are met:
– Redistributions of source code must retain the
above copyright notice, this list of conditions
and the following disclaimer.
– Redistributions in binary form must reproduce
the above copyright notice, this list of
conditions and the following disclaimer in the
documentation and/or other materials
provided with the distribution.
– Neither the name of the Xiph.org Foundation
nor the names of its contributors may be used
to endorse or promote products derived from
this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS “AS IS” AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE FOUNDATION OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGE.
Troubleshooting
The following checklist will help you remedy
problems you may encounter with your unit.
Before going through the checklist below, check
the connection and operating procedures.
For details on using the fuse and removing the
unit from the dashboard, see “Connection/
Installation” (page 38).
If the problem is not solved, please contact your
authorized Alpine dealer for assistance.
General
No sound or the sound is very low.
The position of the fader control [FADER] is not
set for a 2-speaker system.
The volume of the unit and/or connected
device is very low.
– Increase the volume of the unit and
connected device.
No beep sound.
An optional power amplifier is connected and
you are not using the built-in amplifier.
The contents of the memory have been
erased.
The power supply lead or battery has been
disconnected or not connected properly.
31-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
EN
FR
ES
RDS
Stored stations and correct time are erased.
The fuse has blown.
Makes a noise when the position of the
ignition is switched.
The leads are not matched correctly with the
car’s accessory power connector.
PTY displays [- - - - - - - -].
The current station is not an RDS station.
RDS data has not been received.
The station does not specify the program type.
During playback or reception, the
demonstration mode starts.
If no operation is performed for 5 minutes
with [DEMO ON] set, the demonstration mode
starts.
– Set [DEMO OFF] (page 24).
The disc does not play.
Defective or dirty disc.
The CD-R/CD-RW is not for audio use (page
27).
The display disappears from/does not appear
in the display window.
The dimmer is set to [DIMMER ON] (page
25).
The display disappears if you press and hold
(Power).
– Press (Power) on the unit until the display
appears.
The connectors are dirty (page 28).
The display/illumination flashes.
The power supply is not sufficient.
– Check that the car battery supplies enough
power to the unit. (The power requirement
is 12 V DC.)
The operation buttons do not function.
The disc will not eject.
Press and Number button 6 for more than 2
seconds to reset the unit.
The contents stored in memory are erased.
For your safety, do not reset the unit while you
are driving.
Radio reception
Stations cannot be received.
The sound is hampered by noises.
The connection is not correct.
– Check the connection of the car antenna
(aerial).
– If the auto antenna (aerial) will not extend,
check the connection of the power antenna
(aerial) control lead.
Preset tuning is not possible.
The broadcast signal is too weak.
32-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
CD playback
MP3/WMA/AAC files cannot be played.
The disc is incompatible with the MP3/WMA/
AAC format and version.
MP3/WMA/AAC files take longer to play than
others.
The following discs take a longer time to start
playback.
– A disc recorded with a complicated tree
structure.
– A disc recorded in Multi Session.
– A disc to which data can be added.
The sound skips.
Defective or dirty disc.
USB device playback
You cannot play items via a USB hub.
This unit cannot recognize USB devices via a
USB hub.
A USB device takes longer to play.
The USB device contains files with a
complicated tree structure.
The sound is intermittent.
The sound may be intermittent at a high-bitrate.
DRM (Digital Rights Management) files may
not be playable in some cases.
The audio file cannot be played.
USB devices formatted with file systems other
than FAT16 or FAT32 are unsupported.*
* This unit supports FAT16 and FAT32, but some USB
device may not support all of these FAT. For details,
refer to the operating instruction of each USB device or
contact the manufacturer.
Operations for skipping an album, skipping
items (Jump mode), and searching a track by
name cannot be performed.
These operations cannot be performed when
a USB device in Android mode or iPod is
connected.
– Set [USB MODE] to [MSC/MTP] (page 24).
– Remove the iPod.
The USB mode of the device is not set to the
appropriate mode.
– Make sure that the USB mode of the device
is set to MSC/MTP mode.
The sound cannot be output during playback
in Android mode.
While the unit is in ANDROID mode, the sound
outputs only from the Android smartphone.
– Check the status of the audio playback
application on the Android smartphone.
– Playback may not perform properly
depending on the Android smartphone.
NFC function
One touch connection (NFC) is not possible.
If the smartphone does not respond to the
touching.
– Check that the NFC function of the
smartphone is turned on.
– Move the N-Mark part of the smartphone
closer to the N-Mark part on this unit.
– If the smartphone is in a case, remove it.
NFC receiving sensitivity depends on the
device.
If One touch connection with the smartphone
fails several times, make BLUETOOTH
connection manually.
BLUETOOTH function
The connecting device cannot detect this unit.
Before the pairing is made, set this unit to
pairing standby mode.
While connected to two BLUETOOTH devices,
this unit cannot be detected from another
device.
– Disconnect either connection and search for
this unit from another device.
When the device pairing is made, set the
BLUETOOTH signal output to on (page 12).
Connection is not possible.
The connection is controlled from one side
(this unit or BLUETOOTH device), but not both.
– Connect to this unit from a BLUETOOTH
device or vice versa.
The name of the detected device does not
appear.
Depending on the status of the other device, it
may not be possible to obtain the name.
No ringtone.
Adjust the volume by rotating the control dial
while receiving a call.
Depending on the connecting device, the
ringtone may not be sent properly.
– Set [RINGTONE] to [1] (page 26).
The front speakers are not connected to the
unit.
– Connect the front speakers to the unit. The
ringtone is output only from the front
speakers.
The talker’s voice cannot be heard.
The front speakers are not connected to the
unit.
– Connect the front speakers to the unit. The
talker’s voice is output only from the front
speakers.
A call partner says that the volume is too low
or high.
Adjust the volume accordingly using Mic gain
adjustment (page 21).
Echo or noise occurs in phone call
conversations.
Lower the volume.
Set EC/NC Mode to [BTP EC/NC 1] or [BTP EC/
NC 2] (page 21).
If the ambient noise other than the phone call
sound is loud, try reducing this noise.
E.g.: If a window is open and road noise, etc., is
loud, shut the window. If an air conditioner is
loud, lower the air conditioner.
The phone is not connected.
When BLUETOOTH audio is played, the phone
is not connected even if you press .
– Connect from the phone.
33-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
EN
FR
ES
The phone sound quality is poor.
Phone sound quality depends on reception
conditions of cellular phone.
– Move your car to a place where you can
enhance the cellular phone’s signal if the
reception is poor.
The volume of the connected audio device is
low (high).
Volume level will differ depending on the
audio device.
– Adjust the volume of the connected audio
device or this unit (page 25).
The sound skips during playback of a
BLUETOOTH audio device.
Reduce the distance between the unit and the
BLUETOOTH audio device.
If the BLUETOOTH audio device is stored in a
case which interrupts the signal, remove the
audio device from the case during use.
Several BLUETOOTH devices or other devices
which emit radio waves are in use nearby.
– Turn off the other devices.
– Increase the distance from the other devices.
The playback sound stops momentarily when
the connection between this unit and the
cellular phone is being made. This is not a
malfunction.
The connected BLUETOOTH audio device
cannot be controlled.
Check that the connected BLUETOOTH audio
device supports AVRCP.
Some functions do not work.
Check if the connecting device supports the
functions in question.
A call is answered unintentionally.
The connecting phone is set to answer a call
automatically.
Pairing failed due to a timeout.
Depending on the connecting device, the time
limit for pairing may be short.
– Try completing the pairing within the time.
BLUETOOTH function cannot operate.
Turn off the unit by pressing (Power) for
more than 2 seconds, then turn the unit on
again.
34-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
No sound is output from the car speakers
during handsfree call.
If the sound is output from the cellular phone,
set the cellular phone to output the sound
from the car speakers.
Siri Eyes Free is not activated.
Perform the handsfree registration for an
iPhone that supports Siri Eyes Free.
Set the Siri function on the iPhone to on.
Cancel the BLUETOOTH connection with the
iPhone and the unit, and reconnect.
Pandora® operation
Pandora® connection is not possible.
Shut down the Pandora® application on the
mobile device, and then launch it again.
Messages
The following messages may appear or flash
during operation.
If these solutions do not help improve the
situation, consult your nearest Alpine dealer.
If you take the unit to be repaired because of CD
playback trouble, bring the disc that was used at
the time the problem began.
CD ERROR: The disc cannot be played. The disc
will be ejected automatically.
Clean or insert the disc correctly, or make sure
the disc is not blank or defective.
CD NO MUSIC: There is no playable file. The disc
will be ejected automatically.
Insert a disc containing playable files (page
29).
CD PUSH EJT: The disc could not be ejected
properly.
Press and hold (eject).
HUB NO SUPRT: USB hubs are not supported.
INVALID
The selected operation could be invalid.
[USB MODE] cannot be changed during iPod
playback.
IPD STOP: iPod playback has finished.
Operate your iPod/iPhone to start playback.
NOT SUPPORT - ANDROID MODE
A USB device not supporting AOA (Android
Open Accessory) 2.0 is connected to the unit
while [USB MODE] is set to [ANDROID].
– Set [USB MODE] to [MSC/MTP] (page 24).
USB ERROR: The USB device cannot be played.
Connect the USB device again.
USB NO DEV: A USB device is not connected or
recognized.
Make sure the USB device or USB cable is
securely connected.
USB NO MUSIC: There is no playable file.
Connect a USB device containing playable files
(page 29).
USB NO SUPRT: The USB device is not
supported.
For details on the compatibility of your USB
device, consult your nearest Alpine dealer.
or
: The beginning or the end of
the disc has been reached.
(underscore): The character cannot be
displayed.
For BLUETOOTH function:
BTA NO DEV: The BLUETOOTH device is not
connected or recognized.
Make sure the BLUETOOTH device is securely
connected, or the BLUETOOTH connection is
established with the BLUETOOTH device.
ERROR: The selected operation could not be
performed.
Wait for a while, then try again.
UNKNOWN: A name or phone number cannot
be displayed.
WITHHELD: The phone number is hidden by the
caller.
OVERLOAD: The USB device is overloaded.
Disconnect the USB device, then press
SOURCE to select another source.
The USB device has a fault, or an unsupported
device is connected.
READ: Now reading information.
Wait until reading is complete and playback
starts automatically. This may take some time
depending on the file organization.
35-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
EN
FR
ES
For Pandora® operation:
PANDORA BOOKMARK ERROR: Bookmarking
failed.
Wait for a while, then try again.
LOG IN ERROR: You are not logged into your
Pandora® account.
Disconnect the device, log into your Pandora®
account, then connect the device again.
PANDORA NO DEVICE: The BLUETOOTH device
is not connected or recognized.
Make sure the BLUETOOTH device is securely
connected, or the BLUETOOTH connection is
established with the BLUTOOTH device. Then,
select the Pandora® source again.
PANDORA NO STATIONS: No stations on your
account.
Create the station on the mobile device.
NOT ALLOWED: The selected operation is not
allowed.
”Thumbs” feedback is not allowed.
– Wait until the commercial ends.
– Some functions, such as Shared Station, do
not permit feedback. Wait until the next
track begins, or select another station on the
list.
Bookmark is not allowed.
– Wait until the commercial ends.
– Select another track or station, then try it
again.
PANDORA UNAVAILABLE: Pandora® is not
available outside your country or the selected
station is no longer available or expired.
Select another station.
PANDORA ERROR: The selected operation could
not be performed or the Pandora® server is
under maintenance.
Wait for a while, then try again.
PANDORA NOT FOUND: Pandora® is not on your
device or is not running.
Make sure the Pandora® application is installed
and running properly. Then, select the
Pandora® source again.
36-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
PANDORA BAD NETWORK: The network
connection is unstable or lost.
Make the network connection again on the
device, or wait until the network connection is
established.
SKIP LIMIT: Skipping tracks is not allowed.
Wait until the commercial end, next track
begins, or select another station on the list.
Pandora® limits the number of skips allowed
on their service.
THUMBS ERROR: “Thumbs” feedback failed.
Wait for a while, then try again.
PANDORA UPDATE APP: An old version of
Pandora® is connected.
Update the Pandora® application to the latest
version.
For SiriusXM operation:
CH LOCKED
The channel that you have requested is locked
by the radio parental control feature.
See “To set a parental control” (page 16) for
more information on the parental control
feature and how to access locked channels.
CH UNAVAIL
The channel that you have requested is not a
valid SiriusXM channel or the channel that you
were listening to is no longer available.
You may also see this message briefly when
first connecting a new SiriusXM Connect
Vehicle Tuner.
Visit www.siriusxm.com in the USA or www.
siriusxm.ca in Canada for SiriusXM channel
lineup information.
CHAN UNSUB
The channel that you have requested is not
included in your SiriusXM subscription
package or the channel that you were
listening to is no longer included in your
SiriusXM subscription package.
If you have questions about your subscription
package or would like to subscribe to this
channel, please contact SiriusXM.
In the USA, visit www.siriusxm.com or call
1-866-635-2349.
In Canada, visit www.siriusxm.ca or call 1-877438-9677.
CHK ANT
The radio has detected a fault with the
SiriusXM antenna.
The antenna cable may be either disconnected
or damaged.
– Verify that the antenna cable is connected to
the SiriusXM Connect Vehicle Tuner.
– Inspect the antenna cable for damage and
kinks.
– Replace the antenna if the cable is damaged.
SiriusXM products are available at your local
car audio retailer or online at
www.shop.siriusxm.com
– Replace the antenna if the cable is damaged.
SiriusXM products are available at your local
car audio retailer or online at
www.shop.siriusxm.com
SUBSCRIPTION UPDATED - PRESS ENT TO
CONTINUE
The radio has detected a change in your
SiriusXM subscription status.
– Press ENTER to clear the message.
If you have questions about your
subscription, please contact SiriusXM.
In the USA, visit www.siriusxm.com or call
1-866-635-2349.
In Canada, visit www.siriusxm.ca or call
1-877-438-9677.
CHECK TUNER
The radio is having difficulty communicating
with the SiriusXM Connect Vehicle Tuner.
The tuner may be disconnected or damaged.
– Verify that the SiriusXM Connect Vehicle
Tuner cable is securely connected to the
radio.
NO SIGNAL
SiriusXM Connect Vehicle Tuner is having
difficulty receiving the SiriusXM satellite signal.
– Verify that your vehicle is outdoors with a
clear view of the sky.
– Verify that the SiriusXM magnetic mount
antenna is mounted on a metal surface on
the outside of the vehicle.
– Move the SiriusXM antenna away from any
obstructions.
– Inspect the antenna cable for damage and
kinks.
– Consult the SiriusXM Connect Vehicle Tuner
installation manual for more information on
antenna installation.
37-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
EN
FR
ES
Connection/Installation
Parts List for Installation
Cautions
• Run all ground (earth) leads to a common
ground (earth) point.
• Do not get the leads trapped under a screw, or
caught in moving parts (e.g., seat railing).
• Before making connections, turn the car
ignition off to avoid short circuits.
• Connect the yellow and red power supply
leads only after all other leads have been
connected.
• Be sure to insulate any loose unconnected
leads with electrical tape for safety.
×2
5 × max. 8 mm
(7/32 × max. 5/16 in)
×4
Precautions
• Choose the installation location carefully so
that the unit will not interfere with normal
driving operations.
• Avoid installing the unit in areas subject to
dust, dirt, excessive vibration, or high
temperature, such as in direct sunlight or near
heater ducts.
• Use only the supplied mounting hardware for a
safe and secure installation.
For CDE-175BT/ CDE-172BT/ UTE-73BT
Note on the power supply lead (yellow)
When connecting this unit in combination with other
stereo components, the amperage rating of the car
circuit to which the unit is connected must be higher
than the sum of each component’s fuse amperage rating.
Mounting angle adjustment
Adjust the mounting angle to less than 30°.
38-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
• This parts list does not include all the package
contents.
• The bracket and the protection collar are
attached to the unit before shipping. Before
mounting the unit, use the release keys to
remove the bracket from the unit. For
details, see “Removing the protection collar and
the bracket” (page 43).
• Keep the release keys for future use as they
are also necessary if you remove the unit from
your car.
Connection
CDE-175BT/ CDE-172BT/ UTE-73BT
EN
Microphone*1
FR
(Blue)
To amplifier
(Orange)
To the instrument cluster
illumination lead
(Red)
(Yellow)
ES
To power antenna
(Blue/White)
Ignition Key
(Black)
Battery
Speakers
(Gray)
Front Right
(Gray/Black)
(White)
Front Left
(White/Black)
(Violet)
Rear Right
(Violet/Black)
(Green)
Rear Left
(Green/Black)
Amplifier
Subwoofers
Amplifier
Rear Speakers
Amplifier
Front Speakers
*1 Whether in use or not, route the microphone input cord such that it does not interfere with driving operations. Secure
the cord with a clamp, etc., if it is installed around your feet. For details on installing the microphone, see “Installing the
microphone (CDE-175BT/ CDE-172BT/ UTE-73BT only)” (page 42).
39-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
CDE-170
(Blue)
To power antenna
(Blue/White)
To amplifier
(Orange)
Not Used
(Red)
(Yellow)
Ignition Key
(Black)
Battery
Speakers
(Gray)
Front Right
(Gray/Black)
(White)
Front Left
(White/Black)
(Violet)
Rear Right
(Violet/Black)
(Green)
Rear Left
(Green/Black)
40-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
Amplifier
Subwoofers
Amplifier
Front Speakers
SiriusXM Tuner connector (CDE-175BT/
CDE-172BT only)
Connect to SiriusXM Tuner.
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead
of your amplifier or signal processor.
• For more information on how to install the
SiriusXM Connect Vehicle tuner, consult the
installation guide included with the tuner.
Illumination Lead (Orange) (CDE-175BT/
CDE-172BT/ UTE-73BT only)
This lead may be connected to the vehicle’s
instrument cluster illumination lead.
This will enable the vehicle’s dimmer control
to dim the backlighting of the unit.
Power Supply Connector
Fuse Holder (10A)
Fuse replacement:
When replacing the fuse, be sure to use one
matching the amperage rating stated on the
original fuse. If the fuse blows, check the
power connection and replace the fuse. If the
fuse blows again after replacement, there
may be an internal malfunction. In such a
case, consult your nearest Alpine dealer.
Fuse (10 A)
MIC Input Connector (CDE-175BT/ CDE172BT/ UTE-73BT only)
To Microphone.
Steering Remote Control Interface
Connector
To steering remote control interface box.
You can operate this unit from the vehicle’s
control unit when an Alpine Steering Remote
Control Interface Box (optional) is connected.
For details, contact your Alpine dealer.
Front Output RCA Connectors
RED is right and WHITE is left.
Rear Output RCA Connectors (CDE-175BT/
CDE-172BT/ UTE-73BT only)
RED is right and WHITE is left.
Subwoofer Output RCA Connectors
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the
vehicle’s fuse box or another unused power
source which provides (+) 12V only when the
ignition is turned on or in the accessory
position.
Battery Lead (Yellow)
Connect this lead to the positive (+) post of
the vehicle’s battery.
Ground Lead (Black)
Connect this lead to a good chassis ground
on the vehicle. Make sure the connection is
made to bare metal and is securely fastened
using the sheet metal screw provided.
Right Front (+) Speaker Output Lead (Gray)
Right Front (−) Speaker Output Lead (Gray/
Black)
Left Front (+) Speaker Output Lead (White)
Left Front (−) Speaker Output Lead (White/
Black)
Right Rear (+) Speaker Output Lead
(Violet)
Right Rear (−) Speaker Output Lead
(Violet/Black)
Left Rear (+) Speaker Output Lead (Green)
Left Rear (−) Speaker Output Lead (Green/
Black)
Antenna Receptacle
RCA Extension Cable (not supplied)
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your
power antenna, if applicable.
• This lead should be used only for controlling
the vehicle’s power antenna. Do not use this
lead to turn on an amplifier or a signal
processor, etc.
41-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
EN
FR
ES
To prevent external noise from entering
the audio system.
• Locate the unit and route the leads at least
10 cm away from the car harness.
• Keep the battery power leads as far away
from other leads as possible.
• Connect the ground lead securely to a bare
metal spot (remove any paint, dirt or grease
if necessary) of the car chassis.
• If you add an optional noise suppressor,
connect it as far away from the unit as
possible. Your Alpine dealer carries various
noise suppressors, contact them for further
information.
• Your Alpine dealer knows best about noise
prevention measures so consult your dealer
for further information.
Installing the microphone (CDE-175BT/
CDE-172BT/ UTE-73BT only)
To capture your voice during handsfree calling,
you need to install the microphone .
Clip (not supplied)
Cautions
• It is extremely dangerous if the cord becomes
wound around the steering column or
gearshift. Be sure to keep it and other parts
from interfering with your driving operations.
• If airbags or any other shock-absorbing
equipment is in your car, contact the store
where you purchased this unit, or the car
dealer, before installation.
Note
Before attaching the double-sided tape , clean the
surface of the dashboard with a dry cloth.
42-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
182 mm (7 1/4 in)
Installation
53 mm (2 1/8 in)
Removing the protection collar and the
bracket
Pinch both edges of the protection collar
, then pull it out.
EN
Catch
Before installing the unit, remove the protection
collar and the bracket from the unit.
Mount the unit onto the bracket
attach the protection collar .
, then
FR
ES
Insert both release keys until they
click, and pull down the bracket , then
pull up the unit to separate.
Notes
• If the catches are straight or bent outwards, the unit will
not be installed securely and may spring out.
• Make sure the 4 catches on the protection collar
are
properly engaged in the slots of the unit.
Mounting the unit in a Japanese car
Face the hook inwards.
Mounting the unit in the dashboard
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult
your Alpine dealer.
TOYOTA
• Before installing, make sure the catches on
both sides of the bracket are bent inwards 2
mm (3/32 in).
• For Japanese cars, see”Mounting the unit in a
Japanese car” (page 43).
to dashboard/center console
Bracket
Bracket
Position the bracket inside the
dashboard, then bend the claws outward
for a tight fit.
Existing parts supplied
with your car
43-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
NISSAN
to dashboard/center console
Bracket
Bracket
Existing parts supplied
with your car
Note
To prevent malfunction, install only with the supplied
screws .
Detaching and attaching the front
panel
For details, see “Detaching the Front Panel”
(page 10).
Resetting the unit
For details, see “Resetting the Unit” (page 10).
44-EN
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
EN
FR
ES
ALPINE CDE-175BT 68-40368Z01-C (EN) 128x182
About the Rules of Bluetooth Electromagnetic Radiation Regulation
USA/Canada
FCC/IC CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of this device.
Le présent appareil est conforme aux la partie 15 des règles de la FCC et CNR
d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de
brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
This equipment complies with FCC/IC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low
levels of RF energy that it deemed to comply without maximum permissive
exposure evaluation (MPE). But it is desirable that it should be installed and
operated keeping the radiator at least 20cm or more away from person’s body
(excluding extremities: hands, wrists, feet and ankles).
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées
pour un environnement non contrôlé et respecte les règles les radioélectriques (RF)
de la FCC lignes directrices d’exposition dans
d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement
émet une énergie RF très faible qui est considérée conforme sans évaluation de
l’exposition maximale autorisée. Cependant, cet équipement doit être installé et
utilisé en gardant une distance de 20 cm ou plus entre le dispositif rayonnant et le
corps (à l’exception des extrémités : mains, poignets, pieds et chevilles).
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
México
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es
posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este
equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda
causar su operación no deseada.
ALPINE CDE-175BT 68-40368Z01-C (EN/FR/ES) 128x182
LIMITED WARRANTY
ALPINE ELECTRONICS OF AMERICA, INC. (“Alpine”), is dedicated to quality craftsmanship and are pleased to offer this Warranty. We suggest that you read it
thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed below.
PRODUCTS COVERED:
This Warranty covers Car Audio Products and Related Accessories (“the
product”). Products purchased in the Canada are covered only in the
Canada. Products purchased in the U.S.A. are covered only in the U.S.A.
LENGTH OF WARRANTY:
This Warranty is in effect for one year from the date of the first consumer
purchase.
WHO IS COVERED:
This Warranty only covers the original purchaser of the product, who
must reside in the United States, Puerto Rico or Canada.
WHAT IS COVERED:
This Warranty covers defects in materials or workmanship (parts and
labor) in the product.
WHAT IS NOT COVERED:
This Warranty does not cover the following:
Damage occurring during shipment of the product to Alpine for
repair (claims must be presented to the carrier).
Damage caused by accident or abuse, including burned voice coils
caused by over-driving the speaker (amplifier level is turned up and
driven into distortion or clipping). Speaker mechanical failure (e.g.
punctures, tears or rips). Cracked or damaged LCD panels. Dropped or
damaged hard drives.
Damage caused by negligence, misuse, improper operation or failure
to follow instructions contained in the Owner’s manual.
Damage caused by act of God, including without limitation,
earthquake, fire, flood, storms or other acts of nature.
Any cost or expense related to the removal or reinstallation of the
product.
Service performed by an unauthorized person, company or
association.
Any product which has the serial number defaced, altered or
removed.
Any product which has been adjusted, altered or modified without
Alpine’s consent.
Any product not distributed by Alpine within the United States,
Puerto Rico or Canada.
Any product not purchased from an Authorized Alpine Dealer.
HOW TO OBTAIN WARRANTY SERVICE:
You are responsible for delivery of the product to an Authorized
Alpine Service Center or Alpine for repair and for payment of any
initial shipping charges. Alpine will, at its option, repair or replace
the product with a new or reconditioned product without charge.
If the repairs are covered by the warranty, and if the product was
shipped to an Authorized Alpine Service Center or Alpine, Alpine will
pay the return shipping charges.
You should provide a detailed description of the problem(s) for which
service is required.
You must supply proof of your purchase of the product.
You must package the product securely to avoid damage during
shipment. To prevent lost packages it is recommended to use a carrier
that provides a tracking service.
HOW WE LIMIT IMPLIED WARRANTIES:
ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR USE AND
MERCHANTABILITY ARE LIMITED IN DURATION TO THE PERIOD OF THE
EXPRESS WARRANTY SET FORTH ABOVE AND NO PERSON IS AUTHORIZED
TO ASSUME FOR ALPINE ANY OTHER LIABILITY IN CONNECTION WITH THE
SALE OF THE PRODUCT.
HOW WE EXCLUDE CERTAIN DAMAGES:
ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR INCIDENTAL AND
CONSEQUENTIAL DAMAGES CAUSED BY THE PRODUCT. THE TERM
“INCIDENTAL DAMAGES” REFERS TO EXPENSES OF TRANSPORTING THE
PRODUCT TO THE ALPINE SERVICE CENTER, LOSS OF THE ORIGINAL
PURCHASER’S TIME, LOSS OF THE USE OF THE PRODUCT, BUS FARES, CAR
RENTALS OR OTHERS COSTS RELATING TO THE CARE AND CUSTODY OF THE
PRODUCT. THE TERM “CONSEQUENTIAL DAMAGES” REFERS TO THE COST OF
REPAIRING OR REPLACING OTHER PROPERTY WHICH IS DAMAGED WHEN
THIS PRODUCT DOES NOT WORK PROPERLY. THE REMEDIES PROVIDED
UNDER THIS WARRANTY ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS.
HOW STATE/PROVINCIAL LAW RELATES TO THE WARRANTY:
This Warranty gives you specific legal rights, and you may also have
other rights which vary from state to state and province to province. In
addition, some states/provinces do not allow limitations on how long an
implied warranty lasts, and some do not allow the exclusion or limitation
of incidental or consequential damages. Accordingly, limitations as to
these matters contained herein may not apply to you.
IN CANADA ONLY:
This Warranty is not valid unless your Alpine car audio product has been
installed in your vehicle by an Authorized Installation Center, and this
warranty stamped upon installation by the installation center.
HOW TO CONTACT CUSTOMER SERVICE:
Should the product require service, please call the following number for
your nearest Authorized Alpine Service Center.
CAR AUDIO: 1-800-ALPINE-1 (1-800-257-4631)
NAVIGATION: 1-888-NAV-HELP (1-888-628-4357)
Or visit our website at; http://www.alpine-usa.com
ALPINE ELECTRONICS OF AMERICA, INC., 19145 Gramercy Place, Torrance, California 90501, U.S.A.
Do not send products to these addresses.
Call the toll free telephone number or visit the website to locate a service center.
ALPINE CDE-175BT 68-40368Z01-C (EN/FR/ES) 128x182
GARANTIE LIMITÉE
Fidèle à son engagement de ne fournir que des produits de qualité, ALPINE ÉLECTRONIQUE DE L’AMÉRIQUE, INC. (« Alpine ») est heureuse de vous offrir
cette garantie. Nous vous suggérons de le lire attentivement et en entier. Si vous avez la moindre question, veuillez contacter l’un de nos concessionnaires
ou appeler directement Alpine aux numéros listés ci-dessous.
PRODUITS COUVERTS PAR LA GARANTIE
Cette garantie couvre les produits audio de voiture et les accessoires
connexes (« le produit »). Elle ne couvre les produits que dans le pays où
ils ont été achetés.
DURÉE DE LA GARANTIE
Cette garantie est en vigueur pendant un an à partir de la date du
premier achat du client.
PERSONNES PROTÉGÉES PAR LA GARANTIE
Seul l’acheteur original du produit, s’il résisde aux États-Unis, à Porto Rico
ou au Canada, peut se prévaloir de la garantie.
CE QUI EST COUVERT
Cette garantie couvre tous les défauts de matériaux et de fabrication
(pièces et main d’œuvre) du produit.
CE QUI N’EST PAS COUVERT
Cette garantie ne couvre pas ce qui suit:
Les dommages survenus durant le transport des produits renvoyés à
Alpine pour être réparés (les réclamations doivent être adressées au
transporteur);
Les dégâts provoqués par un accident ou une mauvaise utilisation,
y compris des bobines acoustiques grillées suite à une surexcitation
des enceintes (augmentation du niveau de l’amplificateur jusqu’à
atteindre un effet de distorsion ou d’écrêtage), une défaillance
mécanique des enceintes (perforations, déchirures ou fentes),
panneaux LCD fissurés ou endommagés, disques durs endommagés
ou ayant subi une chute.
Tout dégât provoqué par négligence, usage inapproprié, mauvaise
utilisation ou par le non-respect des instructions indiquées dans le
manuel de l’utilisateur.
Les dommages dus à la force majeure, notamment aux tremblements
de terre, au feu, aux inondations, aux tempêtes ou aux autres
cataclysmes naturels;
Les frais ou les dépenses relatifs à l’enlèvement ou à la réinstallation
du produit;
Les services rendus par une personne, physique ou morale non
autorisée;
Les produits dont le numéro de série a été effacé, modifié ou retiré;
Les produits qui ont été adaptés ou modifiés sans le consentement
d’Alpine;
Les produits qui ne sont pas distribués par Alpine aux Etats-Unis, à
Porto Rico ou au Canada;
Les produits qui n’ont pas été achetés par l’entremise d’un
concessionnaire Alpine autorisé;
COMMENT SE PRÉVALOIR DE LA GARANTIE
Il vous faut remettre le produit nécessitant des réparations à un
centre de service autorisé Alpine ou à Alpine même et en assumer
les frais de transport. Alpine a le choix entre réparer le produit ou le
remplacer par un produit neuf ou révisé, le tout sans frais pour vous.
Si les réparations sont couvertes par la garantie et si le produit a été
envoyé à un centre de service Alpine ou à Alpine, le paiement des
frais de réexpédition du produit incombe Alpine.
Vous devez donner une description détaillée des problèmes qui sont
à l’origine de votre demande de réparation.
Vous devez joindre la preuve de votre achat du produit.
Vous devez emballer soigneusement le produit pour éviter tout
dommage durant son transport. Pour éviter la perte de l’envoi, il est
conseillé de choisir un transporteur qui propose un service de suivi
des envois.
LIMITATION DES GARANTIES TACITES
LA DURÉE DE TOUTES LES GARANTIES TACITES, Y COMPRIS LA GARANTIE
D’ADAPTATION À L’UTILISATION ET LA GARANTIE DE QUALITÉ LOYALE
ET MARCHANDE, EST LIMITÉE À CELLE DE LA GARANTIE EXPRESSE
DÉTERMINÉE CI-DESSUS. PERSONNE N’EST AUTORISÉ À ENGAGER
AUTREMENT LA RESPONSABILITÉ D’ALPINE EN VERTU DE LA VENTE D’UN
PRODUIT.
EXCLUSIONS DE LA GARANTIE
ALPINE STIPULE EXPRESSÉMENT QU’ELLE N’EST PAS RESPONSABLE DES
DOMMAGES-INTÉRÊTS ET DOMMAGES INDIRECTS PROVOQUÉS PAR LE
PRODUIT. LES DOMMAGES-INTÉRÊTS SONT LES FRAIS DE TRANSPORT DU
PRODUIT VERS UN CENTRE DE SERVICE ALPINE, LA PERTE DE TEMPS DE
L’ACHETEUR ORIGINAL, LA PERTE D’UTILISATION DU PRODUIT, LES BILLETS
D’AUTOBUS, LA LOCATION DE VOITURES ET TOUS LES AUTRES FRAIS LIÉS À
LA GARDE DU PRODUIT.
LES DOMMAGES INDIRECTS SONT LES FRAIS DE RÉPARATION OU DE
REMPLACEMENT D’AUTRES BIENS ENDOMMAGÉS SUITE AU MAUVAIS
FONCTIONNEMENT DU PRODUIT.
LES RECOURS PRÉVUS PAR LES PRÉSENTES EXCLUENT ET REMPLACENT
TOUTE AUTRE FORME DE RECOURS.
LIEN ENTRE LA GARANTIE ET LA LOI
La garantie vous donne des droits spécifiques, mais vous pouvez aussi
jouir d’autres droits, qui varient d’un état ou d’une province à l’autre. En
outre, certains états et certaines provinces interdisent de limiter la durée
des garanties tacites ou d’exclure les dommages accessoires ou indirects.
Dans ce cas, les limites et les exclusions de la garantie peuvent ne pas
s’appliquer à vous.
CLAUSE APPLICABLE AU CANADA SEULEMENT
Pour que la garantie soit valable, il faut qu’un centre d’installation
autorisé ait installé le système audio pour l’auto dans votre véhicule et
qu’il ait ensuite apposé son cachet sur la garantie.
NUMÉROS D’APPEL DU SERVICE À LA CLIENTÈLE
Si vous avez besoin de nos services, veuillez appeler Alpine aux numéros
ci-dessous pour le centre de service autorisé Alpine le plus proche.
AUDIO DE VOITURE : 1-800-ALPINE-1 (1-800-257-4631)
NAVIGATION : 1-888-NAV-HELP (1-888-628-4357)
Ou visitez notre site Web à l’adresse http://www.alpine-usa.com
ALPINE ÉLECTRONIQUE DE L’AMÉRIQUE, INC., 19145 Gramercy Place, Torrance, California 90501, U.S.A.
N’envoyez aucun produit à ces adresses.
Appelez notre numéro gratuit ou visitez notre site Web si vous recherchez un centre de service.
ALPINE CDE-175BT 68-40368Z01-C (EN/FR/ES) 128x182
(CDE-175BT)
(CDE-175BT/CDE-172BT)
(CDE-175BT/CDE-172BT/UTE-73BT)
(CDE-175BT/CDE-172BT/UTE-73BT)
(CDE-175BT/CDE-172BT/UTE-73BT)
(CDE-175BT/ CDE-172BT/CDE-170)
Don’t forget to take a moment to protect your purchase by registering your product now at the
following address: www.alpine-usa.com/registration.
N’oubliez pas de consacrer un moment à la protection de votre achat en enregistrant votre produit dès
maintenant à l’adresse suivante : www.alpine-usa.com/registration.
Recuerde que con solo unos pocos pasos podrá proteger su producto, registrándolo a través de la
siguiente dirección: www.alpine-usa.com/registration.
ALPINE CDE-175BT 68-40368Z01-C (EN/FR/ES) 128x182

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : Acrobat Distiller 10.1.16 (Windows)
GTS PDFX Conformance            : PDF/X-1a:2001
GTS PDFX Version                : PDF/X-1:2001
Trapped                         : False
Creator Tool                    : Adobe InDesign CS5.5 (7.5.3)
Modify Date                     : 2018:01:16 11:29:28+09:00
Create Date                     : 2017:12:08 09:49:15+09:00
Metadata Date                   : 2018:01:16 11:29:28+09:00
Format                          : application/pdf
Title                           : CDE-175BT
Creator                         : ALPINE Corporation
Version ID                      : 1
Document ID                     : uuid:87b25c87-1a3d-48ef-b012-88132681c6f8
Instance ID                     : uuid:b160d3c7-b56a-4c76-a88b-2057cbb9c50c
Page Count                      : 49
Author                          : ALPINE Corporation

EXIF Metadata provided by EXIF.tools